KPC-PRODUCING Serratia marcescens IN A HOME-CARE PATIENT FROM RECIFE, BRAZIL

SUMMARY In this brief communication we describe the occurrence of a KPC-producing Serratia marcescensisolate in a home-care patient from Recife, Brazil. The blaKPC, blaSPM, blaIMP, blaVIMblaOXA, blaCTX-M, blaSHV, blaTEM and blaGES genes were investigated by Polymerase Chain Reaction (PCR) and DNA sequencing. The isolate was positive for blaKPC-2 and blaTEM-1 and was resistant to aztreonam, cefepime, cefotaxime, imipenem, meropenem, gentamicin, ciprofloxacin and cefazidime, and susceptible only to amikacin, tigecycline and gatifloxacin. This is the first report in Brazil of KPC-producing S. marcescens clinical isolate outside of a hospital environment. Caregivers should be alert for the presence of this isolate in the community setting.

ANTIFUNGAL ACTIVITY OF Cymbopogon nardus (L.) Rendle (CITRONELLA) AGAINST Microsporum canis FROM ANIMALS AND HOME ENVIRONMENT

Dermatophytosis is a common zoonosis in urban centers. Dogs and cats have played an important role as its disseminators. Environmental decontamination is essential for the prevention of its propagation to humans and animals. However, sanitizers or disinfectants with antifungal activity, currently available, have high toxicity. The present study evaluated the in vitro effects of an extract of citronella (Cymbopogon nardus) on 31 Microsporum canis isolates from animals and home environments. Susceptibility tests were performed based on document M38-A2 (2008) of the Clinical and Laboratory Standards Institute with modifications for natural products. Although susceptibility variation was observed between the fungus tested, the concentrations that inhibited the growth of 50 and 90% of the microorganisms were low (19.5 and 78 µg/mL, respectively). Thus, this citronella extract showed potent fungistatic and fungicide activities against M. canis isolated from animals and home environments. Therefore, it could be an alternative for dermatophytosis prophylaxis in the home environment.

Measuring poverty in Portugal: an absolute approach

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Nursing Home-Acquired Pneumonia Presenting at the Emergency Department

Nursing home-acquired pneumonia (NHAP) is one of the most common infections arising amongst nursing home residents, and its incidence is expected to increase as population ages. The NHAP recommendation for empiric broad-spectrum antibiotic therapy, arising from the concept of healthcare-associated pneumonia, has been challenged by recent studies reporting low rates of multidrug-resistant (MDR) bacteria. This single center study analyzes the results of NHAP patients admitted through the Emergency Department (ED) at a tertiary center during the year 2010. There were 116 cases, male gender corresponded to 34.5 % of patients and median age was 84 years old (IQR 77-90). Comorbidities were present in 69.8 % of cases and 48.3 % of patients had used healthcare services during the previous 90 days. In-hospital mortality rate was 46.6 % and median length-of-stay was 9 days. Severity assessment at the Emergency Department provided CURB65 index score and respective mortality (%) results: zero: n = 0; one: n = 7 (0 %); two: n = 18 (38.9 %); three: n = 26 (38.5 %); four: n = 30 (53.3 %); and five; n = 22 (68.2 %); and sepsis n = 50 (34.0 %), severe sepsis n = 43 (48.8 %) and septic shock n = 22 (72.7 %). Significant risk factors for in-hospital mortality in multivariate analysis were polypnea (p = 0.001), age ≥ 75 years (p = 0.02), and severe sepsis or shock (p = 0.03) at the ED. Microbiological testing in 78.4 % of cases was positive in 15.4 % (n = 15): methicillin-resistant Staphylococcus aureus (26.7 %), Pseudomonas aeruginosa (20.0 %), S. pneumoniae (13.3 %), Escherichia coli (13.3 %), others (26.7 %); the rate of MDR bacteria was 53.3 %. This study reveals high rates of mortality and MDR bacteria among NHAP hospital admissions supporting the use of empirical broad-spectrum antibiotic therapy in these patients.

The role of integrated home-based care in patient adherence to antiretroviral therapy

Non-adherence is one of the primary obstacles to successful antiretroviral therapy in HIV+ patients worldwide. In Brazil, the Domiciliary Therapeutic Assistance is a multidisciplinary and integrated home-based assistance program provided for HIV+ patients confined in their homes due to physical deficiency. This study investigated ADT's ability to monitor and promote appropriate adherence to ARV therapy. Fifty-six individuals were recruited from three study groups: Group 1 - patients currently in the ADT program, Group 2 - 21 patients previously treated by the ADT program, and Group 3 - 20 patients who have always been treated using conventional ambulatory care. Using multivariable self-reporting to evaluate adherence, patients in the ADT program had significantly better adherence than patients in ambulatory care (F = 6.66, p = 0.003). This effect was independent of demographic and socioeconomic characteristics as well as medical history. Patients in the ADT program also showed a trend towards greater therapeutic success than ambulatory patients. These results suggest the incorporation of characteristics of ADT in conventional ambulatory care as a strategy to increase adherence to ARV therapy.

Options and Requirements for a potential market entry into Portugal with renewable energy technologies that are applicable for heating and cooling of buildings

NSBE-UNL

Home Banking

The object of this dissertation is focused on the study of the home banking service and how the allocation of losses due to computer fraud is processed in the scope of this service. When considering the questions raised by the allocation of losses associated with fraudulent operations, it is important to consider, mainly, the behaviour of the user of the home banking service. In our opinion, courts have been too demanding towards the user when judging his action in the use of this service. In this study, we have concluded that, when the user “falls” into a computer fraud scheme, he should not be liable for gross negligent behaviour, even if, due to the fraud, the user revealed all his access codes to a hacker on a page similar to that of his bank. In general, such facts will not be sufficient to qualify the user’s action as grossly negligent. Therefore, the user, under the terms of the Payment Services’ System, must bear the loss up to a maximum of €150, and the bank will face the remainder of the losses. However, if the user, victim of a fraudulent technique, ignored the safety warnings issued by the bank, one must consider, given the specific case, that he contributed to gross negligence in unauthorised payment transactions. Thus, the user must bear all the losses up to the moment when he notifies the bank about the unauthorised transactions. It is the bank’s responsibility to, given the specific case, adduce evidence of the client’s contribution to the identified losses.

Value creation in the nursing home real estate investment market - A case study

The underlying thesis examines the value drivers of direct investments in nursing home real estate in Germany. A survey among investors and operators is conducted in order to identify significant value drivers. Moreover, based on survey results, a framework for assessing German nursing home real estate is developed. This is applied in a case-study about the set-up of a nursing home value-add fund which will demonstrate the value creation process of redeveloping an existing nursing home real estate portfolio. Through a concluding analysis the sources of value creation, sensitivities and future prospects of direct investing into German nursing home real estate are concluded.

Measuring poverty in Portugal: An absolute approach

The aim of this article is to measure poverty in Portugal from an absolute perspective. We estimated several absolute poverty lines and defined maximum and minimum thresholds. We applied aggregation measures to these thresholds and constructed probit models to assess the effect of some variables on poverty. The intervals obtained contain the poverty lines constructed by other approaches. We got evidence that poverty is positively correlated with the number of people in the household, with living alone; negatively correlated with the number of workers in the household, the share on non-food expenditure and the existence of a heating device at home.

Bidirectional battery charger with grid-to-vehicle, vehicle-to-grid and vehicle-to-home technologies

This paper presents the development of na on-board bidirectional battery charger for Electric Vehicles (EVs) targeting Grid-to-Vehicle (G2V), Vehicle-to-Grid (V2G), and Vehicle-to-Home (V2H) technologies. During the G2V operation mode the batteries are charged from the power grid with sinusoidal current and unitary power factor. During the V2G operation mode the energy stored in the batteries can be delivered back to the power grid contributing to the power system stability. In the V2H operation mode the energy stored in the batteries can be used to supply home loads during power outages, or to supply loads in places without connection to the power grid. Along the paper the hardware topology of the bidirectional battery charger is presented and the control algorithms are explained. Some considerations about the sizing of the AC side passive filter are taken into account in order to improve the performance in the three operation modes. The adopted topology and control algorithms are accessed through computer simulations and validated by experimental results achieved with a developed laboratory prototype operating in the different scenarios.

Development and psychometric properties of ECPICID-AVC to measure informal caregivers’ skills when caring for older stroke survivors at home

Introduction: Informal caregivers provide a significant part of the total care needed by dependent older people poststroke. Although informal care is often the preferred option of those who provide and those who receive informal care, informal caregivers often report lack of preparation to take care of older dependent people. This article outlines the development and psychometric testing of informal caregivers’ skills when providing care to older people after a stroke – ECPICID-AVC. Design: Prospective psychometric instrument validation study. Methods: Eleven experts participated in a focus group in order to delineate, develop and validate the instrument. Data were gathered among adult informal caregivers (n = 186) living in the community in Northern Portugal from August 2013 to January 2014. Results: The 32-item scale describes several aspects of informal caregiver’s skills. The scale has eight factors: skill to feed/hydrate by nasogastric feeding, skill to assist the person in personal hygiene, skill to assist the person for transferring, skill to assist the person for positioning, skill to provide technical aids, skill to assist the person to use the toilet, skill to feed/hydrate and skill to provide technical aids for dressing/undressing. Analysis demonstrated adequate internal consistency (Cronbach’s alpha = 0.83) and good temporal stability 0.988 (0.984–0.991). Conclusion: The psychometric properties of the measurement tool showed acceptable results allowing its implementation in clinical practice by the nursing community staff for evaluating practical skills in informal caregivers when providing care to older stroke survivors living at home.

Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications

Increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials mitigates heat loss in buildings, therefore minimising heat energy needs. In recent years, several papers were published on the subject of foam alkali-activated cements with enhanced thermal conductivity. However, on those papers cost analysis was strangely avoided. This paper presents experimental results on one-part alkali-activated cements. It also includes global warming potential assessment and cost analysis. Foam one-part alkali-activated cements cost simulations considering two carbon dioxide social costs scenarios are also included. The results show that one-part alkali-activated cements mixtures based on 26%OPC + 58.3%FA + 8%CS + 7.7%CH and 3.5% hydrogen peroxide constitute a promising cost-efficient (67 euro/m3), thermal insulation solution for floor heating systems. This mixture presents a low global warming potential of 443 KgCO2eq/m3. The results confirm that in both carbon dioxide social cost scenarios the mixture 26 OPC + 58.3 FA + 8 CS + 7.7 CH with 3.5% hydrogen peroxide foaming agent is still the most cost efficient.

Production of whey protein-based aggregates under ohmic heating

Formation of whey protein isolate protein aggregates under the influence of moderate electric fields upon ohmic heating (OH) has been monitored through evaluation of molecular protein unfolding, loss of its solubility, and aggregation. To shed more light on the microstructure of the protein aggregates produced by OH, samples were assayed by transmission electron microscopy (TEM). Results show that during early steps of an OH thermal treatment, aggregation of whey proteins can be reduced with a concomitant reduction of the heating chargeby reducing the come-up time (CUT) needed to reach a target temperatureand increase of the electric field applied (from 6 to 12 V cm1). Exposure of reactive free thiol groups involved in molecular unfolding of -lactoglobulin (-lg) can be reduced from 10 to 20 %, when a CUT of 10 s is combined with an electric field of 12 V cm1. Kinetic and multivariate analysis evidenced that the presence of an electric field during heating contributes to a change in the amplitude of aggregation, as well as in the shape of the produced aggregates. TEM discloses the appearance of small fibrillar aggregates upon the influence of OH, which have recognized potential in the functionalization of food protein networks. This study demonstrated that OH technology can be used to tailor denaturation and aggregation behavior of whey proteins due to the presence of a constant electric field together with the ability to provide a very fast heating, thus overcoming heat transfer limitations that naturally occur during conventional thermal treatments.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.