Relay lens-free birefringence-customized stackable beam-steering modules for optical interconnects

A previously suggested birefringence-customized modular optical interconnect technique is extended for lens-free relay operation. Various lens-free relay imaging models are developed. We claim that the lens-free relay system is important in simplifying an optical interconnect system whenever the imaging conditions permit. To verify the validity of various proposed concepts, we experimentally implemented some 8 x 8 optical permutation modules. High-power efficiency and low channel cross talk were experimentally observed. In general, the larger the channel spacing, the less the cross talk. A quantitative cross-talk measurement of the lens-free relay system shows that, for a fixed channel width of 0.5 mm and channel spacings of 0.5, 1, and 2 mm, a less than -20-dB cross-talk performance can be guaranteed for lens-free relay distances of 40, 280, and 430 mm, respectively. (C) 1998 Optical Society of America.

Routing scheme, permutation properties, and optical implementation of a four-shuffle-exchange-based Omega network

The routing scheme and some permutation properties of a four-shuffle-exchange-based Omega network are discussed. The corresponding optical setup, which is composed of 2-D phase spatial light modulators and calcite plates, is proposed and demonstrated through mapping the inputs to a 2-D array. Instead of one shuffle-exchange followed by one switching operation as in ordinary Omega networks, in our presented system, the shuffle interconnection embraced in the switches is accomplished simply by varying the switching structure of each stage. For the proposed polarization-optical modules, the system is compact in structure, efficient in performance, and insensitive to the environment. (C) 1997 Society of Photo-Optical Instrumentation Engineers.

Decoding cosets of first-order Reed-Muller code

Proper encoding of transmitted information can improve the performance of a communication system. To recover the information at the receiver it is necessary to decode the received signal. For many codes the complexity and slowness of the decoder is so severe that the code is not feasible for practical use. This thesis considers the decoding problem for one such class of codes, the comma-free codes related to the first-order Reed-Muller codes.

A factorization of the code matrix is found which leads to a simple, fast, minimum memory, decoder. The decoder is modular and only n modules are needed to decode a code of length 2ⁿ. The relevant factorization is extended to any code defined by a sequence of Kronecker products.

The problem of monitoring the correct synchronization position is also considered. A general answer seems to depend upon more detailed knowledge of the structure of comma-free codes. However, a technique is presented which gives useful results in many specific cases.

Physiological modules for generating discrete and rhythmic movements: action identification by a dynamic recurrent neural network

In this study we employed a dynamic recurrent neural network (DRNN) in a novel fashion to reveal characteristics of control modules underlying the generation of muscle activations when drawing figures with the outstretched arm. We asked healthy human subjects to perform four different figure-eight movements in each of two workspaces (frontal plane and sagittal plane). We then trained a DRNN to predict the movement of the wrist from information in the EMG signals from seven different muscles. We trained different instances of the same network on a single movement direction, on all four movement directions in a single movement plane, or on all eight possible movement patterns and looked at the ability of the DRNN to generalize and predict movements for trials that were not included in the training set. Within a single movement plane, a DRNN trained on one movement direction was not able to predict movements of the hand for trials in the other three directions, but a DRNN trained simultaneously on all four movement directions could generalize across movement directions within the same plane. Similarly, the DRNN was able to reproduce the kinematics of the hand for both movement planes, but only if it was trained on examples performed in each one. As we will discuss, these results indicate that there are important dynamical constraints on the mapping of EMG to hand movement that depend on both the time sequence of the movement and on the anatomical constraints of the musculoskeletal system. In a second step, we injected EMG signals constructed from different synergies derived by the PCA in order to identify the mechanical significance of each of these components. From these results, one can surmise that discrete-rhythmic movements may be constructed from three different fundamental modules, one regulating the co-activation of all muscles over the time span of the movement and two others elliciting patterns of reciprocal activation operating in orthogonal directions.

Physiological modules for generating discrete and rhythmic movements: Component analysis of EMG signals

A central question in Neuroscience is that of how the nervous system generates the spatiotemporal commands needed to realize complex gestures, such as handwriting. A key postulate is that the central nervous system (CNS) builds up complex movements from a set of simpler motor primitives or control modules. In this study we examined the control modules underlying the generation of muscle activations when performing different types of movement: discrete, point-to-point movements in eight different directions and continuous figure-eight movements in both the normal, upright orientation and rotated 90 degrees. To test for the effects of biomechanical constraints, movements were performed in the frontal-parallel or sagittal planes, corresponding to two different nominal flexion/abduction postures of the shoulder. In all cases we measured limb kinematics and surface electromyographic activity (EMB) signals for seven different muscles acting around the shoulder. We first performed principal component analysis (PCA) of the EMG signals on a movement-by-movement basis. We found a surprisingly consistent pattern of muscle groupings across movement types and movement planes, although we could detect systematic differences between the PCs derived from movements performed in each sholder posture and between the principal components associated with the different orientations of the figure. Unexpectedly we found no systematic differences between the figute eights and the point-to-point movements. The first three principal components could be associated with a general co-contraction of all seven muscles plus two patterns of reciprocal activatoin. From these results, we surmise that both "discrete-rhythmic movements" such as the figure eight, and discrete point-to-point movement may be constructed from three different fundamental modules, one regulating the impedance of the limb over the time span of the movement and two others operating to generate movement, one aligned with the vertical and the other aligned with the horizontal.

Insights into mechanism kinematics for protein motion simulation

Background: The high demanding computational requirements necessary to carry out protein motion simulations make it difficult to obtain information related to protein motion. On the one hand, molecular dynamics simulation requires huge computational resources to achieve satisfactory motion simulations. On the other hand, less accurate procedures such as interpolation methods, do not generate realistic morphs from the kinematic point of view. Analyzing a protein's movement is very similar to serial robots; thus, it is possible to treat the protein chain as a serial mechanism composed of rotational degrees of freedom. Recently, based on this hypothesis, new methodologies have arisen, based on mechanism and robot kinematics, to simulate protein motion. Probabilistic roadmap method, which discretizes the protein configurational space against a scoring function, or the kinetostatic compliance method that minimizes the torques that appear in bonds, aim to simulate protein motion with a reduced computational cost. Results: In this paper a new viewpoint for protein motion simulation, based on mechanism kinematics is presented. The paper describes a set of methodologies, combining different techniques such as structure normalization normalization processes, simulation algorithms and secondary structure detection procedures. The combination of all these procedures allows to obtain kinematic morphs of proteins achieving a very good computational cost-error rate, while maintaining the biological meaning of the obtained structures and the kinematic viability of the obtained motion. Conclusions: The procedure presented in this paper, implements different modules to perform the simulation of the conformational change suffered by a protein when exerting its function. The combination of a main simulation procedure assisted by a secondary structure process, and a side chain orientation strategy, allows to obtain a fast and reliable simulations of protein motion.

Fisheries in a changing scene [includes section on proposed Morecambe Bay barrage scheme]: paper presented at Association of River Authorities, Annual Conference, Morecambe, 1967

The report looks at trends developing in the area of the Lancashire River Authority which will, by the turn of the century, bring tremendous pressures to bear on its natural resources, particularly land and water. It looks at difficulties maintaining an environment suitable for all, human or otherwise, including construction of energy plants and increasing population. It explores the scheme of harnessing water on Morecambe Bay, including fishery advantages and disadvantages. The report looks at fish deaths and diseases in Morecambe Bay and the Lancashire area, providing statistics.

Design and implementation of fishery modules in integrated household surveys in developing countries

Fish and other aquatic animals contribute to the food security of citizens of developing countries, both as a source of income and as a component of healthy diets, yet fishing is not currently captured in most integrated household surveys. This sourcebook provides essential technical guidance on the design of statistical modules and questionnaires aimed at collecting fishery data at the household level. Background on the main policies important to the fishery sector, information on the data needed to analyze issues of policy relevance, and methodology on the construction of survey questions to collect necessary data are also provided. The document is organized to provide essential technical guidance on how to design statistical modules and questionnaires aimed at collecting fishery data at the household level. It includes an overview of the main technical and statistical challenges related to sampling fishery-dependent households. The document starts with an introductory section identifying the potential reasons why fisheries and in particular small-scale fisheries have not been adequately included in national statistical systems in a large number of countries. The report then proposes a succinct review of what is known (and what remains unknown) about small-scale fisheries and their contribution to the livelihoods of households in sub-Saharan Africa. It also provides readers with background on the main policies that are important to the fishery sector, information on the data needed to analyze issues of policy relevance, and methodology on the construction of survey questions to collect necessary data.

Relação chuva-vazão nos telhados verdes modulares sob chuva simulada induzida.

A perda de vegetação natural e o aumento das superfícies impermeáveis decorrentes da expansão urbana têm mostrado que os tradicionais sistemas de drenagem urbana são insuficientes e pouco adaptáveis às alterações de uso do solo. Uma das consequências disso é o aumento da velocidade do escoamento superficial (runoff) que favorece as inundações, com enormes prejuízos materiais e ambientais. As inundações ocorrem geralmente quando ha ocorrência de chuvas de alta intensidade. O objetivo deste trabalho foi estudar a contribuição dos telhados verdes modulares submetidos a chuvas de alta intensidade, 155mm/h com duração de 7,0 minutos para retenção e retardo do escoamento superficial. Além disso, foram determinados valores para parâmetros de modelos clássicos chuva-vazão: Método Racional (C) e CN (SCS), que poderá, futuramente, servir de modelagem hidrológica dos impactos da adoção de telhados verdes no controle das enchentes urbanas. A metodologia adotada foi de natureza experimental e envolveu a construção de bancadas com inclinação regulável para suporte dos módulos experimentais e um sistema para indução de chuvas com intensidade controlada. Foram estudados três modelos de sistema modular para telhado verde que permitem o armazenamento de água no fundo da bandeja que compõe os módulos, sendo 2 de 17,0 L (M-17 e F-17) e 1 de 4,0 L (M-4), nas condições de solo seco e solo úmido. Em cada módulo vegetado foram utilizadas 3 espécies de vegetação: Portulaca oleracea (Onze horas), Callisia repens (Dinheiro em penca) e Apnia cordfolia (Rosinha do sol). Os resultados demonstraram que os volumes retidos, calculados a partir da observação do runoff, nas diferentes situações, foram coerentes entre si e com dados relatados na literatura. Os módulos vegetados produziram os melhores resultados com solo seco e os piores resultados com solo úmido. O percentual médio de retenção, considerando todos os tipos de módulos, foi de 58% do volume total de água induzida, com retardo médio de 12 minutos no runoff. Os valores médios de C (Método Racional) foram 0,4, 0,48, 0,36, para os módulos M-17, M-4 e F-17, respectivamente e os de CN (SCS) foram 93, 95, 93, para os mesmos módulos. Conforme esperado, os maiores valores de CN foram para solos úmidos, mantendo a relação que quanto menor o volume retido, maior o runoff e o CN. O módulo F-17 foi o que apresentou melhor desempenho em todos os aspectos (redução do escoamento, retenção hídrica e retardo do runoff). Este estudo demonstra a boa contribuição que esse tipo de sistema pode proporcionar na retenção e retardo do escoamento superficial, mesmo para chuvas intensas de curta duração, principalmente após período de curta estiagem, situação comum em locais de clima tropical. Futuros estudos deverão avaliar o desempenho dos sistemas modulares de telhados verdes com outras características e intensidades de chuvas. A adoção de telhados verdes deve ser cautelosa, sobretudo pela carga extra que esse tipo de sistema representa.