984 resultados para Frequency Parameters
Resumo:
Single-frequency output power of 7.3 W at 2.09 mu m from a monolithic Ho:YAG nonplanar ring oscillator (NPRO) is demonstrated. Resonantly pumped by a Tm-doped fiber laser at 1.91 mu m, the Ho:YAG NPRO produces 71% of slope efficiency with respect to absorbed pump power and nearly diffraction-limited output with a beam quality parameter of M-2 approximate to 1.1. (c) 2008 Optical Society of America
Resumo:
The growth parameters of Otolithes ruber (Sciaenidae) were determined from both length-frequency and length-at-age data collected from Kuwait waters from 1984 to 1986. The similarity of the growth parameters is reflected in the small range of the parameters o' (=log sub(10)K+2logL) which indicates the compatibility of the two methods for this relatively short-lived species.
Resumo:
Growth and mortality parameters, exploitation rates and annual recruitment patterns were estimated from monthly length-frequency samples for Sardinella longiceps, S. fimbriata, S. Albella, Decapterus macrosoma, Dipterygonatus balteatus, Rastrelliger faughni and Encrasicolina heteroloba. These results provide the first sets of stock parameter estimates for these species off Tawi-Tawi, Philippines. The growth parameters derived were found comparable with previous estimates available for the same species from other localities. Recruitment was noted to be year-round and bimodal. Estimates of fishing mortality and exploitation rate were found to be presently above appropriate levels.
Resumo:
The growth, mortality, and recruitment pattern of Penaeus californiensis were investigated using tail length (TL)-frequency data obtained from the Gulf of Guayaquil shrimp population. Computer-based methods of tail-frequency analysis Compleat ELEFAN software were used. Results obtained gave relatively high growth and mortality estimates for both males and females. The recruitment pattern indicated two pulses annually, one significantly larger than the other.
Resumo:
Biological/fisheries parameters (L sub(oo) M, F) are presented for four fish species (Gadiculus argenteus; Gaidropsarus mediterraneous; Symphurus ligulatus; Lepidorhombus boscii) as well as body length-weight and length-height relationships for 11 and 12 fish species, respectively, estimated from trawl samples collected using three different cod-ends (stretched mesh size: 14 mm and 20 mm diamond-shaped and 20 mm square-shaped) during 1993-1994, in the western Aegean and North Euboikos Gulf, Greece. The fisheries paramaters, estimated from length-frequency using the ELEFAN approach and software, are discussed in the light of recent information on the selectivity of the presently used trawl cod-end (14 mm diamond shaped)
Resumo:
The seasonally oscillating growth parameters and length-weight relationships for Scomber japonicus caught in the Gulf of Guayaquil, Ecuador, were determined based on length-frequency data from 1989 to 1996, using the FiSAT software package of Gayanilo et al. (1996). Estimates of growth parameters are in general agreement with previous studies on the same species. Results also imply that the growth of Scomber japonicus slows down during the cold season by approximately 50% with respect to the average growth. The mean value of the power b is significantly larger than 3, indicating that the model of allometric growth should be used for the length-weight relationship and calculation of the condition factor.
Resumo:
We consider estimation of mortality rates and growth parameters from length-frequency data of a fish stock and derive the underlying length distribution of the population and the catch when there is individual variability in the von Bertalanffy growth parameter L∞. The model is flexible enough to accommodate 1) any recruitment pattern as a function of both time and length, 2) length-specific selectivity, and 3) varying fishing effort over time. The maximum likelihood method gives consistent estimates, provided the underlying distribution for individual variation in growth is correctly specified. Simulation results indicate that our method is reasonably robust to violations in the assumptions. The method is applied to tiger prawn data (Penaeus semisulcatus) to obtain estimates of natural and fishing mortality.
Resumo:
A detailed physical model of amorphous silicon (aSi:H) is incorporated into a twodimensional device simulator to examine the frequency response limits of silicon heterojunction bipolar transistors (HBT's) with aSi:H emitters. The cutoff frequency is severely limited by the transit time in the emitter space charge region, due to the low electron drift mobility in aSi:H, to 98 MHz which compares poorly with the 37 GHz obtained for a silicon homojunction bipolar transistor with the same device structure. The effects of the amorphous heteroemitter material parameters (doping, electron drift mobility, defect density and interface state density) on frequency response are then examined to find the requirements for an amorphous heteroemitter material such that the HBT has better frequency response than the equivalent homojunction bipolar transistor. We find that an electron drift mobility of at least 100 cnr'V"'"1 is required in the amorphous heteroemitter and at a heteroemitter drift mobility of 350 cm2 · V1· s1 and heteroemitter doping of 5×1017 cm3, a maximum cutoff frequency of 52 GHz can be expected. © 1996 IEEE.
Resumo:
At decadal period (10-20 years), dynamic linkage was evident between atmospheric low pressure systems over the North Pacific Ocean and circulation in a Pacific Northwest fjord (Puget Sound). As the Aleutian low pressure center shifts, storms arriving from the North Pacific Ocean deposit varying amounts of precipitation in the mountains draining into the estuarine system; in turn, the fluctuating addition of fresh water changes the density distribution near the fjord basin entrance sill, thereby constraining the fjord's vertical velocity structure. This linkage was examined using time series of 21 environmental parameters from 1899 to 1987. Covariation in the time series was evident because of the strong decadal cycles compared with long-term averages, interannual variability, and seasonal cycles.
Resumo:
Oscillation processes have been revealed in the course of reversible polarization study in ferroelectric liquid crystals. The oscillation frequency of polarization vector has been found to be from 1 to 30 kHz. The oscillation parameters were studied as functions of temperature. Temperature dependences of the oscillation amplitude and damping decrement have been measured.
Resumo:
Data on age and growth of the following species were reviewed and von Bertalanffy's growth curves were fitted: Hilsa kelee, Decapterus russellii, D. macrosoma, Rastrelliger kanagurta, Pellona ditchela, Thryssa vitrirostris and Leiognathus equulus. For the five first species, microstructures in the otoliths were used for ageing. For most species growth curves based on size-frequency distributions are also presented. The reliability of the data presented is discussed.
Resumo:
This paper proposes a Bayesian method for polyphonic music description. The method first divides an input audio signal into a series of sections called snapshots, and then estimates parameters such as fundamental frequencies and amplitudes of the notes contained in each snapshot. The parameter estimation process is based on a frequency domain modelling and Gibbs sampling. Experimental results obtained from audio signals of test note patterns are encouraging; the accuracy is better than 80% for the estimation of fundamental frequencies in terms of semitones and instrument names when the number of simultaneous notes is two.
Resumo:
A laboratory-feeding trail was conducted for 45 days with fry of common carp Cyprinus
carpio L. (0.45±0.03g) in aquaria in a static indoor fish rearing system. The fry were fed
on a pelleted diet containing 33% crude protein having fishmeal as major protein source.
The fish fry in five treatments A, B, C, D, and E, each with two replicates were fed on 5%
daily ration divided into different feeding frequencies of 2, 3, 4, 5 and 6 times a day
respectively in order to observe the growth performance. Each replicate contained 15 fry
having total initial weight of 6.87±0.31g. At the end of the feeding trial, significantly
different and higher (p<0.05) growth response was observed in treatment C having a
feeding frequencies of 4 times a day. Significantly the highest and the lowest percent
growth of 334.30 and 218.91% were observed in fish fed on the diet (Treatment C) with 4
times and (Treatment A) 2 times feeding frequencies per day, respectively. Food
conversion ratio (FCR) of 1.78 was significantly higher (p
Resumo:
Length-frequency data collected from fish landings on Lake Naivasha were used to estimate the growth parameters: total mortality (Z), growth performance index (Ø’), exploitation rate and recruitment pattern in Oreochromis leucostictus. The asymptotic length (L∞) was 38 cm and K 0.48 yr -1 Z was estimated as 3.5 yr -1, M was 0.19 yr -1, F was 2.6 yr -1 and E of 0.74. Recruitment occurs throughout the year, with a peak in January to March, while entry into the fishery occurs at a mean length of 15.9 cm. Existing restriction on the maximum number of gill nets allowed per fishing licence (10 per boat) and a minimum mesh size (10 cm) in the lake are not adhered to. Poaching using illegal mesh size nets as small as 5 cm and use of more than 10 nets per boat are common in the lake.
Resumo:
When a thin rectangular plate is restrained on the two long edges and free on the remaining edges, the equivalent stiffness of the restraining joints can be identified by the order of the natural frequencies obtained using the free response of the plate at a single location. This work presents a method to identify the equivalent stiffness of the restraining joints, being represented as simply supporting the plate but elastically restraining it in rotation. An integral transform is used to map the autospectrum of the free response from the frequency domain to the stiffness domain in order to identify the equivalent torsional stiffness of the restrained edges of the plate and also the order of natural frequencies. The kernel of the integral transform is built interpolating data from a finite element model of the plate. The method introduced in this paper can also be applied to plates or shells with different shapes and boundary conditions. © 2011 Elsevier Ltd. All rights reserved.