Programa computacional com interface gráfica para identificação estocástica de parâmetros modais de estruturas civis: aplicação em pontes e torres de linha de transmissão

O interesse no comportamento dinâmico de estruturas metálicas vem crescendo nas últimas décadas no Brasil, em decorrência de acidentes com colapso total de algumas estruturas devido às vibrações ambientes em diversas regiões do país. Na região amazônica, por exemplo, onde esse tipo de estrutura deve vencer obstáculos como florestas e rios de grande largura, casos de colapso total de estruturas metálicas também são relatados. O foco principal dessa dissertação é o estudo do comportamento modal de estruturas metálicas submetidas às vibrações ambientes cuja magnitude das forças de excitação é desconhecida. Dois estudos de caso são apresentados: no primeiro deles, o comportamento modal de uma torre de linha de transmissão de energia elétrica é investigado; e no segundo caso, tanto o comportamento modal como os níveis de desconforto de uma ponte são estudados. Os estudos realizados neste último caso visam avaliar os níveis de desconforto da ponte quando submetida às excitações ambientes como rajadas de vento e o tráfego de veículo de acordo a norma brasileira NBR 8800 (1986). Em ambos os estudos de caso foram realizadas análises experimentais e computacionais. Na etapa experimental, ambas as estruturas foram monitoradas com emprego de um conjunto de acelerômetros de baixa freqüência e também de um sistema de aquisição apropriados para ensaios de vibração de estruturas civis. Como é muito difícil medir a magnitude das forças de excitação ambientes, foram utilizados os métodos de identificação estocásticos SSI-DATA e SSI-COV para extração de parâmetros modais de estruturas civis a partir somente dos dados de resposta coletados nos ensaios de vibração. Entre as atividades desenvolvidas nessa etapa, destaca-se a criação de um programa computacional com recursos do Graphical User Interface (GUI) da plataforma Matlab®, destinado à identificação modal de estruturas civis com o emprego dos referidos métodos estocásticos. Esse programa é constituído de três módulos: o primeiro é destinado ao processamento e tratamento dos sinais coletados nos ensaios de vibração; o segundo é utilizado para adicionar as informações do posicionamento dos acelerômetros utilizados nos arquivos dos sinais de resposta; e o terceiro e último módulo é destinado à identificação a partir dos arquivos de dados de resposta processados nos dois primeiros módulos. Na etapa das análises teóricas, foram criados modelos numéricos utilizando o método dos elementos finitos para simular o comportamento dinâmico das estruturas analisadas. Comparando os resultados obtidos em ambas as etapas de análise, verifica-se que resultados experimentais e teóricos apresentaram parâmetros bastante próximos entre si nos primeiros modos de vibração. Os resultados experimentais mostraram que ambos os métodos estocásticos foram muito eficientes na identificação das estruturas ensaiadas.

FBG optimization using spline encoded evolution strategy

ABSTRACT: This paper presents an encoding scheme adapted for Fiber Bragg Grating (FBG) optimization using metaheuristics. The proposed encoding scheme uses spline approximations in order to build softened refractive index profiles from few encoded parameters. This approach is suitable for Fiber Bragg Grating (FBG) synthesis because it ensures both the reduction of the problem dimensionality and the respect of important restrictions associated to the FBG manufacture. Simulations are shown where an ES using the spline encoding was able to converge faster and produce more interesting filters, when compared with conventional encoding schemes.

Diversão, rivalidade e política: o Re x Pa nos festivais futebolísticos em Belém do Pará (1905- 1950)

Estudar futebol nos proporciona compreender os embates e as construções culturais entre os diferentes sujeitos na sociedade. Dessa forma, o presente trabalho tem por objetivo analisar esse mundo no seu processo de passagem de um esporte mais aristocrático para a sua popularização através dos festivais futebolísticos na cidade de Belém do Pará durante os anos de 1905 a 1950. Festivais que foram muito mais do que diversão, pois, englobam uma série de segmentos sociais com sentimentos, paixões, lutas políticas que através dos seus interesses entram em conflitos que muitas vezes podem ser percebidos nos jogos suburbanos, nas suas respectivas festas e nos jogos entre Remo e Paysandú.

Análise numérica de seções reforçadas de concreto armado considerando o estado inicial de tensões

O presente trabalho trata da formulação e da implementação computacional, em MATLAB^®, para a análise numérica de seções reforçadas de concreto armado, submetidas à flexão composta, considerando o estado de tensões anterior ao reforço. A referida análise se dá com a geração de diagramas de interação momento fletor esforço normal por dois métodos, quais sejam: a) varredura dos domínios de deformação da NBR6118/2003; b) determinação dos picos de diagramas momento fletor – esforço normal – curvatura. Em ambos os procedimentos utiliza-se o método numérico do ponto médio na integração do cálculo dos esforços resistentes, e o método de Newton Raphson para a obtenção de raízes é usado na determinação da deformação no eixo de referência da seção, durante a determinação dos diagramas momento fletor -esforço normal - curvatura. Preliminarmente, concluiu-se que a primeira das duas metodologias aplicadas é inviável. Posteriormente, com a confirmação da eficácia da segunda metodologia, foi possível expandir o escopo do trabalho de modo a permitir a análise de seções de formatos quaisquer executadas em várias etapas, considerando o estado de tensões inicial em cada uma das etapas. A implementação computacional referente a este trabalho se baseou no programa para análise numérica de seções SECLAB, desenvolvido pelo professor Remo Magalhães de Souza.

Caracterização biomecânica da conduta motora remada básica de passeio do esporte stand up paddle

Pós-graduação em Engenharia Mecânica - FEG

Realidade misturada: conceitos, ferramentas e aplicações

The Mixed Reality proposes scenes combining between virtual and real worlds offering to the user an intuitive way of interaction according to a specific application. This tutorial paper aims at presenting the fundamentals concepts of this emergent kind of human-computer interface.

Dispositivos não convencionais para o rastreamento do corpo humano

Due to the popularity and need to learn sign language, there are tools that help in this type of communication. In Brazil, for example, the government offers professional Sign Language to assist communities, however, if think the hypothesis that people live in places difficult access, there is a difficult in movement of professionals to such places, besides bringing government overspending. Thus, a tool that simulates the movements of professional, fully exploiting the technological resources (cost-benefit) to enrich and provide a tool for communities, it becomes possible order to fill this gap. The system provides resources for editing movements, and these, later, are retrieved by tool for the visualization and representation of signals in a Virtual Environment. The resources used, provide two unconventional devices for tracking body, the Wiimote controllers and P5 glove.

Teacher-learning process based on an immersive and interactive environment

This paper explores the benefits of using immersive and interactive multiprojection environments (CAVE) to visualize molecules, and how it improves users’ understanding. We have proposed and implemented a tool for teachers to manipulate molecules and another to edit molecules and assist students at home. The contribution of the present research project are these tool that allows investigating structures, properties and dynamics of a molecular system which are extremely complex and comprises millions of atoms. The experience is enriched through multimedia information associated with parts of the model; for example, videos and text can be linked to specific molecule, demonstrating some detail. This solution is based on a teaching-learning process.

Coastal and shelf circulation in the vicinity of Camamu Bay (14 degrees S), Eastern Brazilian Shelf

The Camamu Bay (CMB) is located on the narrowest shelf along the South American coastline and close to the formation of two major Western Boundary Currents (WBC), the Brazil/North Brazil Current (BC/NBC). These WBC flow close to the shelf break/slope region and are expected to interact with the shelf currents due to the narrowness of the shelf. The shelf circulation is investigated in terms of current variability based on an original data set covering the 2002-2003 austral summer and the 2003 austral autumn. The Results show that the currents at the shelf are mainly wind driven, experiencing a complete reversal between seasons due to a similar change in the wind field. Currents at the inner-shelf have a polarized nature, with the alongshore velocity mostly driven by forcings at the sub-inertial frequency band and the cross-shore velocity mainly supra-inertially forced, with the tidal currents playing an important role at this direction. The contribution of the forcing mechanisms at the mid-shelf changes between seasons. During the summer, forcings in the two frequency bands are important to drive the currents with a similar contribution of the tidal currents. On the other hand, during the autumn season, the alongshore velocity is mostly driven by sub-inertial forcings and tidally driven currents still remain important in both directions. Moreover, during the autumn when the stratification is weaker, the response of the shelf currents to the wind forcing presents a barotropic signature. The meso-scale processes related to the WBC flowing at the shelf/slope region also affect the circulation within the shelf, which contribute to cause significant current reversals during the autumn season. Currents at the shelf-estuary connection are clearly supra-inertially forced with the tidal currents playing a key role in the generation of the along-channel velocities. The sub-inertial forcings at this location act mainly to drive the weak ebb currents which were highly correlated with both local and remote wind forcing during the summer season. (C) 2010 Elsevier Ltd. All rights reserved.

Examination of the performance of different pointwise linear regression progression criteria to detect glaucomatous visual field change

Background: We aimed to investigate the performance of five different trend analysis criteria for the detection of glaucomatous progression and to determine the most frequently and rapidly progressing locations of the visual field. Design: Retrospective cohort. Participants or Samples: Treated glaucoma patients with =8 Swedish Interactive Thresholding Algorithm (SITA)-standard 24-2 visual field tests. Methods: Progression was determined using trend analysis. Five different criteria were used: (A) =1 significantly progressing point; (B) =2 significantly progressing points; (C) =2 progressing points located in the same hemifield; (D) at least two adjacent progressing points located in the same hemifield; (E) =2 progressing points in the same Garway-Heath map sector. Main Outcome Measures: Number of progressing eyes and false-positive results. Results: We included 587 patients. The number of eyes reaching a progression endpoint using each criterion was: A = 300 (51%); B = 212 (36%); C = 194 (33%); D = 170 (29%); and E = 186 (31%) (P = 0.03). The numbers of eyes with positive slopes were: A = 13 (4.3%); B = 3 (1.4%); C = 3 (1.5%); D = 2 (1.1%); and E = 3 (1.6%) (P = 0.06). The global slopes for progressing eyes were more negative in Groups B, C and D than in Group A (P = 0.004). The visual field locations that progressed more often were those in the nasal field adjacent to the horizontal midline. Conclusions: Pointwise linear regression criteria that take into account the retinal nerve fibre layer anatomy enhances the specificity of trend analysis for the detection glaucomatous visual field progression.

The influence of large-scale circulation, transient and local processes on the seasonal circulation of the Eastern Brazilian Shelf, 13 degrees S

The circulation at the Eastern Brazilian Shelf (EBS), near 13 degrees S, is discussed in terms of the currents and hydrography, associating large-scale circulation, transient and local processes to establish a regional picture of the EBS circulation. The results show that the circulation within the continental shelf and slope region is strongly affected by the seasonal changes in the wind field and mesa/large-scale circulation. Transient processes associated to the passage of Cold Front systems or meso-scale activity and the presence of a local canyon add more complexity to the system. During the austral spring and summer seasons, the prevailing upwelling favorable winds blowing from E-NE were responsible for driving southwestward shelf currents. The interaction with the Western Boundary Current (the Brazil Current), especially during summer, was significant and a considerable vertical shear in the velocity field was observed at the outer shelf. The passage of a Cold Front system during the springtime caused a complete reversal of the mean flow and contributed to the deepening of the Mixed Layer Depth (MLD). In addition, the presence of Salvador Canyon, subject to an upwelling favorable boundary current, enhanced the upwelling system, when compared to the upwelling observed at the adjacent shelf. During the austral autumn and winter seasons the prevailing downwelling favorable winds blowing from the SE acted to total reverse the shelf circulation, resulting in a northeastward flow. The passage of a strong Cold Front, during the autumn season, contributed not only to the strengthening of the flow but also to the deepening of the MLD. The presence of the Salvador Canyon, when subject to a downwelling favorable boundary current, caused an intensification of the downwelling process. Interestingly, the alongshore velocity at the shelf region adjacent to the head of the canyon was less affected when compared to the upwelling situation.

RAND-like Appropriateness Methodology Consensus for Primary Open-Angle Glaucoma in Latin America

PURPOSE: To report the results of a Latin American consensus panel regarding the diagnosis and management of primary open-angle glaucoma and to compare these results with those from a similar panel in the United States. DESIGN: A RAND-like (Research and Development) appropriateness methodology was used to assess glaucoma practice in Latin America. METHODS: The 148 polling statements created for the RAND-like analysis in the United States and 10 additional statements specific to glaucoma care in Latin America were presented to a panel of Latin American glaucoma experts. Panelists were polled in private using the RAND-like methodology before and after the panel meeting. RESULTS: Consensus agreement or disagreement among Latin American experts was reached for 51.3% of statements before the meeting and increased to 66.5% in the private, anonymous meeting after polling (79.0% agreement, 21.0% disagreement). Although there was a high degree of concordance (111 of 148 statements; 75%) between the results of this Latin American panel and the United States panel, there were some notable exceptions relating to diagnostic and therapeutic decision making. CONCLUSIONS: This RAND-like consensus methodology provides a perspective of how Latin American glaucoma practitioners view many aspects of glaucoma and compares these results with those obtained using a similar methodology from practitioners in the United States. These findings may be helpful to ophthalmologists providing glaucoma care in Latin America and in other regions of the world. (Am J Ophthalmol 2012;154: 460-465. (C) 2012 by Elsevier Inc. All rights reserved.)

Impianti per la generazione distribuita di biometano e per l'immissione nelle reti di distribuzione del gas naturale.

Studio dell'avvento di nuove realtà produttive energetiche da fonti rinnovabili nel settore del gas naturale. Il settore analizzato risulta quello relativo all'allacciamento di impianti di produzione di biometano alla rete del gas naturale. La finalità è la valutazione degli effetti della generazione distribuita di biometano nel futuro sistema del gas naturale (Smart Grid Gas) in termini di progettazione e conduzione del sistema nel suo complesso.