Cultivo de híbridos de pimentão amarelo em fibra da casca de coco

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência de pimentas a nematóides de galha e compatibilidade enxerto/porta-enxerto entre híbridos de pimentão e pimentas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identificação de híbridos de citros resistentes à mancha-marrom-de-alternária por meio de fAFLP e testes de patogenicidade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características agronômicas e composição química de oito híbridos de sorgo [Sorghum bicolor (L.) Moench]

O experimento foi conduzido com o objetivo de avaliar as características agronômicas, composição química das frações e da planta inteira de oito híbridos de sorgo, semeados em março de 2000, no sentido de contribuir para os programas de seleção de germoplamas resistentes aos efeitos das estiagens prolongadas e, ao mesmo tempo, apropriados ao processo de ensilagem. Utilizou-se o delineamento em blocos ao acaso com oito tratamentos e três repetições, para avaliar os híbridos AG-2005, BR-700, MASSA-03, 498111, 65E3, 698005, 698007 e 699005. Não houve diferenças significativas entre produção de matéria seca (PMS) e proporção de folhas dos híbridos avaliados. A maior proporção de colmo (41,3%) foi observada no 498111 e a menor no MASSA-03 (28,9%). O híbrido 65E3 apresentou a maior proporção de panícula (43,2%) e o 498111 a menor (28,9%). Quanto à composição química da planta inteira, não foram observadas diferenças significativas entre os híbridos quanto aos teores de matéria seca, matéria mineral, hemicelulose, nitrogênio insolúvel em detergente neutro, nitrogênio insolúvel em detergente ácido e nutrientes digestíveis totais (NDT). Os teores de proteína bruta variaram de 6,5 a 8,8%, fibra em detergente neutro de 57,0 a 70,3%, fibra em detergente ácido de 29,8 a 36,2%, celulose de 25,3 a 31,2% e lignina de 3,6 a 5,5%, sendo estatisticamente diferentes entre os híbridos. O 699005 apresentou o maior teor de carboidratos solúveis (14,5%), diferindo estatisticamente apenas do híbrido 698007 (9,6%). Os híbridos também mostraram diferenças na composição química das frações folhas, colmo e panícula. de forma geral, todos os híbridos apresentaram teores de matéria seca e carboidratos solúveis adequados ao processo de ensilagem. As produções médias de matéria seca dos híbridos (6,2 t/ha), foram altas considerando-se a baixa precipitação ocorrida durante o período experimental. A análise de Cluster sugeriu o agrupamento dos híbridos de maior PMS e menores porcentagens de panícula e NDT e híbridos de menor PMS, porém com maiores porcentagens de panícula e NDT.

Degradabilidade ruminal in situ da matéria seca e da fibra em detergente neutro em silagens de híbridos de sorgo colhidos em diferentes épocas

O objetivo deste trabalho foi o de avaliar o efeito das silagens de três híbridos de sorgo: granífero (Conti-Silo, de porte baixo), duplo propósito (Conti-Silo-03, de porte médio) e forrageiro (547-F, de porte alto) e de três épocas distintas (aos 105, 112 e 119 dias após a semeadura) sobre a degradabilidade in situ da matéria seca (MS) e da fibra em detergente neutro (FDN). Foram utilizados três bovinos adultos mestiços fistulados no rúmem, distribuídos em um delineamento experimental em parcelas subdivididas, com três tempos de incubação (6, 24, 96 horas). Houve diferença (P<0,05) nas frações de desaparecimento da MS e de FDN após 6, 24 e 96 horas de incubação ruminal entre as diferentes silagens. Quanto à época de colheita, a diferença na degradação de MS foi observada após 96 horas de incubação, destacando-se a variedade de duplo propósito, superior nos três diferentes cortes. Com a maturação, observou-se tendência de aumento na fração degradável da MS, porém esse efeito foi menos evidente nas silagens de sorgo forrageiro. Para a FDN não houve diferença (P<0,05) entre silagens em nenhum dos tempos de incubação.

Composição química e perfil de ácidos graxos da carne de bovinos de diferentes condições sexuais recebendo silagem de milho e concentrado ou cana-de-açúcar e concentrado contendo grãos de girassol

O objetivo neste trabalho foi avaliar as características químicas e a composição em ácidos graxos do contrafilé (músculo Longissimus) de tourinhos, novilhos e novilhas da raça Canchim. Os animais foram terminados em confinamento com duas dietas experimentais, uma com silagem de milho e concentrado e outra com cana-de-açúcar e concentrado contendo grãos de girassol. Os teores de umidade, proteína e minerais no músculo não diferiram entre as dietas e as condições sexuais dos animais. A carne de novilhos terminados com a dieta com grãos de girassol apresentou maior teor de lipídios (3,31%) em comparação à dos animais de outras categorias. Os animais que receberam a dieta com grãos de girassol apresentaram maiores concentrações de ácido linoléico conjugado (18:2 cis9, trans-11) (0,73%) e ácidos graxos poliinsaturados (8,12%) no músculo, e também relações mais elevadas de ácidos graxos insaturados:saturados (0,93) e ácidos graxos poliinsaturados:saturados (0,16) em comparação àqueles que receberam a dieta convencional, à base de silagem de milho (0,34%; 6,31%; 0,86; e 0,11, respectivamente). A composição em ácidos graxos da carne de bovinos pode ser melhorada com a utilização de cana-de-açúcar e grãos de girassol na dieta dos animais terminados em confinamento.

O masculino em revista: mídia, discurso e modos de subjetivação afetivos-sexuais

This dissertation has the thematic of the sexual affection of the masculine subjectivity within texts of Universo Masculino and Men‟s Health magazines as object of analysis. The central objective was to describe and interpret the theme on the masculine subjectivity in discourses about the affection of sexuality materialized in discourse practices in those magazines. The main point of the research matters how the discourse structures of texts in those magazines make it possible to comprehend the meanings produced about the masculinity nowadays. On the perspective of the thematic trajectory what consists the main aspect that concerns the leading of corpus in the research under the French discourse analysis, we have searched, in reports of those magazines, an arch-genealogy of masculinity, from a specific sexual-affection disposable of our mediate culture. The analytic trajectory enables us to conclude that the thematic trajectory about the sexual affection of the masculine subjectivity produces a semantic way that confirms hegemony and hetero-normative ideals, rather than what proposes new performances on the masculine subjectivity experiences. In its real effects, such mediate discourse practice pursues to link certain sexual affection knowledge to the male individual‟s lifestyle today, from the thematic choices, enunciation modalities and discourse strategies which are specific to the masculine media

Influência da enxertia nas trocas gasosas de dois híbridos de berinjela cultivados em ambiente protegido

Compararam-se os efeitos da enxertia nas trocas gasosas de dois híbridos de berinjela em pé franco e enxertado. Conduziu-se um ensaio em ambiente protegido, na FCA/UNESP, em estrutura simples, tipo arco com 7 m de largura, 40 m de comprimento e 3 m de pé direito, cobertos por filme plástico de 100 micrometros. Foram utilizados os híbridos de berinjela Nápoli e Kokuyo, enxertados em porta-enxerto específico (híbrido Taibyo VF) para esta espécie. O delineamento experimental utilizado foi inteiramente casualizado, com quatro tratamentos (Nápoli pé franco, Nápoli enxertada, Kokuyo pé franco e Kokuyo enxertada) com dez repetições. A assimilação líquida de CO2 (A), transpiração (E), condutância estomática (g s) e eficiência no uso de água (EUA), obtida pela relação (A/E), foram determinadas às 09:00; 12:00; 14:00 e 16:00 horas em um dia sem nebulosidade com fluxo de fótons fotossinteticamente ativos (FFFA) de 937±126 mmol m-2 s-1, com um sistema fechado portátil de fotossíntese, IRGA, modelo LI-6200 (LI-COR). Observou-se que as plantas do híbrido Kokuyo apresentaram maiores valores para as variáveis A, E, g s e EUA que o híbrido Nápoli. A enxertia não afetou a capacidade fotossintética dos híbridos, porém, esta resultou em menores valores de E e g s nos dois híbridos, levando à maior EUA, efeito este que na prática pode resultar em menor demanda de água pelas plantas.

Compósitos híbridos: desenvolvimento de configuração e efeitos de umidificação

The advantage in using vegetable fibres in place of synthetic fibres such as glass fibre, for reinforcements in composites are: biodegradability, low cost, low density, good tenacity, good thermal properties, low energy content and reduced use of instruments for its treatment or processing. Even though, problems related to low mechanical performance of some of the natural fibres, has caused difficulty in their direct application in structural elements. The use of alternative materials like hybrid composites has been encouraged, thus trying to better the structural performance of the composites with natural fibres. This work presents a comparative study of the strength and stiffness of hybrid composites with orthopthalic polyester matrix reinforced with E-fibre glass, jute and curauá. The experimental part includes uniaxial tension and three point bending tests to determine the mechanical properties of the final product. The hybrid composite was manufactured in a local industry and was in the form of laminates. All the samples were projected to withstand the possible structural applications as reservoirs and pipes. CH (laminated hybrid composite with glass and curauá fibres). The results obtained show clearly the influence of the hybridization in all the types tested and indicate a good mechanical performance of the composite with glass/curauá fibres in relation to the composite with glass fibres. Aspects in relation to the interfaces glass/curauá composites besides the fracture characteristics for all loading types were also analysed

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado

With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50%

Estudo da presença de entalhes semicirculares em compósitos poliméricos híbridos

Composite materials have a wide application in various sectors, such as the medical field in the manufacture of prostheses, in automotive and aerospace. Thus it is essential to the development of new composite and a better understanding in the face of various loading conditions and service. Several structural elements are manufactured in the presence of geometric discontinuity (notch, hole, etc ) in their longitudinal sections and/or cross-cutting, and these affect the mechanical response of these elements. The objective is to study the mechanical response of laminated polymer matrix hybrid composites reinforced with glass fiber/jute in a uniaxial tensile test. The mechanical response takes in account both the influence of the presence of a geometric discontinuity (semicircular notches) and the orientation of fibers in the layers (anisotropy). The semicircular notches are located in longitudinal section (with a reduction in cross section) of the same. In this analysis, the anisotropy is characterized by types of configurations (with different orientations of fibers in the outer layers). A comparative study of mechanical properties with and without the presence of notches is developed. Both configurations consist of four layers of woven jute fiber bidirectional and a central layer of bidirectional woven glass fibers. In addition to the mechanical properties was also studied the characteristics of the fracture developed in each composite laminate. The results showed that in the comparative study, the anisotropy and the presence of semicircular notches directly influences the mechanical behavior of laminates composites, mainly in reducing the tensile strength, and well as the final characteristics of the fracture

Comportamento de híbridos de couve chinesa à isolados de Plasmodiophora brassicae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da umidade nas propriedades mecânicas dos compósitos poliméricos híbridos (sisal/ vidro)

This study aims to evaluate the mechanical properties of polymer matrix composites reinforced with sisal fabric bidirectional tissue (Agave sisalana,) and E-glass fibers, containing the following configuration: a polymer matrix hybrid composite (Polyester Resin orthophalic) reinforced with three (3) layers of glass fibers and alternating-2 (two) layers of bidirectional sisal fabric, and finally a composite of polymer matrix reinforced with five (5) layers of glass fiber mat-type E. For this purpose as first step, the preparation of by sisal, since they are not on the market. The composites were made by manual lamination (Hand lay-up) and evaluated for tensile properties and three point bending both in the dry, and wet conditions aswele as immersed in oil. Macroscopic and microscopic characteristics of the materialsweve awalysed, after the completion of the mechanical tests. After the studies, it was proven that the sisal fiber decreases the tensile stiffness of the material above 50% for both situations studied the tensile strength of the material decreases by approximately 40% for the cases mentioned, and when compared to the specific strength stiffness values drop to 14.6% and 29.02% respectively for the dry state only. Constants for bending the values were are to approximately 50% to 25% for strength and stiffness of the material for the cases dry, wet and immersed in oil. Under the influence of tension fluids do not interfere in the stiffness of the material for the bending tests, the same does not occur with the resistance, and these values are modified only in the cases stiffness and flexural strength

Envelhecimento ambiental em compósitos poliméricos à base de tecidos de reforços híbridos

The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber