In vitro precision of fit of computer-aided designed and computer-aided manufactured titanium screw-retained fixed dental prostheses before and after ceramic veneering

OBJECTIVE To compare the precision of fit of full-arch implant-supported screw-retained computer-aided designed and computer-aided manufactured (CAD/CAM) titanium-fixed dental prostheses (FDP) before and after veneering. The null-hypothesis was that there is no difference in vertical microgap values between pure titanium frameworks and FDPs after porcelain firing. MATERIALS AND METHODS Five CAD/CAM titanium grade IV frameworks for a screw-retained 10-unit implant-supported reconstruction on six implants (FDI tooth positions 15, 13, 11, 21, 23, 25) were fabricated after digitizing the implant platforms and the cuspid-supporting framework resin pattern with a laser scanner (CARES(®) Scan CS2; Institut Straumann AG, Basel, Switzerland). A bonder, an opaquer, three layers of porcelain, and one layer of glaze were applied (Vita Titankeramik) and fired according to the manufacturer's preheating and fire cycle instructions at 400-800°C. The one-screw test (implant 25 screw-retained) was applied before and after veneering of the FDPs to assess the vertical microgap between implant and framework platform with a scanning electron microscope. The mean microgap was calculated from interproximal and buccal values. Statistical comparison was performed with non-parametric tests. RESULTS All vertical microgaps were clinically acceptable with values <90 μm. No statistically significant pairwise difference (P = 0.98) was observed between the relative effects of vertical microgap of unveneered (median 19 μm; 95% CI 13-35 μm) and veneered FDPs (20 μm; 13-31 μm), providing support for the null-hypothesis. Analysis within the groups showed significantly different values between the five implants of the FDPs before (P = 0.044) and after veneering (P = 0.020), while a monotonous trend of increasing values from implant 23 (closest position to screw-retained implant 25) to 15 (most distant implant) could not be observed (P = 0.169, P = 0.270). CONCLUSIONS Full-arch CAD/CAM titanium screw-retained frameworks have a high accuracy. Porcelain firing procedure had no impact on the precision of fit of the final FDPs. All implant microgap measurements of each FDP showed clinically acceptable vertical misfit values before and after veneering. Thus, the results do not only show accurate performance of the milling and firing but show also a reproducible scanning and designing process.

A multifactorial histopathologic score for the prediction of prognosis of resected esophageal adenocarcinomas after neoadjuvant chemotherapy

BACKGROUND For esophageal adenocarcinoma treated with neoadjuvant chemotherapy, postoperative staging classifications initially developed for non-pretreated tumors may not accurately predict prognosis. We tested whether a multifactorial TNM-based histopathologic prognostic score (PRSC), which additionally applies to tumor regression, may improve estimation of prognosis compared with the current Union for International Cancer Control/American Joint Committee on Cancer (UICC) staging system. PATIENTS AND METHODS We evaluated esophageal adenocarcinoma specimens following cis/oxaliplatin-based therapy from two separate centers (center 1: n = 280; and center 2: n = 80). For the PRSC, each factor was assigned a value from 1 to 2 (ypT0-2 = 1 point; ypT3-4 = 2 points; ypN0 = 1 point; ypN1-3 = 2 points; ≤50 % residual tumor/tumor bed = 1 point; >50 % residual tumor/tumor bed = 2 points). The three-tiered PRSC was based on the sum value of these factors (group A: 3; group B: 4-5; group C: 6) and was correlated with patients' overall survival (OS). RESULTS The PRSC groups showed significant differences with respect to OS (p < 0.0001; hazard ratio [HR] 2.2 [95 % CI 1.7-2.8]), which could also be demonstrated in both cohorts separately (center 1 p < 0.0001; HR 2.48 [95 % CI 1.8-3.3] and center 2 p = 0.015; HR 1.7 [95 % CI 1.1-2.6]). Moreover, the PRSC showed a more accurate prognostic discrimination than the current UICC staging system (p < 0.0001; HR 1.15 [95 % CI 1.1-1.2]), and assessment of two goodness-of-fit criteria (Akaike Information Criterion and Schwarz Bayesian Information Criterion) clearly supported the superiority of PRSC over the UICC staging. CONCLUSION The proposed PRSC clearly identifies three subgroups with different outcomes and may be more helpful for guiding further therapeutic decisions than the UICC staging system.

Prognostic implications of the seventh edition of the international union against cancer classification for patients with gastric cancer: the Western experience of patients treated in a single-center European institution

PURPOSE Validity of the seventh edition of the American Joint Committee on Cancer/International Union Against Cancer (AJCC/UICC) staging systems for gastric cancer has been evaluated in several studies, mostly in Asian patient populations. Only few data are available on the prognostic implications of the new classification system on a Western population. Therefore, we investigated its prognostic ability based on a German patient cohort. PATIENTS AND METHODS Data from a single-center cohort of 1,767 consecutive patients surgically treated for gastric cancer were classified according to the seventh edition and were compared using the previous TNM/UICC classification. Kaplan-Meier analyses were performed for all TNM stages and UICC stages in a comparative manner. Additional survival receiver operating characteristic analyses and bootstrap-based goodness-of-fit comparisons via Bayesian information criterion (BIC) were performed to assess and compare prognostic performance of the competing classification systems. RESULTS We identified the UICC pT/pN stages according to the seventh edition of the AJCC/UICC guidelines as well as resection status, age, Lauren histotype, lymph-node ratio, and tumor grade as independent prognostic factors in gastric cancer, which is consistent with data from previous Asian studies. Overall survival rates according to the new edition were significantly different for each individual's pT, pN, and UICC stage. However, BIC analysis revealed that, owing to higher complexity, the new staging system might not significantly alter predictability for overall survival compared with the old system within the analyzed cohort from a statistical point of view. CONCLUSION The seventh edition of the AJCC/UICC classification was found to be valid with distinctive prognosis for each stage. However, the AJCC/UICC classification has become more complex without improving predictability for overall survival in a Western population. Therefore, simplification with better predictability of overall survival of patients with gastric cancer should be considered when revising the seventh edition.

Gender-fair language in the context of leadership: Preventing the lack of fit for women

Women are still underrepresented in leadership due to a perceived a ‘lack of fit’. Thus, women are hired less likely, evaluated unfavorably or are less willing to take over a leadership role than their male counterparts. Because gender-fair language (e.g., feminine-masculine word pairs, German: ‘Geschäftsführerin/Geschäftsführer’, CEO, fem./CEO, masc.) leads to a higher mental inclusion of women compared to generic masculine forms (German: ‘Geschäftsführer’, CEO,masc.), we argue that masculine forms endorse the ‘lack of fit’ for women in leadership, whereas gender-fair language reduces it. Three studies support our assumption. Masculine forms led to a ‘lack of fit’ for women in leader selection: they were hired less likely (Study 1) and evaluated less favorably (Study 2) than their male counterparts. Moreover, women showed less willingness to apply when masculine forms were used in the advertisement for a leadership position. Contrary, no such gender-bias was obtained in case of gender-fair language.

Detection of nonrandom association of alleles from the distribution of the number of heterozygous loci in a sample.

The distribution of the number of heterozygous loci in two randomly chosen gametes or in a random diploid zygote provides information regarding the nonrandom association of alleles among different genetic loci. Two alternative statistics may be employed for detection of nonrandom association of genes of different loci when observations are made on these distributions: observed variance of the number of heterozygous loci (s2k) and a goodness-of-fit criterion (X2) to contrast the observed distribution with that expected under the hypothesis of random association of genes. It is shown, by simulation, that s2k is statistically more efficient than X2 to detect a given extent of nonrandom association. Asymptotic normality of s2k is justified, and X2 is shown to follow a chi-square (chi 2) distribution with partial loss of degrees of freedom arising because of estimation of parameters from the marginal gene frequency data. Whenever direct evaluations of linkage disequilibrium values are possible, tests based on maximum likelihood estimators of linkage disequilibria require a smaller sample size (number of zygotes or gametes) to detect a given level of nonrandom association in comparison with that required if such tests are conducted on the basis of s2k. Summarization of multilocus genotype (or haplotype) data, into the different number of heterozygous loci classes, thus, amounts to appreciable loss of information.

Precision of fit and retention force of cast non-precious-crowns on standard titanium implant-abutment with different design and height

OBJECTIVE The cost-effectiveness of cast nonprecious frameworks has increased their prevalence in cemented implant crowns. The purpose of this study was to assess the effect of the design and height of the retentive component of a standard titanium implant abutment on the fit, possible horizontal rotation and retention forces of cast nonprecious alloy crowns prior to cementation. MATERIALS AND METHODS Two abutment designs were examined: Type A with a 6° taper and 8 antirotation planes (Straumann Tissue-Level RN) and Type B with a 7.5° taper and 1 antirotation plane (SICace implant). Both types were analyzed using 60 crowns: 20 with a full abutment height (6 mm), 20 with a medium abutment height (4 mm), and 20 with a minimal (2.5 mm) abutment height. The marginal and internal fit and the degree of possible rotation were evaluated by using polyvinylsiloxane impressions under a light microscope (magnification of ×50). To measure the retention force, a custom force-measuring device was employed. STATISTICAL ANALYSIS one-sided Wilcoxon rank-sum tests with Bonferroni-Holm corrections, Fisher's exact tests, and Spearman's rank correlation coefficient. RESULTS Type A exhibited increased marginal gaps (primary end-point: 55 ± 20 μm vs. 138 ± 59 μm, P < 0.001) but less rotation (P < 0.001) than Type B. The internal fit was also better for Type A than for Type B (P < 0.001). The retention force of Type A (2.49 ± 3.2 N) was higher (P = 0.019) than that of Type B (1.27 ± 0.84 N). Reduction in abutment height did not affect the variables observed. CONCLUSION Less-tapered abutments with more antirotation planes provide an increase in the retention force, which confines the horizontal rotation but widens the marginal gaps of the crowns. Thus, casting of nonprecious crowns with Type A abutments may result in clinically unfavorable marginal gaps.

Precision of fit of implant-supported screw-retained 10-unit computer-aided-designed and computer-aided-manufactured frameworks made from zirconium dioxide and titanium: an in vitro study

OBJECTIVE To analyze the precision of fit of implant-supported screw-retained computer-aided-designed and computer-aided-manufactured (CAD/CAM) zirconium dioxide (ZrO) frameworks. MATERIALS AND METHODS Computer-aided-designed and computer-aided-manufactured ZrO frameworks (NobelProcera) for a screw-retained 10-unit implant-supported reconstruction on six implants (FDI positions 15, 13, 11, 21, 23, 25) were fabricated using a laser (ZrO-L, N = 6) and a mechanical scanner (ZrO-M, N = 5) for digitizing the implant platform and the cuspid-supporting framework resin pattern. Laser-scanned CAD/CAM titanium (TIT-L, N = 6) and cast CoCrW-alloy frameworks (Cast, N = 5) fabricated on the same model and designed similar to the ZrO frameworks were the control. The one-screw test (implant 25 screw-retained) was applied to assess the vertical microgap between implant and framework platform with a scanning electron microscope. The mean microgap was calculated from approximal and buccal values. Statistical comparison was performed with non-parametric tests. RESULTS No statistically significant pairwise difference was observed between the relative effects of vertical microgap between ZrO-L (median 14 μm; 95% CI 10-26 μm), ZrO-M (18 μm; 12-27 μm) and TIT-L (15 μm; 6-18 μm), whereas the values of Cast (236 μm; 181-301 μm) were significantly higher (P < 0.001) than the three CAD/CAM groups. A monotonous trend of increasing values from implant 23 to 15 was observed in all groups (ZrO-L, ZrO-M and Cast P < 0.001, TIT-L P = 0.044). CONCLUSIONS Optical and tactile scanners with CAD/CAM technology allow for the fabrication of highly accurate long-span screw-retained ZrO implant-reconstructions. Titanium frameworks showed the most consistent precision. Fit of the cast alloy frameworks was clinically inacceptable.

Combination of expression levels of miR-21 and miR-126 is associated with cancer-specific survival in clear-cell renal cell carcinoma

BACKGROUND Renal cell carcinoma (RCC) is marked by high mortality rate. To date, no robust risk stratification by clinical or molecular prognosticators of cancer-specific survival (CSS) has been established for early stages. Transcriptional profiling of small non-coding RNA gene products (miRNAs) seems promising for prognostic stratification. The expression of miR-21 and miR-126 was analysed in a large cohort of RCC patients; a combined risk score (CRS)-model was constructed based on expression levels of both miRNAs. METHODS Expression of miR-21 and miR-126 was evaluated by qRT-PCR in tumour and adjacent non-neoplastic tissue in n = 139 clear cell RCC patients. Relation of miR-21 and miR-126 expression with various clinical parameters was assessed. Parameters were analysed by uni- and multivariate COX regression. A factor derived from the z-score resulting from the COX model was determined for both miRs separately and a combined risk score (CRS) was calculated multiplying the relative expression of miR-21 and miR-126 by this factor. The best fitting COX model was selected by relative goodness-of-fit with the Akaike information criterion (AIC). RESULTS RCC with and without miR-21 up- and miR-126 downregulation differed significantly in synchronous metastatic status and CSS. Upregulation of miR-21 and downregulation of miR-126 were independently prognostic. A combined risk score (CRS) based on the expression of both miRs showed high sensitivity and specificity in predicting CSS and prediction was independent from any other clinico-pathological parameter. Association of CRS with CSS was successfully validated in a testing cohort containing patients with high and low risk for progressive disease. CONCLUSIONS A combined expression level of miR-21 and miR-126 accurately predicted CSS in two independent RCC cohorts and seems feasible for clinical application in assessing prognosis.

Demographic model of the Swiss cattle population for the years 2009-2011 stratified by gender, age and production type

Demographic composition and dynamics of animal and human populations are important determinants for the transmission dynamics of infectious disease and for the effect of infectious disease or environmental disasters on productivity. In many circumstances, demographic data are not available or of poor quality. Since 1999 Switzerland has been recording cattle movements, births, deaths and slaughter in an animal movement database (AMD). The data present in the AMD offers the opportunity for analysing and understanding the dynamic of the Swiss cattle population. A dynamic population model can serve as a building block for future disease transmission models and help policy makers in developing strategies regarding animal health, animal welfare, livestock management and productivity. The Swiss cattle population was therefore modelled using a system of ordinary differential equations. The model was stratified by production type (dairy or beef), age and gender (male and female calves: 0-1 year, heifers and young bulls: 1-2 years, cows and bulls: older than 2 years). The simulation of the Swiss cattle population reflects the observed pattern accurately. Parameters were optimized on the basis of the goodness-of-fit (using the Powell algorithm). The fitted rates were compared with calculated rates from the AMD and differed only marginally. This gives confidence in the fitted rates of parameters that are not directly deductible from the AMD (e.g. the proportion of calves that are moved from the dairy system to fattening plants).

Reducing women’s lack of fit with leadership? Effects of the wording of job advertisements

Linguistic forms which refer to individuals impact mental representations of these individuals: When masculine generics are used, women tend to be cognitively underrepresented, whereas feminine–masculine word pairs are associated with a higher cognitive inclusion of women. The present research investigates whether linguistic forms affect women’s perceived lack of fit with leadership positions, which is particularly pronounced for high-status leadership positions. In a hiring-simulation experiment (N = 363), we tested the effects of different linguistic forms used in German-language job advertisements: (1) masculine forms (e.g., Geschäftsführer, ‘CEO, masc.’); (2) masculine forms with (m/f) (e.g., Geschäftsführer (m/w), ‘CEO, masc. (m/f)’); and (3) word pairs (e.g., Geschäftsführerin/Geschäftsführer, ‘CEO, fem./CEO, masc.’). The job ads announced either a high- or low-status leadership position. Results showed that female applicants were perceived to fit less well with the high-status position than male applicants when either the masculine or the masculine form with (m/f) was used––even though they were perceived to be equally competent. However, female and male applicants were perceived as fitting the high-status leadership position similarly well when word pairs were used.

Logistic regression models for ordinal response: A study of self-efficacy in colorectal cancer screening

The ordinal logistic regression models are used to analyze the dependant variable with multiple outcomes that can be ranked, but have been underutilized. In this study, we describe four logistic regression models for analyzing the ordinal response variable. ^ In this methodological study, the four regression models are proposed. The first model uses the multinomial logistic model. The second is adjacent-category logit model. The third is the proportional odds model and the fourth model is the continuation-ratio model. We illustrate and compare the fit of these models using data from the survey designed by the University of Texas, School of Public Health research project PCCaSO (Promoting Colon Cancer Screening in people 50 and Over), to study the patient’s confidence in the completion colorectal cancer screening (CRCS). ^ The purpose of this study is two fold: first, to provide a synthesized review of models for analyzing data with ordinal response, and second, to evaluate their usefulness in epidemiological research, with particular emphasis on model formulation, interpretation of model coefficients, and their implications. Four ordinal logistic models that are used in this study include (1) Multinomial logistic model, (2) Adjacent-category logistic model [9], (3) Continuation-ratio logistic model [10], (4) Proportional logistic model [11]. We recommend that the analyst performs (1) goodness-of-fit tests, (2) sensitivity analysis by fitting and comparing different models.^

A comparative analysis of CHIP Perinatal policy in twelve states

The purpose of this comparative analysis of CHIP Perinatal policy (42 CFR § 457) was to provide a basis for understanding the variation in policy outputs across the twelve states that, as of June 2007, implemented the Unborn Child rule. This Department of Health and Human Services regulation expanded in 2002 the definition of “child” to include the period from conception to birth, allowing states to consider an unborn child a “targeted low-income child” and therefore eligible for SCHIP coverage. ^ Specific study aims were to (1) describe typologically the structural and contextual features of the twelve states that adopted a CHIP Perinatal policy; (2) describe and differentiate among the various designs of CHIP Perinatal policy implemented in the states; and (3) develop a conceptual model that links the structural and contextual features of the adopting states to differences in the forms the policy assumed, once it was implemented. ^ Secondary data were collected from publicly available information sources to describe characteristics of states’ political system, health system, economic system, sociodemographic context and implemented policy attributes. I posited that socio-demographic differences, political system differences and health system differences would directly account for the observed differences in policy output among the states. ^ Exploratory data analysis techniques, which included median polishing and multidimensional scaling, were employed to identify compelling patterns in the data. Scaled results across model components showed that economic system was most closely related to policy output, followed by health system. Political system and socio-demographic characteristics were shown to be weakly associated with policy output. Goodness-of-fit measures for MDS solutions implemented across states and model components, in one- and two-dimensions, were very good. ^ This comparative policy analysis of twelve states that adopted and implemented HHS Regulation 42 C.F.R. § 457 contributes to existing knowledge in three areas: CHIP Perinatal policy, public health policy and policy sciences. First, the framework allows for the identification of CHIP Perinatal program design possibilities and provides a basis for future studies that evaluate policy impact or performance. Second, studies of policy determinants are not well represented in the health policy literature. Thus, this study contributes to the development of the literature in public health policy. Finally, the conceptual framework for policy determinants developed in this study suggests new ways for policy makers and practitioners to frame policy arguments, encouraging policy change or reform. ^

Utilization behavior of the elderly in an HMO: A causal analysis

Planning and providing health care services for the elderly represents a major challenge to the health care system. One part of that challenge is the identification of those factors which determine the utilization of services by this population. The purpose of this study is to explain the use of health care services by elderly subscribers in a prepaid group health plan, using the theoretical framework developed by Andersen and Aday. The impact of the predisposing, enabling and need factors on utilization was modelled through a structural equation approach using LISREL. The data were derived from Kaiser-Permanente's Medicare Prospective Payment Project, August 1980-December 1982. Need factors, in general, were the most significant determinants of utilization, with the predisposing and enabling factors found to be secondary but necessary links in the causal chain. The model was fitted to the data from the youngest age group (65-74 years) and then evaluated for goodness of fit in the two older groups (75-84 and 85+ years). Implications of the study's findings and suggestions for further modelling the utilization behavior of the elderly are discussed. ^