L'effet de l'entrainement avec le ballon d'exercice pendant la grossesse sur l'accouchement.

Résumé Introduction : L’entrainement avec le ballon d’exercice pendant la grossesse a des effets positifs sur le déroulement de l’accouchement. Le but de l’étude était d’identifier si une association existe entre le volume d’entrainement avec le ballon d’exercice durant la grossesse en milieu naturel sur l’issue du déroulement de l’accouchement, soit la durée des phases 1 (dilatation/phase active) et 2 (expulsion), ainsi que l’usage de la péridurale et de la césarienne. Méthode: Cette étude quasi-expérimentale a été menée auprès d'un échantillon de convenance composée de 32 femmes enceintes qui ont pris part entre un et 28 cours d'exercice supervisé durant la grossesse (programme Ballon Forme), avec la possibilité d'effectuer des exercices supplémentaires à la maison avec le ballon d’exercice. Un questionnaire et un journal de bord ont été remplis par les participantes, avec l'aide d'une infirmière de l’hôpital pour les données médicales. Résultats: Un volume d’entrainement élevé, incluant l’entraînement sous forme de cours et à domicile, a été significativement associé à une durée plus courte d’accouchement, que ce soit pour le temps total de l’accouchement (r = -0,408, p = 0,031) ou pour les deux phases spécifiques de l’accouchement [la phase 1: r = -0,372 ; p = 0,043 et la phase 2: r = -0,415, p = 0,028]. Un volume d’entrainement élevé a aussi été lié à une réduction de la deuxième phase chez les femmes qui donnaient naissance pour la première fois. La durée totale des exercices exécutés lors des cours a été significativement associée à cette réduction comparativement aux exercices à la maison. Aucun effet indésirable n'a été observé avec le volume d’entrainement élevé sur les paramètres de l’accouchement et la santé du bébé (Apgar et poids du bébé à la naissance). En fait, un nombre très faible de césarienne (6%), de recours à la péridurale (47%) et d'extraction instrumentale (forceps ou ventouse: 13%) a été observé dans notre échantillon de femmes. Conclusion: La pratique du ballon d’exercice est une avenue prometteuse pour les femmes enceintes et un niveau élevé d’entraînement est associé à un accouchement plus rapide et sans complications pour le bébé. L’implantation de ce programme pourrait éventuellement contribuer à réduire considérablement les coûts de santé au Québec en favorisant l’accouchement naturel. Des interventions et des recherches ultérieures devront considérer et examiner cette modalité spécifique d’entrainement pour les femmes enceintes.

Le délai entre le traumatisme médullaire et la chirurgie a-t-il un impact sur la survenue de complications durant la phase aigüe d’hospitalisation

Le délai optimal entre une lésion médullaire traumatique (LMT) et la chirurgie demeure indéterminé. Cependant, la relation entre la prévention de complications et le délai chirurgical n’a jamais été spécifiquement étudiée. L’objectif principal de ce travail était de détecter si les taux de complications chez des LMT étaient associés avec le délai chirurgical. L’objectif secondaire était d’identifier si le délai chirurgical est un prédicteur indépendant de la survenue de complications. Un premier article présente l’analyse d’une cohorte rétrospective de 431 LMTs. Une chirurgie réalisée dans un délai inférieur à 24h (ou inférieur à 72h si un délai de 24h ne peut être respecté) prédisait une diminution du taux de l’ensemble des complications, du taux de pneumonies et du taux de plaies de pression. Les autres facteurs prédictifs de complications identifiés étaient : l’âge, la sévérité de l’atteinte neurologique de la lésion selon l’échelle ASIA, un traumatisme cervical plutôt que thoracique, la présence de comorbidités, la sévérité du traumatisme selon l’échelle ISS et la complexité de la chirurgie. Les connaissances actuelles suggèrent qu’une opération chirurgicale rapide n’a que peu d’effet sur la récupération neurologique chez les LMTs complètes (interruption complète des fonctions sensorimotrices). Pour cette raison, notre second article analyse l’impact du délai chirurgical sur la survenue des complications à partir d’une sous-population de 197 LMTs complètes de notre cohorte. Un délai chirurgical supérieur à 24h prédisait une augmentation des complications, notamment les pneumonies et les infections urinaires. Bien que des études prospectives randomisées sont nécessaires pour confirmer nos conclusions, nos études supportent un délai chirurgical rapide afin de diminuer le taux de complications non neurologiques chez les LMTs.

Quelles personnes sont susceptibles de développer une invalidité en raison de la douleur et comment intervenir en phase initiale? Les principes extraits des résultats de la recherche sur les facteurs prédisposants à l’invalidité

L’invalidité attribuable à la douleur représente un problème important en raison de ses coûts personnels, financiers et sociétaux. L’effort scientifique mène à l’identification des facteurs de risque pour l’évolution de la douleur vers un état qui mine la capacité de la personne affligée à vaquer à ses occupations fondamentales. Cet effort met en relief le rôle déterminant que jouent les facteurs psychosociaux à chaque stade de l’évolution vers l’invalidité en raison de la douleur. Parmi les facteurs mis en cause, se trouvent les difficultés psychologiques (dépression, anxiété, somatisation, trouble de la personnalité, catastrophisme et évitement de l’activité), l’insatisfaction au travail et le contexte de réclamation. Forts de cette connaissance, les pays industrialisés se dotent de lignes directrices pour la prise en charge de la douleur aiguë dans le but de réduire les coûts, tant pour la personne que pour la société. Vingt ans après la parution des premiers guides de pratique, et la publication subséquente de dizaines d’autres guides véhiculant essentiellement les mêmes informations, les médecins peinent toujours à appliquer les recommandations. À partir des données probantes issues de la littérature scientifique, le présent ouvrage propose une synthèse critique des résultats pour pousser la réflexion et faire avancer la démarche dans le sens d’une réduction des coûts personnels, financiers et sociétaux.

OFFLINE AND ONLINE SOLID PHASE EXTRACTION/PRECONCENTRATION OF INORGANICS

Solid phase extraction (SPE) is a powerful technique for preconcentration/removal or separation of trace and ultra trace amounts of toxic and nutrient elements. SPE effectively simplifies the labour intensive sample preparation, increase its reliability and eliminate the clean up step by using more selective extraction procedures. The synthesis of sorbents with a simplified procedure and diminution of the risks of errors shows the interest in the areas of environmental monitoring, geochemical exploration, food, agricultural, pharmaceutical, biochemical industry and high purity metal designing, etc. There is no universal SPE method because the sample pretreatment depends strongly on the analytical demand. But there is always an increasing demand for more sensitive, selective, rapid and reliable analytical procedures. Among the various materials, chelate modified naphthalene, activated carbon and chelate functionalized highly cross linked polymers are most important. In the biological and environmental field, large numbers of samples are to be analysed within a short span of time. Hence, online flow injection methods are preferred as they allow extraction, separation, identification and quantification of many numbers of analytes. The flow injection online preconcentration flame AAS procedure developed allows the determination of as low as 0.1 µg/l of nickel in soil and cobalt in human hair samples. The developed procedure is precise and rapid and allows the analysis of 30 samples per hour with a loading time of 60 s. The online FI manifold used in the present study permits high sampling, loading rates and thus resulting in higher preconcentration/enrichment factors of -725 and 600 for cobalt and nickel respectively with a 1 min preconcentration time compared to conventional FAAS signal. These enrichment factors are far superior to hitherto developed on line preconcentration procedures for inorganics. The instrumentation adopted in the present study allows much simpler equipment and low maintenance costs compared to costlier ICP-AES or ICP-MS instruments.

Dynamic Solid Phase DNA Extraction and PCR Amplification in Polyester-Toner Based Microchip

A variety of substrates have been used for fabrication of microchips for DNA extraction, PCR amplification, and DNA fragment separation, including the more conventional glass and silicon as well as alternative polymer-based materials. Polyester represents one such polymer, and the laser-printing of toner onto polyester films has been shown to be effective for generating polyester-toner (PeT) microfluidic devices with channel depths on the order of tens of micrometers. Here, we describe a novel and simple process that allows for the production of multilayer, high aspect-ratio PeT microdevices with substantially larger channel depths. This innovative process utilizes a CO(2) laser to create the microchannel in polyester sheets containing a uniform layer of printed toner, and multilayer devices can easily be constructed by sandwiching the channel layer between uncoated cover sheets of polyester containing precut access holes. The process allows the fabrication of deep channels, with similar to 270 mu m, and we demonstrate the effectiveness of multilayer PeT microchips for dynamic solid phase extraction (dSPE) and PCR amplification. With the former, we found that (i) more than 65% of DNA from 0.6 mu L of blood was recovered, (ii) the resultant DNA was concentrated to greater than 3 ng/mu L., (which was better than other chip-based extraction methods), and (iii) the DNA recovered was compatible with downstream microchip-based PCR amplification. Illustrative of the compatibility of PeT microchips with the PCR process, the successful amplification of a 520 bp fragment of lambda-phage DNA in a conventional thermocycler is shown. The ability to handle the diverse chemistries associated with DNA purification and extraction is a testimony to the potential utility of PeT microchips beyond separations and presents a promising new disposable platform for genetic analysis that is low cost and easy to fabricate.

A new and improved strategy combining a dispersive-solid phase extraction-based multiclass method with ultra high pressure liquid chromatography for analysis of low molecular weight polyphenols in vegetables

This paper reports on the development and optimization of a modified Quick, Easy, Cheap Effective, Rugged and Safe (QuEChERS) based extraction technique coupled with a clean-up dispersive-solid phase extraction (dSPE) as a new, reliable and powerful strategy to enhance the extraction efficiency of free low molecular-weight polyphenols in selected species of dietary vegetables. The process involves two simple steps. First, the homogenized samples are extracted and partitioned using an organic solvent and salt solution. Then, the supernatant is further extracted and cleaned using a dSPE technique. Final clear extracts of vegetables were concentrated under vacuum to near dryness and taken up into initial mobile phase (0.1% formic acid and 20% methanol). The separation and quantification of free low molecular weight polyphenols from the vegetable extracts was achieved by ultrahigh pressure liquid chromatography (UHPLC) equipped with a phodiode array (PDA) detection system and a Trifunctional High Strength Silica capillary analytical column (HSS T3), specially designed for polar compounds. The performance of the method was assessed by studying the selectivity, linear dynamic range, the limit of detection (LOD) and limit of quantification (LOQ), precision, trueness, and matrix effects. The validation parameters of the method showed satisfactory figures of merit. Good linearity (View the MathML sourceRvalues2>0.954; (+)-catechin in carrot samples) was achieved at the studied concentration range. Reproducibility was better than 3%. Consistent recoveries of polyphenols ranging from 78.4 to 99.9% were observed when all target vegetable samples were spiked at two concentration levels, with relative standard deviations (RSDs, n = 5) lower than 2.9%. The LODs and the LOQs ranged from 0.005 μg mL−1 (trans-resveratrol, carrot) to 0.62 μg mL−1 (syringic acid, garlic) and from 0.016 μg mL−1 (trans-resveratrol, carrot) to 0.87 μg mL−1 ((+)-catechin, carrot) depending on the compound. The method was applied for studying the occurrence of free low molecular weight polyphenols in eight selected dietary vegetables (broccoli, tomato, carrot, garlic, onion, red pepper, green pepper and beetroot), providing a valuable and promising tool for food quality evaluation.

Potentialities of two solventless extraction approaches—Stir bar sorptive extraction and headspace solid-phase microextraction for determination of higher alcohol acetates, isoamyl esters and ethyl esters in wines

A stir bar sorptive extraction with liquid desorption followed by large volume injection coupled to gas chromatography–quadrupole mass spectrometry (SBSE-LD/LVI-GC–qMS) was evaluated for the simultaneous determination of higher alcohol acetates (HAA), isoamyl esters (IsoE) and ethyl esters (EE) of fatty acids. The method performance was assessed and compared with other solventless technique, the solid-phase microextraction (SPME) in headspace mode (HS). For both techniques, influential experimental parameters were optimised to provide sensitive and robust methods. The SBSE-LD/LVI methodology was previously optimised in terms of extraction time, influence of ethanol in the matrix, liquid desorption (LD) conditions and instrumental settings. Higher extraction efficiency was obtained using 60 min of extraction time, 10% ethanol content, n-pentane as desorption solvent, 15 min for the back-extraction period, 10 mL min−1 for the solvent vent flow rate and 10 °C for the inlet temperature. For HS-SPME, the fibre coated with 50/30 μm divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) afforded highest extraction efficiency, providing the best sensitivity for the target volatiles, particularly when the samples were extracted at 25 °C for 60 min under continuous stirring in the presence of sodium chloride (10% (w/v)). Both methodologies showed good linearity over the concentration range tested, with correlation coefficients higher than 0.984 for HS-SPME and 0.982 for SBES-LD approach, for all analytes. A good reproducibility was attained and low detection limits were achieved using both SBSE-LD (0.03–28.96 μg L−1) and HS-SPME (0.02–20.29 μg L−1) methodologies. The quantification limits for SBSE-LD approach ranging from 0.11 to 96.56 μg L−and from 0.06 to 67.63 μg L−1 for HS-SPME. Using the HS-SPME approach an average recovery of about 70% was obtained whilst by using SBSE-LD obtained average recovery were close to 80%. The analytical and procedural advantages and disadvantages of these two methods have been compared. Both analytical methods were used to determine the HAA, IsoE and EE fatty acids content in “Terras Madeirenses” table wines. A total of 16 esters were identified and quantified from the wine extracts by HS-SPME whereas by SBSE-LD technique were found 25 esters which include 2 higher alcohol acetates, 4 isoamyl esters and 19 ethyl esters of fatty acids. Generally SBSE-LD provided higher sensitivity with decreased analysis time.

Banana Peel Applied to the Solid Phase Extraction of Copper and Lead from River Water: Preconcentration of Metal Ions with a Fruit Waste

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preconcentration and determination of Cu(II) in a fresh water sample using modified silica gel as a solid-phase extraction adsorbent

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phase diagrams of a CTAB/organic solvent/buffer system applied to extraction of enzymes by reverse micelles

A partial pseudo-ternary phase diagram has been studied for the cethyltrimethylammonium bromide/isooctane:hexanol:butanol/potassium phosphate buffer system, where the two-phase diagram consisting of the reverse micelle phase (L-2) in equilibrium with the solvent is indicated. Based on these diagrams two-phase systems of reverse micelles were prepared with different compositions of the compounds and used for extraction and recovery of two enzymes, and the percentage of enzyme recovery yield monitored. The enzymes glucose-6-phosphate dehydrogenase (G6PD) and xylose redutase (XR) obtained from Candida guilliermondii yeast were used in the extraction procedures. The recovery yield data indicate that micelles having different composition give selective extraction of enzymes. The method can thus be used to optimize enzyme extraction processes. (c) 2007 Elsevier B.V. All rights reserved.

Coordination polymer adsorbent for matrix solid-phase dispersion extraction of pesticides during analysis of dehydrated Hyptis pectinata medicinal plant by GC/MS

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitoring pharmaceuticals photo-Fenton degradation process by using Solid Phase Extraction and liquid chromatography

The recovery of the pharmaceuticals bezafibrate and tetracycline from water was evaluated, using Solid Phase Extraction (SPE) with the aim of applying this technique to interrupt the pharmaceuticals' photodegradation by photo-Fenton process for further analysis. Sep-Pack C-18, Strata X, and Oasis HLB cartridges were evaluated. Oasis HLB showed the most satisfactory recovery and repeatability results: 98% (CV - 1%) for bezafibrate (20.0 mg L-1) and 76% (CV = 1%) for tetracycline (25.0 mg L-1). There was not a significant decrease in recovery at lower concentrations of the pharmaceuticals, and neither when present in Sewage Treatment Plant (STP) effluent matrix.

Determination of sugar cane herbicides in soil and soil treated with sugar cane vinasse by solid-phase extraction and HPLC-UV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determination of carbofuran and 3-hydroxycarbofuran residues in coconut water by solid-phase extraction and liquid chromatography with UV detection

A simple method was developed to determine carbofuran and 3-hydroxycarbofuran in coconut water. The procedure involved solid-phase extraction using C-18 cartridges with acetonitrile for elution. The analysis of these compounds was carried out by liquid chromatography with UV detection at 275 nm using a gradient solvent system. The method was validated with fortified samples at different concentration levels (0.01-2.5 mu g/mL). Average recoveries ranged from 81 to 95% with relative standard deviation between 1.6 and 12.5%. Each recovery analysis was repeated at least five times. Detection limits ranged from 0.008 to 0.01 mu g/mL. The analytical procedure was applied to coconut water samples from palms submitted to treatment with commercial formulation under field conditions.