Uso da avaliação do ciclo de vida para a determinação na redução de emissões de gases do efeito estufa e do consumo de energia associados a reciclagem de EPS

Pós-graduação em Engenharia Mecânica - FEG

Influence of soil water potential in the action of herbicides on goosegrass (Eleusine indica (L) Gaertn)

Currently, the use of herbicides is essential in a practical and common in agricultural areas, but efficiency of these herbicides can be compromised when applied on plants that thrive in water deficit conditions, due to low uptake and translocation of the product. Therefore, the aim of this study was to compare the efficiency of control ACCase inhibiting herbicides applied post-emergence in plants of Eleusine indica under different soil water contents. The experiment was conducted in a greenhouse and the experimental design was completely randomized design with four replications, consisting of a 9x4 factorial, with the combination of three soil water potentials (-0.03, -0.07 and -1.5 MPa) three herbicides (fluazifop-p -butyl, haloxyfop-methyl and sethoxydim + oil) and four doses (0, 25, 50, and 100 % of the recommended dose). Herbicide application was made in plants in vegetative stage 2-3 tillers. The soil water potential was initiated in the development stage of two leaves, and the water was supplemented until the soil reaches the potential of -0.01 MPa, when it came to minimum pre-determined for each water management. The physiological parameters evaluated were: photosynthetic rate, stomatal conductance, transpiration leaf temperature and plant dry mass. The visual assessments of phytotoxicity were performed at 7 and 14 days after application. The herbicides behaved in different ways according to the used water management. In severe water stress conditions (soil moisture at 8%) only fluazifop-p-butyl herbicide achieved satisfactory control (> 90%) in E. indica plants.

Allium cepa and Tradescantia pallida bioassays to evaluate effects of the insecticide imidacloprid

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Compósitos preparados a partir de resíduo industrial de couro com elastômeros termoplásticos obtidos através de blendas de polietileno de baixa densidade e borracha natural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Materiais derivados de hidróxidos duplos lamelares: síntese, caracterização e aplicação em adsorção e processos avançados de oxidação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interferência intra e interespecífica de Urochloa decumbens e Synedrellopsis grisebachii

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Diagnóstico e proposta de diretrizes para o gerenciamento de resíduos sólidos no município de Rio Claro (SP)

Over the last few years, Brazil has some problems related to the management of solid waste, mainly related to the final disposal of materials, resulting in serious environmental risks to the municipalities that suffer from this type of situation. Poorly designed landfills and weak management systems after the termination of their employment, for example, is currently showing as a major problem for urban expansion and the subsoil of these sites, endangering all the environmental quality of the areas where they are located . Because of this scenario, this work produced a diagnosis of the current situation of the management of solid waste in the city of Rio Claro (SP) from its generation, through selective collection and sorting, as well as its final destination, in order to propose a reflection on current form management, in order to present some guidelines based on Federal Law 12.305 / 2010 - National Solid Waste Policy for improvement of this issue in the city. Although the situation found in the city can be considered reasonable for good, there is a need to improve and how to manage, especially in the operational issue of selective collection and also the participation of society in the category Environmental Education, converging in the search for improvements to the common good

Avaliação de contaminação com óleo diesel por meio dos métodos de Eletrorresistividade e Polarização Induzida em Santa Ernestina-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

As características da temperatura do ar em bairros com produção do espaço urbano distintas: uma análise do Parque Higienópolis e Jd. Morada do Sol em Presidente Prudente-SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

As características da temperatura do ar em bairros com produção do espaço urbano distintas: uma análise do Parque Higienópolis e Jd. Morada do Sol em Presidente Prudente-SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chemical Modifications in Styrene-Butadiene Rubber after Microwave Devulcanization

Microwave devulcanization has been studied as a method for elastomer recycling, which is based on the conversion of the reticulated and infusible structure of thermosetting rubbers in free polymeric chains able to be remolded by thermomechanical processing in recycling operations for the manufacture of other products. Elastomeric wastes are often irregularly discarded in nature, producing serious environmental damage, and their mechanical recycling is still considered a challenge. Thus, the development of alternatives for elastomer recycling is directly related to the actions of sustainable development and economic benefits to companies that pay to discard their wastes. The aim of this work is to evaluate the chemical modifications occurring in styrene butadiene rubber (SBR) after microwave devulcanization. Compounds of SBR were vulcanized in the presence of vulcanization agents and variable amounts of carbon black, and then the rubbers were milled and submitted to microwave treatment. Only the SBR with high carbon black content shows some portion of devulcanized material. However, the rubber with lower content of carbon black which was devulcanized by microwave radiation shows an increase in cross-link density. The microwave treatment also causes cross-link breaks mainly in polysulfidic bonds as well as decomposition of chemical groups containing sulfur attached to the chemical structure of SBR, while. the chemical bonds of higher energy such as monosulfidic bonds remain preserved. The improvement of the microwave method for rubber devulcanization represents a way for viable recycling of thermosetting rubbers.

Caracterización del comportamiento hidráulico y químico del picón como material para la depuración natural del estiércol líquido de rumiantes

[ES] Los efluentes ganaderos constituyen un beneficioso aporte de nutrientes para los cultivos, que es fundamental a la hora de garantizar la sostenibilidad de la gestión de las explotaciones ganaderas, pudiendo ocasionar graves problemas ambientales si se emplean mal. La intensificación agraria ha convertido los efluentes ganaderos de subproducto a residuo. Su tratamiento con materiales locales y tecnologías de baja intensidad es una solución de bajo coste financiero y energético. En el proyecto REAGUA se plantea la posibilidad de utilizar el “picón” (lapilli) como material para el tratamiento del estiércol líquido de rumiantes, para su posterior empleo en el riego enterrado de especies forrajeras y biocombustibles, actuando el suelo como medio de depuración avanzado. Para ello, se diseña un sistema en el que se aporte el efluente con un flujo subsuperficial vertical en un medio no saturado, que circule por tres fases (en serie). Para determinar las condiciones de manejo que optimicen el filtrado se caracterizó el comportamiento hidráulico del picón y su capacidad de eliminar sustancias. Utilizando tres columnas rellenas de picón y un efluente de rumiantes, las reducciones de la DQO, DBO5 y amonio, fósforo y SS superaron el 80, 90% y 95% respectivamente, obteniéndose valores asumibles para inyectarse al riego.

Auswirkungen des Klimawandels auf die klein- und großräumige genetische Populationsstruktur von Makrozoobenthos in Rhein, Main und Mosel

In den letzten Jahrzehnten wurde eine deutliche, anhaltende Veränderung des globalen Klimas beobachtet, die in Zukunft zu einer Erhöhung der durchschnittlichen Oberflächentemperatur, erhöhten Niederschlagsmengen und anderen gravierenden Umweltveränderungen führen wird (IPCC 2001). Der Klimawandel wird in Flüssen sowohl mehr Extremereignisse verursachen als auch das Abflussregime bisher schmelzwasserdominierter Flüsse zu grundwassergespeisten hin ändern; dies gilt insbesondere für den Rhein (MIDDELKOOP et al. 2001). Um die möglichen Auswirkungen dieser Veränderungen auf die genetische Populationsstruktur von Makrozoobenthosorganismen vorhersagen zu können, wurden in den grundwassergespeisten Flüssen Main und Mosel sowie im Rhein Entnahmestellen oberhalb und unterhalb von Staustufen beprobt, die durch kontrastierende Strömungsverhältnisse als Modell für die zu erwartenden Änderungen dienten. Als Untersuchungsobjekt wurden Dreissena polymorpha PALLAS 1771 sowie Dikerogammarus villosus SOWINSKI 1894 herangezogen. Sie zeichnen sich durch hohe Abundanzen aus, sind aber unterschiedlich u.a. hinsichtlich ihrer Besiedlungsstrategie und –historie. Bei beiden Spezies sind die phylogeographischen Hintergründe bekannt; daher wurde auch versucht, die Einwanderungsrouten in der Populationsstruktur nachzuweisen (phylogeographisches Szenario). Dies konkurrierte mit der möglichen Anpassung der Spezies an das Abflussregime des jeweiligen Flusses (Adaptations-Szenario). Die Populationen wurden molekulargenetisch mit Hilfe der AFLP-Methode („Amplified-Fragment Length Polymorphism“) untersucht. Die Ergebnisse zeigen, dass D. polymorpha deutlich durch die Abflussregimes der Flüsse (Schmelz- oder Grundwasserdominanz) beeinflusst wird. Die Allelfrequenzen in Populationen des Rheins sind von denen der beiden grundwassergespeisten Flüsse Main und Mosel deutlich unterscheidbar (Adaptations-Szenario). Jedoch ist kein Unterschied der genetischen Diversitäten zu beobachten; das ist auf die lange Adaptation an ihre jeweiligen Habitate durch die lange Besiedlungsdauer zurückzuführen. Dies ist auch der Grund, warum die Einwanderungsrouten anhand der Populationsstruktur nicht mehr nachzuweisen waren. Die kontrastierenden Strömungsverhältnisse um die Staustufen hatten ebenfalls keine konsistenten Auswirkungen auf die genetische Diversität der Populationen. Diese Ergebnisse zeigen eine hohe phänotypische Plastizität der Spezies und dadurch eine große Anpassungsfähigkeit an wechselnde Umweltbedingungen, die unter anderem für den großen Erfolg dieser Spezies verantwortlich ist. D. villosus wanderte erst vor Kurzem in das Untersuchungsgebiet ein; die Einwanderungsroute war anhand der genetischen Diversität nachvollziehbar (phylogeographisches Szenario); durch die kurze Besiedlungsdauer war eine Adaptation an die divergenten Abflussregime der Flüsse nicht zu erwarten und wurde auch nicht gefunden. Dagegen war ein deutlicher negativer Einfluss von starker Strömung auf die genetische Diversität nachweisbar. Die Ergebnisse weisen darauf hin, dass die zukünftigen Auswirkungen des Klimawandels auf die Strömungsgeschwindigkeit negative Konsequenzen auf die genetische Diversität von D. villosus haben werden, während D. polymorpha hier keine Auswirkungen erkennen lässt. Die Auswirkungen des veränderten Abflussregimes im Rhein sind für D. villosus mit den vorliegenden Daten aufgrund der kurzen Besiedlungsdauer nicht vorhersagbar; D. polymorpha wird durch die Veränderung des Rheins zu einem grundwassergespeisten Fluss zwar einen Wandel in der genetischen Struktur erfahren, aber auch hier keine Einbußen in der genetischen Diversität erleiden.

Produzione di bioetanolo da effluenti del settore lattiero-caseario con Kluyveromyces marxianus

Il siero di latte e la scotta sono effluenti provenienti rispettivamente dal processo di trasformazione del latte in formaggio e ricotta. Il siero di latte contiene minerali, lipidi, lattosio e proteine; la scotta contiene principalmente lattosio. Il siero può essere riutilizzato in diversi modi, come l'estrazione di proteine o per l’alimentazione animale, mentre la scotta è considerata solamente un rifiuto. Inoltre, a causa degli ingenti volumi di siero prodotti nel mondo, vengono a crearsi seri problemi ambientali e di smaltimento. Destinazioni alternative di questi effluenti, come le trasformazioni biotecnologiche, possono essere un modo per raggiungere il duplice obiettivo di migliorare il valore aggiunto dei processi agroindustriali e di ridurre il loro impatto ambientale. In questo lavoro sono state studiate le condizioni migliori per produrre bioetanolo dal lattosio del siero e della scotta. Kluyveromyces marxianus è stato scelto come lievito lattosio-fermentante. Sono state effettuate fermentazioni su scala di laboratorio aerobiche e anaerobiche in batch, fermentazioni semicontinue in fase dispersa e con cellule immobilizzate in alginato di calcio,. Diverse temperature sono state testate per migliorare la produzione di etanolo. Le migliori prestazioni, per entrambe le matrici, sono state raggiunte a basse temperature (28°C). Anche le alte temperature sono compatibili con buone rese di etanolo nelle fermentazioni con siero. Ottimi risultati si sono ottenuti anche con la scotta a 37°C e a 28°C. Le fermentazioni semicontinue in fase dispersa danno le migliori produzioni di etanolo, in particolare con la scotta. Invece, l'uso di cellule di lievito intrappolate in alginato di calcio non ha migliorato i risultati di processo. In conclusione, entrambi gli effluenti possono essere considerati adatti per la produzione di etanolo. Le buone rese ottenute dalla scotta permettono di trasformare questo rifiuto in una risorsa.

ELECTRICITY GENERATION MODELING AND PHOTOVOLTAIC FORECASTS IN CHINA

With the economic development of China, the demand for electricity generation is rapidly increasing. To explain electricity generation, we use gross GDP, the ratio of urban population to rural population, the average per capita income of urban residents, the electricity price for industry in Beijing, and the policy shift that took place in China. Ordinary least squares (OLS) is used to develop a model for the 1979-2009 period. During the process of designing the model, econometric methods are used to test and develop the model. The final model is used to forecast total electricity generation and assess the possible role of photovoltaic generation. Due to the high demand for resources and serious environmental problems, China is pushing to develop the photovoltaic industry. The system price of PV is falling; therefore, photovoltaics may be competitive in the future.