Environmental analysis of residential building facades through energy consumption, GHG emissions and costs

This paper provides some results on the potential to minimize environmental impacts in residential buildings life cycle, through façade design strategies, analyzing also their impact on costs from a lifecycle perspective. On one hand, it assesses the environmental damage produced by the materials of the building envelope, and on the other, the benefits they offer in terms of habitability and liveability in the use phase. The analysis includes several design parameters used both for rehabilitation of existing facades, as for new facades, trying to cover various determinants and proposing project alternatives. With this study we intended to contribute to address the energy challenges for the coming years, trying also to propose pathways for innovative solutions for the building envelope.

Influence of loudspeaker directivity on the measurement uncertainty

One of the most significant aspects of a building’s acoustic behavior is the airborne sound insulation of the room façades, since this determines the protection of its inhabitants against environmental noise. For this reason, authorities in most countries have established in their acoustic regulations for buildings the minimum value of sound insulation that must be respected for façades. In order to verify compliance with legal requirements it is usual to perform acoustic measurements in the finished buildings and then compare the measurement results with the established limits. Since there is always a certain measurement uncertainty, this uncertainty must be calculated and taken into account in order to ensure compliance with specifications. The most commonly used method for measuring sound insulation on façades is the so-called Global Loudspeaker Method, specified in ISO 140-5:1998. This method uses a loudspeaker placed outside the building as a sound source. The loudspeaker directivity has a significant influence on the measurement results, and these results may change noticeably by choosing different loudspeakers, even though they all fulfill the directivity requirements of ISO 140-5. This work analyzes the influence of the loudspeaker directivity on the results of façade sound insulation measurement, and determines its contribution to measurement uncertainty. The theoretical analysis is experimentally validated by means of an intermediate precision test according to ISO 5725-3:1994, which compares the values of sound insulation obtained for a façade using various loudspeakers with different directivities

An experimental study on the effect of rolling shutters on the field measurements of airborne sound insulation of façades

The façade is the visible part of a building, and generally consists of various different constructive systems. The sound reduction index of the closing elements for the openings on a room’s façade is a determining factor in the sound insulation from airborne noise inside the space. Windows are the transparent part of the façade, and to improve their thermal behaviour and control solar radiation, they are often fitted with a series of external and internal protections such as shutters, slats and blinds. This work contains a summary of studies carried out using field measurements of airborne sound insulation on façades in rooms, in application of the standard UNE-EN ISO 140-5:1999. In all the rooms the windows were fitted with shutter boxes and rolling shutters, and the acoustic tests were made with the shutter in two positions (extended and fully retracted). The results were analysed considering the window opening system (openable or sliding) and the type of glass pane (monolithic or insulating glass unit, IGU). In the case of sliding windows, the airborne sound insulation of façades is greater when the shutter is extended than when it is retracted, and this should be taken into account when applying the aforementioned standard.

Seismic vulnerability analysis of wide-beam buildings in Spain

A number of short-to-mid height RC buildings with wide beams have been constructed in moderate-seismicity areas of Spain. The seismic behavior in the direction of the wide beams appears to be deficient because of low lateral strength, low ductility of the wide beams, big strut compressive forces inside the column-beam connections, and unreliable contribution of the spandrel zones of the wide beams. In the orthogonal direction, the behavior is worse since only the joists and the façade beams contribute to the lateral resistance. The objective is to assess the seismic capability of these structures; further research will involve proposing retrofit strategies. The research approach consists of selecting a number of representative buildings and evaluating their vulnerability by code-type, push-over and dynamic analyses. The cooperation of the masonry infill walls is accounted for. The main conclusion is that the seismic behavior of these buildings is inadequate in most of the situations.

Procedimiento para la medición y verificación de la directividad y la cobertura de una fuente sobre un elemento de fachada de acuerdo a la norma ISO 140-5

El apartado <4.2 Altavoz> de la Norma Internacional UNE-EN ISO 140-5 [1] especifica que la directividad del altavoz usado en el ensayo debe asegurar en todas las bandas de frecuencias de interés, unas diferencias de nivel locales inferiores a 5dB (o a 10 dB para fachadas de dimensiones mayores a 5m), medidas en campo libre, sobre una superficie del mismo tamaño y orientación que la pared o elemento a ensayar. Este requisito debe verificarse en unas bandas de frecuencia de interés que sean como mínimo los tercios de octava desde 100Hz hasta 3150Hz, y preferiblemente desde 50Hz hasta 5kHz. Desde hace unos años, en el Laboratorio de sonido de la EUIT de Telecomunicación de la Universidad Politécnica de Madrid, los autores han implementado un método en el que, a partir de las medidas de directividad en cámara anecoica de la fuente sonora a ensayar, se calcula el campo sonoro directo sobre una superficie ficticia que representa un elemento de fachada en la misma disposición que se indica en la norma ICO 140-5 y con unas dimensiones según se requieran en el procedimiento. También se estima la dimensión horizontal máxima ΔXmax de una fachada rectangular en relación de aspecto fija que permite verificar la norma con los criterios de 5dB y 10dB de diferencias máximas de niveles directos en dicha fachada. En esta ponencia se detalla el procedimiento anterior. ABSTRACT. The Section "4.2 loudspeaker" of the UNE-EN ISO 140-5 International Standard: "Field measurements of airborne sound insulation of façade elements and façades", specifies that the directivity of the loudspeaker used in the test must ensure in all frequency bands of interest, local level differences less than 5dB (or 10dB for façade dimensions greater than 5m), measured in free field over an area of the same size and orientation as the wall or element to be tested. This requirement must be verified in the frequency bands of interest which are, at least, the third octave bands from 100Hz to 3150Hz, preferably from 50Hz to 5kHz. In recent years, in the Laboratory of Sound of the EUIT Telecomunicación (Universidad Politécnica de Madrid), the authors have implemented a method that, from directivity measurements of loudspeakers performed in the anechoic room, the direct sound field on a surface in the same layout as indicated in the ISO standard is calculated. It is also estimated the maximum horizontal dimension Δxmax of a rectangular façade for each aspect ratio which verify the standard criteria of either 5dB or 10dB for the maximum differences of direct levels in the façade. This paper details the procedure above introduced.

Influence of loudspeaker directivity on the measurement uncertainty of the acoustic testing of facades.

One of the most significant aspects of a building?s acoustic behavior is the airborne sound insulation of the room façades, since this determines the protection of its inhabitants against environmental noise. For this reason, authorities in most countries have established in their acoustic regulations for buildings the minimum value of sound insulation that must be respected for façades. In order to verify compliance with legal requirements it is usual to perform acoustic measurements in the finished buildings and then compare the measurement results with the established limits. Since there is always a certain measurement uncertainty, this uncertainty must be calculated and taken into account in order to ensure compliance with specifications. The most commonly used method for measuring sound insulation on façades is the so-called Global Loudspeaker Method, specified in ISO 140-5:1998. This method uses a loudspeaker placed outside the building as a sound source. The loudspeaker directivity has a significant influence on the measurement results, and these results may change noticeably by choosing different loudspeakers, even though they all fulfill the directivity requirements of ISO 140-5. This work analyzes the influence of the loudspeaker directivity on the results of façade sound insulation measurement, and determines its contribution to measurement uncertainty. The theoretical analysis is experimentally validated by means of an intermediate precision test according to ISO 5725-3:1994, which compares the values of sound insulation obtained for a façade using various loudspeakers with different directivities. Keywords: Uncertainty, Façade, Insulation

Desarrollo y caracterización de un material celular de alta porosidad con base cementicia activada mediante agentes inorgánicos

Esta tesis ha estudiado los morteros celulares, centrándose en la experimentación con pastas de cemento aireadas (PCA) con polvo de aluminio como agente expansor. El objetivo es el desarrollo de un material cementicio con una baja conductividad térmica que sirva como aislamiento térmico. La naturaleza inorgánica del material lo hace incombustible, en contraste con las espumas poliméricas existentes en el mercado, cuya aplicación en cámaras ventiladas ha sido prohibida por normativas de construcción tanto a nivel nacional como internacional. Las posibles aplicaciones son con proyección neumática o en paneles prefabricados. Se han ensayado dos series de pastas de cemento con polvo de aluminio: - Serie WPC/CAC/CH. Mezcla de referencia con cemento blanco (WPC), cemento de aluminato cálcico (CAC) y cal aérea (CH) en proporción 5:1:4. - Serie OPC/CH. Mezcla de referencia con cemento portland con cenizas volantes (OPC) y cal aérea (CH) en proporción OPC/CH de 4:1 A las mezclas de referencia se le han añadido adiciones de metacaolín (MK) (10 y 20%) o sepiolita (SP) (1 y 2%) para observar el efecto que producen tanto en el mortero fresco como en el mortero endurecido. Se ha estudiado la reología de las pastas en estado fresco, analizando el proceso de expansión de las pastas, registrando los valores de tensión de fluencia, aire ocluido y temperatura durante la expansión. Con los valores obtenidos se ha discutido la influencia de las adiciones utilizadas en la cinética de corrosión del polvo de aluminio que genera la expansión, concluyendo que las adiciones puzolánicas (CV y MK) y la SP reducen mucho el periodo de inducción, lo que provoca poros más grandes y mayor cantidad de aire ocluido. Asimismo se ha analizado la relación entre la tensión de fluencia y el contenido de aire ocluido, deduciendo que a mayor tensión de fluencia en el momento de iniciarse la expansión, menor tamaño de poros y contenido de aire ocluido. Finalmente, se han obtenido las densidades y capacidades de retención de agua de los morteros frescos. Para caracterizar la red porosa de las pastas aireadas endurecidas, se obtuvieron tanto las densidades reales, netas, aparentes y relativas como las porosidades abiertas, cerradas y totales con ensayos hídricos. Finalmente se obtuvieron imágenes de los poros con tomografía axial computerizada para obtener las porosimetrías de las muestras. La caracterización de la red porosa ha servido para terminar de analizar lo observado en la evolución de la expansión del mortero fresco. Se ha analizado la influencia de la red porosa en la conductividad térmica, obtenida con caja caliente, comparándola con la existente en la literatura existente tanto de morteros celulares como de espumas poliméricas. Se concluye que los valores de conductividad térmica conseguida están en el mínimo posible para un material celular de base cementicia. La microestructura se ha estudiado con microscopía electrónica de barrido, difracción de rayos X y ensayos térmicos TG/ATD, observando que los productos de hidratación encontrados coinciden con los que se producen en morteros sin airear. Las imágenes SEM y los resultados de ultrasonidos han servido para analizar la presencia de microfisuras de retracción en las pastas aireadas, observando que en las muestras con adiciones de MK y SP, se reduce la presencia de microfisuras. ABSTRACT This thesis has studied cellular mortars, focusing in testing aerated cement pastes with aluminum powder as expansive agent. The purpose is the development of a cementitious material with low thermal conductivity that can be used as thermal isolation. Inorganic nature of this material makes it non-combustible, in contrast with polymeric foams in market, whose application in ventilated double skin façade systems has been banned by building standards, both domestically and internationally. Possible uses for this material are pneumatically sprayed applications and precast panels. Two series of batches with aluminum powder have been tested: - WPC/CAC/CH series. Reference paste with white portland cement (WPC), calcium aluminate cement (CAC) and lime (CH) with 5:1:4 ratio. - OPC/CH series. Reference paste with portland cement with fly ash (OPC) and lime (CH) with 4:1 ratio. Metakaolin (MK) (10 and 20%) or sepiolite (SP) (1 and 2%) additions were used in reference pastes to characterize the effect in fresh and hardened mortar. Rheology in fresh pastes was studied, expansion process of pastes was analyzed, recording yield stress, entrained air and temperature values during expansion. Recorded values were used to discuss influence of additions on reaction kinetics of aluminum powder corrosion, that produces expansion.. Conclusion is that pozzolanic additions (FA and MK) and SP greatly reduce induction period, producing bigger pores and more entrained air. Relation between yield stress and entrained air has been also analyzed, observing that the bigger yield stress at beginning of expansion, the smaller pores size and the lower entrained air values. Finally density and water retention of fresh mortars were obtained. Pore network in hardened aerated cement pastes was characterized by imbibition methods providing true, bulk and relative density, and providing also open, closed and total porosity. Finally, pore system imaging were obtained with computerized axial tomography to study porosimetry of specimens. Pore network characterization was useful to complete facts analysis observed in expansion of fresh mortars. Influence of pore network in thermal conductivity, checked in hot box, was analyzed comparing with those existing values in cellular mortar and polymeric foams researches. It was concluded that thermal conductivity values achieved are close to minimum possible in a cementitious cellular material. Microstructure was studied with Scanning Electron Microscopy, X-Ray Diffractometry and TG-DTA analysis, observing that hydration phases found, are those produced in non aerated mortar. SEM imaging and ultrasound results were useful to analyze shrinkage microcracks in aerated cement pastes, concluding that microcrack presence in specimens with MK and SP additions were reduced.

Procedure for verification of sound source coverage over façades according to the International Standard ISO 140-5

This paper presents a new verification procedure for sound source coverage according to ISO 140?5 requirements. The ISO 140?5 standard applies to the measurement of façade insulation and requires a sound source able to achieve a sufficiently uniform sound field in free field conditions on the façade under study. The proposed method involves the electroacoustic characterisation of the sound source in laboratory free field conditions (anechoic room) and the subsequent prediction by computer simulation of the sound free field radiated on a rectangular surface equal in size to the façade being measured. The loudspeaker is characterised in an anechoic room under laboratory controlled conditions, carefully measuring directivity, and then a computer model is designed to calculate the acoustic free field coverage for different loudspeaker positions and façade sizes. For each sound source position, the method provides the maximum direct acoustic level differences on a façade specimen and therefore determines whether the loudspeaker verifies the maximum allowed level difference of 5 dB (or 10 dB for façade dimensions greater than 5 m) required by the ISO standard. Additionally, the maximum horizontal dimension of the façade meeting the standard is calculated and provided for each sound source position, both with the 5 dB and 10 dB criteria. In the last section of the paper, the proposed procedure is compared with another method used by the authors in the past to achieve the same purpose: in situ outdoor measurements attempting to recreate free field conditions. From this comparison, it is concluded that the proposed method is able to reproduce the actual measurements with high accuracy, for example, the ground reflection effect, at least at low frequencies, which is difficult to avoid in the outdoor measurement method, and it is fully eliminated with the proposed method to achieve the free field requisite.

Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5

The International Standard ISO 140-5 on field measurements of airborne sound insulation of façades establishes that the directivity of the measurement loudspeaker should be such that the variation in the local direct sound pressure level (ΔSPL) on the sample is ΔSPL < 5 dB (or ΔSPL < 10 dB for large façades). This condition is usually not very easy to accomplish nor is it easy to verify whether the loudspeaker produces such a uniform level. Direct sound pressure levels on the ISO standard façade essentially depend on the distance and directivity of the loudspeaker used. This paper presents a comprehensive analysis of the test geometry for measuring sound insulation and explains how the loudspeaker directivity, combined with distance, affects the acoustic level distribution on the façade. The first sections of the paper are focused on analysing the measurement geometry and its influence on the direct acoustic level variations on the façade. The most favourable and least favourable positions to minimise these direct acoustic level differences are found, and the angles covered by the façade in the reference system of the loudspeaker are also determined. Then, the maximum dimensions of the façade that meet the conditions of the ISO 140-5 standard are obtained for the ideal omnidirectional sound source and the piston radiating in an infinite baffle, which is chosen as the typical radiation pattern for loudspeakers. Finally, a complete study of the behaviour of different loudspeaker radiation models (such as those usually utilised in the ISO 140-5 measurements) is performed, comparing their radiation maps on the façade for searching their maximum dimensions and the most appropriate radiation configurations.

Vulnerability analysis of RC buildings with wide beams located in moderate seismicity regions

A significant number of short-to-mid height RC buildings with wide beams have been constructed in areas of moderate seismicity of Spain, mainly for housing and administrative use. The buildings have a framed structure with one-way slabs; the wide beams constitute the distinctive characteristic, their depth being equal to that of the rest of the slab, thus providing a flat lower surface, convenient for construction and the layout of facilities. Seismic behavior in the direction of the wide beams appears to be deficient because of: (i) low lateral strength, mainly because of the small effective depth of the beams, (ii) inherent low ductility of the wide beams, generated by high amount of reinforcement, (iii) the big strut compressive forces developed inside the column-beam connections due to the low height of the beams, and (iv) the fact that the wide beams are wider than the columns, meaning that the contribution of the outer zones to the resistance of the beam-column joints is unreliable because there is no torsion reinforcement. In the orthogonal direction, the behavior is worse since the only members of the slabs that contribute to the lateral resistance are the joists and the façade beams. Moreover, these buildings were designed with codes that did not include ductility requirements and required only a low lateral resistance; indeed, in many cases, seismic action was not considered at all. Consequently, the seismic capacity of these structures is not reliable. The objective of this research is to assess numerically this capability, whereas further research will aim to propose retrofit strategies. The research approach consists of: (i) selecting a number of 3-story and 6-story buildings that represent the vast majority of the existing ones and (ii) evaluating their vulnerability through three types of analyses, namely: code-type, push-over and nonlinear dynamic analysis. Given the low lateral resistance of the main frames, the cooperation of the masonry infill walls is accounted for; for each representative building, three wall densities are considered. The results of the analyses show that the buildings in question exhibit inadequate seismic behavior in most of the examined situations. In general, the relative performance is less deficient for Target Drift CP (Collapse Prevention) than for IO (Immediate Occupancy). Since these buildings are selected to be representative of the vast majority of buildings with wide beams that were constructed in Spain without accounting for any seismic consideration, our conclusions can be extrapolated to a broader scenario.

‘State-of-the-art’ of building integrated photovoltaic products

During the last decades, the photovoltaic (PV) modules and their associated architectural materials are increasingly being incorporated into the construction of the building envelope such as façade, roof and skylights in the urban centers. This paper analyzes the-state-of-the-art of the PV elements and construction materials which are advertised as BIPV-products at the most important companies in the world. For this purpose 136 companies and 445 PV elements have been investigated and analyzed from a technical and architectural point of view. Also, the study has been divided into two main groups according to industry which producing the product: BIPV-Modules, which comes from the PV modules manufacturers and consist of standard PV-modules with some variations in its aesthetic features, support or dimensions; and PV-Constructions Elements, which consist of conventional constructive elements with architectural features intentionally manufactured for photovoltaic integration. In advance for conclusions, the solar tile is the most common PV-constructions element, the Si-crystalline is the most widely used PV technology, and the BIPV-urban furniture is the fastest growing market experienced in recent years. However, it is clear the absences of innovative elements which meet at the same time both the constructive purpose as the quality standards of PV technology.

Material, espacio y color en Mies van der Rohe. Café Samt & Seide: Hacia una Propuesta Estructural

La aparición de varias fotografías del Café Samt & Seide no publicadas hasta 2008 en las que se observaba la luz natural de la exposición; los planos a escala de la nave donde se realizó la exposición textil; y los croquis inéditos de la instalación de la seda localizados durante el transcurso de la Tesis Doctoral por el doctorando en el plano de la Sala de Cristal, han sido las principales aportaciones de la búsqueda documental que ha tenido por objeto el conocimiento espacial e interpretación gráfica del proyecto expositivo realizada durante el transcurso de la Tesis Doctoral para poder profundizar en el alcance de la propuesta protoarquitectónica y, a través de ella, en la obra y pensamiento de Mies van der Rohe. Material, espacio y color son elementos propuestos como capítulos que estructuran la disertación y que son empleados por Mies van der Rohe como factores de una nueva expresión espacial en la exposiciones como ensayos identificados con su idea de arquitectura. En el Café Samt & Seide, Mies van der Rohe y Lilly Reich proponen una sensibilidad en el empleo del material y color trasladada al espacio mediante una atmósfera rítmica y en movimiento de superficies abstraídas e iluminadas. La estructura visual de opuestos nace del doble material textil de la exposición desplegándose en un orden espacial y constructivo de elementos independientes iniciado en los apartamentos de la Colonia Weissenhof y Sala de Cristal de Stuttgart 1926-1927, y que será trasladado desde los espacios experimentales de 1927 a las series de mármoles y cristales del Pabellón Alemán 1928-1929. La síntesis intelectual (arte-ciencia-filosofía) guía el proceso de formalización y la técnica en una intención que será trasladada a su arquitectura en el empleo de la tecnología. La creatividad y repercusión de las vanguardias en la instalación muestra la voluntad integradora de la exposición y arquitectura como arte total. Los aspectos interpretativos de las artes plásticas, visuales y musicales se integran como criterios y sensibilidades aplicadas a las estructuras yuxtapuestas material, espacial y de color. Modernidad y tradición tectónica convergen en este espacio construido cuyas superficies cubren un armazón metálico oculto. La construcción mínima textil será incorporada como idea de forma en la futura construcción del pilar metálico, la pared flotante de sus viviendas y pabellones abiertos a la naturaleza, y la gran fachada tecnológica del espacio público de sus agrupaciones en la ciudad. El espacio total del Café Samt & Seide dentro de la gran nave de Berlín anticipa las exposiciones artísticas e industriales realizadas junto a Lilly Reich en el interior de las espaciosas salas de estructura metálica como instalaciones conceptuales de gravedad y luz antecedentes de los pabellones de grandes dimensiones y espacio universal. Arquitectura, construcción y lugar son integrados en la instalación por el principio estructural como propuesta de una idea de arquitectura que es desarrollada en las exposiciones. Oscilador y bastidor son construcciones escaladas dentro de la gran nave iluminada, expresando el conjunto un orden de partes que reflejan un todo integrado en la naturaleza y lo universal. Las múltiples relaciones espaciales, constructivas y conceptuales de la exposición con su arquitectura desvelan al Café Samt & Seide como un exponente y antecedente de su obra e idea a la que definió como una propuesta estructural. La estructura, entendida como un conjunto de valores culturales y medios técnicos, es el concepto con el que Mies van der Rohe identifica la síntesis intelectualtecnológica de su tiempo, constituyendo la finalidad de su expresión material, espacial y de color. ABSTRACT The unpublished pictures of the Café Samt & Seide appeared in 2008 in which the natural light in the exhibition can be seen; the scaled plan of the nave where the textile exhibition was held; and the unpublished sketches of the silk exhibition located by the doctoral candidate while preparing his dissertation have been the main input of the data search aiming at a better understanding of the space and a graphic interpretation of the exhibition project made by the doctoral candidate during the dissertation as a basic requirement to deepen in the scope of this protoarchitectural proposal and, though it, into Mies van der Rohe’s work and thinking. Material, space and colour are the elements put forward as the chapters structuring this dissertation and were used by Mies van der Rohe as factors of a new spatial expression in expositions as tests identified with his idea of architecture. In Café Samt & Seide, Mies van der Rohe and Lilly Reich present material and colour sensitivity transferred to space though a rhythmic and moving atmosphere made up by abstracted and lit surfaces. Such a visual grammar and oppositions unfolds into a space and constructive order of independent elements originated with the apartments of the Weissenhof Colony and Glass Room in Stuttgart 1926-1927, and which were transferred these test spaces 1927 to the series of marble and glass in the German Pavilion 1928-1929. The intellectual and formal will (art-science-philosophy) guides the technical expression, which is transferred to architecture through technology. The creativity and impact of avant-gardes in the installation reflects exhibition and architecture’s will to integrate as a Total Art. The interpretative aspects of plastic, visual and musical arts are part of a sensitivity applied to the overlapped structures of material, space and colour. Tectonic modernity and tradition converge in this space built with surfaces covering a hidden metal framework. The minimal textile construction is integrated as a shape idea in his subsequent construction of the metal pillar, floating wall in his housing and pavilions open to nature, and the great technological façade of the public space of his urban clusters. The total space of the exhibition inside the great nave in Berlin anticipates the artistic and industrial exhibitions done together with Lilly Reich inside the spacious Halls built with exposed metal structures as conceptual installation of gravity and light prior to the big-dimensioned pavilions and universal space. Architecture, construction and place are integrated by the structural principle. Oscillator and framework are scaled constructions integrated inside the great, lit nave, and the whole conveys order of its parts reflecting a whole integrated in nature and the universal. The many conceptual, space and constructive link of the textile exhibition to his European and American architecture add a greater knowledge of the time when Mies van der Rohe stated he gained a “new awareness” 1926, revealing Café Samt & Seide as a valuable example and the experimental precursor of his work and idea defined by himself as a “structural proposal”. The structure, understood as a set of cultural and material values expressed by architecture, is the notion used by Mies van der Rohe to identify the intellectual-technological synthesis as the idea of a time and which is the goal of its material, space and colour expression.

Pietilä: El proyecto de Dipoli

Dipoli es un edificio plurifuncional localizado en el campus de Otaniemi que acoge los servicios generales del alumnado. Tanto encargo como propiedad pertenecía, hasta 2013, a la Asociación de Estudiantes de Helsinki University of Technology TKK (actualmente conocida como Aalto University), cuando se vendió y traspasó a la propia universidad. La tesis estudia este proyecto (1961-66) como uno de los ejemplos más significativos de la obra de los arquitectos Reima (1923-93)y Raili Pietilä (1926-), quienes se unieron tanto personal como profesionalmente el mismo año de la convocatoria del concurso (1961). Debido a la dificultad del encargo por la dimensión y flexibilidad de los espacios requeridos, el primer premio quedó desierto puesto que ninguna propuesta cumplía con todos los requisitos establecidos. El jurado otorgó el segundo premio a su proyecto junto con Osmo Lappo y solicitó posteriormente a ambos un desarrollo más profundo del mismo. Finalmente optaron por construir el edificio planteado por los Pietilä. En él debía desarrollarse un amplio abanico de actividades sociales como reuniones, entretenimiento nocturno, actuaciones, proyecciones de películas, cenas y bailes, así como servir de comedor durante los meses de invierno y espacio destinado a congresos en la época estival. Además, en dicho edificio se pretendía acoger el Sindicato de Estudiantes de la Universidad Tecnológica de Helsinki y se localizaría en el nuevo campus de Otaniemi a escasos kilómetros de la capital, donde Alvar Aalto ya estaba diseñando varios equipamientos universitarios siguiendo el planeamiento general que proyectó en el concurso de 1949. El elemento más característico de este proyecto es la cubierta, una estructura continua formada a partir de un caparazón hueco de hormigón in situ capaz de absorber dos lenguajes diferentes y generar, bajo ella, un espacio singular con multitud de posibilidades funcionales. Su geometría permite dividir el programa en estancias de menor tamaño sin perder ni la identidad ni unidad formal. La manera en que se iluminan los espacios bajo ella se consigue de formas diferentes: si bien la volumetría de líneas cartesianas presenta un sistema de aperturas longitudinales por donde penetra la luz cenital, en la forma más libre aparecen un conjunto de lucernarios de diferente tamaños y posiciones aparentemente aleatorias que introducen la luz natural por el plano del techo de forma más controlada, apoyada por la disposición de las ventanas perimetrales. El juego de espesores de la cubierta ofrece un conjunto de matices que pretenden resolver los tres condicionantes principales del proyecto, la adecuación de los usos en su interior, la compatibilidad de circulaciones de los usuarios y la inserción en el lugar. La percepción de este plano horizontal atraviesa lecturas múltiples, desde su uso primario de cubrición y cuya distancia con el plano del suelo se comprime para tensionar la grieta de luz al tiempo que ofrece nuevas relaciones con el paisaje hasta convertirse en fachada al apoyarse en el suelo y crear un límite físico entre interior y exterior. El objetivo fundamental de la tesis es entender mejor la traza particular de Dipoli desde una visión rigurosa que amplíe el conocimiento del edificio y al mismo tiempo explique el espacio propuesto a través de las diferentes herramientas de proyecto. Para ello se ha elaborado una documentación de la obra que parte de recopilar, seleccionar y redibujar la información existente desde el estado previo a la construcción del objeto terminado. El sentido de volver al Centro de Estudiantes de Otaniemi, supone, además de ayudar a comprender el trabajo de sus autores, entender el proceso de la historia de la arquitectura finlandesa y detectar relaciones con otras obras más lejanas con las que pudiese compartir ciertos valores, facilitando un entendimiento más global de la historia. Esta investigación se inicia desde la hipótesis que la forma final del edificio y su relación con el lugar, para proponer un tipo de arquitectura que confía en la observación sensible del programa, del uso, de las escalas de los espacios, del movimiento de las personas y su relación y anclaje con el lugar. Y en este sentido, el trabajo se desarrolla guiado por estos aspectos que se manifiestan también desde la influencia y comprensión de otros trabajos propios y ajenos. Para detectar las claves de proyecto que les han permitido la construcción espacial y formal de su arquitectura, entendiendo éstas como el conjunto de herramientas y mecanismos que reflexionan sobre una particular composición volumétrica y espacios dinámicos que ofrecen un aspecto exterior expresivo, la tesis se articula sobre dos capítulos principales “Contextos” y “Proyecto y Construcción” donde se quiere estudiar el proyecto en su forma más completa. Esta pareja de apartados aborda la descripción del marco temporal, físico, cultural, personal y profesional de los arquitectos, el análisis y síntesis de la propuesta y, por último, la repercusión del proyecto. Contextos pretende ubicar la obra además de facilitar la comprensión del conjunto de aspectos y condicionantes que determinaron la materialización de Dipoli. Este capítulo se subdivide a su vez en cinco apartados: Contexto Histórico, Físico y Cultural, Personal, Profesional e Incidencia de Dipoli. El Contexto histórico se centra en la descripción pormenorizada del conjunto de situaciones que influyen en el arquitecto cuando se toman decisiones durante el proceso de proyectar. El objetivo es definir los condicionantes que pueden haber afectado directa o indirectamente la obra. El capítulo comienza subrayando los temas de interés comunes para el resto de sus homólogos finlandeses. Principalmente se centra en la década de 1950 como etapa previa a la gestación de Dipoli. También atiende el proceso de evolución de la arquitectura finlandesa desde finales del S.XIX unido a la crisis de identidad nacional que el maestro Alvar Aalto superará por sus obras pero también por su personalidad y supondrá una gran sombra al resto de sus compañeros en el marco nacional e internacional provocando una reacción contraria a sus proyectos y persona entre el resto de arquitectos. Por este motivo, al tiempo que se gestaba el proyecto de Dipoli emergieron un grupo de profesionales que defendían fuertemente las trazas cartesianas del racionalismo como Aulis Blomstedt o Juhani Pallasmaa y que consiguieron abrir una nueva perspectiva intelectual. Por tanto será inevitable que la presencia del maestro nórdico Alvar Aalto aparezca a lo largo de toda la tesis, permitiéndonos un mejor entendimiento de la carga orgánica y humana de sus trabajos desde la perspectiva de los Pietilä. Posteriormente este capítulo desgrana aquellos intereses que dominaban el marco arquitectónico internacional y que pudieron influir en las soluciones planteadas. Dipoli será puesto en relación a diversas arquitecturas contemporáneas que presentan un enfoque diferente al esbozado por el Movimiento Moderno y cuyo marco de referencias guarda algún tipo de relación con los mismos temas de proyecto. Es el caso del grupo Team 10 o determinados ejemplos de arquitectos alemanes como Hugo Häring y Hans Scharoun, incluso puntos en común con el sistema constructivista del vanguardismo soviético. Estas relaciones con otras arquitecturas matizan su carácter singular e incluso se revisa en qué medida esta propuesta amplifica los aspectos que comparten. En cuanto al Contexto físico y cultural, una primera aproximación al ámbito donde el edificio se sitúa nos revela las características generales de un lugar claramente diferente a la ubicación del resto de edificios del campus. A continuación se adentra en el origen del nuevo centro universitario desde el planeamiento urbanístico de Alvar Aalto y revela tanto la forma de disponer las construcciones como las propuestas que el maestro había desarrollado con anterioridad a la convocatoria del concurso. Además aquí se destacan aquellos aspectos que propiciaron la elección del solar. Prosigue adentrándose en el programa propuesto por el jurado –entre cuyos miembros se encontraba el propio Aalto- y el análisis de las propuestas presentadas por cada uno de los arquitectos que obtuvieron una mención. Por último, se estudian y definen las obras más relevantes localizadas en el entorno físico del proyecto y que existían con anterioridad, destacando principalmente el trabajo de los Siren (Heikki y Kaija) y Alvar Aalto por los motivos desarrollados en el punto anterior. Prosigue con el Contexto Personal donde se seleccionan de datos biográficos que expliquen, en parte, las circunstancias personales que perfilaron su manera de entender la arquitectura y que consecuentemente influyeron en su camino intelectual hasta llegar a Dipoli. A continuación se indaga en la relación profesional y personal con Raili Paatelainen para establecer en qué medida participaron ambos en la propuesta. Este apartado concluye con el estudio de la etapa docente que profundiza en los temas de proyecto que Pietilä presentaba a los alumnos en sus clases de proyectos. En el proceso de comprensión de la evolución teórica y proyectual de los arquitectos se considera imprescindible la revisión de otros edificios propios que se enmarcan en el Contexto profesional. Éstos forman parte de la etapa de mayor actividad del estudio como son el Pabellón de Finlandia para la Exposición de Bruselas (1956-58), la Iglesia de Kaleva en Tampere (1959-66) y el Pabellón Nórdico para la Bienal de Venecia de 1960. Se completa la visión de estos tres ejemplos previos a Dipoli desde las investigaciones teóricas que realizó de forma paralela y que se difundieron a través de varias exposiciones. Nos centraremos en aquellas tres que fueron más relevantes en la madurez del arquitecto (Morfología y Urbanismo, La Zona y Estudios Modulares) para establecer relaciones entre unos aspectos y otros. En esta sección no se pretende realizar un análisis en profundidad, ni tampoco recoger la mayor parte de la obra de los Pietilä, sino más bien revelar los rasgos más significativos que faciliten el entendimiento de los valores anteriormente mencionados. Por último, Incidencia de Dipoli se refiere a la repercusión del edificio durante su construcción y finalización. Desde esta premisa, recoge el conjunto de críticas publicadas en las revistas de mayor difusión internacional que decidieron mostrar la propuesta además desde el propio interés del proyecto, por tratarse de un arquitecto reconocido internacionalmente gracias a la repercusión que obtuvieron sus proyectos anteriores. Se analiza el contenido de los artículos para establecer diversos encuentros con el capítulo Contextos y con los propios escritos de Pietilä. También se recogen las opiniones de críticos relevantes como Kenneth Frampton, Bruno Zevi o Christian Norberg-Schulz, destacando aquellos aspectos por los que mostraron un interés mayor. También se recoge y valora la opinión de sus homólogos finlandeses y que contradictoriamente se sitúa en el polo opuesto a la del juicio internacional. Se adentra en las situaciones complejas que propició el rechazo del edificio al desvincularse por completo de la corriente racionalista que dominaba el pensamiento crítico finés unido a la búsqueda de nuevas alternativas proyectuales que les distanciase del éxito del maestro Alvar Aalto. Pretende esclarecer tanto la justificación de dichos comentarios negativos como los motivos por los cuales Reima y Raili no obtuvieron encargos durante casi diez años, tras la finalización de Dipoli. Nos referiremos también a la propia opinión de los arquitectos. Para ello, en el apartado Morfología Literal se recoge el texto que Reima Pietilä publicó en el número 9 de la revista Arkkitehti para contrarrestar las numerosas críticas recibidas. Se subraya aquellos aspectos de proyecto que inciden directamente en la percepción y razón de ser de la propuesta. Por último, se manifiesta la valoración crítica de dos personas muy próximas al entorno personal y profesional de los Pietilä: Roger Connah y Malcolm Quantrill. Ambas figuras son las que han adentrado en el trabajo de los arquitectos con mayor profundidad y aportado una visión más completa del contexto arquitectónico de Finlandia en el s.XX. Se han interesado principalmente por el conocimiento morfológico que les ha llevado a la observación de los fenómenos de la naturaleza. Se apunta también la falta de objetividad de sus opiniones originadas en parte por haber colaborado profesionalmente y ser amigo íntimo de la familia respectivamente. El valor de la documentación aportada por ambos reside principalmente en la fiel transmisión de las explicaciones del propio Pietilä. El último capítulo Proyecto y Construcción engloba tanto la descripción exhaustiva del proyecto como el análisis de la obra. Al tiempo que se explica la propuesta, se establecen continuamente relaciones y paralelismos con otras arquitecturas que ayudan a entenderla. Para ello, se establecen tres apartados elementales: “El lugar”, “Programa y geometrías” y “Presencia y materialidad física” y se pretende identificar aquellas herramientas de proyecto en las que confía para la materialización de la obra al tiempo que se profundiza en la evolución de la propuesta. En cuanto a El lugar, se describe de manera pormenorizada el recorrido hasta alcanzar el edificio y cómo la mirada atenta de la naturaleza que lo rodea está continuamente presente en todos los dibujos de la propuesta. Se realiza un estudio tanto de la multiplicidad de accesos como del vacío existente en planta baja que forma parte del espacio público y que atraviesa el edificio diagonalmente. Desde aquí se evaluará los espacios intermedios existentes que matizan los ámbitos donde se desarrolla cada una de las actividades. A continuación se enfoca el estudio de la ventana como elemento relevante en la transición de espacios interiores y exteriores para posteriormente adentrarnos en la importancia de los recorridos en la planta superior y cómo las salas polivalentes se acomodan a estos. Programas y geometrías explica la solución y desarrollo de la propuesta a través de los tanteos de la planta. Detecta simultáneamente aquellos aspectos que aparecen en otros proyectos y que pueden haber influido en el desarrollo de la obra. Una vez que han sido estudiados los dos niveles se introduce la sección para analizar las conexiones entre ambos planos, destacando los tipos de escaleras y accesos que propician la multiplicidad de recorridos y en consecuencia el movimiento de las personas. En el último apartado se identifica la geometría de la estructura a través de la descripción formal de la cubierta y sus apoyos en planta para conocer cómo responde el volumen definitivo a la adecuación de los usos. El carácter del edificio a través del empleo de los materiales y las técnicas de construcción utilizadas se indaga desde la Materialidad física. Este punto de vista esclarece temas de proyecto como la relación multisensorial de Dipoli y el concepto del tiempo relacionado con espacios de carácter dinámico o estático. Una vez se ha realizado un análisis de la obra construida a través de sus recorridos, se plantea un último regreso al exterior para observar la presencia del edificio a través de su tamaño, color y texturas. Este apartado nos mostrará la mirada atenta a la escala del proyecto como vector de dirección que pretende encontrar la inserción adecuada del edificio en el lugar, cerrando el proceso de proyecto. El motivo de desarrollar esta tesis en torno a Dipoli se apoya en su consideración como paradigma de una arquitectura que confía en la observación sensible del programa, uso, las escalas de los espacios, circulaciones y su relación y anclaje con el lugar como argumentos fundamentales de proyecto, cuya realidad concreta consigue situar la propuesta en el marco histórico de la arquitectura nórdica e internacional. Además la distancia histórica desde mundo actual respecto a la década de los años 60 del s.XX nos permite entender el contexto cultural donde se inserta Dipoli que continúa nuestra historia reciente de la arquitectura y concibe la obra construida como una extensión de nuestro mundo contemporáneo. Por ello se valora el proyecto desde la mirada hacia atrás que analiza las diferencias entre la realidad construida y las intenciones de partida. Esta revisión dotada de una distancia crítica nos permite adentrarnos en la investigación de manera objetiva. Igualmente presenta una distancia histórica (referida al tiempo transcurrido desde su construcción) y socio-cultural que favorece la atenuación de prejuicios y aspectos morales que puedan desviar una mirada analítica y se alejen de una valoración imparcial. Dipoli, enmarcada en dicho periodo, mantiene la capacidad crítica para ser analizada. ABSTRACT The dissertation defends Dipoli ( 1961-1966 ) as one of the most significant examples of the Reima ( 1923-1993 ) Raili Pietilä (1926 -), who joined both personally and professionally the same year of the project´s competition (1961). Due to the difficulty of the commission by the size and flexibility of the required areas, there was not first prize awarded because none of the submitted proposals met all the requirements. The jury awarded Dipoli with second prize together with a competing scheme by Osmo Lappo. The board subsequently asked for a further development of both proposals and finally selected the one by Pietilä. The completed project allows a wide range of social activities such as meetings, night entertainment, performances, film screenings, dinners and dance to take place while the facility can also serve as a dining hall during winter months and conference center in the summer when necessary. In addition, the building was intended to house the Helsinki University of Technology (now Aalto University) Student Union. The University, at the time being designed by Alvar Aalto following his successful entry to the master plan competition in 1949, was located a few kilometers from the capital on the new campus in Otaniemi. The most characteristic element of the project is its roof which can be described as a continuous form achieved an in-situ concrete cavity structure that can modulate two different geometric languages and generate a singular space under it. The building is, in general terms, an unique shell space with many functional possibilities. Its geometry allows the program to split its functions into smaller sizes without losing the identity or formal unity of the general object. The way in which the spaces are illuminated is solved in two different ways. First, while the Cartesian-line volume presents a series of longitudinal openings into which natural light penetrates, the free-form volume shows a set of skylights in apparently random positions that vary in size and that introduce natural light through the roof in a more controlled manner. In addition the perimeter openings are present that relate directly to the nature that surrounds the building. The adaptable thickness of the roof provides a set of solutions that resolve the three main issues of the project: the adequacy of the functions in the interior areas, the complex capability for user flows and circulation and the manner in which the building is inserted in its context. The perception of the roof´ horizontal plane offers multiple interpretations, from its primary use as a primitive cover whose distance from the ground compresses the void and creates a light tension, to the new relationships with the landscape where by the roof becomes a façade cladding and rests directly on the ground to create a physical boundary between interior and exterior. The main scope of this research is to better understand the particular trace of Dipoli from a rigorous architectural view to deep into the knowledge of the building and, at the same time, to explain the space through a series of project design tools that have been used. For this reason, an accurate documentation has arisen from collecting, selecting and redrawing the existing information from the sketching stage to the built object. A through reanalysis of the Otaniemi Student Center therefore provides not only a more complete understanding of the work of the architects, but also leads to a better comprehension of the history of Finnish architecture, which is related to other cultural relationships and which shares certain architectural values which a more comprehensive understanding of general architectural history. This research starts from the working hypothesis that the final shape of the building and its relationship to its place created a type of architecture that relies on a sensitive observation of the program, the use of varying scales of space, the movement and flow of people and finally the coexistence with the natural context. In this sense, the work is developed based on those aspects that are also reflected in the influence of others architects by understanding both their own and other architects´ work. In order to obtain a personal reading of the project facts that allowed the architects construct Dipoli (understanding the facts as a set of tools and project mechanisms that are able to generate a particular volumetric composition and dynamic spaces that at the same time provide an expressive exterior), the research hinges on two main sections, "Contexts" and "Design and Construction", that study the project from all perspectives. This two parts address the description of temporal , physical , cultural , personal and professional framework, analysis and synthesis of the proposal and finally, the national and international influences on the project. Contexts seek to place the work and to facilitate the understanding of all aspects and conditions that led to the creation of Dipoli. This chapter is subdivided into five sections: Historical Context, Cultural and Physical, Personal, Professional and Dipoli Influences. Historical Context focuses on a detailed description of a set of precedents that influenced the architect when making decisions during design process. The objective is to define the conditions that could directly or indirectly shape the work. This chapter begins by highlighting issues of common interest to the rest its Finnish counterparts. The text is mainly focused on the 1950s as a prelude to Dipoli´s conception. It will also address the process of Finnish architecture from the late nineteenth century as linked to the national identity crisis that the great master Alvar Aalto overcame with both his works and personality, being a great drain on the rest of his colleagues. This aspect caused a reaction against Aalto and his projects. For this reason, at the time that Dipoli came into being a number of professionals who strongly defended the traces of Cartesian Rationalism, including Juhani Pallasmaa and Aulis Blomstedt emerged and brought a new intellectual perspective to the Finnish architecture scene. It is thus inevitable that the presence of Alvar Aalto will be apparent throughout the dissertation to allow a better understanding of the organizational and human character of their work from the Pietiläs´ perspective. Later, this chapter identifies those interests that dominated the international architectural framework that could have influenced Dipoli. The project will be placed in relation to various contemporary architectural works that were created using a different approach to that outlined by the Modern Movement. This is present in the case of Team 10 group and with specific examples of German architects including Hans Scharoun and Hugo Häring, as well as some commonalities with Soviet Constructivism. These relationships with other architecture qualify its singular character and even extend how this proposal amplifies those shared aspects. Physical and Cultural Context involves the unique site where the building is located which includes different features from the location of other buildings on the campus. IT then progresses into the origin of the new campus from the urban planning of Alvar Aalto and reveals both the setting and proposed constructions that Aalto had developed. This section also highlights the aspects that led to the choice of the site. I go deep into the program proposed by the jury (of whom Aalto was a member) and the analysis of the alternative proposals that received a special commendation. Finally, I study and define the most relevant works located near Dipoli, emphasizing primarily the work of the Sirens (Heikki and Kaija) and Alvar Aalto for the reasons developed in the previous section. I then proceed with the Personal Context, where a series of biographical data are selected to begin to explain the personal circumstances that outlined the Pietilas´ architectural understanding and consequently could have influenced their intellectual approach to design Dipoli. Then the text explores their professional and personal relationship to establish what extent they participated in the proposal. This section concludes with the study of the Reima Pietilä´s teaching period at Oulu that explores the issues he presented to his students there. In the process of understanding the Pietiläs´ theoretical and design evolution, it must be considered essential to study other buildings that are part of their professional context. These projects belong to the most active stage of their office and include the Finnish Pavilion for the World´s Fair in Brussels (1956-1958), Kaleva Church in Tampere (1959-1966) and the Nordic Pavilion at the 1960 Venice Biennale. We will complete the view of Dipoli from previous theoretical investigations performed in parallel that were spread through several exhibitions. We will focus on the three that were most relevant to the evolution of the architect (Morphology and Urbanism, the Zone, and Stick Studies) to establish a series of useful relationships. This section is not intended to be an in-depth analysis nor to collect most of the work of the Pietiläs´; but rather to reveal the most significant features that facilitate an understanding of the above values. Finally, Dipoli´s Impact refers to the influence of the building from many points of view during its construction and after its completion. It collects the reviews published in the world's most relevant magazines which had decided to show the alternate proposals, generally conceived of by internationally-renowned architects. I analyze the content of the articles in order to establish a series of parallels with the chapter Contexts and own writings Pietilä to clarify if main design directions were clear at that time. The views of relevant critics, including Kenneth Frampton, Bruno Zevi and Christian Norberg -Schulz, are also collected here. This episode also collects and assesses the views of these critics´ Finnish counterparts that generally stood at the opposite side of the international debate. It delves into the complex situation that led to the rejection of the building by the rationalists that dominated the Finnish critical thinking while searching for new alternatives to distance themselves from the Alvar Aalto´s success. It aims to clarify both the justification for these negative comments and the reasons why Reima and Raili not obtain a single commission for nearly ten years after the completion of Dipoli. From the critics we will approach the opinion of Reima Pietilä himself. To do this, in the Literal Morphology section we will see how the architect tried to defend his position. Those design tool that directly affected the perception of the proposal are provided through the figures of Roger Connah and Malcolm Quantrill. Finally, a critical –personal and professional- review of these two very close figures will take place. Despite knowing that both delved into the work of architects with greater depth and provided a complete view of the Finnish architectural context in 20th century, they have focused mainly morphological knowledge which has led to the observation of natural phenomena. It also notes the lack of objectivity in their views caused in part by, in the case of Connah, collaborating professionally and in that of Quantrill being a close friend of the Pietilä family. The value of the documentation provided by both resides mainly in the faithful transmission of the Pietiläs´ own explanations. The final chapter covers both Design and Construction and provides a comprehensive project description in order tofaithfully analyse the work. As the proposal is being explained, relationships of its built form are continuously linked to other architectural projects to gain a better understanding of Dipoli itself. To do this we have set three basic sections: "The Place", "Geometries & Function" and "Presence and Materiality. Construction process" that intended to identify those project tools for the realization of the work while deepens the proposal´s evolution. The Place describes how to approach and reach the building in detail and how the view out towards the surrounding natural setting is continuously shown in the proposal´s drawings. We will study both the multiplicity of entrances as well as the corridor downstairs as part of the public space that diagonally goes through the building. Then, the existing voids in the concrete cave for public activities will be evaluated. Lastly, the study will focus on the openings as a significant element in the transition from interior and exterior areas to describe the importance of the circulation on the second floor and how function is able to accommodate through the areas of void. Geometries & Function explains the final solution and the development of the proposal through the floor plan. Simultaneously it detects those aspects that appear in other projects and that may have influenced the development of the work. Once we have analyzed both levels –ground and second floor- section drawings come into the topic to study the connections between the two levels and highlighting the types of hierarchy for the multiple paths to organize the flows of people inside the building. In the last section the structural geometry is identified through the description of the form and how it responds to the final volumetrical settings. The character of the building through the use of materials and construction techniques inquires from Presence and Materiality. This point of view clarifies multisensory project issues as Dipoli relationship to the dynamic or static character or different spaces inside the building. Once the analysis has been made we will step back to a final return to the building´s exterior to analyze the presence of the building through its scale, colour and textures. This section emphasizes the project´s scale and orientation to find the proper insertion of the building in place. In short, this dissertation has been done by the idea that Pietiläs´special abilities were allowed from a sensitive observation of the program, the creation of a variety of special scales, dynamic circulation and the relating relationship with the project´s location as fundamental design tools. From this aspect, Dipoli could be more usefully framed in the historical context of Nordic and international architecture. The dissertation allows us to better understand the cultural context of the 1960s, in which Dipoli was established since it continues our recent architectural history. The final built form is conceived as an extension of our contemporary world. Therefore the project is assessed through the comparison of the architects´ intentions and the final completed project.

La iglesia de Santiago de los españoles en Roma y su entorno entre los siglos XV y XIX. Una historia a través del dibujo

Plaza Navona representa una de las visitas obligadas de Roma, pero solo algunos advertirán en ella la presencia española en la sala de exposiciones del Instituto Cervantes o en la inmediata Libreria Española. Todavía serán menos los que se percatarán de la huella española dejada en aquella iglesia de fachada anónima situada, en el extremo sur de la plaza: la antigua iglesia de Santiago de los Españoles. La presente tesis pretende, utilizando el dibujo como guía, herramienta y fin del proceso de análisis y estudio, reconstruir el proceso de conformación y construcción de la que fue iglesia española principal, cuya fundación hace patente el destacado papel jugado por la “nación” castellana en Roma durante la Edad Media; y en torno a la que se aglutinaron las actividades religiosas, diplomáticas y financieras de los castellanos que vivieron en la actual capital italiana. Se intentará recrear en el tiempo la que es hoy la iglesia de Nuestra Señora del Sagrado Corazón, sometiéndola a una restitución gráfica disciplinada, homogénea y objetiva en la medida de lo posible de las varias etapas que la han caracterizadas, desde su fundación hasta cuando en 1878 España se deshizo de ella, ya en ruina, vendiéndola. Como nos comenta Gaetano Moroni, de todas las comunidades nacionales que se encontraban en Roma la española parece ser efectivamente una de las más rica y prestigiosa. Aunque lo que no cuenta Moroni no haya sido todavía demostrado, dicho enunciado resulta de todas formas interesante puesto que pone el acento sobre el hecho de que ya desde el siglo X parece ser habitual de ocupar y reutilizar antiguas ruinas, usándolas como base para la construcción de hospitales para los peregrinos. Esta operación se hizo particularmente frecuente sobre todo antes del Gran Jubileo de 1450: de hecho desde la primera mitad del Quattrocento se fundan distintas iglesias y hospitales nacionales para acoger y prestar una adecuada asistencia y socorro a los innumerables peregrinos que llegaban a la ciudad, edificios que se van construyendo sobre los restos de antiguos edificios de época romana. Prueba de ello es en efecto la fundación originaria de la iglesia y hospital de los Españoles que, parte del conjunto de edificios que compone la Plaza Navona, situada en el corazón de Campo Marzio y cuya posición y forma corresponden a la del antiguo Estadio de Domiciano, y que ahora es en sus dimensiones, en su imagen arquitectónica y en su consistencia material, el resultado de la definición proyectual y de las transformaciones que se llevaron a cabo sobre lo que quedaba del antiguo templo español del siglo XV, entre finales del ‘800 y los años 30 del siglo XX . Transformaciones devastadoras, huellas grabadas o canceladas que encuentran una justificación en los acontecimientos históricos reflejados en el patrimonio urbano. El análisis de todas las fuentes permite trazar, si no la totalidad, buena parte de las modificaciones que la antigua iglesia de Santiago ha sufrido. La construcción del templo se puede dividir en tres momentos decisivos: una primera etapa de fundación en 1450-1478 en la que la iglesia tenía fachada y entrada en via de la Sapienza, hoy Corso Rinascimento; una segunda de significativa ampliación hacia Plaza Navona con una nueva fachada monumental hacia ese espacio público en 1496-1500; y una última importante ampliación entre 1525-1526, llevada a cabo por el arquitecto Antonio da Sangallo el Joven. Tras la intensa vida del templo, en el siglo XVIII, éste cae en ruina y finalmente es vendido en 1878 a la orden de los misioneros franceses de Nuestra Señora del Sagrado Corazón que la reconvierten en iglesia reformando totalmente el conjunto en 1881, según proyecto de Luca Carimini. En 1936, en plena fase de rectificación de trazados urbanos por obra del régimen fascista, según proyecto de Arnaldo Foschini, se mutila su extremidad hacia vía de la Sapienza dejando su estado tal y como se contempla en la actualidad. ABSTRACT The objective of this thesis is the reconstruction of the design and edification process -using drawings and sketches as a guide, tool and the end of the analytical process- of a church which was once the preeminent Spanish church in medieval Rome, known today as Nostra Signora del Sacro Cuore (Our Lady of the Sacred Heart). The founding of this church illustrates the important role held by the Castillian “nation” in Rome during the Middle Ages. It was the focal point of all the religious, diplomatic and economic activities of the Castillian community residing in today’s Italian capital. The aim of this proyect is a recreation the church in time by submitting it to a disciplined, homogenous and objective graphic restitution of the various stages most characteristic the temple, starting from its foundation until 1878 when, in a state of ruins, the church was finally sold off by Spain. Gaetano Moroni once commented that of all the international communities found in Rome, the Spanish community seemed to be one of the wealthiest and most prestigious. Such a statement proves interesting as it emphasizes that starting in the 10th century we see there was a widespread custom of occupying and reusing old ruins for use as the bases of new constructions of hospitals for pilgrims. This custom became especially frequent just before the Jubilee Year of 1450: in fact, in the first half of the Quattrocento we see the founding of many different national churches and hospitals which provided shelter and care to the countless pilgrims arriving in the city, buildings which were constructed on top of the ruins of ancient buildings left over from Roman times. Proof of this is the original foundation of the Spanish church and hospital forming part of the Piazza Navona, built upon and following the outline of the Stadium of Domitian, in the heart of Campo Marzio. Now, in its dimensions, its architectural image and its material substance, it represents the predominant result of the planning definitions and the transformations which affected the old 15th-century Spanish temple. Ocurring between the end of the 19th century and the 1930s, the transformations were devastating, erasing original peculiarities and engraving new ones, transformations made justifiable by the historical events reflected in its urban environs. Analyzing all sources allows us to trace, even if not in entirety, still a sizeable portion of the modifications undergone by the old Church of Saint James. The construction of the temple can be divided into three decisive moments: its foundation, from 1450 to 1478, when the church’s façade and main door looked out on to the Via della Sapienza, today’s central avenue of Corso del Rinascimento; the second stage being a major expansion towards the Piazza Navona (1496-1500) with a new, monumental façade facing the public space; and the third was the last significant expansion, carried out from 1525 to 1526 by the architect Antonio da Sangallo the Younger. Despite an intense and bustling life during the Modern Age, in the 18th century the church began to fall into ruin and was finally sold in 1878 to the order of French missionaries of Our Lady of the Sacred Heart, who reconverted it into a church and completely renovated the structure in 1881 in a project supervised by Luca Carimini. In 1936, the corrective urban redesign of Rome carried out by the fascist regime and implemented by Arnaldo Foschini mutilated the part bordering Via della Sapienza, leaving it as we see it today.

Methodology for estimating building integrated photovoltaics electricity production under shadowing conditions and case study

Building integrated photovoltaic (BIPV) systems are a relevant application of photovoltaics. In countries belonging to the International Energy Agency countries, 24% of total installed PV power corresponds to BIPV systems. Electricity losses caused by shadows over the PV generator have a significant impact on the performance of BIPV systems, being the major source of electricity losses. This paper presents a methodology to estimate electricity produced by BIPV systems which incorporates a model for shading losses. The proposed methodology has been validated on a one year study with real data from two similar PV systems placed on the south façade of a building belonging to the Technical University of Madrid. This study has covered all weather conditions: clear, partially overcast and fully overcast sky. Results of this study are shown at different time scales, resulting that the errors committed by the best performing model are below 1% and 3% in annual and daily electricity estimation. The use of models which account for the reduced performance at low irradiance levels also improves the estimation of generated electricity.