Quantifying the relationship between temperature regulation in the ear and floret development stage in wheat (Triticum aestivum L.) under heat and drought stress

Thermal imaging is a valuable tool for the elucidation of gas exchange dynamics between a plant and its environment. The presence of stomata in wheat glumes and awns offers an opportunity to assess photosynthetic activity of ears up to and during flowering. The knowledge of spatial and temporal thermodynamics of the wheat ear may provide insight into interactions between floret developmental stage (FDS), temperature depression (TD) and ambient environment, with potential to be used as a high-throughput screening tool for breeders. A controlled environment study was conducted using six spring wheat (Triticum aestivum L.) genotypes of the elite recombinant inbred line Seri/Babax. Average ear temperature (AET) was recorded using a hand held infrared camera and gas exchange was measured by enclosing ears in a custom built cuvette. FDS was monitored and recorded daily throughout the study. Plants were grown in pots and exposed to a combination of two temperature and two water regimes. In the examined wheat lines, TD varied from 0.1°C to 0.6°C according to the level of stress imposed. The results indicated that TD does not occur at FDS F3, the peak of active flowering, but during the preceding stages prior to pollen release and stigma maturity (F1-F2). These findings suggest that ear temperature during the early stages of anthesis, prior to pollen release and full extension of the stigma, are likely to be the most relevant for identifying heat stress tolerant genotypes.

Structure-Activity Relationship for Quaternary Ammonium Compounds Hybridized with Poly(methyl methacrylate)

Hybrid films from poly (methylmethacrylate) (PMMA) and dioctadecyldimethylammonium bromide (DODAB), cetyltrimethylammonium bromide (CTAB), or tetrapropylammonium bromide (TPAB) were characterized by determination of wettability, ellipsometry, atomic force microscopy, active compounds diffusion to water, X-ray photoelectron spectroscopy (XPS) with determination of atomic composition on the films surface, and biocidal activity against Pseudomonas aeruginosa or Staphylococcus aureus. QAC mobility in the films increased from DODAB to CTAB to TPAB. Diffusion and optimal hydrophobic hydrophilic balance imparted the highest bioactivity to CTAB. DODAB sustained immobilization at the film surface killed bacteria upon contact. TPAB ability to diffuse was useless because of its unfavorable hydrophobic hydrophilic balance for bioactivity.

Volunteering and well-being : do self-esteem, optimism, and perceived control mediate the relationship?

Volunteers play a vital role in modern societies by boosting the labor force within both the public and private sectors. While the factors that may lead people to volunteer have been investigated in a number of studies, the means by which volunteering contributes to the well-being of such volunteers is poorly understood. It has been suggested through studies that focus on the absence of depression in volunteers that self-esteem and sense of control may be major determinants of the increased well-being reported by volunteers. This is consistent with the homeostatic model of subjective well-being, which proposes that self-esteem, optimism, and perceived control act as buffers that mediate the relationship between environmental experience and subjective well-being (SWB). Using personal well-being as a more positive measure of well-being than absence of depression, this study further explored the possible mediating role of self-esteem, optimism, and perceived control in the relationship between volunteer status and well-being. Participants (N = 1,219) completed a 97-item survey as part of the Australian Unity Wellbeing project. Variables measured included personal well-being, self-esteem, optimism, and a number of personality and psychological adjustment factors. Analyses revealed that perceived control and optimism, but not self-esteem, mediated the relationship between volunteer status and personal well-being.

Female labour force participation, fertility and infant mortality in Australia : some empirical evidence from Granger causality tests

This study applies Granger causality tests within a multivariate error correction framework to examine the relationship between female participation rates, infant mortality rates and fertility rates for Australia using annual data from 1960 to 2000. Decomposition of variance and impulse response functions are also considered. The main findings are twofold. First, in the short run there is unidirectional Granger causality running from the fertility rate to female labour force participation and from the infant mortality rate to female labour force participation while there is neutrality between the fertility rate and infant mortality rate. Second, in the long run both the fertility rate and infant mortality rate Granger cause female labour participation.

Endurance training adaptations modulate the redox–force relationship of rat isolated slow-twitch skeletal muscles

1. Studies have shown that, in isolated skeletal muscles, maximum isometric force production (Po) is dependent on muscle redox state. Endurance training increases the antioxidant capacity of skeletal muscles, a factor that could impact on the force-producing capacity following exogenous exposure to an oxidant. We tested the hypothesis that 12 weeks treadmill training would increase anti-oxidant capacity in rat skeletal muscles and alter their response to exogenous oxidant exposure.

2. At the conclusion of the 12 week endurance-training programme, soleus (slow-twitch) muscles from trained rats had greater citrate synthase (CS) and catalase (CAT) activity compared with soleus muscles from untrained rats (P < 0.05).
In contrast, CAT activity of extensor digitorum longus (EDL; fast-twitch) muscles from trained rats was not different to EDL muscles of untrained rats. The CS activity was lower in EDL muscles from trained compared with untrained rats (P < 0.05).

3. Equilibration with exogenous hydrogen peroxide (H2O2, 5 mmol/L) increased the Po of soleus muscles from untrained rats for the duration of treatment (30 min), whereas the Po of EDL muscles was affected biphasically, with a small increase initially (after 5 min), followed by a more marked decrease in Po (after 30 min). The H2O2-induced increase in Po of soleus muscles from trained rats was less than that in untrained rats (P < 0.05), but no differences were observed in the Po of EDL muscles following training.

4. The results indicate that 12 weeks endurance running training conferred adaptations in soleus but not EDL muscles. These adaptations were associated with an attenuation of the oxidant-induced increase in Po of soleus muscles from trained compared with untrained rats. We conclude that endurance training-adapted soleus muscles have a slightly altered redox - force relationship.

Tensile behaviour of non-uniform fibres and fibrous composites

This work investigates the tensile behaviour of non-uniform fibres and fibrous composites. Wool fibres are used as an example of non-uniform fibres because they're physical, morphological and geometrical properties vary greatly not only between fibres but also within a fibre. The focus of this work is on the effect of both between-fibre and within-fibre diameter variations on fibre tensile behaviour. In addition, fit to the Weibull distribution by the non-brittle and non-uniform visco-elastic wool fibres is examined, and the Weibull model is developed further for non-uniform fibres with diameter variation along the fibre length. A novel model fibre composite is introduced to facilitate the investigation into the tensile behaviour of fibre-reinforced composites. This work first confirms that for processed wool, its coefficient of variation in break force can be predicted from that of minimum fibre diameters, and the prediction is better for longer fibres. This implies that even for processed wool, fibre breakage is closely associated with the occurrence of thin sections along a fibre, and damage to fibres during processing is not the main cause of fibre breakage. The effect of along-fibre diameter variation on fibre tensile behaviour of scoured wool and mohair is examined next. Only wet wool samples were examined in the past. The extensions of individual segments of single non-uniform fibres are measured at different strain levels. An important finding is the maximum extension (%) (Normally at the thinnest section) equals the average fibre extension (%) plus the diameter variation (CV %) among the fibre segments. This relationship has not been reported before. During a tensile test, it is only the average fibre extension that is measured. The third part of this work is on the applicability of Weibull distribution to the strength of non-uniform visco-elastic wool fibres. Little work has been done for wool fibres in this area, even though the Weibull model has been widely applied to many brittle fibres. An improved Weibull model incorporating within-fibre diameter variations has been developed for non-uniform fibres. This model predicts the gauge length effect more accurately than the conventional Weibull model. In studies of fibre-reinforced composites, ideal composite specimens are usually prepared and used in the experiments. Sample preparation has been a tedious process. A novel fibre reinforced composite is developed and used in this work to investigate the tensile behaviour of fibre-reinforced composites. The results obtained from the novel composite specimen are consistent with that obtained from the normal specimens.

Clegg hammer measures and human external landing forces : is there a relationship?

Ground hardness is deemed an important consideration for player safety for sports played on natural turf surfaces. Currently, a ground hardness measure is being determined using a Clegg hammer, with the suitability for play dependent on an acceptable reading. This study aimed to examine whether a relationship between Clegg hammer readings and ground reaction forces (GRF’s) generated by a human during a drop landing exist. Fifteen male community level Australian football players were recruited for the study. Participants performed a single leg drop landing on the right leg from a 45cm box onto the force plate to record GRF’s. Ten trials were conducted for three conditions: no shock pad, thin shock pad (15mm) and thick shock pad (50mm) under a synthetic turf sample. Four consecutive Clegg hammer readings were recorded following each set of ten trials. Variables of interest were maximum vertical GRF (Max vGRF), maximum rate of loading (Max RoL) and Clegg hammer (CH) readings. Pearson’s Correlation Coefficient was conducted to examine the relationship between variables and conditions. Slight to fair relationships were found between the Max vGRF and any of the four CH drops (0.181 ≤r≥ 0.189; p ≤ 0.01). This finding was similar to the relationship with Max RoL (0.209 ≤r≥ 0.217; p ≤ 0.01). When analysed for the specific shock pad condition, the relationships remained poor (r <0.1; p ≥ 0.29), with the exception of the Max RoL and the CH readings on the thick shock pad (0.1 ≤r≥ 0.2; p ≥ 0.03). The results of this study show that the ground reaction forces experienced by a human on different levels of surface hardness are significantly different to the forces on impact of the Clegg hammer. Consequently, the Clegg hammer may not be the most appropriate device for relating surface hardness to player safety, thus it is possible that the Clegg hammer alone is insufficient in globally determining ground safety.

Sharpening the focus of force field analysis

The purpose is to explore the inherent complexity of Kurt Lewin's force field theory through applied analysis of organizational case examples and related methods. The methodology applies a range of tools from the consultancy research domain, including force field analysis of complex organizational scenarios, and applies bricolage and corroboration to emerging discoveries from semi-structured interviews, author experience, critical reflection and literature survey. Findings are that linear representation of internal and external forces in organizational applications of field theory does not fully explain the paradox of inverse vectors in the forces of change. The force field is not an impermeable thing; instead, it morphs. Examples of the inverse principle and its effects are detailed and extended in this analysis. The implications of the research are that force field analysis and related change processes promoted in organizational change literature run the risk of missing key complexities. The inclusion of the inverse principle can provide enhanced, holistic understanding of the prevailing forces for change. The augmentation of the early work of Kurt Lewin, and extension of previous analyses of his legacy in the Journal of Change Management and elsewhere, provide, in this article, change analysis insights that align well with current organizational environments.

Relationship between overweight and health-related quality of life in secondary school children in Fiji: results from a cross-sectional population-based study

Objective
To investigate the relationship between excess weight (overweight and obesity) and health-related quality of life (HRQoL) in a sample of secondary school children in Fiji, by gender, age and ethnicity.

Methods
The study comprised 8947 children from forms 3–6 (age 12–18 years) in 18 secondary schools on Viti Levu, the main island of Fiji. Body mass index (BMI) was calculated from measured height and weight, and weight status was classified according to the International Obesity Task Force recommendations. HRQoL was measured by the self-report version of the Pediatric Quality of Life Inventory 4.0.

Results
HRQoL was similar in children with obesity and normal weight. Generally, this was replicated when analyzed separately by gender and ethnicity, but age stratification revealed disparities. In 12–14-year-old children, obesity was associated with better HRQoL, owing to better social and school functioning and well-being, and in 15–18-year olds with poorer HRQoL, owing to worse physical, emotional and social functioning and well-being (Cohen’s d 0.2–0.3). Children with a BMI in the overweight range also reported a slightly lower HRQoL than children with a BMI in the normal weight range, but although statistically significant, the size of this difference was trivial (Cohen’s d <0.2).

Discussion
The results suggest that, overall there is no meaningful negative association between excess weight and HRQoL in secondary school children in Fiji. This is in contradiction to the negative relationship between excess weight and HRQoL shown in studies from other countries and cultures. The assumption that a large body size is associated with a lower quality of life cannot be held universally. Although a generally low HRQoL among children in Fiji may be masking or overriding the potential effect of excess weight on HRQoL, socio-economic and/or socio-cultural factors, may help to explain these relationships.

Relationship of upper-limb and thoracic muscle strength to 6-min walk distance in COPD patients

Study objectives: This study was developed to investigate the influence of thoracic and upperlimb muscle function on 6-min walk distance (6MWD) in patients with COPD.Design: A prospective, cross-sectional study.Setting: the pulmonary rehabilitation center of a university hospital.Patients: Thirty-eight patients with mild to very severe COPD were evaluated.Measurements and results: Pulmonary function and baseline dyspnea index (BDI) were assessed, handgrip strength, maximal inspiratory pressure (Pimax), and 6MWD were measured, and the one-repetition maximum (1RM) was determined for each of four exercises (bench press, lat pull down, leg extension, and leg press) performed on gymnasium equipment. Quality of life was assessed using the St. George Respiratory Questionnaire (SGRQ). We found statistically significant positive correlations between 6MWD and body weight (r = 0.32; p < 0.05), BDI (r = 0.50; p < 0.01), FEV, (r = 0.33; p < 0.05), PImax (r = 0.53; p < 0.01), and all values of 1RM. A statistically significant negative correlation was observed between 6MWD and dyspnea at the end of the 6-min walk test (r = -0.29; p < 0.05), as well as between 6MWD and the SGRQ activity domain (r = -0.45; p < 0.01) and impact domain (r = -0.34; p < 0.05) and total score (r = -0.40; p < 0.01). Multiple regression analysis selected body weight, BDI, Pimax, and lat pull down IRM as predictive factors for 6MWD (R-2 = 0.589).Conclusions: the results of this study showed the importance of the skeletal musculature of the thorax and upper limbs in submaximal exercise tolerance and could open new perspectives for training programs designed to improve functional activity in COPD patients.

Evaluation of postural balance in postmenopausal women and its relationship with bone mineral density- a cross sectional study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Different Retention Systems on a Distal Extension Removable Partial Denture Associated With an Osseointegrated Implant

The aim of this study was to evaluate the biomechanical behavior of a mandibular distal extension removable partial denture (DERPD) associated with an implant and different retention system, by bidimensional finite element method. Five hemimandible models with a canine and external hexagon implant at second molar region associated with DERPD were simulated: model A, hemimandible with a canine and a DERPD; model B, hemimandible with a canine and implant with a healing abutment associated to a DERPD; model C, hemimandible with a canine and implant with an ERA attachment associated to a DERPD; model D, hemimandible with a canine and implant with an O'ring attachment associated to a DERPD; and model E, hemimandible with a canine and implant-supported prosthesis associated to a DERPD. Cusp tips were loaded with 50 N of axial or oblique force (45 degrees). Finite element analysis was performed in ANSYS 9.0. model E showed the higher displacement and overload in the supporting tissues; the patterns of stress distribution around the dental apex of models B, C, and D were similar. The association between a DERPD and an osseointegrated implant using the ERA or O'ring systems shows lower stress values. Oblique forces showed higher stress values and displacement. Oblique forces increased the displacement and stress levels in all models; model C displayed the best stress distribution in the supporting structures; healing abutment, ERA, and O'ring systems were viable with RPD, but DERPD association with a single implant-supported prosthesis was nonviable.

Relationship between DIAGNOdent values and sealant penetration depth on occlusal fissures

The aim of this in vitro study was to evaluate the relationship between laser fluorescence values and sealant penetration depth on occlusal fissures. One hundred and sixty-six permanent molars were selected and divided into four groups, which were each treated using a different sealant (two clear and two opaque). The teeth were independently measured twice by two experienced dentists using two laser fluorescence devices-DIAGNOdent (LF and LFpen)-before and after sealing, and then thermoclycled. After measuring, the teeth were histologically prepared and assessed for caries extension. Digital photographs of the cut sealed sites were assessed, and the sealant penetration depth was measured. All 166 sites were measured by one of the examiners taking as limits the outer and inner surface of the sealant into the fissure. For each device (LF and LFpen) and each group, the difference between the values at baseline and after sealing was plotted against the sealant penetration depth and scatter plots were provided. It could be observed that most of the points were concentrated around the zero line, for both LF and LFpen in the four groups. In conclusion, there is no relation between changes in DIAGNOdent values and increasing of depth sealant penetration within the occlusal fissures.

Relationship between grain-boundary capacitance and bulk shallow donors in SnO2 polycrystalline semiconductor

The relationship between grain-boundary capacitance and extrinsic shallow donors caused by Nb addition to SnO2 center dot COO binary polycrystalline system has been investigated by means of combined techniques such as I-V characteristic response, complex impedance and capacitance analysis and electrostatic force microscopy. The estimated role of the Nb doping is to increase the concentration of shallow donors that are capable of enhancing the electronic donation to grain-boundary acceptors. This effect leads to the formation of potential barriers at grain boundaries with a simultaneous increase of grain-boundary capacitance and non-Ohmic features of the polycrystalline device doped with Nb atoms.