藏药七十味珍珠丸中微量元素的测定

用ICP - AES法测定了名贵藏药七十味珍珠丸中微量和常量元素的含量, 并结合其药效进行讨论。

内陆湖沼相和近海沼泽相沉积环境煤中微量元素和矿物的对比研究—以辽宁北票、江西建新和桥头煤研究为例

Using knowledge of geology, geochemistry, coal petrology, mineralogy, by means of a variety of advanced measuring methods such as inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled atomic emission spectrometry (ICP-AES), X-ray powder diffraction (XRD), scanning electron microscopy with energy-dispersive spectrometer(SEM-EDS), sequential chemical extract and density fractions, the characteristics of trace elements and minerals in Jurassic Beipiao coal mine under inland limnetic sedimentary environment and in late Permian Jianxin and Qiaotou coal mines under paralic swamp sedimentary environment were studied. Compared with the average concentration in the world bituminous coals, the Beipiao coal was characterized by relatively high contents of Sc, Ti, Cr, Co, Ni, Zn, Se, Sr, Zr, Y, Ba, REE and Th, and lower contents of V, Rb, Cd, Sn, Pb, Bi and U; while the Jianxin coal was relatively enriched in Li, Sc, Ga, Sr, Y, Nb, Sb, Th and U, with low concentration of Be, Co, Ni, Cu, Ge, Zr, Mo, Cd, Cs, Ba, Pb and Bi; and the Qiaotou coal was enriched in Li, Sc, Sr, Nb, Ta, Zr, REE, Hf, Th and U, with low concentration of Be, V, Co, Ni, Cu, Ge, Mo, Cd, Cs, Ba, Tl, Pb and Bi. The concentrations of Ca, Mg and K in Beipiao coal are higher than those in Jianxin coal and Qiaotou coal, while Fe, S and Ti in Beipiao coal are lower than those in Jianxin coal and Qiaotou coal. The proximate analysis of coal samples was carried out, which indicated that Beipiao coal was medium- to high- ash (5.92-60.68%) with low sulphur coal, and Jianxin coal and Qiaotou coal was medium to high ash (8.85-46.33%) with high sulphur. The reflectivity was measured, which explained that Beipiao coal belonged to high volatile bituminous coal, Jianxin coal was low volatile bituminous coal and Qiaotou coal was low volatile anthracite. Quantitative maceral analyses were studied. The characteristics of rare earth elements (REE) were investigated, which showed that the total contents of REE were higher than that of the world's average content. With the increase of coal's metamorphic grade, the total contents of REE decreased from 98.5 X 10"6 of Beipiao coal to 94.2 X 10"6 of Jianxin coal, and to 75.9 X 10"6 of Qiaotou coal, and 5Eu reduced which indicated that the element Eu depleted. The characteristics of REE was controlled by the metamorphic grade of coal. And REE were mainly absorbed in clay minerals in Beipiao coal samples, while in Jianxin and Qiaotou coal mines, REE were primarily related to clay mineral and pyrite. The variation of trace elements in vertical direction of coal seams was studied, and the results showed that different trace elements differed greatly. The correlation between trace elements and ash were determined. Four major trace elements (aluminium-silicates, sulphide, carbonate and phosphate) accounted for the occurrence and distribution of most elements studied were determined. Coal samples were separated by density fraction, which showed that Cr, Cu, Mo and Pb were closely related to inorganic matters mainly distributed in P >2.6 and dropped remarkably in the density fractions P <2.3 . The occurrences of Co, Cr, Ni, As, Se, Mo, U were studied directly and quantitatively using sequential chemical extract with six steps, which showed that Co. Ni, Mo and U were mainly in the form of mineral, and As, Se chiefly in the form of organic state, while Cr mostly in the form of organic state and mineral. Major mineral phases presented in the Beipiao coal were Kaolinite, illite, quartz, calcite, and small amount of siderite, barite. While major mineral phases in Jianxin and Qiaotou coal were pyrite, kaolinite, and small amount of marcasite, rutile, sphalerite. This is the first time that the chromite in the coal was discovered in China, which indicates that Cr occurrence appeared in the form of chromite. The ratio of Sr/Ba, Sr/Ca and V/Ni in Beipiao coal mine under inland limnetic is smaller than that of in Jianxin and Qiaotou coal mines under paralic swamp. The ratio of K/Na and Th/U of Beipiao coal mine is higher than that of Jianxin and Qiaotou coal mine, which proved that Beipiao coal was not affected by sea water and Jianxin and Qiaotou coal were affected by sea water. Trace elements such as Cr, Ni, Mo in minerals were analyzed by SEM-EDS. The factors controlling the enrichment of trace elements can be divided into syngenetic stage factors and epigenetic stage factors.

电厂燃煤中主要有害元素的种类、迁移及潜在环境影响

Distributions of elements especially hazard trace elements in coals and their wastes from a coal fired power plant have been studied in detail using knowledge of Geology, Mineralogy, Geochemistry and Environmental chemistry. The key work is on the small particle sizes of fly ashes which escaped from electric precipitator and discharged into atmosphere. By means of X-ray powder diffraction (XRD) and scanning electron microscopy with energy-dispersive spectrometer (SEM-EDS), the characteristics of minerals and morphologies were studied. Different types of fly ash were formed in different stages and processes. More than 50% of small fly ashes belonged to inhalable particles (PM10). The very fine fly ashes preferred to attach on surface of bigger fly ash or conglutinate with each other and this decreased the environmental impact of tiny fly ashes. The trace elements in coal, fly ashes, slags and small particle sizes of fly ashes had been analysed by means of Neutron Activation Analysis (INAA), inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma atomic emission spectrometry (ICP-AES). As particle sizes decreasing, distributions of most elements increased, but in contrary to most studies, this increasing trend was not very obviously because of the tendency of attachment of tiny fly ashes. The occurrence of 30 elements including hazard trace elements of Cd, Cr, Ni, Co, Pb, Zn, As, Se, Cu, V was studied by means of sequential chemical extract. The annual discharge of hazard trace elements of slag, fly ash, small fly ash (PM10), tiny fly ash (PM2.5) and air was calculated by mass balance. S, V, Cu, Pb, Se, Mo, Cd from power plant had potential impacts on environment. Hazard trace elements from the power plant had little effect on soil and aerosol comparing to those from other industrial sources and the effects were mostly on downwind direction. Both the high performance electric precipitator and high chimney made the hazard trace elements from power plant being transported far away but little environmental impacts.

典型高砷煤样品的连续浸取实验研究——兼论黔西南高砷煤中砷的赋存状态

根据以往研究 ,选取了 2个砷含量差异较大的样品 ,利用连续浸取实验 ,结合仪器中子活化分析 (INAA)、等离子原子吸收光谱 (ICP -AES)、等离子质谱 (ICP -MS)测定及X射线吸收精细结构 (XAFS)分析 ,经低温灰化 (LTA)、扫描电子显微镜 (SEM -EDX)对黔西南高砷煤中砷的赋存状态进行了研究 ,发现 5 0 %以上的砷不能被NH4 Ac、HCl、HF和HNO3 等无机试剂提取出来 ,结合以往的研究认为砷主要以高价有机砷的形式存在

地外物质中铂族等亲铁元素的分析及应用

长久以来，对于陨石金属相的全岩研究主要使用中子活化分析方法（INAA），该方法具有灵敏度高、无损样品及制样简单等优点，但它无法测定所有铂族元素（PGEs）。随着分析技术的发展，电感耦合等离子质谱（ICP-MS）越来越广泛地应用于地质学领域，但在地外物质的应用中研究较少。 本论文在分析方法上，首先在国内开展了球粒陨石金属相和铁陨石的主、微量元素的ICP-AES和ICP-MS实验分析方法研究，对四块球粒陨石的金属相以及四块铁陨石进行了分析，初步讨论了星云凝聚和小行星热变质中亲铁元素的变化特征，进一步揭示了星云的凝聚过程、以及铁陨石的结晶过程。对新发现的乌拉斯台铁陨石所做的研究表明，该陨石和新疆陨石可能为成对陨石。并将研究延伸到地外撞击事件的研究中，通过对浙江煤山P/T界线层的样品进行分析，对当时的生物大灭绝事件给出了合理解释。 乌拉斯台铁陨石是在我国新疆新发现的一块铁陨石，其发现地点距离新疆铁陨石（Armanty）约130公里。我们应用ICP-MS分析了乌拉斯台铁陨石（IIIE），以及新疆铁陨石（IIIE）、南丹铁陨石（IIICD）和Mundrabilla铁陨石（IIICD）的全岩组成，结果显示和参考文献有很好的一致性，证明了该分析方法的可行性。我们对乌拉斯台铁陨石进行了系统的岩石学、矿物学、以及微量元素分析，该陨石的岩石结构属于粗粒八面体，铁纹石带宽为1.2  0.2 mm。合纹石以各种微观结构大量存在于该陨石中。陨磷镍铁矿以富镍（30.5-55.5%）的形式出现在合纹石中，或者与陨硫铁，陨硫铬铁矿等共生。并通过计算获知该陨石的冷却速率约为20℃/Myr。其岩石矿物学特征和全岩组成和新疆铁陨石相似，二者都落在IIIE化学群的范围，因此，我们将乌拉斯台铁陨石划分为IIIE化学群，并初步认为和新疆铁陨石是成对陨石。同时，对吉林球粒陨石（H5）、安龙球粒陨石（H5）、以及南极陨石GRV 9919（L3）和GRV 021603（H3）四块球粒陨石金属相进行的研究显示，球粒陨石金属相的亲铁元素配分模式主要与元素的挥发性相关，具有难熔元素基本上平坦分布，而中等和强挥发性元素随其挥性的增高而趋于贫化的特征。 铂族元素的研究不仅在讨论星云凝聚过程中亲铁元素的分异、金属-硅酸盐分异与核-幔的形成，以及金属熔体的结晶分异方面有着重要的意义，对于讨论地外物质的示踪也有着重要的作用。铂族元素在地壳中高度亏损，但在大部分地外物质中富集，因此通常将Ir的异常已否作为是否有地外物质加入的重要依据之一。距今2.51亿年前的二叠纪-三叠纪（P/T界线）时期，发生了地质历史上最大规模的生物灭绝事件，然而对于该事件的诱因却一直存有争议，主要存在两种观点：“地外撞击”和“火山喷发”。我们使用锍镍火试金和同位素稀释法，结合Te共沉淀， 应用ICP-MS分析技术，对我国煤山二叠纪-三叠纪界线层的样品进行了Ir、Ru、Rh、Pt和Pd的测定。火试金方法结果显示Ir的含量为0.053 ng/g，而同位素稀释法对P/T界线事件层样品的分析结果显示，Ir的含量在0.005-0.028 ng/g，两种分析方法的结果均显示没有Ir的正异常。将PGE使用碳质球粒陨石标准化后，整个配分模式呈现出高度分异，Ir/Pd的比值为0.02-0.03CI，明显不同于各类陨石。相反，该界线层样品的PGE配分模式和西伯利亚玄武岩（甚至也可能和峨眉山玄武岩）相似，证明了该界线层样品中的PGE可能来源于玄武岩。P/T界线层样品中PGE的含量从富含黄铁矿的壳层24f向26层呈上升趋势，且在26层为最大值，然后在28层回落，这种趋势可能暗示了玄武岩最大规模的喷发可能出现在26层。该结果有力地证明了P/T界线时期的生物灭绝事件与火山喷发的相关性，给一直存有争议的二叠纪-三叠纪生物灭绝事件提供了新的证据。

Preparation and characterization of multi-walled carbon nanotubes supported PtRu catalysts for proton exchange membrane fuel cells

A series of PtRu nanocomposites supported on H2O2-oxidized multi-walled carbon nanotubes (MWCNTs) were synthesized via two chemical reduction methods - one used aqueous formaldehyde (HCHO method) and the other used ethylene glycol (EG method) as the reducing agents. The effects of the solvents (water and ethylene glycol) and the surface composition of the MWCNTs on the deposition and the dispersion of the metal particles were investigated using N-2 adsorption. TEM. ICP-AES. FTIR and TPD. The wetting heats of the MWCNTs in corresponding solvents were also measured. The characterizations suggest that combination of the surface chemistry of the MWCNTs with the solvents decides the deposition and the dispersion of the metal nanoparticles. These nanocomposites were evaluated as proton exchange membrane fuel cell anode catalyts for oxidation of 50 ppm CO contaminated hydrogen and compared with a commercial PtRu/C catalyst. The data reveal superior performances for the nanocomposites prepared by the EG method to those by the HCHO method and even to that for tile Commercial analogue. Structure performance relationship of the nanocomposites was also studied. (C) 2005 Elsevier Ltd. All rights reserved.

Xanthoria parietina as a biomonitor of airborne heavy metal pollution in forest sites in the North East of Morocco

Xanthoria parietina, common foliose lichen, growing in its natural habitat, was analysed for the concentration of five heavy metals (Fe, Cr, Zn, Pb and Cu) from different forest sites of North East of Morocco (Kenitra, Sidi Boughaba, Mkhinza, Ceinture Verte near Temara city, Skhirate, Bouznika and Mohammedia). The quantification was carried out by inductively coupled plasma - atomic emission spectrometry (ICP-AES). Results were highly significant p<0,001. The concentration of metals is correlated with the vehicular activity and urbanization. The total metal concentration is highest at the Kenitra area, followed by Ceinture Verte site near Temara city, which experience heavy traffic throughout the year. Scanning electron microscopy (SEM) of particulate matter on lichen of Xanthoria parietina was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminant. Analysis revealed high level of Cu, Cr, Zn and Pb in samples near roads.  

The lateritic profile of Balkouin, Burkina Faso: geochemistry, mineralogy and genesis

This study reports on the geochemical and mineralogical characterization of a lateritic profile cropping out in the Balkouin area, Central Burkina Faso, aimed at obtaining a better understanding of the processes responsible for the formation of the laterite itself and the constraints to its development. The lateritic profile rests on a Paleoproterozoic basement mostly composed of granodioritic rocks related to the Eburnean magmatic cycle passing upwards to saprolite and consists of four main composite horizons (bottom to top): kaolinite and clay-rich horizons, mottled laterite and iron-rich duricrust. In order to achieve such a goal, a multi-disciplinary analytical approach was adopted, which includes inductively coupled plasma (ICP) atomic emission and mass spectrometries (ICP-AES and ICP-MS respectively), X-ray powder diffraction (XRPD), scanning electron microscopy with energy dispersive spectrometry (SEM-EDS) and micro-Raman spectroscopy.

The geochemical data, and particularly the immobile elements distribution and REE patterns, show that the Balkouin laterite is the product of an in situ lateritization process that involved a strong depletion of the more soluble elements (K, Mg, Ca, Na, Rb, Sr and Ba) and an enrichment in Fe; Si was also removed, particularly in the uppermost horizons. All along the profile the change in composition is coupled with important changes in mineralogy. In particular, the saprolite is characterized by occurrence of abundant albitic plagioclase, quartz and nontronite; kaolinite is apparently absent. The transition to the overlying lateritic profile marks the breakdown of plagioclase and nontronite, thus allowing kaolinite to become one of the major components upwards, together with goethite and quartz. The upper part of the profile is strongly enriched in hematite (+ kaolinite). Ti oxides (at least in part as anatase) and apatite are typical accessory phases, while free aluminum hydroxides are notably absent. Mass change calculations emphasize the extent of the mass loss, which exceeds 50 wt% (and often 70 wt%) for almost all horizons; only Fe was significantly concentrated in the residual system.

The geochemical and mineralogical features suggest that the lateritic profile is the product of a continuous process that gradually developed from the bedrock upwards, in agreement with the Schellmann classic genetic model. The laterite formation must have occurred at low pH (? 4.5) and high Eh (? 0.4) values, i.e., under acidic and oxidizing environments, which allowed strongly selective leaching conditions. The lack of gibbsite and bohemite is in agreement with the compositional data: the occurrence of quartz (± amorphous silica) all along the profile was an inhibiting factor for the formation of free aluminum hydroxides.

Major and trace elements in milk and Halloumi cheese as markers for authentication of goat feeding regimes and geographical origin

Sixty samples of milk, Halloumi cheese and local grazing plants (i.e. shrubs) were collected over a year from dairy farms located on three different locations of Cyprus. Major and trace elements were quantified using inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Milk and Halloumi cheese produced in different geographical locations presented significant differences in the concentration of some of the elements analysed. Principal component analysis showed grouping of samples according to the region of production for both milk and cheese samples. These findings show that the assay of elements can provide useful fingerprints for the characterisation of dairy products.

Matéria húmica de sapal: variações estruturais e complexação com o cobre

No presente trabalho foram estudadas as variações na composição, estrutura e comportamento das substâncias húmicas sedimentares (SHS), promovidas pela presença de duas espécies de plantas da família Chenopodiacea, presentes nos sapais da Ria de Aveiro: a Halimione portulacoides e a Arthrocnemum fruticosum. Para além das variações espaciais horizontais, foram investigadas as variações ao longo de um perfil de profundidades. Desta forma, para além da camada superficial (0-10 cm) de sedimentos com diferentes espécies de plantas e sem plantas, também foram investigadas camadas de sedimentos intermédia (20-25 cm) e profunda (45-50 cm). Para a extracção das SHS recorreu-se a uma pequena modificação do método proposto pela International Humic Substances Society (IHSS) para extracção e purificação de substâncias húmicas de solos. As SH extraídas foram caracterizadas através dos métodos espectroscópicos de absorção no ultravioleta visível, de fluorescência molecular síncrona, de absorção no infravermelho com transformadas de Fourier (FTIR) e de RMN 13C em estado sólido. Estas técnicas de caracterização foram complementadas pela análise elementar e termogravimetria. Em algumas amostras, foram ainda determinados o conteúdo em alguns metais por ICP-AES e o conteúdo funcional ácido por titulações potenciométricas. Após exaustiva caracterização das amostras de AH, procedeu-se ao estudo da sua capacidade de complexação com o cobre, recorrendo a titulações monitorizadas por fluorescência molecular síncrona. Os resultados revelaram que a colonização de sedimentos por plantas vasculares superiores conduz a uma alteração profunda no ambiente sedimentar e que esta é reflectida na diagénese das substâncias húmicas sedimentares, tendo-se observado variações a uma pequena escala espacial. O estudo deste tipo de variações nunca tinha sido efectuado em trabalhos anteriores. Nos ácidos fúlvicos detectaram-se diferenças na composição e estrutura das amostras correspondentes às camadas superiores de sedimentos, reflectindo a presença de diferentes colonizações vegetais. Relativamente aos ácidos húmicos, foi possível classificá-los em dois tipos distintos. Os AH do tipo I correspondem aos sedimentos superficiais e intermédios dos locais com plantas. Neste tipo de AH verificou-se uma incorporação de polissacarídeos e estruturas peptídicas, em estados de humificação pouco desenvolvidos. Os AH do tipo II correspondem aos sedimentos mais profundos de todos os locais e aos intermédios do local sem plantas e caracterizam-se por um maior grau de humificação e polimerização, um maior conteúdo aromático e de estruturas conjugadas e um maior conteúdo de grupos carboxílicos. Essas diferenças estruturais conduzem a diferentes comportamentos ácido/base e de complexação com o cobre. Assim, os AH do tipo I, que apresentam sinais espectroscópicos mais baixos associados a grupos carboxílicos e fenólicos, têm menor conteúdo de grupos funcionais ácidos e menor capacidade de complexação com o cobre quando se consideram ligandos característicos de unidades aromáticas conjugadas. Relativamente aos valores de log K dos complexos de AHS com o cobre, as amostras representativas da camada superficial dos sedimentos com plantas apresentaram valores superiores aos das restantes amostras de AH estudadas, cujos valores de log K são similares entre si. Atendendo aos resultados de análise elementar e espectroscópica, este facto pode estar associado à presença de compostos de azoto não peptídicos. Quanto a outros ligandos para o cobre, nomeadamente os representativos de estruturas peptídicas contendo o aminoácido triptofano e estruturas aromáticas simples, não foi possível obter resultados conclusivos. Dado que os ácidos húmicos do tipo I demonstraram um maior conteúdo peptídico e menor conteúdo aromático, o estudo destes ligandos torna-se importante para compreender melhor o efeito da presença de plantas nos sedimentos de sapal sobre o comportamento dos ácidos húmicos sedimentares como ligandos para o cobre. Refere-se ainda que foram detectadas certas especificidades na variação das características do sedimento e das substâncias húmicas com a profundidade nos diferentes locais estudados que não podem ser explicadas meramente com a presença de material vegetal oriundo de diferentes espécies de plantas, requerendo um conhecimento mais aprofundado das comunidades bentónicas e do ambiente físico-químico do sedimento.

Application of thermal ion-molecule reactions in tackling spectroscopic inferences in inductively coupled plasma mass spectrometry

Part I: Ultra-trace determination of vanadium in lake sediments: a performance comparison using O2, N20, and NH3 as reaction gases in ICP-DRC-MS Thermal ion-molecule reactions, targeting removal of specific spectroscopic interference problems, have become a powerful tool for method development in quadrupole based inductively coupled plasma mass spectrometry (ICP-MS) applications. A study was conducted to develop an accurate method for the determination of vanadium in lake sediment samples by ICP-MS, coupled with a dynamic reaction cell (DRC), using two differenvchemical resolution strategies: a) direct removal of interfering C10+ and b) vanadium oxidation to VO+. The performance of three reaction gases that are suitable for handling vanadium interference in the dynamic reaction cell was systematically studied and evaluated: ammonia for C10+ removal and oxygen and nitrous oxide for oxidation. Although it was able to produce comparable results for vanadium to those using oxygen and nitrous oxide, NH3 did not completely eliminate a matrix effect, caused by the presence of chloride, and required large scale dilutions (and a concomitant increase in variance) when the sample and/or the digestion medium contained large amounts of chloride. Among the three candidate reaction gases at their optimized Eonditions, creation of VO+ with oxygen gas delivered the best analyte sensitivity and the lowest detection limit (2.7 ng L-1). Vanadium results obtained from fourteen lake sediment samples and a certified reference material (CRM031-040-1), using two different analytelinterference separation strategies, suggested that the vanadium mono-oxidation offers advantageous performance over the conventional method using NH3 for ultra-trace vanadium determination by ICP-DRC-MS and can be readily employed in relevant environmental chemistry applications that deal with ultra-trace contaminants.Part II: Validation of a modified oxidation approach for the quantification of total arsenic and selenium in complex environmental matrices Spectroscopic interference problems of arsenic and selenium in ICP-MS practices were investigated in detail. Preliminary literature review suggested that oxygen could serve as an effective candidate reaction gas for analysis of the two elements in dynamic reaction cell coupled ICP-MS. An accurate method was developed for the determination of As and Se in complex environmental samples, based on a series of modifications on an oxidation approach for As and Se previously reported. Rhodium was used as internal standard in this study to help minimize non-spectral interferences such as instrumental drift. Using an oxygen gas flow slightly higher than 0.5 mL min-I, arsenic is converted to 75 AS160+ ion in an efficient manner whereas a potentially interfering ion, 91Zr+, is completely removed. Instead of using the most abundant Se isotope, 80Se, selenium was determined by a second most abundant isotope, 78Se, in the form of 78Se160. Upon careful selection of oxygen gas flow rate and optimization ofRPq value, previous isobaric threats caused by Zr and Mo were reduced to background levels whereas another potential atomic isobar, 96Ru+, became completely harmless to the new selenium analyte. The new method underwent a strict validation procedure where the recovery of a suitable certified reference material was examined and the obtained sample data were compared with those produced by a credible external laboratory who analyzed the same set of samples using a standardized HG-ICP-AES method. The validation results were satisfactory. The resultant limits of detection for arsenic and selenium were 5 ng L-1 and 60 ng L-1, respectively.

Détermination du béryllium dans les cheveux humains non exposés, les poils et les os de souris exposées à des poussières de béryllium

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Synthesis of ZnO nanoparticles by hydrothermal method

Stable, OH free zinc oxide (ZnO) nanoparticles were synthesized by hydrothermal method by varying the growth temperature and concentration of the precursors. The formation of ZnO nanoparticles were confirmed by x-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED) studies. The average particle size have been found to be about 7-24 nm and the compositional analysis is done with inductively coupled plasma atomic emission spectroscopy (ICP-AES). Diffuse reflectance spectroscopy (DRS) results shows that the band gap of ZnO nanoparticles is blue shifted with decrease in particle size. Photoluminescence properties of ZnO nanoparticles at room temperature were studied and the green photoluminescent emission from ZnO nanoparticles can originate from the oxygen vacancy or ZnO interstitial related defects.

OFFLINE AND ONLINE SOLID PHASE EXTRACTION/PRECONCENTRATION OF INORGANICS

Solid phase extraction (SPE) is a powerful technique for preconcentration/removal or separation of trace and ultra trace amounts of toxic and nutrient elements. SPE effectively simplifies the labour intensive sample preparation, increase its reliability and eliminate the clean up step by using more selective extraction procedures. The synthesis of sorbents with a simplified procedure and diminution of the risks of errors shows the interest in the areas of environmental monitoring, geochemical exploration, food, agricultural, pharmaceutical, biochemical industry and high purity metal designing, etc. There is no universal SPE method because the sample pretreatment depends strongly on the analytical demand. But there is always an increasing demand for more sensitive, selective, rapid and reliable analytical procedures. Among the various materials, chelate modified naphthalene, activated carbon and chelate functionalized highly cross linked polymers are most important. In the biological and environmental field, large numbers of samples are to be analysed within a short span of time. Hence, online flow injection methods are preferred as they allow extraction, separation, identification and quantification of many numbers of analytes. The flow injection online preconcentration flame AAS procedure developed allows the determination of as low as 0.1 µg/l of nickel in soil and cobalt in human hair samples. The developed procedure is precise and rapid and allows the analysis of 30 samples per hour with a loading time of 60 s. The online FI manifold used in the present study permits high sampling, loading rates and thus resulting in higher preconcentration/enrichment factors of -725 and 600 for cobalt and nickel respectively with a 1 min preconcentration time compared to conventional FAAS signal. These enrichment factors are far superior to hitherto developed on line preconcentration procedures for inorganics. The instrumentation adopted in the present study allows much simpler equipment and low maintenance costs compared to costlier ICP-AES or ICP-MS instruments.

A preliminary investigation into mining and smelting impacts on trace element concentrations in the soils and vegetation around Tharsis, SW Spain

Toxic trace elements present an environmental hazard in the vicinity of mining and smelting activities. However. the processes of transfer of these elements to groundwater and to plants are not always clear. Tharsis mine. in the Iberian pyrite belt (SW Spain), has been exploited since 2500 BC, with extensive smelting, taking place front the 1850S until the 1920s. Sixty four soil (mainly topsoils) and vegetation samples were collected in February 2001 and analysed by ICP-AES for 23 elements. Concentrations are 6-6300 mg kg(-1) As and 14-24800 mg kg(-1) Pb in soils, and 0.20-9 mg kg(-1) As and 2-195 mg Pb in vegetation. Trace element concentrations decrease rapidly away from the mine. with As and Pb concentrations in the range 6-1850 mg kg(-1) (median 22 mg kg(-1)) and 14-31 mg, kg(-1) (median 43 mg, kg(-1)), respectively, 1 km away from the mine. These concentrations are low when compared to other well-studied mining and smelting areas (e.g. 600 mg kg(-1) As at 8 km from Yellowknife smelter, Canada; >100 mg kg(-1) Pb over 270 km(2) around the Pb-Zn Port Pirie smelter. South Australia: mean of 1419 mg kg(-1) Pb around Aberystwyth smelter, Wales, UK). The high metal content of the vegetation and the low soil pH (mean pH 4.93) indicate the potential for trace element mobility which Could explain the relatively low concentration of metals in Tharsis topsoils and cause threats to plans to redevelop the Tharsis area as an orange plantation.