Where does Philippine education go? : the "K to 12" program and reform of Philippine basic education

In 2012 the Philippines launched its "K to 12" Program, a comprehensive reform of its basic education. Through this reform, the Philippines is catching up with global standards in secondary education and is attaching a high value to kindergarten. The structure, curricula, and philosophy of the education system are undergoing reform and improvement. The key points of the new policy are "preparation" for higher education, "eligibility" for entering domestic and overseas higher educational institutions, and immediate "employability" on graduating, all leading toward a "holistically developed Filipino". This policy appears admirable and timely, but it faces some pedagogical and socioeconomic problems. The author wants to point out in particular that the policy needs to address gender problems and should be combined with demand-side approaches in order to promote poverty alleviation and human development in the Philippines.

Abstract multiple specialization and its application to program parallelization.

Program specialization optimizes programs for known valúes of the input. It is often the case that the set of possible input valúes is unknown, or this set is infinite. However, a form of specialization can still be performed in such cases by means of abstract interpretation, specialization then being with respect to abstract valúes (substitutions), rather than concrete ones. We study the múltiple specialization of logic programs based on abstract interpretation. This involves in principie, and based on information from global analysis, generating several versions of a program predicate for different uses of such predicate, optimizing these versions, and, finally, producing a new, "multiply specialized" program. While múltiple specialization has received theoretical attention, little previous evidence exists on its practicality. In this paper we report on the incorporation of múltiple specialization in a parallelizing compiler and quantify its effects. A novel approach to the design and implementation of the specialization system is proposed. The resulting implementation techniques result in identical specializations to those of the best previously proposed techniques but require little or no modification of some existing abstract interpreters. Our results show that, using the proposed techniques, the resulting "abstract múltiple specialization" is indeed a relevant technique in practice. In particular, in the parallelizing compiler application, a good number of run-time tests are eliminated and invariants extracted automatically from loops, resulting generally in lower overheads and in several cases in increased speedups.

Global flow analysis as a practical compilation tool

This paper addresses the issue of the practicality of global flow analysis in logic program compilation, in terms of speed of the analysis, precisión, and usefulness of the information obtained. To this end, design and implementation aspects are discussed for two practical abstract interpretation-based flow analysis systems: MA , the MCC And-parallel Analyzer and Annotator; and Ms, an experimental mode inference system developed for SB-Prolog. The paper also provides performance data obtained (rom these implementations and, as an example of an application, a study of the usefulness of the mode information obtained in reducing run-time checks in independent and-parallelism.Based on the results obtained, it is concluded that the overhead of global flow analysis is not prohibitive, while the results of analysis can be quite precise and useful.

On the practicality of global flow analysis of logic programs

This paper addresses the issue of the practicality of global flow analysis in logic program compilation, in terms of both speed and precision of analysis. It discusses design and implementation aspects of two practical abstract interpretation-based flow analysis systems: MA3, the MOO Andparallel Analyzer and Annotator; and Ms, an experimental mode inference system developed for SB-Prolog. The paper also provides performance data obtained from these implementations. Based on these results, it is concluded that the overhead of global flow analysis is not prohibitive, while the results of analysis can be quite precise and useful.

Programming with global analysis

Global data-flow analysis of (constraint) logic programs, which is generally based on abstract interpretation [7], is reaching a comparatively high level of maturity. A natural question is whether it is time for its routine incorporation in standard compilers, something which, beyond a few experimental systems, has not happened to date. Such incorporation arguably makes good sense only if: • the range of applications of global analysis is large enough to justify the additional complication in the compiler, and • global analysis technology can deal with all the features of "practical" languages (e.g., the ISO-Prolog built-ins) and "scales up" for large programs. We present a tutorial overview of a number of concepts and techniques directly related to the issues above, with special emphasis on the first one. In particular, we concéntrate on novel uses of global analysis during program development and debugging, rather than on the more traditional application área of program optimization. The idea of using abstract interpretation for validation and diagnosis has been studied in the context of imperative programming [2] and also of logic programming. The latter work includes issues such as using approximations to reduce the burden posed on programmers by declarative debuggers [6, 3] and automatically generating and checking assertions [4, 5] (which includes the more traditional type checking of strongly typed languages, such as Gódel or Mercury [1, 8, 9]) We also review some solutions for scalability including modular analysis, incremental analysis, and widening. Finally, we discuss solutions for dealing with meta-predicates, side-effects, delay declarations, constraints, dynamic predicates, and other such features which may appear in practical languages. In the discussion we will draw both from the literature and from our experience and that of others in the development and use of the CIAO system analyzer. In order to emphasize the practical aspects of the solutions discussed, the presentation of several concepts will be illustrated by examples run on the CIAO system, which makes extensive use of global analysis and assertions.

A tutorial on program development and optimization using the Ciao preprocessor

We present in a tutorial fashion CiaoPP, the preprocessor of the Ciao multi-paradigm programming system, which implements a novel program development framework which uses abstract interpretation as a fundamental tool. The framework uses modular, incremental abstract interpretation to obtain information about the program. This information is used to validate programs, to detect bugs with respect to partial specifications written using assertions (in the program itself and/or in system libraries), to generate and simplify run-time tests, and to perform high-level program transformations such as multiple abstract specialization, parallelization, and resource usage control, all in a provably correct way. In the case of validation and debugging, the assertions can refer to a variety of program points such as procedure entry, procedure exit, points within procedures, or global computations. The system can reason with much richer information than, for example, traditional types. This includes data structure shape (including pointer sharing), bounds on data structure sizes, and other operational variable instantiation properties, as well as procedure-level properties such as determinacy, termination, non-failure, and bounds on resource consumption (time or space cost).

A language exchange program: sustainability innovation in language and culture engagement

Spanish Educational Laws have been promoting the widespread use of English; as a result, Spanish Uni versities are looking for ways to give students more international training in order to prepare them for a future that will increasingly involve global problems and partnerships. Therefore, the Polytechnic University of Madrid, Spain (UPM), and the University of British Columbia, Okanagan, Canada (UBCO) have come together to offer opportunities for international collaboration and learning, thus facilitating virtual encounters among Spanish and Canadian students. The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages, such as autonomous and life-long learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process. Additionally the ‘virtual’ mobility is provided at no extra cost. This article presents the preliminary results of two virtual exchange programs that have been offering varied forms of study which are venue-independent, and have clearly expanded the range of scenarios for the students on both sides by promoting collaborative work and cultural exchange.

Guidelines for the design of an environmental flow regime program at the regional scale: Application of the ELOHA framework in the Ebro River basin

La gestión de los recursos hídricos se convierte en un reto del presente y del futuro frente a un panorama de continuo incremento de la demanda de agua debido al crecimiento de la población, el crecimiento del desarrollo económico y los posibles efectos del calentamiento global. La política hidráulica desde los años 60 en España se ha centrado en la construcción de infraestructuras que han producido graves alteraciones en el régimen natural de los ríos. Estas alteraciones han provocado y acrecentado los impactos sobre los ecosistemas fluviales y ribereños. Desde los años 90, sin embargo, ha aumentado el interés de la sociedad para conservar estos ecosistemas. El concepto de caudales ambientales consiste en un régimen de caudales que simula las características principales del régimen natural. Los caudales ambientales están diseñados para conservar la estructura y funcionalidad de los ecosistemas asociados al régimen fluvial, bajo la hipótesis de que los elementos que conforman estos ecosistemas están profundamente adaptados al régimen natural de caudales, y que cualquier alteración del régimen natural puede provocar graves daños a todo el sistema. El método ELOHA (Ecological Limits of Hydrological Alteration) tiene como finalidad identificar las componentes del régimen natural de caudales que son clave para mantener el equilibrio de los ecosistemas asociados, y estimar los límites máximos de alteración de estas componentes para garantizar su buen estado. Esta tesis presenta la aplicación del método ELOHA en la cuenca del Ebro. La cuenca del Ebro está profundamente regulada e intervenida por el hombre, y sólo las cabeceras de los principales afluentes del Ebro gozan todavía de un régimen total o cuasi natural. La tesis se estructura en seis capítulos que desarrollan las diferentes partes del método. El primer capítulo explica cómo se originó el concepto “caudales ambientales” y en qué consiste el método ELOHA. El segundo capítulo describe el área de estudio. El tercer capítulo realiza una clasificación de los regímenes naturales de la cuenca (RNC) del Ebro, basada en series de datos de caudal mínimamente alterado y usando exclusivamente parámetros hidrológicos. Se identificaron seis tipos diferentes de régimen natural: pluvial mediterráneo, nivo-pluvial, pluvial mediterréaneo con una fuerte componente del caudal base, pluvial oceánico, pluvio-nival oceánico y Mediterráneo. En el cuarto capítulo se realiza una regionalización a toda la cuenca del Ebro de los seis RNC encontrados en la cueca. Mediante parámetros climáticos y fisiográficos se extrapola la información del tipo de RNC a puntos donde no existen datos de caudal inalterado. El patrón geográfico de los tipos de régimen fluvial obtenido con la regionalización resultó ser coincidente con el patrón obtenido a través de la clasificación hidrológica. El quinto capítulo presenta la validación biológica de los procesos de clasificación anteriores: clasificación hidrológica y regionalización. La validación biológica de los tipos de regímenes fluviales es imprescindible, puesto que los diferentes tipos de régimen fluvial van a servir de unidades de gestión para favorecer el mantenimiento de los ecosistemas fluviales. Se encontraron diferencias significativas entre comunidades biológicas en cinco de los seis tipos de RNC encontrados en la cuenca. Finalmente, en el sexto capítulo se estudian las relaciones hidro-ecológicas existentes en tres de los seis tipos de régimen fluvial encontrados en la cuenca del Ebro. Mediante la construcción de curvas hidro-ecológicas a lo largo de un gradiente de alteración hidrológica, se pueden sugerir los límites de alteración hidrológica (ELOHAs) para garantizar el buen estado ecológico en cada uno de los tipos fluviales estudiados. Se establecieron ELOHAs en tres de los seis tipos de RNC de la cuenca del Ebro Esta tesis, además, pone en evidencia la falta de datos biológicos asociados a registros de caudal. Para llevar a cabo la implantación de un régimen de caudales ambientales en la cuenca, la ubicación de los puntos de muestreo biológico cercanos a estaciones de aforo es imprescindible para poder extraer relaciones causa-efecto de la gestión hidrológica sobre los ecosistemas dependientes. ABSTRACT In view of a growing freshwater demand because of population raising, improvement of economies and the potential effects of climate change, water resources management has become a challenge for present and future societies. Water policies in Spain have been focused from the 60’s on constructing hydraulic infrastructures, in order to dampen flow variability and granting water availability along the year. Consequently, natural flow regimes have been deeply altered and so the depending habitats and its ecosystems. However, an increasing acknowledgment of societies for preserving healthy freshwater ecosystems started in the 90’s and agreed that to maintain healthy freshwater ecosystems, it was necessary to set environmental flow regimes based on the natural flow variability. The Natural Flow Regime paradigm (Richter et al. 1996, Poff et al. 1997) bases on the hypothesis that freshwater ecosystems are made up by elements adapted to natural flow conditions, and any change on these conditions can provoke deep impacts on the whole system. Environmental flow regime concept consists in designing a flow regime that emulates natural flow characteristics, so that ecosystem structure, functions and services are maintained. ELOHA framework (Ecological Limits of Hydrological Alteration) aims to identify key features of the natural flow regime (NFR) that are needed to maintain and preserve healthy freshwater and riparian ecosystems. Moreover, ELOHA framework aims to quantify thresholds of alteration of these flow features according to ecological impacts. This thesis describes the application of the ELOHA framework in the Ebro River Basin. The Ebro River basin is the second largest basin in Spain and it is highly regulated for human demands. Only the Ebro headwaters tributaries still have completely unimpaired flow regime. The thesis has six chapters and the process is described step by step. The first chapter makes an introduction to the origin of the environmental flow concept and the necessity to come up. The second chapter shows a description of the study area. The third chapter develops a classification of NFRs in the basin based on natural flow data and using exclusively hydrological parameters. Six NFRs were found in the basin: continental Mediterranean-pluvial, nivo-pluvial, continental Mediterranean pluvial (with groundwater-dominated flow pattern), pluvio-oceanic, pluvio-nival-oceanic and Mediterranean. The fourth chapter develops a regionalization of the six NFR types across the basin by using climatic and physiographic variables. The geographical pattern obtained from the regionalization process was consistent with the pattern obtained with the hydrologic classification. The fifth chapter performs a biological validation of both classifications, obtained from the hydrologic classification and the posterior extrapolation. When the aim of flow classification is managing water resources according to ecosystem requirements, a validation based on biological data is compulsory. We found significant differences in reference macroinvertebrate communities between five over the six NFR types identified in the Ebro River basin. Finally, in the sixth chapter we explored the existence of significant and explicative flow alteration-ecological response relationships (FA-E curves) within NFR types in the Ebro River basin. The aim of these curves is to find out thresholds of hydrological alteration (ELOHAs), in order to preserve healthy freshwater ecosystem. We set ELOHA values in three NFR types identified in the Ebro River basin. During the development of this thesis, an inadequate biological monitoring in the Ebro River basin was identified. The design and establishment of appropriate monitoring arrangements is a critical final step in the assessment and implementation of environmental flows. Cause-effect relationships between hydrology and macroinvertebrate community condition are the principal data that sustain FA-E curves. Therefore, both data sites must be closely located, so that the effects of external factors are minimized. The scarce hydro-biological pairs of data available in the basin prevented us to apply the ELOHA method at all NFR types.

El nuevo escenario global y un modelo de negocio para la industria naval militar del 2025

Los retos y oportunidades a los que se enfrentan las organizaciones y administraciones de las primeras décadas del siglo XXI se caracterizan por una serie de fuerzas perturbadoras como la globalización, el avance de las tecnologías emergentes y el desequilibrio económico, que están actuando como impulsores de la transformación del mercado. La acción conjunta de estos factores está obligando a todas las empresas industriales a tener que trabajar con mayores y más exigentes niveles de productividad planteándose continuamente como mejorar y lograr satisfacer los requerimientos de los clientes. De esta situación surge la necesidad de volver a plantearse de nuevo ¿quién es el cliente?, ¿qué valora el cliente? y ¿cómo se pueden generan beneficios sostenibles? La aplicación de esta reflexión a la industria naval militar marca los objetivos a los que esta tesis doctoral busca dar respuesta. El primer objetivo, de carácter general, consiste en la definición de un modelo de negocio sostenible para la industria naval militar del 2025 que se adapte a los requisitos del cliente y al nuevo escenario político, económico, social, tecnológico y ambiental que rodea esta industria. El segundo objetivo, consecuencia del modelo general, trata de desarrollar una metodología para ejecutar programas de apoyo al ciclo de vida del “buque militar”. La investigación se estructura en cuatro partes: en la primera se justifica, por un lado, la necesidad del cambio de modelo y por otro se identifican los factores estructurantes para la definición del modelo. La segunda parte revisa la literatura existente sobre uno de los aspectos básicos para el nuevo modelo, el concepto Producto-Servicio. La tercera parte se centra totalmente en la industria naval militar estudiando los aspectos concretos del sector y, en base al trabajo de campo realizado, se identifican los puntos que más valoran las Marinas de Guerra y como estas gestionan al buque militar durante todo su ciclo de vida. Por último se presentan los principios del modelo propuesto y se desarrollan los pilares básicos para la ejecución de proyectos de Apoyo al Ciclo de Vida (ACV). Como resultado de la investigación, el modelo propuesto para la industria naval militar se fundamenta en once principios: 1. El buque militar (producto de alto valor añadido) debe ser diseñado y construido en un astillero del país que desarrolla el programa de defensa. 2. El diseño tiene que estar orientado al valor para el cliente, es decir, se tiene que diseñar el buque militar para que cumpla su misión, eficaz y eficientemente, durante toda su vida operativa, asegurando la seguridad del buque y de las personas y protegiendo el medio ambiente de acuerdo con las regulaciones vigentes. 3. La empresa debe suministrar soluciones integrales de apoyo al ciclo de vida al producto. 4. Desarrollar y mantener las capacidades de integración de sistemas complejos para todo el ciclo de vida del buque militar. 5. Incorporar las tecnologías digitales al producto, a los procesos, a las personas y al propio modelo de negocio. 6. Desarrollar planes de actuación con el cliente domestico a largo plazo. Estos planes tienen que estar basados en tres premisas: (i) deben incluir el ciclo de vida completo, desde la fase de investigación y desarrollo hasta la retirada del buque del servicio; (ii) la demanda debe ser sofisticada, es decir las exigencias del cliente, tanto desde la óptica de producto como de eficiencia, “tiran” del contratista y (iii) permitir el mantenimiento del nivel tecnológico y de las capacidades industriales de la compañía a futuro y posicionarla para que pueda competir en el mercado de exportación. 7. Impulsar el sector militar de exportación mediante una mayor actividad comercial a nivel internacional. 8. Fomentar la multilocalización ya que representa una oportunidad de crecimiento y favorece la exportación posibilitando el suministro de soluciones integrales en el país destino. 9. Reforzar la diplomacia institucional como palanca para la exportación. 10. Potenciar el liderazgo tecnológico tanto en producto como en procesos con políticas activas de I + D+ i. 11. Reforzar la capacidad de financiación con soluciones innovadoras. El segundo objetivo de esta tesis se centra en el desarrollo de soluciones integrales de Apoyo al Ciclo de Vida (ACV). La metodología planteada trata de minimizar la brecha entre capacidades y necesidades a lo largo de la vida operativa del barco. Es decir, el objetivo principal de los programas de ACV es que la unidad conserve durante toda su vida operativa, en términos relativos a las tecnologías existentes, las capacidades equivalentes a las que tendrá cuando entre en servicio. Los ejes de actuación para conseguir que un programa de Apoyo al Ciclo de Vida cumpla su objetivo son: el diseño orientado al valor, la ingeniería de Apoyo al Ciclo de Vida, los proyectos de refresco de tecnología, el mantenimiento Inteligente y los contratos basados en prestaciones. ABSTRACT On the first decades of the 21st century, organizations and administrations face challenges and come across opportunities threatened by a number of disruptive forces such as globalization, the ever-changing emerging technologies and the economic imbalances acting as drivers of the market transformation. This combination of factors is forcing all industrial companies to have more and higher demanding productivity levels, while bearing always in mind how to improve and meet the customer’s requirements. In this situation, we need to question ourselves again: Who is the customer? What does the customer value? And how can we deliver sustainable economic benefits? Considering this matter in a military naval industry framework sets the goals that this thesis intends to achieve. The first general goal is the definition of a new sustainable business model for the 2025 naval industry, adapted to the customer requirements and the new political, economic, social, technological and environmental scenario. And the second goal that arises as a consequence of the general model develops a methodology to implement “warship” through life support programs. The research is divided in four parts: the first one justifies, on the one hand, the need to change the existing model and, on the other, identifies the model structural factors. On the second part, current literature regarding one of the key issues on the new model (the Product-Service concept) is reviewed. Based on field research, the third part focuses entirely on military shipbuilding, analyzing specific key aspects of this field and identifying which of them are valued the most by Navies and how they manage through life cycles of warships. Finally, the foundation of the proposed model is presented and also the basic grounds for implementing a Through Life Support (TLS) program are developed. As a result of this research, the proposed model for the naval industry is based on eleven (11) key principles: 1. The warship (a high added value product) must be designed and built in a shipyard at the country developing the defense program. 2. Design must be customer value oriented, i.e.warship must be designed to effectively fulfill its mission throughout its operational life, ensuring safety at the ship and for the people and protecting the environment in accordance with current regulations. 3. The industry has to provide integrated Through Life Support solutions. 4. Develop and maintain integrated complex systems capabilities for the entire warship life cycle. 5. Introduce the product, processes, people and business model itself to digital technologies. 6. Develop long-term action plans with the domestic customer. These plans must be based on three premises: (i) the complete life cycle must be included, starting from the research and development stage throughout the ship’s disposal; (ii) customer demand has to be sophisticated, i.e. customer requirements, both from the efficiency and product perspective, "attract" the contractor and (iii) technological level and manufacturing capabilities of the company in the future must be maintained and a competitive position on the export market has to be achieved. 7. Promote the military exporting sector through increased international business. 8. Develop contractor multi-location as it entails an opportunity for growth and promote export opportunities providing integrated solutions in the customer's country. 9. Strengthen institutional diplomacy as a lever for export. 10. Promote technological leadership in both product and processes with active R & D & I policies (Research & Development & Innovation) 11. Strengthen financing capacity through innovative solutions. The second goal of this thesis is focused on developing integrated Through Life Support (TLS) solutions. The proposed methodology tries to minimize the gap between needs and capabilities through the ship operational life. It means, the main TLS program objective is to maintain the ship’s performance and capabilities during operational life, in relative terms to current technologies, equivalent to those the ship had when it entered service. The main actions to fulfill the TLS program objectives are: value-oriented design, TLS engineering, technology updating projects, intelligent maintenance and performance based contracts.

The Contribution of Agriculture, Forestry and other Land Use activities to Global Warming, 1990-2012

Date of Acceptance: 16/12/2014 Acknowledgements: This work was carried out with generous funding by the Governments of Germany (GCP/GLO/286/GER) and Norway (GCP/GLO/325/NOR) to the ‘Monitoring and Assessment of GHG Emissions and Mitigation Potential from Agriculture’ Project of the FAO Climate, Energy and Tenure Division. P. Smith is a Royal Society Wolfson Merit Award holder, and his input contributes to the University of Aberdeen Environment and Food Security Theme and to Scotland's ClimateXChange. J. House was funded by a Leverhulme Research Fellowship. The FAO Statistics Division maintains the FAOSTAT Emissions database with regular program funds allocated through Strategic Objective 6. © 2015 John Wiley & Sons Ltd.

North Korea's Nuclear Weapon Program : A Critical Analysis

North Korea's regime has one goal, to guarantee its survival. To accomplish that goal it desired the U.S. to maintain a strong presence on the Korean Peninsula to act as an international deterrent against possible foreign occupation of its nation. The DPRK encouraged the U.S. by signing the 1994 Agreed Framework, a formal commitment between the two countries that froze North Korea's nuclear programs in exchange for U.S. energy aid. In 2002 the Bush Administration did not honour its commitment and blamed North Korea for the Agreed Framework's collapse. North Korea retaliated by choosing to become a nuclear nation, an action guaranteed to insure a constant U.S. presence on the Korean Peninsula.

Reducing visual deficits caused by refractive errors in school and preschool children: results of a pilot school program in the Andean region of Apurimac, Peru

Background: Refractive error is defined as the inability of the eye to bring parallel rays of light into focus on the retina, resulting in nearsightedness (myopia), farsightedness (Hyperopia) or astigmatism. Uncorrected refractive error in children is associated with increased morbidity and reduced educational opportunities. Vision screening (VS) is a method for identifying children with visual impairment or eye conditions likely to lead to visual impairment. Objective: To analyze the utility of vision screening conducted by teachers and to contribute to a better estimation of the prevalence of childhood refractive errors in Apurimac, Peru. Design: A pilot vision screening program in preschool (Group I) and elementary school children (Group II) was conducted with the participation of 26 trained teachers. Children whose visual acuity was<6/9 [20/30] (Group I) and≤6/9 (Group II) in one or both eyes, measured with the Snellen Tumbling E chart at 6 m, were referred for a comprehensive eye exam. Specificity and positive predictive value to detect refractive error were calculated against clinical examination. Program assessment with participants was conducted to evaluate outcomes and procedures. Results: A total sample of 364 children aged 3–11 were screened; 45 children were examined at Centro Oftalmológico Monseñor Enrique Pelach (COMEP) Eye Hospital. Prevalence of refractive error was 6.2% (Group I) and 6.9% (Group II); specificity of teacher vision screening was 95.8% and 93.0%, while positive predictive value was 59.1% and 47.8% for each group, respectively. Aspects highlighted to improve the program included extending training, increasing parental involvement, and helping referred children to attend the hospital. Conclusion: Prevalence of refractive error in children is significant in the region. Vision screening performed by trained teachers is a valid intervention for early detection of refractive error, including screening of preschool children. Program sustainability and improvements in education and quality of life resulting from childhood vision screening require further research.

PipX, the coactivator of NtcA, is a global regulator in cyanobacteria

To modulate the expression of genes involved in nitrogen assimilation, the cyanobacterial PII-interacting protein X (PipX) interacts with the global transcriptional regulator NtcA and the signal transduction protein PII, a protein found in all three domains of life as an integrator of signals of the nitrogen and carbon balance. PipX can form alternate complexes with NtcA and PII, and these interactions are stimulated and inhibited, respectively, by 2-oxoglutarate, providing a mechanistic link between PII signaling and NtcA-regulated gene expression. Here, we demonstrate that PipX is involved in a much wider interaction network. The effect of pipX alleles on transcript levels was studied by RNA sequencing of S. elongatus strains grown in the presence of either nitrate or ammonium, followed by multivariate analyses of relevant mutant/control comparisons. As a result of this process, 222 genes were classified into six coherent groups of differentially regulated genes, two of which, containing either NtcA-activated or NtcA-repressed genes, provided further insights into the function of NtcA–PipX complexes. The remaining four groups suggest the involvement of PipX in at least three NtcA-independent regulatory pathways. Our results pave the way to uncover new regulatory interactions and mechanisms in the control of gene expression in cyanobacteria.

Global behavior of the Douglas–Rachford method for a nonconvex feasibility problem

In recent times the Douglas–Rachford algorithm has been observed empirically to solve a variety of nonconvex feasibility problems including those of a combinatorial nature. For many of these problems current theory is not sufficient to explain this observed success and is mainly concerned with questions of local convergence. In this paper we analyze global behavior of the method for finding a point in the intersection of a half-space and a potentially non-convex set which is assumed to satisfy a well-quasi-ordering property or a property weaker than compactness. In particular, the special case in which the second set is finite is covered by our framework and provides a prototypical setting for combinatorial optimization problems.