Avaliação de parentais e híbridos experimentais de melão rendilhado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção e qualidade de melão rendilhado sob diferentes substratos em cultivo protegido

This paper aimed to evaluate the performance of hybrids of muskmelon on different substrates. Five substrates were evaluated: S(1) = coconut husk fiber, S(2) = sand; S(3) = 1/2 sand and 1/2 crushed of sugarcane, S(4) = 1/2 sand and 1/2 of peanut shell, and S(5) = 1/3 sand, 1/3 of crushed sugarcane and I of peanut shell and four hybrids of muskmelon (Bonus N(o). 2, Louis, Fantasy Jab and 2007 # 16). The plants were cultivated in plastic pots of 13 dm(3), which were filled with these substrates; they were arranged in plants spacing of 1,0 x 0,5 m between plants. The Fertirrigation was done by dripping, using a nutrient solution for the culture. The experimental design was a randomized blocks, in a 5 X 4 factorial design with four replications. The characteristics evaluated were: total production, average transverse and longitudinal diameter of fruit, fruit shape index; mesocarp thickness; average transverse and longitudinal diameter of the locule; index format locule; mass of fresh fruit; soluble solids, pH; titratable acidity; C vitamin; firmness of flesh; tracery of shell; and maturation index. The optimal substrate for muskmelon cultivation is a combination of 50% sand + 50% peanut shell. The hybrid Fantasy performed better compared to other hybrids.

Qualidade de frutos de cinco híbridos de melão rendilhado em função do número de frutos por planta

Este trabalho teve por objetivo avaliar a qualidade de cinco híbridos de melão rendilhado, com dois e três frutos por planta, utilizando fibra da casca de coco e fertirrigação. Para tanto, foi instalado um experimento em casa de vegetação na UNESP-FCAV, Câmpus de Jaboticabal, com delineamento experimental em blocos ao acaso, em esquema fatorial 5 x 2, com quatro repetições. Os fatores avaliados foram cinco híbridos de melão rendilhado (Maxim, Bônus nº 2, Shinju 200, Fantasy e Louis) e número de frutos por planta (2 ou 3 frutos). Os frutos foram colhidos quando atingiram o máximo do desenvolvimento. Foram avaliados: sólidos solúveis, acidez titulável, pH, vitamina C e massa média dos frutos. Para todas as características avaliadas, não houve interação entre híbridos e o número de frutos por planta. Com base nos resultados obtidos, conclui-se que o híbrido Bônus nº 2 apresentou o maior número de características qualitativas desejáveis quando cultivada sob ambiente protegido, utilizando fibra da casca de coco e fertirrigação. O número de frutos por planta não afetou as características qualitativas avaliadas, exceto o teor de sólidos solúveis e massa média dos frutos, sendo maior quando deixados dois frutos por planta.

Desempenho de linhagens de melão rendilhado em casa de vegetação

Avaliaram-se 20 linhagens de melão rendilhado, obtidas em programa de melhoramento genético do meloeiro da UNESP, com relação às características associadas à produção e qualidade dos frutos. O experimento foi conduzido em casa de vegetação da UNESP em Jaboticabal, de junho de 2001 a dezembro de 2002. Utilizou-se o delineamento de blocos ao acaso com 20 tratamentos (linhagens), em quatro repetições. Cada parcela foi composta por oito plantas no espaçamento 0,5 x 1,0 m. Foram avaliados a produtividade (g/m²), peso médio, diâmetro transversal e longitudinal do lóculo e do fruto, índice de formato do fruto, espessura e coloração do mesocarpo e do epicarpo e teor de sólidos solúveis (ºBrix) dos frutos. As linhagens JAB-24-3, JAB-24-4, JAB-24-5, JAB-24-7, JAB-24-8, JAB-24-9, JAB-24-11, JAB-24-12, JAB-24-13, JAB-24-14, JAB-24-15, JAB-24-18 e JAB-24-20 se destacaram das demais na maioria das características avaliadas, demonstrando bom potencial para obtenção de híbridos comerciais.

Cultivo de melão rendilhado com dois e três frutos por planta

O objetivo deste trabalho foi avaliar cultivares de melão rendilhado produzidas em plantas sob raleio dos frutos. Foram estudadas as cultivares Maxim, Louis, Fantasy, Shinju 200, e Bônus nº2, com as plantas conduzidas com dois e três frutos. O delineamento experimental foi em blocos ao acaso, em esquema fatorial 5x2, com quatro repetições e com as plantas dispostas no espaçamento de 1,0 m entre linhas e 0,5 m entre plantas. O experimento foi realizado em casa de vegetação, utilizando-se fertirrigação e vasos plásticos de 13 L, preenchidos com fibra da casca de coco Golden Mix® Misto 98. As mudas foram produzidas em bandejas de poliestireno expandido de 128 células e quando estavam com a primeira folha definitiva completamente desenvolvida foram transplantadas aos vasos. Foram avaliados o rendilhamento da casca, os diâmetros longitudinal e transversal do fruto, o índice de formato do fruto, os diâmetros longitudinal e transversal do lóculo, o índice de formato do lóculo, a espessura do mesocarpo, a massa média dos frutos e a produção por planta. Não houve interação entre os fatores estudados. Nas condições deste experimento, a condução de dois frutos por planta resultou em maior rendilhamento da casca, maior diâmetro transversal do fruto, maior diâmetro longitudinal do lóculo e maior massa média dos frutos. Porém, as maiores produções por planta foram observadas quando conduzidas com três frutos. Os híbridos Fantasy e Shinju 200 apresentaram as melhores características de frutos e maiores produções.

Qualidade de melão rendilhado (Cucumis melo L.) em função do sistema de cultivo

Objetivou-se com este trabalho avaliar a qualidade de frutos de cinco cultivares de melão rendilhado (Cucumis melo L.), cultivados em casa de vegetação, em função do sistema de produção. O experimento foi instalado em casa de vegetação na UNESP-FCAV, Jaboticabal-SP, no período de novembro de 2005 à fevereiro de 2006. O experimento foi delineado em esquema fatorial 5 X 2, em blocos casualizados com quatro repetições. Os tratamentos resultaram da combinação de cinco híbridos de melão rendilhado: Maxim, Bônus 2, Shinju 200, Fantasy e Louis e dois sistemas de cultivo: no solo e em substrato de fibra da casca de coco. As características avaliadas foram: massa fresca do fruto, espessura de mesocarpo, intensidade de rendilhamento da casca, pH, sólidos solúveis totais, acidez titulável, índice de maturação (RATIO), e vitamina C. Não houve interação significativa entre os sistemas de cultivo e cultivares para nenhuma das características avaliadas. O cultivo de melão em substrato resultou em frutos com qualidade superior ao cultivo em solo. Os híbridos Louis e Fantasy foram os que apresentaram melhor desempenho qualitativo de frutos.

Validação de instrumentos para avaliação do conhecimento e da habilidade acerca da higienização simples das mãos

Conselho Nacional de Desenvolvimento Científico e Tecnológico

MYCELIAL DEVELOPMENT of Lentinula edodes IN CULTURE MEDIA WITH DIFFERENT ORGANIC SUBSTRATES

The radial mycelial growth of Lentinula edodes (Berk) Pegler, strain LE-96/13, was studied in culture media prepared with organic residues extract, by using substrates prepared with pineapple (Ananas comosus (L.) Merril) crown, Astrocaryum aculeatum Meyer peel, Theobroma grandiflorum Schum shell, Musa sp. (genomic group AAB, subgroup Pacovan) peel, and Musa sp. (genomic group AAB, subgroup Praia) peel, with three supplementation levels with wheat bran (0, 10 and 20%), and incubated at 25 degrees C. The experimental design was totally randomized, in a 5x3 factorial scheme, adding up 15 treatments with 4 repetitions, and each repetition corresponding to a Petri dish. The diameter of the colony was evaluated daily during nine days of incubation. After that period, it was verified that the highest mycelial growth averages of strain LE-96/13 of L. edodes were found in culture media prepared with T. grandiflorum Schum shell (whose supplementation with wheat bran was favorable for Mushroom development) and A. aculeatum Meyer peel (whose supplementation did not favor the mycelial growth of L. edodes in relation to the medium not supplemented).

Applicability of the use of waste from different banana cultivars for the cultivation of the oyster mushroom

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system

Degradação fotoquímica de hidrocarbonetos da gasolina em efluentes aquosos

Photo-oxidation processes of toxic organic compounds have been widely studied. This work seeks the application of the photo-Fenton process for the degradation of hydrocarbons in water. The gasoline found in the refinery, without additives and alcohol, was used as the model pollutant. The effects of the concentration of the following substances have been properly evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM) and sodium chloride (200 2000 ppm). The experiments were accomplished in reactor with UV lamp and in a falling film solar reactor. The photo-oxidation process was monitored by measurements of the absorption spectra, total organic carbon (TOC) and chemical oxygen demand (COD). Experimental results demonstrated that the photo-Fenton process is feasible for the treatment of wastewaters containing aliphatic hydrocarbons, inclusive in the presence of salts. These conditions are similar to the water produced by the petroleum fields, generated in the extraction and production of petroleum. A neural network model of process correlated well the observed data for the photooxidation process of hydrocarbons

Degradação foto-fenton de carbono orgânico total em efluentes da indústria de beneficiamento de castanha de caju

At the cashew nut processing industry it is often the generation of wastewaters containing high content of toxic organic compounds. The presence of these compounds is due mainly to the so called liquid of the cashew nut (CNSL). CNSL, as it is commercially known in Brazil, is the liquid of the cashew nut. It looks like an oil with dark brown color, viscous and presents a high toxicity index due to the chemical composition, i.e. phenol compounds, such as anacardic acid, cardol, 2-methyl cardol and monophenol (cardanol). These compounds are bio resistant to the conventional treatments. Furthermore, the corresponding wastewaters present high content of TOC (total organic carbon). Therefore due to the high degree of toxicity it is very important to study and develop treatments of these wastewaters before discharge to the environmental. This research aims to decompose these compounds using advanced oxidative processes (AOP) based on the photo-Fenton system. The advantage of this system is the fast and non-selective oxidation promoted by the hydroxyl radicals (●OH), that is under determined conditions can totally convert the organic pollutants to CO2 and H2O. In order to evaluate the decomposition of the organic charge system samples of the real wastewater od a processing cashew nut industry were taken. This industry was located at the country of the state of Rio Grande do Norte. The experiments were carried out with a photochemical annular reactor equipped with UV (ultra violet) lamp. Based on preliminary experiments, a Doehlert experimental design was defined to optimize the concentrations of H2O2 and Fe(II) with a total of 13 runs. The experimental conditions were set to pH equal to 3 and temperature of 30°C. The power of the lamps applied was 80W, 125W and 250W. To evaluate the decomposition rate measures of the TOC were accomplished during 4 hours of experiment. According to the results, the organic removal obtained in terms of TOC was 80% minimum and 95% maximum. Furthermore, it was gotten a minimum time of 49 minutes for the removal of 30% of the initial TOC. Based on the obtained experimental results, the photo-Fenton system presents a very satisfactory performance as a complementary treatment of the wastewater studied

Estudo da remoção de compostos orgânicos, benzeno e tolueno, em solução aquosa por processo oxidativo avançado do tipo Fenton

The oil and petrochemical industry is responsable to generate a large amount of waste and wastewater. Among some efluents, is possible find the benzene, toluene, ethilbenze and isomers of xilenes compounds, known as BTEX. These compounds are very volatily, toxic for environment and potencially cancerigenous in man. Oxidative advanced processes, OAP, are unconventional waste treatment, wich may be apply on treatment and remotion this compounds. Fenton is a type of OAPs, wich uses the Fenton s reactant, hydrogen peroxide and ferrous salt, to promove the organic degradation. While the Photo-Fenton type uses the Fenton s reactant plus UV radiation (ultraviolet). These two types of OAP, according to literature, may be apply on BTEX complex system. This project consists on the consideration of the utilization of technologies Fenton and Photo-Fenton in aqueous solution in concentration of 100 ppm of BTEX, each, on simulation of condition near of petrochemical effluents. Different reactors were used for each type of OAP. For the analyticals results of amount of remotion were used the SPME technique (solid phase microextraction) for extraction in gaseous phase of these analytes and the gas chromatography/mass espectrometry The arrangement mechanical of Photo-Fenton system has been shown big loss by volatilization of these compounds. The Fenton system has been shown capable of degradate benzene and toluene compounds, with massic percentage of remotion near the 99%.

Equilíbrio líquido-líquido para o sistema biodiesel de óleo de semente de melão (Cucumis melo l.) + metanol + glicerina

Rio Grande do Norte, northeast state from Brazil, it is the greatest producer and exporter of yellow melon, well known as Spanish melon. Despite the consumption of this fruit to be mainly its pulp, melon seeds are an important source of lipids considered an industrial residue it has been discharge product. The use of oilseeds in order to produce biodiesel establishes an important raw material and the increase of its production promotes the national development of the agriculture. In this background, the aim of this work has been to use oil from seeds of yellow melon to produce biodiesel and to accomplish a study of the phase equilibrium of the system evolving biodiesel, methanol and glycerin. The biodiesel was obtained by oil transesterification through methylic route with molar ratio 1:9.7 (oil:alcohol) and with a mass of NaOH of 0.5% from the oil mass; the reaction time was 73 minutes at 55 °C. A yield of 84.94% in biodiesel was achieved. The equilibria data present a well-characterized behavior with a great region of two phases. The tie lines indicate that methanol has a best solubility in the phase that is rich in glycerin. Consistency of the experimental data was made based on Othmer-Tobias and Hand correlations which values above 0.99 were found to correlation coefficients, this fact confers a good thermodynamic consistency to the experimental data. NRTL and UNIQUAC models were employed to predict liquid-liquid equilibrium of this system. It was observed a better concordance of the results when NRTL was applied (standard deviation 1.25%) although the UNIQUAC model has presented a quite satisfactory result either (standard deviation 2.70%). The NRTL and UNIQUAC models were also used to evaluate the effect of temperature in the range of 328 K to 358 K, in which a little change in solubility with respect to the data obtained at 298 K was observed, thus being considered negligible the effect of temperature

Produção de forragem verde em sistema hidropônico usando esgoto tratado

In the urban areas of the cities a larger problem of destiny of effluents of the treatment stations is verified due to the junction of the sewages in great volumes. This way the hidroponic cultive becomes important, for your intensive characteristic, as alternative of reuse. This work presents as objective the improvement of the relation hidric-nutritious of the hidroponic cultive of green forage (FVH) using treaty sewage. The production of forage was with corn (Zea mays L.), using double hybrid AG1051, in the experimental field of the Federal University of Rio Grande do Norte (UFRN), in the city of Natal-RN-Brazil. The treated effluent essentially domestic had origin of anaerobic reactor, type decant-digester of two cameras in series followed by anaerobic filters drowned. The hidroponic experimental system was composed of 08 stonemasons, with limited contours for masonry of drained ceramic brick, measuring each one 2,5 meters in length for 1,0 meter of width, with inclination of 4% (m/m) in the longitudinal sense, leveled carefully, in way to not to allow preferential roads in the flow. These dimensions, the useful area of Isow was of 2 square meters. The stonemasons of cultive were waterproof (found and lateral) with plastic canvas of 200 micres of thickness, in the white color. Controlled the entrance and exit of the effluente in the stonemasons, with cycles of 12,68 minutes, it being water of 1,18 minutes. The treatments were constituted of: T1 - 24 hours/day under it waters with flow of 2 L/min; T2 - 12 hours/day under waters with flow of 4 L/min; T3 - 12 hours/day under waters with flow of 2 L/min; and T4 - 16 hours/day under waters with flow of 3 L/min. There were evaluations of the evapotranspirometric demand, of hidroponic system affluent and effluent seeking to characterize and to monitor physical-chemical parameters as: pH, temperature, Electric Conductivity and Fecal Coliforms. This last one was analyzed to the 11 days after isow (DAS) and to the 14 DAS. The others were analyzed daily. I sow it was accomplished in the dates of February 21, 2007, first experiment, and April 10, 2007, second experiment. The density of Isow was of 2 kg of seeds, germinated before 48 hours, for square meter of stonemason. The statistic delineament was it casual entirely with two repetitions, in two experiments. It was applied Tukey test of average to five percent of probability. The cultivation cycle was of 14 DAS with evapotranspirometric demand maximum, reached by T1, of 67,44 mm/day. The analyzed parameters, as mass of green matter - Kg, productivity-Kg/m2 and reason of production of seed FVH/Kg used in Isow, the best result was presented by T1, obtaining value of up to 19,01 Kg/m2 of cultive. Without significant difference, the T4 presented greats values with 16 hours under cycle of water. The Treatments 2 and 3 with 12 hours under cycle of water, they obtained inferior results to the other Treatments. As treatment system, came efficient in the reduction of the salinity. T1 obtained reduction medium maxim of 62,5%, to the 7 DAS, in the amount of salts that enter in the system in they are absorbed in the cultivation. The cultivation FVH acted reducing the microbiologic load. Significant percentile of reduction they were reached, with up to 90,23% of reduction of Units of Colonies (UFC), constituting, like this, the Hidroponic System as good alternative of treatment of effluents of Reactors of high Efficiency