Leaders in Local : Exploring Consumers‘ Purchase Intentions of Locally Produced Foods

* Local foods are growing in importance in the mind set of the consumer – “the new organic” (McKenzie-Minifie, 2007) * Consumers are becoming more active in choosing alternative channels to purchase locally grown/produced foods Growth of farmer’s markets, roadside stalls, community gardens and *CSA programs * Supermarkets and grocers continue to tailor their assortments to include, ethnic, organic, natural and local foods to meet changing consumer needs * Australian research is limited, although one early study has found ‘buying locally produced foods’ was considered an important attribute (Lea & Worsley, 2007) * International research has tended to focus on COO effects, rather than region or local effects. (Insch & Florek, 2009) *Emerging research is beginning to explore consumer interest in ‘local’ over simply ‘domestic’ – although not specifically in food. (Hustvedt, Carroll & Bernard, 2013) * One study has examined differences in attitudes, subjective norms and intentions toward the purchase of locally produced foods. (Campbell, 2013)

Solar Assisted Fast Pyrolysis: A Novel Approach of Renewable Energy Production

Biofuel produced by fast pyrolysis from biomass is a promising candidate. The heart of the system is a reactor which is directly or indirectly heated to approximately 500°C by exhaust gases from a combustor that burns pyrolysis gas and some of the by-product char. In most of the cases, external biomass heater is used as heating source of the system while internal electrical heating is recently implemented as source of reactor heating. However, this heating system causes biomass or other conventional forms of fuel consumption to produce renewable energy and contributes to environmental pollution. In order to overcome these, the feasibility of incorporating solar energy with fast pyrolysis has been investigated. The main advantages of solar reactor heating include renewable source of energy, comparatively simpler devices, and no environmental pollution. A lab scale pyrolysis setup has been examined along with 1.2 m diameter parabolic reflector concentrator that provides hot exhaust gas up to 162°C. The study shows that about 32.4% carbon dioxide (CO2) emissions and almost one-third portion of fuel cost are reduced by incorporating solar heating system. Successful implementation of this proposed solar assisted pyrolysis would open a prospective window of renewable energy.

Liking for high fat foods in patients with Obstructive Sleep Apnoea

Excess weight and obesity are factors that are strongly associated with risk for Obstructive Sleep Apnoea (OSA).Weight loss has been associated with improvements in clinical indicators of OSA severity; however, patients’ beliefs about diet change have not been investigated. This study utilized a validated behaviour change model to estimate the relationship between food liking, food intake and indices of OSA severity. Two-hundred and six OSA patients recruited from a Sleep Disorders Clinic completed standardized questionnaires of: a) fat and fibre food intake, food liking, and food knowledge and; b) attitudes and intentions towards fat reduction. OSA severity and body mass index (BMI) were objectively measured using standard clinical guidelines. The relationship between liking for high fat food and OSA severity was tested with hierarchical regression. Gender and BMI explained a significant 20% of the variance in OSA severity, Fibre Liking accounted for an additional 6% (a negative relationship), and Fat Liking accounted for a further 3.6% of variance. Although the majority of individuals (47%) were currently “active” in reducing fat intake, overall the patients’ dietary beliefs and behaviours did not correspond. The independent relationship between OSA severity and liking for high fat foods (and disliking of high fibre foods) may be consistent with a two-way interaction between sleep disruption and food choice. Whilst the majority of OSA patients were intentionally active in changing to a healthy diet, further emphasis on improving healthy eating practices and beliefs in this population is necessary.

The suitability of DEAE-Cl active groups on customized poly(GMA-co-EDMA) continuous stationary phase for fast enzyme-free isolation of plasmid DNA

The creation of a commercially viable and a large-scale purification process for plasmid DNA (pDNA) production requires a whole-systems continuous or semi-continuous purification strategy employing optimised stationary adsorption phase(s) without the use of expensive and toxic chemicals, avian/bovine-derived enzymes and several built-in unit processes, thus affecting overall plasmid recovery, processing time and economics. Continuous stationary phases are known to offer fast separation due to their large pore diameter making large molecule pDNA easily accessible with limited mass transfer resistance even at high flow rates. A monolithic stationary sorbent was synthesised via free radical liquid porogenic polymerisation of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with surface and pore characteristics tailored specifically for plasmid binding, retention and elution. The polymer was functionalised with an amine active group for anion-exchange purification of pDNA from cleared lysate obtained from E. coli DH5α-pUC19 pellets in RNase/protease-free process. Characterization of the resin showed a unique porous material with 70% of the pores sizes above 300 nm. The final product isolated from anion-exchange purification in only 5 min was pure and homogenous supercoiled pDNA with no gDNA, RNA and protein contamination as confirmed with DNA electrophoresis, restriction analysis and SDS page. The resin showed a maximum binding capacity of 15.2 mg/mL and this capacity persisted after several applications of the resin. This technique is cGMP compatible and commercially viable for rapid isolation of pDNA.

Moving forwards with the aim of going backwards fast : high performance rowing as a learning environment

Background and Purpose: - This paper focuses on the learning culture within the high performance levels of rowing. In doing so, we explore the case of an individual’s learning as he moves across athletic, coaching and administrative functions. This exploration draws on a cultural learning framework and complementary theorisings related to reflexivity. Method - This study makes use of an intellectually, morally and collaboratively challenging approach whereby one member of the research team was also the sole participant of this study. The participant’s careers as a high performance athlete, coach and administrator, coupled with his experience in conducting empirical research presented a rare opportunity to engage in collaborative research (involving degrees of insider and outsider status for each of the research team). We acknowledge that others have looked to combine roles of coach / athlete / administrator with that of researcher however few (if any) have attempted to combine them all in one project. Moreover, coupled with the approach to reflexivity adopted in this study and the authorship contributions we consider this scholarly direction uncommon. Data were comprised of recorded research conversations, a subsequently constructed learning narrative, reflections on the narrative, a stimulated reflective piece from the participant, and a final (re)construction of the participant’s story. Accordingly, data were integrated through an iterative process of thematic analysis. Results - The cultural (i.e., the ways things get done) and structural (e.g., the rules and regulations) properties of high performance rowing were found to shape both the opportunities to be present (e.g., secure a place in the crew) and to learn (e.g., learn the skills required to perform at an Olympic level). However, the individual’s personal properties were brought to bear on re-shaping the constraints such that many limitations could be overcome. In keeping with the theory of learning cultures, the culture of rowing was found to position individuals (a coxswain in this case) differentially. In a similar manner, a range of structural features was found to be important in shaping the cultural and personal elements in performance contexts. For example, the ‘field of play’ was found to be important as a structural feature (i.e., inability of coach to communicate with athletes) in shaping the cultural and personal elements of learning in competition (e.g., positioning the coxswain as an in-boat coach and trusted crewmate). Finally, the cultural and structural elements in rowing appeared to be activated by the participant’s personal elements, most notably his orientation towards quality performance. Conclusion - The participant in this study was found to be driven by the project that he cares about most and at each turn he has bent his understanding of his sport back on itself to see if he can find opportunities to learn and subsequently explore ways to improve performance. The story here emphasises the importance of learner agency, and this is an aspect that has often been missing in recent theorising about learning. In this study, we find an agent using his ‘personal emergent powers to activate the resources in the culture and structure of his sport in an attempt to improve performance. We conclude from this account that this particular high performance rowing culture is one that provided support but nonetheless encouraged those involved, to ‘figure things out’ for themselves – be it as athletes, coaches and/or administrators.

Enhanced preference for high-fat foods following a simulated night shift

Objectives Shift workers are prone to obesity and associated co-morbidities such as diabetes and cardiovascular disease. Sleep restriction associated with shift work results in dramatic endocrine and metabolic effects that predispose shift workers to these adverse health consequences. While sleep restriction has been associated with increased caloric intake, food preference may also play a key role in weight gain associated with shift work. This study examined the impact of an overnight simulated night shift on food preference. Methods Sixteen participants [mean 20.1, standard deviation (SD) 1.4 years; 8 women] underwent a simulated night shift and control condition in a counterbalanced order. On the following morning, participants were provided an opportunity for breakfast that included high- and low-fat food options (mean 64.8% and 6.4% fat, respectively). Results Participants ate significantly more high-fat breakfast items after the simulated night shift than after the control condition [167.3, standard error of the mean (SEM 28.7) g versus 211.4 (SEM 35.6) g; P=0.012]. The preference for high-fat food was apparent among the majority of individuals following the simulated night shift (81%), but not for the control condition (31%). Shift work and control conditions did not differ, however, in the total amount of food or calories consumed. Conclusions A simulated night shift leads to preference for high-fat food during a subsequent breakfast opportunity. These results suggest that food choice may contribute to weight-related chronic health problems commonly seen among night shift workers.

A fast semi-implicit difference method for a nonlinear two-sided space-fractional diffusion equation with variable diffusivity coefficients

In this paper, we derive a new nonlinear two-sided space-fractional diffusion equation with variable coefficients from the fractional Fick’s law. A semi-implicit difference method (SIDM) for this equation is proposed. The stability and convergence of the SIDM are discussed. For the implementation, we develop a fast accurate iterative method for the SIDM by decomposing the dense coefficient matrix into a combination of Toeplitz-like matrices. This fast iterative method significantly reduces the storage requirement of O(n2)O(n2) and computational cost of O(n3)O(n3) down to n and O(nlogn)O(nlogn), where n is the number of grid points. The method retains the same accuracy as the underlying SIDM solved with Gaussian elimination. Finally, some numerical results are shown to verify the accuracy and efficiency of the new method.

Fast and accurate business process drift detection

Business processes are prone to continuous and unexpected changes. Process workers may start executing a process differently in order to adjust to changes in workload, season, guidelines or regulations for example. Early detection of business process changes based on their event logs – also known as business process drift detection – enables analysts to identify and act upon changes that may otherwise affect process performance. Previous methods for business process drift detection are based on an exploration of a potentially large feature space and in some cases they require users to manually identify the specific features that characterize the drift. Depending on the explored feature set, these methods may miss certain types of changes. This paper proposes a fully automated and statistically grounded method for detecting process drift. The core idea is to perform statistical tests over the distributions of runs observed in two consecutive time windows. By adaptively sizing the window, the method strikes a trade-off between classification accuracy and drift detection delay. A validation on synthetic and real-life logs shows that the method accurately detects typical change patterns and scales up to the extent it is applicable for online drift detection.

Fast unscented transformation-based transient stability margin estimation incorporating uncertainty of wind generation

Intermittent generation from wind farms leads to fluctuating power system operating conditions pushing the stability margin to its limits. The traditional way of determining the worst case generation dispatch for a system with several semi-scheduled wind generators yields a conservative solution. This paper proposes a fast estimation of the transient stability margin (TSM) incorporating the uncertainty of wind generation. First, the Kalman filter (KF) is used to provide linear estimation of system angle and then unscented transformation (UT) is used to estimate the distribution of the TSM. The proposed method is compared with the traditional Monte Carlo (MC) method and the effectiveness of the proposed approach is verified using Single Machine Infinite Bus (SMIB) and IEEE 14 generator Australian dynamic system. This method will aid grid operators to perform fast online calculations to estimate TSM distribution of a power system with high levels of intermittent wind generation.