Mass distribution of the human body using biostereometrics. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Electric power supply and distribution.

Cover title.

Storage distribution, and dispensing of aircraft and automotive fuels.

"June 1970."

Gas distribution.

"December 1990."

Operator, organizational, DS, GS, and depot maintenance manual : monitor assemblies, control-sensing OK-33/FYA-10(V) and OK-38/FYA-10(V)T1 and switching unit distribution SA-1537/FYA-10(V).

"October 1968."

Three-component force measurements on a large scramjet in a shock tunnel

A stress-wave force balance for measurement of thrust, lift, and pitching moment on a large scramjet model (40 kg in mass, 1.165 in in length) in a reflected shock tunnel has been designed, calibrated, and tested. Transient finite element analysis was used to model the performance of the balance. This modeling indicates that good decoupling of signals and low sensitivity of the balance to the distribution of. the load can be achieved with a three-bar balance. The balance was constructed and calibrated by applying a series of point loads to the model. A good comparison between finite element analysis and experimental results was obtained with finite element analysis aiding in the interpretation of some experimental results. Force measurements were made in a shock tunnel both with and without fuel injection, and measurements were compared with predictions using simple models of the scramjet and combustion. Results indicate that the balance is capable of resolving lift, thrust, and pitching moments with and without combustion. However vibrations associated with tunnel operation interfered with the signals indicating the importance of vibration isolation for accurate measurements.

Rotary atomizer drop size distribution database

Wind tunnel measurements of drop Size distributions from Micronair A U4000 and A U5000 rotary atomizers were collected to develop a database for model use. The measurements varied tank mix, flow rate, air speed, and blade angle conditions, which were correlated by multiple regressions (average R-2 = 0.995 for A U4000 and 0.988 for AU5000). This database replaces an outdated set of rotary atomizer data measured in the 1980s by the USDA Forest Service and fills in a gap in data measured in the 1990s by the Spray Drift Task Force. Since current USDA Forest Service spray projects rely on rotary atomizers, the creation of the database (and its multiple regression interpolation) satisfies a need seen for ten years.

Force sensing for measuring human body movement

The research developed in this thesis explores the sensing and inference of human movement in a dynamic way, as opposed to conventional measurement systems, that are only concerned with discrete evaluations of stimuli in sequential time. Typically, conventional approaches are used to infer the dynamic movement of the body; such as vision and motion tracking devices, with either a human diagnosis or complex image processing algorithm to classify the movement. This research is therefore the first of its kind to attempt and provide a movement classifying algorithm through the use of minimal sensing points, with the application for this novel system, to classify human movement during a golf swing. There are two main categories of force sensing. Firstly, array-type systems consisting of many sensing elements, and are the most commonly researched and commercially available. Secondly, reduced force sensing element systems (RFSES) also known as distributive systems have only been recently exploited in the academic world. The fundamental difference between these systems is that array systems handle the data captured from each sensor as unique outputs and suffer the effects of resolution. The effect of resolution, is the error in the load position measurement between sensing elements, as the output is quantized in terms of position. This can be compared to a reduced sensor element system that maximises that data received through the coupling of data from a distribution of sensing points to describe the output in discrete time. Also this can be extended to a coupling of transients in the time domain to describe an activity or dynamic movement. It is the RFSES that is to be examined and exploited in the commercial sector due to its advantages over array-based approaches such as reduced design, computational complexity and cost.

FemtoNewton force sensing with optically trapped nanotubes

We extract the distribution of both center-of-mass and angular fluctuations from three-dimensional tracking of optically trapped nanotubes. We measure the optical force and torque constants from autocorrelation and cross-correlation of the tracking signals. This allows us to isolate the angular Brownian motion. We demonstrate that nanotubes enable nanometer spatial and femtonewton force resolution in photonic force microscopy, the smallest to date. This has wide implications in nanotechnology, biotechnology, nanofluidics, and material science.

The use of atomic force microscopy in investigating particle caking mechanisms

Spray-dried materials are being used increasingly in industries such as food, detergent and pharmaceutical manufacture. Spray-dried sodium carbonate is an important product that has a great propensity to cake; its moisture-sorption properties are very different to the crystalline and amorphous species, with a great affinity for atmospheric moisture. This work demonstrates how the noncontact surface analysis of individual particles using atomic force microscopy can highlight the possible mechanisms of unwanted agglomeration. The nondestructive nature of this method allows cycling of localised humidity in situ and repeated scanning of the same particle area. The resulting topography and phase scans showed that humidity cycling caused changes in the distribution of material phases that were not solely dependent on topographical changes. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hydrological drivers of wetland vegetation community distribution within Everglades National Park, Florida

The influence of hydrological dynamics on vegetation distribution and the structuring of wetland environments is of growing interest as wetlands are modified by human action and the increasing threat from climate change. Hydrological properties have long been considered a driving force in structuring wetland communities. We link hydrological dynamics with vegetation distribution across Everglades National Park (ENP) using two publicly available datasets to study the probability structure of the frequency, duration, and depth of inundation events along with their relationship to vegetation distribution. This study is among the first to show hydrologic structuring of vegetation communities at wide spatial and temporal scales, as results indicate that the percentage of time a location is inundated and its mean depth are the principal structuring variables to which individual communities respond. For example, sawgrass, the most abundant vegetation type within the ENP, is found across a wide range of time inundated percentages and mean depths. Meanwhile, other communities like pine savanna or red mangrove scrub are more restricted in their distribution and found disproportionately at particular depths and inundations. These results, along with the probabilistic structure of hydropatterns, potentially allow for the evaluation of climate change impacts on wetland vegetation community structure and distribution.

Linking labour force participation, education, labour wages and household consumption in developing countries:push and pull effects in self-employment - evidence from Nigeria

The contribution of this thesis is in understanding the origins in developing countries of differences in labour wage and household consumption vis-à-vis educational abilities (and by extension employment statuses). This thesis adds to the labour market literature in developing countries by investigating the nature of employment and its consequences for labour wage and household consumption in a developing country. It utilizes multinomial probit, blinder-oaxaca, Heckman and quantile regressions to examine one human capital indicator: educational attainment; and two welfare proxies: labour wage and household consumption, in a developing country, Nigeria. It finds that, empirically, the self-employed are a heterogeneous group of individuals made up of a few highly educated individuals, and a significant majority of ‘not so educated’ individuals who mostly earn less than paid workers. It also finds that a significant number of employers enjoy labour wage premiums; and having a higher proportion of employers in the household has a positive relationship with household consumption. The thesis furthermore discovers an upper educational threshold for women employers not found for men. Interestingly, the thesis also finds that there is indeed an ordering of labour wages into low-income self-employment (which seems to be found mainly in “own account” self-employment), medium-income paid employment, and high-income self-employment (which seems to be found mainly among employers), and that this corresponds to a similar ordering of low human capital, medium human capital and high human capital among labour market participants, as expressed through educational attainments. These show that as a whole, employers can largely be classed as experiencing pulled self-employment, as they appear to be advantaged in all three criteria (educational attainments, labour wage and household consumption). A minority of self-employed “own account” workers (specifically those at the upper end of the income distribution who are well educated), can also be classed as experiencing pulled self-employment. The rest of the significant majority of self-employed “own account” workers in this study can be classed as experiencing pushed self-employment in terms of the indicators used.

La distribution ‘juste’ de la signature savante dans les collaborations de recherche multidisciplinaire en sciences de la santé

L’auteur qui appose son nom à une publication universitaire sera reconnu pour sa contribution à la recherche et devra également en assumer la responsabilité. Il existe divers types d’agencements pouvant être utilisés afin de nommer les auteurs et souligner l’ampleur de leur contribution à ladite recherche. Par exemple, les auteurs peuvent être nommés en ordre décroissant selon l’importance de leurs contributions, ce qui permet d’allouer davantage de mérite et de responsabilité aux premiers auteurs (à l’instar des sciences de la santé) ou bien les individus peuvent être nommés en ordre alphabétique, donnant une reconnaissance égale à tous (tel qu’on le note dans certains domaines des sciences sociales). On observe aussi des pratiques émergeant de certaines disciplines ou des champs de recherche (tel que la notion d’auteur correspondant, ou directeur de recherche nommé à la fin de la liste d’auteurs). En science de la santé, lorsque la recherche est de nature multidisciplinaire, il existe différentes normes et pratiques concernant la distribution et l’ordre de la signature savante, ce qui peut donner lieu à des désaccords, voire à des conflits au sein des équipes de recherche. Même si les chercheurs s’entendent pour dire que la signature savante devrait être distribué de façon ‘juste’, il n’y a pas de consensus sur ce que l’on qualifie de ‘juste’ dans le contexte des équipes de recherche multidisciplinaire. Dans cette thèse, nous proposons un cadre éthique pour la distribution juste de la signature savante dans les équipes multidisciplinaires en sciences de la santé. Nous présentons une critique de la documentation sur la distribution de la signature savante en recherche. Nous analysons les enjeux qui peuvent entraver ou compliquer une distribution juste de la signature savante tels que les déséquilibres de pouvoir, les conflits d’intérêts et la diversité de cultures disciplinaires. Nous constatons que les normes internationales sont trop vagues; par conséquent, elles n’aident pas les chercheurs à gérer la complexité des enjeux concernant la distribution de la signature savante. Cette limitation devient particulièrement importante en santé mondiale lorsque les chercheurs provenant de pays développés collaborent avec des chercheurs provenant de pays en voie de développement. Afin de créer un cadre conceptuel flexible en mesure de s’adapter à la diversité des types de recherche multidisciplinaire, nous proposons une approche influencée par le Contractualisme de T.M. Scanlon. Cette approche utilise le respect mutuel et la force normative de la raison comme fondation, afin de justifier l’application de principes éthiques. Nous avons ainsi développé quatre principes pour la distribution juste de la signature savante en recherche: le mérite, la juste reconnaissance, la transparence et la collégialité. Enfin, nous proposons un processus qui intègre une taxonomie basée sur la contribution, afin de délimiter les rôles de chacun dans le projet de recherche. Les contributions peuvent alors être mieux comparées et évaluées pour déterminer l’ordre de la signature savante dans les équipes de recherche multidisciplinaire en science de la santé.

Piezo force microscopy and peakforce tuna measurements of III-V semiconductor nanowires

GaN, InP and GaAs nanowires were investigated for piezoelectric response. Nanowires and structures based on them can find wide applications in areas purposes such as nanogenarators, nanodrives, Solar cells and other perspective areas. Experemental measurements were carried out on AFM Bruker multimode 8 and data was handled with Nanoscope software. AFM techniques permitted not only to visualize the surface topography, but also to show distribution of piezoresponse and allowed to calculate its properties. The calculated values are in the same range as published by other authors.