Three-dimensional hydrodynamic numerical modelling of fold nappe formation, basement-cover deformation and slab detachment with applications to the helvetic nappe system (W Switzerland)

Many three-dimensional (3-D) structures in rock, which formed during the deformation of the Earth's crust and lithosphere, are controlled by a difference in mechanical strength between rock units and are often the result of a geometrical instability. Such structures are, for example, folds, pinch-and-swell structures (due to necking) or cuspate-lobate structures (mullions). These struc-tures occur from the centimeter to the kilometer scale and the related deformation processes con-trol the formation of, for example, fold-and-thrust belts and extensional sedimentary basins or the deformation of the basement-cover interface. The 2-D deformation processes causing these structures are relatively well studied, however, several processes during large-strain 3-D defor-mation are still incompletely understood. One of these 3-D processes is the lateral propagation of these structures, such as fold and cusp propagation in a direction orthogonal to the shortening direction or neck propagation in direction orthogonal to the extension direction. Especially, we are interested in fold nappes which are recumbent folds with amplitudes usually exceeding 10 km and they have been presumably formed by ductile shearing. They often exhibit a constant sense of shearing and a non-linear increase of shear strain towards their overturned limb. The fold axes of the Morcles fold nappe in western Switzerland plunges to the ENE whereas the fold axes in the more eastern Doldenhorn nappe plunges to the WSW. These opposite plunge direc-tions characterize the Rawil depression (Wildstrubel depression). The Morcles nappe is mainly the result of layer parallel contraction and shearing. During the compression the massive lime-stones were more competent than the surrounding marls and shales, which led to the buckling characteristics of the Morcles nappe, especially in the north-dipping normal limb. The Dolden-horn nappe exhibits only a minor overturned fold limb. There are still no 3-D numerical studies which investigate the fundamental dynamics of the formation of the large-scale 3-D structure including the Morcles and Doldenhorn nappes and the related Rawil depression. We study the 3-D evolution of geometrical instabilities and fold nappe formation with numerical simulations based on the finite element method (FEM). Simulating geometrical instabilities caused by sharp variations of mechanical strength between rock units requires a numerical algorithm that can accurately resolve material interfaces for large differences in material properties (e.g. between limestone and shale) and for large deformations. Therefore, our FE algorithm combines a nu-merical contour-line technique and a deformable Lagrangian mesh with re-meshing. With this combined method it is possible to accurately follow the initial material contours with the FE mesh and to accurately resolve the geometrical instabilities. The algorithm can simulate 3-D de-formation for a visco-elastic rheology. The viscous rheology is described by a power-law flow law. The code is used to study the 3-D fold nappe formation, the lateral propagation of folding and also the lateral propagation of cusps due to initial half graben geometry. Thereby, the small initial geometrical perturbations for folding and necking are exactly followed by the FE mesh, whereas the initial large perturbation describing a half graben is defined by a contour line inter-secting the finite elements. Further, the 3-D algorithm is applied to 3-D viscous nacking during slab detachment. The results from various simulations are compared with 2-D resulats and a 1-D analytical solution. -- On retrouve beaucoup de structures en 3 dimensions (3-D) dans les roches qui ont pour origines une déformation de la lithosphère terrestre. Ces structures sont par exemple des plis, des boudins (pinch-and-swell) ou des mullions (cuspate-lobate) et sont présentés de l'échelle centimétrique à kilométrique. Mécaniquement, ces structures peuvent être expliquées par une différence de résistance entre les différentes unités de roches et sont généralement le fruit d'une instabilité géométrique. Ces différences mécaniques entre les unités contrôlent non seulement les types de structures rencontrées, mais également le type de déformation (thick skin, thin skin) et le style tectonique (bassin d'avant pays, chaîne d'avant pays). Les processus de la déformation en deux dimensions (2-D) formant ces structures sont relativement bien compris. Cependant, lorsque l'on ajoute la troisiéme dimension, plusieurs processus ne sont pas complètement compris lors de la déformation à large échelle. L'un de ces processus est la propagation latérale des structures, par exemple la propagation de plis ou de mullions dans la direction perpendiculaire à l'axe de com-pression, ou la propagation des zones d'amincissement des boudins perpendiculairement à la direction d'extension. Nous sommes particulièrement intéressés les nappes de plis qui sont des nappes de charriage en forme de plis couché d'une amplitude plurikilométrique et étant formées par cisaillement ductile. La plupart du temps, elles exposent un sens de cisaillement constant et une augmentation non linéaire de la déformation vers la base du flanc inverse. Un exemple connu de nappes de plis est le domaine Helvétique dans les Alpes de l'ouest. Une de ces nap-pes est la Nappe de Morcles dont l'axe de pli plonge E-NE tandis que de l'autre côté de la dépression du Rawil (ou dépression du Wildstrubel), la nappe du Doldenhorn (équivalent de la nappe de Morcles) possède un axe de pli plongeant O-SO. La forme particulière de ces nappes est due à l'alternance de couches calcaires mécaniquement résistantes et de couches mécanique-ment faibles constituées de schistes et de marnes. Ces différences mécaniques dans les couches permettent d'expliquer les plissements internes à la nappe, particulièrement dans le flanc inver-se de la nappe de Morcles. Il faut également noter que le développement du flanc inverse des nappes n'est pas le même des deux côtés de la dépression de Rawil. Ainsi la nappe de Morcles possède un important flanc inverse alors que la nappe du Doldenhorn en est presque dépour-vue. A l'heure actuelle, aucune étude numérique en 3-D n'a été menée afin de comprendre la dynamique fondamentale de la formation des nappes de Morcles et du Doldenhorn ainsi que la formation de la dépression de Rawil. Ce travail propose la première analyse de l'évolution 3-D des instabilités géométriques et de la formation des nappes de plis en utilisant des simulations numériques. Notre modèle est basé sur la méthode des éléments finis (FEM) qui permet de ré-soudre avec précision les interfaces entre deux matériaux ayant des propriétés mécaniques très différentes (par exemple entre les couches calcaires et les couches marneuses). De plus nous utilisons un maillage lagrangien déformable avec une fonction de re-meshing (production d'un nouveau maillage). Grâce à cette méthode combinée il nous est possible de suivre avec précisi-on les interfaces matérielles et de résoudre avec précision les instabilités géométriques lors de la déformation de matériaux visco-élastiques décrit par une rhéologie non linéaire (n>1). Nous uti-lisons cet algorithme afin de comprendre la formation des nappes de plis, la propagation latérale du plissement ainsi que la propagation latérale des structures de type mullions causé par une va-riation latérale de la géométrie (p.ex graben). De plus l'algorithme est utilisé pour comprendre la dynamique 3-D de l'amincissement visqueux et de la rupture de la plaque descendante en zone de subduction. Les résultats obtenus sont comparés à des modèles 2-D et à la solution analytique 1-D. -- Viele drei dimensionale (3-D) Strukturen, die in Gesteinen vorkommen und durch die Verfor-mung der Erdkruste und Litosphäre entstanden sind werden von den unterschiedlichen mechani-schen Eigenschaften der Gesteinseinheiten kontrolliert und sind häufig das Resulat von geome-trischen Istabilitäten. Zu diesen strukturen zählen zum Beispiel Falten, Pich-and-swell Struktu-ren oder sogenannte Cusbate-Lobate Strukturen (auch Mullions). Diese Strukturen kommen in verschiedenen Grössenordungen vor und können Masse von einigen Zentimeter bis zu einigen Kilometer aufweisen. Die mit der Entstehung dieser Strukturen verbundenen Prozesse kontrol-lieren die Entstehung von Gerbirgen und Sediment-Becken sowie die Verformung des Kontaktes zwischen Grundgebirge und Stedimenten. Die zwei dimensionalen (2-D) Verformungs-Prozesse die zu den genannten Strukturen führen sind bereits sehr gut untersucht. Einige Prozesse wäh-rend starker 3-D Verformung sind hingegen noch unvollständig verstanden. Einer dieser 3-D Prozesse ist die seitliche Fortpflanzung der beschriebenen Strukturen, so wie die seitliche Fort-pflanzung von Falten und Cusbate-Lobate Strukturen senkrecht zur Verkürzungsrichtung und die seitliche Fortpflanzung von Pinch-and-Swell Strukturen othogonal zur Streckungsrichtung. Insbesondere interessieren wir uns für Faltendecken, liegende Falten mit Amplituden von mehr als 10 km. Faltendecken entstehen vermutlich durch duktile Verscherung. Sie zeigen oft einen konstanten Scherungssinn und eine nicht-lineare zunahme der Scherverformung am überkipp-ten Schenkel. Die Faltenachsen der Morcles Decke in der Westschweiz fallen Richtung ONO während die Faltenachsen der östicher gelegenen Doldenhorn Decke gegen WSW einfallen. Diese entgegengesetzten Einfallrichtungen charakterisieren die Rawil Depression (Wildstrubel Depression). Die Morcles Decke ist überwiegend das Resultat von Verkürzung und Scherung parallel zu den Sedimentlagen. Während der Verkürzung verhielt sich der massive Kalkstein kompetenter als der Umliegende Mergel und Schiefer, was zur Verfaltetung Morcles Decke führ-te, vorallem in gegen Norden eifallenden überkippten Schenkel. Die Doldenhorn Decke weist dagegen einen viel kleineren überkippten Schenkel und eine stärkere Lokalisierung der Verfor-mung auf. Bis heute gibt es keine 3-D numerischen Studien, die die fundamentale Dynamik der Entstehung von grossen stark verformten 3-D Strukturen wie den Morcles und Doldenhorn Decken sowie der damit verbudenen Rawil Depression untersuchen. Wir betrachten die 3-D Ent-wicklung von geometrischen Instabilitäten sowie die Entstehung fon Faltendecken mit Hilfe von numerischen Simulationen basiert auf der Finite Elemente Methode (FEM). Die Simulation von geometrischen Instabilitäten, die aufgrund von Änderungen der Materialeigenschaften zwischen verschiedenen Gesteinseinheiten entstehen, erfortert einen numerischen Algorithmus, der in der Lage ist die Materialgrenzen mit starkem Kontrast der Materialeigenschaften (zum Beispiel zwi-schen Kalksteineinheiten und Mergel) für starke Verfomung genau aufzulösen. Um dem gerecht zu werden kombiniert unser FE Algorithmus eine numerische Contour-Linien-Technik und ein deformierbares Lagranges Netz mit Re-meshing. Mit dieser kombinierten Methode ist es mög-lich den anfänglichen Materialgrenzen mit dem FE Netz genau zu folgen und die geometrischen Instabilitäten genügend aufzulösen. Der Algorithmus ist in der Lage visko-elastische 3-D Ver-formung zu rechnen, wobei die viskose Rheologie mit Hilfe eines power-law Fliessgesetzes beschrieben wird. Mit dem numerischen Algorithmus untersuchen wir die Entstehung von 3-D Faltendecken, die seitliche Fortpflanzung der Faltung sowie der Cusbate-Lobate Strukturen die sich durch die Verkürzung eines mit Sediment gefüllten Halbgraben bilden. Dabei werden die anfänglichen geometrischen Instabilitäten der Faltung exakt mit dem FE Netz aufgelöst wäh-rend die Materialgranzen des Halbgrabens die Finiten Elemente durchschneidet. Desweiteren wird der 3-D Algorithmus auf die Einschnürung während der 3-D viskosen Plattenablösung und Subduktion angewandt. Die 3-D Resultate werden mit 2-D Ergebnissen und einer 1-D analyti-schen Lösung verglichen.

Contribution of estrogen and GluN2B subunit to the HtraKO mouse phenotype

Htr1a is one of the most widespread serotonin receptor across the brain, strongly expressed in CAI region of hippocampus. Our laboratory studies the phenotypic alteration in 5HTla- deficient mice (Htr1aK0), characterized an abnormal anxious-like behavior. Our aim is to evaluate the regulation of this cognitive process by understanding the circuitry involved. This phenotype sets up early during development and has durable effect in adulthood. Our laboratory showed that adult Htr1aK0 male mice displaying exuberant dendritic growth of oblique dendrites in a specific layer of a CAI pyramidal neurons, the stratum radiatum. Application of drugs in organotypic cultures and by in vivo injections revealed that GluN2B, a subunit of NMDA receptor highly expressed during development, is responsible for this dendritic exuberance. Immunohistochemistry highlighted in particular a synaptic enrichment of GluN2B in stratum radiatum of Htr1aK0 CAI pyramidal neurons at puberty. Finally, original analysis of Htr1aK0 mouse behavior showed a different response to anxiety between male and female. Htr1a activation down-regulates the CaMKII activity in the CAI pyramidal neurons. CaMKII directly favors the membrane conductance and stability of GluN2B at the synapse. In the context of the Htr1aK0 mouse, GluN2B is the final common pathway of our phenotype. This subunit is well known to regulate the threshold of LTD/LTP and the dendritogenesis during development. In my thesis, I establish a link between the gender differences in the morphology and the physiology in the Htr1aK0 mice during development to understand how these characteristics shape the circuit with prominent cognitive impacts in adulthood. My study highlighted that during development, Htr1aK0 male mice show a constant increase of the dendritic growth of oblique dendrites from early ages until adulthood associated with an increased physiological impact of altered GluN2A/GluN2B ratio. Whereas during puberty, synaptic contribution of GluN2B to NMDA response is higher in Htr1aK0 compared to WT male mice, this ratio comes back to normal values towards adulthood. However, this recovery of the ratio of GluN2A/GluN2B located at the synaptic level is concomitant with the lateral diffusion of excess GluN2B subunits, leading to extrasynaptic enrichment. The main impact was a lowering of the LTP threshold characterized by strong increased potentiation of synaptic strength after 5 Hz low frequency stimulation. Moreover, the extrasynaptic GluN2B overexpression leads to a shift of the maturation phase switch explaining the exuberant morphology. However, Htr1aK0 females characterized during the 3 first weeks of development by an increase of the dendritic growth of oblique dendrites showed starting at puberty that the dendrite arborization returns progressively to WT values. The physiological impact of GluN2B was investigated and directly linked to this morphology, since Htr1aK0 female mice does not show alteration of the synaptic strength during development. These observations show a compensation occurring in Htr1aK0 female, responsible for a rescue of the phenotype morphologically, physiologically and to be tested behaviorally. We highlighted then the biological processes underlying this compensation. During development, sexual hormones such as testosterone and estrogen are responsible to induce sexual differentiation of specific brain regions. I demonstrated that estrogen, but not testosterone, was able to reduce both in vitro and in vivo the dendritic arborization early during development, through activation of GPER-1, a G-coupled protein estrogen receptor, which phenocopy the activation of Htr1a by reducing GluN2B conductance and stability. I then identified a pathway, parallel to Htr1a, able to regulate GluN2B and responsible for the morphological and physiological phenotype in Htr1aK0 female mice. The specific rise of estrogen occurring at puberty in female is responsible for the compensation observed and induces a late rescue of the Htr1aK0 phenotype by activation GPER-1. -- Htr1a est un des récepteurs à la sérotonine les plus répandus dans le cerveau, fortement exprimé dans la région CAI de l'hippocampe. Notre laboratoire étudie les altérations phénotypiques de souris déficientes pour ce récepteur (Htr1aK0), caractérisées par un comportement avec des traits anxieux. Notre objectif est d'évaluer la régulation de ces processus cognitifs en comprenant les connexions nerveuses impliquées. Ce phénotype se met en place tôt au cours du développement et présente un effet durable à l'âge adulte. Notre laboratoire a montré que les souris Htr1aK0 mâles adultes se caractérisent par une croissance exubérante des dendrites obliques dans une couche spécifique des neurones pyramidaux du CAI, le stratum radiatum. L'application de drogues sur cultures organotypiques et par injections in vivo ont révélé que GluN2B, une sous-unité du récepteur NMDA fortement exprimée au cours du développement, est responsable de cette exubérance dendritique. Des expériences d'immunohistochimie ont notamment mis en évidence un enrichissement synaptique de GluN2B durant la puberté dans le stratum radiatum des neurones de la région CAI des souris Htr1aK0. Finalement, l'analyse originale du comportement des souris Htr1aK0 a montré une différence de réponse à l'anxiété entre mâles et femelles. L'activation de Htr1a diminue l'activité de la CaMKII dans les neurones pyramidaux du CAI. La CaMKII favorise directement la conductance et la stabilité de la sous-unité GluN2B à la synapse. Dans le contexte de la souris Htr1aK0, GluN2B est le « médiateur » de notre phénotype. Cette sous-unité est particulièrement connue pour réguler le seuil de LTD-LTP ainsi que la dendritogénèse durant le développement. Dans ma thèse, j'ai établi le lien entre les différences dépendant du genre dans la morphologie et physiologie des souris Htr1aK0 au cours du développement pour comprendre comment ces caractéristiques modulent le circuit accompagnés d'impacts cognitifs visibles à l'âge adulte. Mon étude a mis en évidence que durant le développement, les souris mâles Htr1aK0 montrent une constante augmentation de la croissance des dendrites obliques entre les premières semaines et l'âge adulte associée à une augmentation de l'impact physiologique du ratio GluN2A/GluN2B altéré. Alors que durant la puberté, la contribution synaptique de GluN2B à la réponse NMDA est plus haute chez la souris mâle Htr1aK0 que le WT, ce ratio revient à des valeurs normales à l'âge adulte. Cependant, cette récupération de l'expression du récepteur au niveau synaptique est concomitante avec la diffusion des sous-unités GluN2B excédantes, amenant alors à un enrichissement extrasynaptique. Le principal impact est une diminution du seuil de la LTP caractérisée par une forte potentiation de la plasticité après une stimulation basse fréquence à 5 Hz. De plus, la surexpression des GluN2B extrasynaptiques conduit à un décalage de la bascule à la phase de maturation, expliquant la morphologie dendritique exubérante. Cependant, les femelles Htr1aK0 initialement caractérisées pendant les 3 premières semaines du développement par une augmentation de la croissance des dendrites obliques montrent à partir de la puberté que cette arborisation dendritique retourne à des valeurs WT. L'impact physiologique de GLuN2B a été investigué et mis en lien avec cette morphologie, étant donné que les femelles Htr1aK0 ne montrent pas d'altération de la plasticité durant le développement. Ces observations montrent une compensation se produisant chez la femelle Htr1aK0, responsable d'une récupération du phénotype morphologique, physiologique et peut-être comportemental. Nous avons souligné les processus biologiques sous-jacent à cette compensation. Au cours du développement, les hormones sexuelles telles que la testostérone et l'estrogène sont responsables de la différentiation sexuelle de régions du cerveau spécifiques. J'ai démontré que l'estrogène, mais pas la testostérone, était capable de réduire in vitro et in vivo l'arborisation dendritique tôt dans le développement au travers de l'activation du récepteur GPER-1, un récepteur aux estrogènes couplés à un protéine G, qui phénocopie l'activation de Htr1a en réduisant la conductance et la stabilité de GluN2B à la membrane. J'ai identifié une voie de signalisation parallèle à celle de Htr1a, capable de réguler GluN2B et responsable du phénotype morphologique et physiologique de la souris femelle Htr1aK0. La montée spécifique d'estrogène se déroulant à la puberté chez la femelle est responsable de cette compensation et implique une récupération tardive du phénotype Htr1aK0 par l'activation de GPER-1.

Soluble tissue sugar content and leaf blast severity in response to the application of calcinated serpentinite as a silicon source in irrigated rice

A field experiment conducted with the irrigated rice cultivar BRS Formoso, to assess the efficiency of calcinated serpentinite as a silicon source on grain yield was utilized to study its effect on leaf blast severity and tissue sugar levels. The treatments consisted of five rates of calcinated serpentinite (0, 2, 4, 6, 8 Mg.ha-1) incorporated into the soil prior to planting. The leaf blast severity was reduced at the rate of 2.96% per ton of calcinated serpentinite. The total tissue sugar content decreased significantly as the rates of serpentinite applied increased (R² = 0.83). The relationship between the tissue sugar content and leaf blast severity was linear and positive (R² = 0.81). The decrease in leaf blast severity with increased rates of calcinated serpentinite was also linear (R²= 0.96) and can be ascribed to reduced sugar level.

Establishment of a health and safety management system according to the OHSAS 18001 standard

The thesis develops guidelines for the implementation of the health and safety management system according to the OHSAS 18001 standard, as well as the feasible threat analysis, project proposal schedule, future system quality improvements and organizational change evaluation. The theoretical part clarifies determination of occupational health and safety, its management system, the OHSAS 18001 standard and integrated management system compounded of triple ISO 14001, ISO 9001 and OHSAS 18001 standards. The literature includes such important aspects as human factor, organizational policies, possible benefits, threats, organizational safety culture, Deming’s quality improvement cycle, system implementation, maintenance and cost matters. The empirical part demonstrates real-life situation by using Andritz Pulp & Paper Oy as a case study. Prior the thesis proposal, Andritz Group is analysed including separate business areas, acquisition and integration strategies, current status of the health and safety management and parallel experiences of the largest business area Andritz Hydro. The proposal is aimed at improving the current health and safety system for the permanent and sub-contracted employees at Andritz Pulp & Paper both in Finland and in various projects globally.

Characterisation of waste for combustion : with special reference to the role of zinc

Waste combustion has gone from being a volume reducing discarding-method to an energy recovery process for unwanted material that cannot be reused or recycled. Different fractions of waste are used as fuel today, such as; municipal solid waste, refuse derived fuel, and solid recovered fuel. Furthermore, industrial waste, normally a mixture between commercial waste and building and demolition waste, is common, either as separate fuels or mixed with, for example, municipal solid waste. Compared to fossil or biomass fuels, waste mixtures are extremely heterogeneous, making it a complicated fuel. Differences in calorific values, ash content, moisture content, and changing levels of elements, such as Cl and alkali metals, are common in waste fuel. Moreover, waste contains much higher levels of troublesome trace elements, such as Zn, which is thought to accelerate a corrosion process. Varying fuel quality can be strenuous on the boiler system and may cause fouling and corrosion of heat exchanger surfaces. This thesis examines waste fuels and waste combustion from different angles, with the objective of giving a better understanding of waste as an important fuel in today’s fuel economy. Several chemical characterisation campaigns of waste fuels over longer time periods (10-12 months) was used to determine the fossil content of Swedish waste fuels, to investigate possible seasonal variations, and to study the presence of Zn in waste. Data from the characterisation campaigns were used for thermodynamic equilibrium calculations to follow trends and determine the effect of changing concentrations of various elements. The thesis also includes a study of the thermal behaviour of Zn and a full—scale study of how the bed temperature affects the volatilisation of alkali metals and Zn from the fuel. As mixed waste fuel contains considerable amounts of fresh biomass, such as wood, food waste, paper etc. it would be wrong to classify it as a fossil fuel. When Sweden introduced waste combustion as a part of the European Union emission trading system in the beginning of 2013 there was a need for combustion plants to find a usable and reliable method to determine the fossil content. Four different methods were studied in full-scale of seven combustion plants; 14Canalysis of solid waste, 14C-analysis of flue gas, sorting analysis followed by calculations, and a patented balance method that is using a software program to calculate the fossil content based on parameters from the plant. The study showed that approximately one third of the coal in Swedish waste mixtures has fossil origins and presented the plants with information about the four different methods and their advantages and disadvantages. Characterisation campaigns also showed that industrial waste contain higher levels of trace elements, such as Zn. The content of Zn in Swedish waste fuels was determined to be approximately 800 mg kg-1 on average, based on 42 samples of solid waste from seven different plants with varying mixtures between municipal solid waste and industrial waste. A review study of the occurrence of Zn in fuels confirmed that the highest amounts of Zn are present in waste fuels rather than in fossil or biomass fuels. In tires, Zn is used as a vulcanizing agent and can reach concentration values of 9600-16800 mg kg-1. Waste Electrical and Electronic Equipment is the second Zn-richest fuel and even though on average Zn content is around 4000 mg kg-1, the values of over 19000 mg kg-1 were also reported. The increased amounts of Zn, 3000-4000 mg kg-1, are also found in municipal solid waste, sludge with over 2000 mg kg-1 on average (some exceptions up to 49000 mg kg-1), and other waste derived fuels (over 1000 mg kg-1). Zn is also found in fossil fuels. In coal, the average level of Zn is 100 mg kg-1, the higher amount of Zn was only reported for oil shale with values between 20-2680 mg kg-1. The content of Zn in biomass is basically determined by its natural occurrence and it is typically 10-100 mg kg-1. The thermal behaviour of Zn is of importance to understand the possible reactions taking place in the boiler. By using thermal analysis three common Zn-compounds were studied (ZnCl2, ZnSO4, and ZnO) and compared to phase diagrams produced with thermodynamic equilibrium calculations. The results of the study suggest that ZnCl2(s/l) cannot exist readily in the boiler due to its volatility at high temperatures and its conversion to ZnO in oxidising conditions. Also, ZnSO4 decomposes around 680°C, while ZnO is relatively stable in the temperature range prevailing in the boiler. Furthermore, by exposing ZnO to HCl in a hot environment (240-330°C) it was shown that chlorination of ZnO with HCl gas is possible. Waste fuel containing high levels of elements known to be corrosive, for example, Na and K in combination with Cl, and also significant amounts of trace elements, such as Zn, are demanding on the whole boiler system. A full-scale study of how the volatilisation of Na, K, and Zn is affected by the bed temperature in a fluidised bed boiler was performed parallel with a lab-scale study with the same conditions. The study showed that the fouling rate on deposit probes were decreased by 20 % when the bed temperature was decreased from 870°C to below 720°C. In addition, the lab-scale experiments clearly indicated that the amount of alkali metals and Zn volatilised depends on the reactor temperature.

Rising to the impossible challenge: the storage of all research data, forever?

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Environment is crucial to the cooking time of beans

The objectives of this study were to understand how genotype, storage time, and storage conditions affect cooking time of beans and to indicate storage techniques that do not affect the cooking time. The grains were subjected to five different storage periods and six different storage conditions. The cooking time was estimated using the Mattson Cooker. The data were subjected to analysis of variance and a subsequent adjustment of simple linear regression for deployment of the interactions between the factors. Contrasts were used to determine the best levels of the factor storage condition. Genotype did not impact cooking time when the storage time and storage conditions were considered. Time and storage conditions affect the cooking time of beans in a dependent manner, but time of storage had the biggest influence. The best conditions for long-term storage of beans ensuring a smaller increase in cooking time is plastic storage at low temperatures. Thus, plastic freezer storage is a practical alternative for consumers.

The surficial geology, sedimentology and geochemistry of the late glacial sediments and Paleozoic bedrock in the Campbellford area, Ontario, with special reference to the Dummer Complex /

The Dummer Complex extends 180 km along the Precambrian - Paleozoic contact from Tamworth to Lake Simcoe. It is composed of coarse, angular Paleozoic clasts in discontinuous, pitted, hummocky deposits. Deposits are usually separated by bare or boulder strewn bedrock, but have been found in the southern drumlinized till sheet. Dummer Complex deposits show rough alignment with ice-flow. Eskers cross-cut many of the deposits. Dummer sediment subfacies are defined on the basis of dominant coarse grain size and lithology, which relate directly to the underlying Paleozoic formation. Three subglacial tills are identified based on the degree of comminution and distance of transport; the immature facies of the Dummer Complex; the mature facies of the drumlinized till sheet and; the submature facies which is transitional. Carbonate geochemistry was used for till-bedrock correlation in various grain sizes. Of the 3 Paleozoic formations underlying the Dummer Complex, the Gull River Fm. is geochemically distinctive from the Bobcaygeon and Verulam Formations using Ca, Mg, Sr, Cu, Mn, Fe and Na. The Bobcaygeon Fm. and Verulam Fm. can be differentiated using Ca and the Sr/Ca ratio. The immature facies from 1.0 phi and finer is dominated by the non-carbonate, long distance transported component which decreases slightly downice. The submature till facies contains more long distance material than the immature facies. Sr and Mn can be used to correlate the Gull River immature till facies to the underlying bedrock the other subfacies could not be distinguished from each other or their respective source formation. This method proved to be ineffective for sediments with greater than 35% non-carbonate component, due to leaching of elements by the dissolving acid.The Dummer Complex is produced subglacially , as the compressional ice encounters the permeable Paleozoic carbonates. The increased shear strength of the ice and pore pressures in the carbonates results in the basal ice zones becoming debris ladden. Cleaner ice overrides the basal debris . laden dead ice which then acts as the glacier bed. During retreat, the Simcoe lobe stagnates as flow is cut-off by the Algonquin Highlands.

Texture, composition and provinance of innershelf sediments between Narakkal and Purakkad, Kerala with special reference to the formation of Mud Banks

The continental shelf of southwest coast of India (Kerala) is broader and . flatter compared to that of the east coast. The unique characteristic feature of the study area (innershelf between Narakkal and Purakkad) is the intermittent appearance of 'mud banks' at certain locations during southwest monsoon. The strong seasonality manifests significant changes in the wind, waves, currents, rainfall, drainage etc., along this area. Peculiar geomorphological variation with high, mid and lowlands in the narrow strip of the hinterland, the geological formations mainly consisting of rocks of metamorphic origin and the humid tropical weathering conditions play significant role in regulating the shelf sedimentation. A complementary pattern of distri bution is observed for clay that shows an abundance in the nearshore. Silt, to a major extent, depicts semblance with clay distribution . Summation of the total asymmetry of grain size distribution are inferred from the variation of skewness and kurtosis.Factor I implies a low energy regime where the transportation and deposition phases are controlled mostly by pelagic suspension process as the factor loadings are dominant on finer phi sizes. The second Factor is inferred to be the result of a high energy regime which gives higher loadings on coarser size fractions. The third Factor which might be a transition phase (medium energy regime) representing the resultant flux of coastal circulation of the re-suspension/deposition and an onshoreoffshore advection by reworking and co-deposition of relict and modern sediments. The spatial variations of the energy regime based on the three end-member factor model exhibits high energy zone in the seaward portion transcending to a low energy one towards the coast.From the combined analysis of granulometry and SEM studies, it is concluded that the sandy patches beyond 20 m depth are of relict nature. They are the resultant responses of beach activity during the lower stand of sea level in the Holocene. Re-crystallisation features on the quartz grains indicate that they were exposed to subaerial weathering process subsequent to thei r deposition

Study on acceleratore in rubber vulcanization with special reference to the binary systems containing substituted dithiobiurets

The thesis entitled Study on Accelerators in Rubber Vulcanization with Special Reference to the Binary Systems Containing Substituted Dithiobiurets. It includes a detailed study on the binary accelerator systems containing substituted dithiobiurets in natural rubber and NR latex and dithiobiurets in SBR and NR-SBR blends vulcanization systems. It deals with the experimental procedure adopted for the preparation of DTB-II and DTB-III; the procedure for compounding and vulcanization and determination of physical properties like modulus, tensile strength, elongation at break, hardness, compression set, heat build up etc. The results indicate that there is efficient acceleration activity of the dithiobiurets in the vulcanization of natural rubber latex containing TMT. The study of dithiobiurets in natural rubber and NR latex reveal that they are having definite accelerating effect in SBR vulcanization systems.

Hegemony, Private Actors, and International Institutions: Transnational Corporations as the agents of transformation of the trade regime from GATT to the WTO

Diese Dissertation hat das Ziel, zum einen die Transformation des Handelssystems von der GATT zur Welthandelsorganisation (WTO) im Kontext einer veränderten Weltordnung und zum anderen die Rollen von transnationalen Unternehmen im Rahmen dieser Transformation zu untersuchen und zu verstehen. Die Arbeit wird theoretisch vom Neogramscianismus angeleitet, da die etablierten Ansätzen in den Internationalen Beziehungen und der International Politischen Ökonomie nur unzureichend die intersubjektive Natur von Regimen und nicht-staatlichen Akteuren darstellen. Für Anhänger des Neogramscianismus sind internationale Regime intersubjektive Einheiten, deren Zusammenspiel von Ideen und Machtkonfigurationen historische Strukturen prägen. Die Hegemonie ist ein Konzept, das soziale Einflüsse als Agenten historischen Wandels in international Regimen und der Weltordnung zusammenbindet. Mit dem Konzept der Hegemonie wird eine Machtsituation beschrieben, in der politische Macht in legitime Autorität übersetzt wird, indem die Zustimmung subalterner Akteure eingeholt wird. Hegemonie beinhaltet die konsensuellen Aspekte von Machtausübung in einer jeweiligen Weltordnung. Diese Dissertation argumentiert vor allem, dass die Transformation des Handelssystems als hegemonisch bezeichnet werden kann, da sie parallel mit der Transformation der Weltordnung von einer von den USA dominierten Nachkriegszeit zu einer neoliberalen Hegemonie stattfand. Mit der Transformation zur Welthandlungsorganisation wird der legale Rahmen des Handelssystems neu strukturiert und ihre normative Grundlagen neu definiert, wodurch der ethische Rahmen des Neoliberalismus reflektiert wird. Diese Änderungen werden in der neuartigen Anerkennung der legitimen Autorität des Marktes gegenüber Nationalstaaten und der Anerkennung von der Notwendigkeit von bindenden Disziplinen, die Regierungen übergeordnet sind, reflektiert. Diese Dissertation analysiert zwei Fälle, um die Rolle von transnationalen Unternehmen innerhalb diese Transformationsprozesses zu erklären. Dabei wird der Fokus vor allem auf die Aktivitäten und Fähigkeiten der Unternehmen gerichtet, die Ausrichtung des Handelsregimes zu bestimmen. Die erste Studie untersucht die Eingliederung von Dienstleistungen in das GATT Regime vor und während der Uruguay-Runde (1986 – 1994) und argumentiert, dass diese Eingliederung zu einer Neudefinierung von Liberalisierung und Normen der Nichtdiskriminierung führte. Die zweite Studie analysiert den gescheiterten Versuch, ausländische Direktinvestitionen noch bevor und während der 2001 begonnenen Doha Runde in die Welthandelsorganisation zu integrieren. Letztendlich wird in dieser Dissertation argumentiert, dass transnationale Unternehmen, die in den Vereinigten Staaten ansässig sind, hegemonische Agenten der Regimetransformation waren und eine wichtige Rolle dabei gespielt haben, Dienstleistungen in das GATT einzubinden. Und zwar gelang ihnen dies durch eine in den späten 1970er Jahren begonnenen Kampagne. Auf der einen Seite war die Kampagne darin erfolgreich, etablierte Denkstrukturen zu Handelsthemen systematisch im Sinne des Neoliberalismus zu verändern – und zwar sowohl hinsichtlich der normativen Inhalte als auch der intersubjektiven Bedeutungen des Regimes. Auf der anderen Seite deutet der Fall des Investitionsabkommens die Grenzen der hegemonischen Ideen, Institutionen, und Strömungen seit den frühen 90er Jahren an. Transnationale Unternehmen, die in Europa ansässig waren, sind mit ihren Bemühungen gescheitert, das Regime weiter zu transformieren und das Thema Investitionen in die legalen und normativen Rahmenbedingungen der WTO zu integrieren. Die Prioritäten und Strategien der transnationalen Unternehmen, die Agenda der WTO zu beeinflussen, waren beschränkt und wurden im Kontext einer angefochtenen neoliberalen Hegemonie geformt, die wiederum von dem Widerstand und anti-hegemonischen Kampagnen der Zivilgesellschaft beeinflusst wurden. Die Analyse in dieser Dissertation wurde durch eine qualitative Diskursanalyse von Sekundär- und Primärquellen durchgeführt: Regierungsvorschläge, Verhandlungstexte, Konferenzzusammenfassungen und Statements von Unternehmen.

Contribution from neuropsychology to the study of semantic memory

Semantic memory has been studied from various fields. The first models emerged from cognitive psychology from the hand of the division proposed by Tulving between semantic and episodic memory. Over the past thirty years there have been parallel developments in the fields of psycholinguistics, cognitive psychology and cognitive neuropsychology. The present work is to review the contributions that have emerged within the neuropsychology to the study of semantic memory and to present an updated overview of the points of consensus. First, it is defined the term "semantics" conceptually within the field of neuropsychology. Then, there is a dichotomy that passes through both psychological and neuropsychological models on semantic memory: the existence of modals versus amodal representations. Third, there are  developed the main theoretical models in neuropsychology that emerged in an attempt to explain categoryspecific semantic deficits. Finally, more robust contributions and points that still generate some discussion are reviewed.

A new efficient approach to the direct restricted active space self-consistent field method

An implicitly parallel method for integral-block driven restricted active space self-consistent field (RASSCF) algorithms is presented. The approach is based on a model space representation of the RAS active orbitals with an efficient expansion of the model subspaces. The applicability of the method is demonstrated with a RASSCF investigation of the first two excited states of indole

Reductions in insecticide use from adoption of Bt cotton in South Africa: impacts on economic performance and toxic load to the environment

The study reported presents the findings relating to commercial growing of genetically-modified Bt cotton in South Africa by a large sample of smallholder farmers over three seasons (1998/99, 1999/2000, 2000/01) following adoption. The analysis presents constructs and compares groupwise differences for key variables in Bt v. non-Bt technology and uses regressions to further analyse the production and profit impacts of Bt adoption. Analysis of the distribution of benefits between farmers due to the technology is also presented. In parallel with these socio-economic measures, the toxic loads being presented to the environment following the introduction of Bt cotton are monitored in terms of insecticide active ingredient (ai) and the Biocide Index. The latter adjusts ai to allow for differing persistence and toxicity of insecticides. Results show substantial and significant financial benefits to smallholder cotton growers of adopting Bt cotton over three seasons in terms of increased yields, lower insecticide spray costs and higher gross margins. This includes one particularly wet, poor growing season. In addition, those with the smaller holdings appeared to benefit proportionately more from the technology (in terms of higher gross margins) than those with larger holdings. Analysis using the Gini-coefficient suggests that the Bt technology has helped to reduce inequality amongst smallholder cotton growers in Makhathini compared to what may have been the position if they had grown conventional cotton. However, while Bt growers applied lower amounts of insecticide and had lower Biocide Indices (per ha) than growers of non-Bt cotton, some of this advantage was due to a reduction in non-bollworm insecticide. Indeed, the Biocide Index for all farmers in the population actually increased with the introduction of Bt cotton. The results indicate the complexity of such studies on the socio-economic and environmental impacts of GM varieties in the developing world.

An ichnofabric approach to the depositional interpretation of the intensely burrowed Bateig Limestone, Miocene, SE Spain

The foraminiferal-rich pelagic Bateig Limestone forms several varieties of the important building stones quarried at Bateig Hill in southeastern Spain. Three principal ichnofabrics (Bichordites, mottled-Palaeophycus and mottled-Ophiomorpha) are recognized, which are present in at least two (possibly up to four) repeated successions (cycles). Each succession begins with an erosional event. The Bichordites ichnofabric represents a new type of facies, formed as thin turbidity/grain flow, stratiform units derived from sediment slips off a fault into deep water. Each slipped unit became almost completely bioturbated by infaunal echinoids, colonizing by lateral migration. Because of the thinness of the units, successive colonizations tended to truncate the underlying burrows giving rise to a pseudo-stratification. As the Bichordites ichnofabric accumulated on the fault apron, thus reducing the effective height of the fault scarp, the substrate gradually came under the influence of currents traversing the shelf. This led to a change in hydraulic regime, and to the mottled-Palaeophycus and mottled-Ophiomorpha ichnofabrics in sediment deposited under bed load transport, and associated with laminar and cross-stratified beds and local muddy intervals. Reactivation of the fault triggered erosion and channeling and a return to grain flow sedimentation, and to the Bichordites ichnofabric of the succeeding cycle. The highest unit of the Bateig Limestone is formed entirely of cross-stratified calcarenites with occasional Ophiomorpha (Ophiomorpha-primary lamination ichnofabric) and is similar to many shallow marine facies but they still bear a significant content of pelagic foraminifera. The sedimentary setting bears resemblance with that described for the Pleistocene Monte Torre Paleostrait and the modem Strait of Messina (Italy), where the narrow morphology of the depositional area enhanced tidal currents and allowed for high-energy sandy deposition in relatively deep areas. More data on the Miocene paleogeography of the Bateig area should provide further testing for this hypothesis. The ichnofacies and stacking of the Bateig Limestone differ from the classic Seilacherian model in that they reflect changes in hydraulic process and are associated with faulting and subsidence and changes in sediment supply. Recognition of the unusual ichnofabrics and their relationships provides a clear indication of the overall dynamic setting. (c) 2006 Elsevier B.V. All rights reserved.