Estudo preliminar do potencial de alguns asteroides

A survey we conducted, and bring expressed in this text is a preliminary study on the shape of asteroids and allowed us to understand a little more the dynamics around these bodies, in order that the images we have of asteroids are the most irregular possible. In this work, the asteroid is modeled by the method of the polyhedron, which provides a very good accuracy of the irregular shape of the body. Through study of models for non-spherical gravitational potential bodies, implementation of computational algorithms and numerical simulations a preliminary analysis was performed in relation to the shape of asteroids 4179 Toutatis, 6489 Golevka, 2063 Bacchus, 1620 Geographos and 1998 ML14, as well as regions of stability instability, we compute the coefficients of the gravitational potential. The work not only enables expansion for the case of asteroids, but also for other non-spherical bodies, contributing to the development of targeted studies the origin and evolution of the solar system, and perhaps the origin of the earth, and new technologies for modeling and mapping of non-spherical bodies. The main results were obtained by analyzing the graphics format and planning of asteroids, which confirmed how these bodies are irregular and show how distribution of non-homogeneous mass. Observe the behavior of the curves of zero velocity and equipotential curves as well as their respective surfaces. Also, compute some values of the gravitational potential and the spherical harmonic coefficients of each object. Furthermore, we find possible equilibrium points of asteroids except 4179 Toutatis, and analyze its stability

Estudo de impacto de ações de eficiência energética em instalações elétricas residenciais

This paper addresses methods of reducing the electric energy consumption on residences by the means of constructive measures and replacement of electric devices. Analyzing their impacts on residential and national level based on data issued by IBGE (Brazilian Institute of Geography and Statistics) and PROCEL (National Program for Electricity Conservation).

Sistema de automação residencial controlado via rede doméstica

The present work develops a residential automation system controlled by PIC microcontroller connected to a domestic network using the TCP/IP protocol. This was motivated by the viability of building an automation system to control basic elements of a house with low cost, which cannot be found nowadays. Initially is presented a brief history of the automation systems and an introduction about PIC microcontrollers. Afterwards is presented an overview of the system to be implemented. Then it is shown a suggested circuit and the sensor and actuator elements as well as the software to manage the system, this was all build and test in the laboratory. In the end are the results obtained from the prototype, like the energy consumption, the cost, efficiency and reliability

Experimentação no ensino de física: um estudo escolas estaduais na região de São José dos Campos

This work presents the results of a study on the use of experimentation in physics teaching, presenting a survey on the use of this strategy in public high schools in the region of São José dos Campos. Data collection was carried out in schools by means of questionnaires prepared for physics teachers and students from three grades of high school. Data were obtained in eighteen schools distributed in the city of São José dos Campos (two in the central region, in the west, three on the east side, seven in the north and five in the south), a school in the district of Sao Francisco Xavier and a school in the town of Monteiro Lobato. Thus, data from 20 schools, 610 students and 20 teachers were analyzed. Among the main results, we highlight that over 80% of the students said that there is no physics lab at the school where they study, and less than 1% declares that uses laboratory weekly. We note that there is a laboratory in 25% of the schools in the northern region and 10% or less of the other schools. According to the students the proposition of the experimental activities by teachers is rare - only three schools in East Side the options sometimes and always exceeded the number of responses experimental activities are never proposed. We had 60% of the teachers who reported using the curriculum of the state of São Paulo to propose activities to students, and half of the teachers said they did not have classes experimental physics classes in initial training or had them in sufficient quantity to support the use of this feature in practice

Campesinato e agrohidronegócio canavieiro no Pontal do Paranapanema: os desafios para a transição agroecológica

This paper appears in order to promote a discussion on the use and ways of working with the land. For this, we present a scenario of conflict initiated in Pontal do Parananema, São Paulo, Brazil, between the peasantry and the agrohidronegócio. The Pontal is a territory marked by agrarian and land conflicts, originated by the illegal occupation of land by the squatters, the decimation / expropriation of indigenous, and deforestation and environmental devastation. This conflict is represented today by the sugarcane agro-industrial capital companies on one side, and the other peasants. The expansion occurs agrohidronegócio strongly from 2005, due mainly to the change in the energy matrix of the country and state incentives with strong momentum in the production of flex-fuel vehicles. Rural agrarian reform settlements, made possible by the state under pressure from social movements, are spatialized in 16 municipalities with a total of 112 settlements, occupying an area of 139. 682 hectares, seating 5. 892 families. These families have seen their possibilities of social reproduction increasingly suppressed by the advance of sugarcane agrohidronegócio in the region, which suffocates the living spaces and work of these peasants. Front of it, agroecology is an alternative for these workers to ensure their reproductive possibilities. Agroecology also arises as a means of confronting agribusiness model, adding elements to the environment, such as the eradication of the use of pesticides and considering the dynamics of nature to promote agriculture, and social order, contributing food sovereignty and the production of healthy food and diversity to the population...

Análise da frequência de micronúcleos frente á utilização de colutório bucal com base alcoólica em indivíduos fumantes e não fumantes

Micronuclei (MN) originate from chromosome fragments or whole chromosomes that lag behind at anaphase during cell division can occur due to excessive exposure to harmful agents, defects in mitosis and / or DNA repair process. The study evaluated the frequency of micronuclei in cytological samples after daily use of alcohol -based mouthwash mouth in smokers and non-smokers. We assessed 30 subjects, aged between 17-42 years and established as exclusion criteria: alcohol consumption; periodontal disease; systemic diseases that may interfere with the integrity of the oral mucosa; individuals with medical or pharmacological history that affect the performance of the study, family history of malignancies. For smokers the inclusion criterion was a minimum consumption of 20 cigarettes / day, and the contrast required for non-smokers. The sample was divided into 02 experimental groups: Group 1 Smokers and Group 2 Non-Smokers, both groups performed mouthwash (alcohol 21,6%) with Listerine® Defense of Teeth and Gums for 04 weeks cytological collection were performed on buccal mucosa and portion median border of the tongue, one for initial, week 0 control, and subsequent three weeks with continued use of mouthwash. The collected material was stained by specific staining Feulgen / Fast Green. The analysis of 3000 cells / individual was performed by light microscopy statistics used Kruskal- Wallis and Mann-Whitney tests for frequency MN. The frequency of micronuclei in buccal mucosa was 1.6 ± 1.75 and 1.46 ± 2.06 for the site language to Group 1 Smokers of showing a slight increase compared with Group 2 Non-smoking, which showed a variation of 1.2 ± 1.53 for the buccal mucosa site and 0.86 ± 1.41 for the site language. However, this difference was not statistically significant. The results suggest that alcohol-based mouthwash tested is not an inducer of genotoxic changes, thus not changing the frequency...

Dispositivo de microdescargas em gases na pressão atmosférica

Neste trabalho foi desenvolvido um dispositivo de microdescargas em gases à pressão atmosférica para geração de plasma a fim de ser utilizado no tratamento de superfícies. O trabalho foi baseado em um estudo de iniciação científica que aconteceu em duas etapas. Na introdução apresentam-se as motivações do estudo, o dispositivo desenvolvido na primeira etapa do trabalho bem como os primeiros resultados e propostas de melhorias. Definem-se os objetivos da segunda etapa, que contemplam modificações no dispositivo de descarga e na fonte de alimentação. Em seguida são explanados os métodos utilizados para confecção do dispositivo, construção da fonte de alimentação e circuito de fotodetecção para observar as descargas. Apresenta-se o modelo e configurações dos experimentos, os resultados obtidos são expostos e debatidos brevemente. Colocam-se as conclusões do trabalho e novas propostas de investigação e melhoramentos para o estudo das microdescargas. Seguem-se os agradecimentos aos envolvidos no projeto e, por fim, a bibliografia utilizada

A multiplicidade poética de Emílio Moura: o encanto da hora amarga

The modernist poet Emílio Moura (1902-1971) incorporates a strictly modern language regarding the imagistic suggesting a mainly poetry metalinguistic. That way, from the works Canto da hora amarga (1932) and Cancioneiro (1944) we attest, through the poetic analysis, that modernity Moura’s poetry takes place in confluences with ideas ranging from biblical tradition and come to the depersonalization of the modern I and questing. We objectify, therefore, demonstrate and explore the metalinguistic and intertextual character that results in the personification of poetry, as clarified muse. To achieve this, this same poetry undergoes a dualistic and pessimistic sentiment, baroque, the I that is divided into life and death, light and shadow; goes through a romantic feeling of anguish and desolation and reaches the multiplicity of the poetic speaker, which promotes a constant struggle with the language. More than draw a correlation between classical and modern ideas (in the sense that the poet creates depersonalization and appropriates of free, short prose or verse, typical of modernism), intend to supply, at least in part, the dearth of studies on the miner poet who has found fertile ground to question and analyze internally the role of poetry in the multiplicity of man and modern society to therefore conclude that universalism the Emílio Moura becomes distinctive and mature. Thus, we will check how poetic inflows corroborate both works for reevaluation and critical insertion of poetic the Emílio Moura in the context of modern/Modernist Brazilian literature

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Imagens de satélite na análise da relação entre queimadas, aerossóis atmosféricos e precipitação

The direct and indirect effects of atmospheric aerossols in the amazonic climate have been focus of many published. This work aims to analyze a possible relation among Burns, atmospheric aerossols and precipitation above South America. It uses the avaluable data from the satellites AQUA/TERRA and TRMM and the images furnished by NOAA and GOES. These analysis can provide some explanations about the effects of emission of aerosols by burns on the composition of atmosphere and cloud formation, mainly in Amazon. We use the Aerosol Optical Depth (AOD) from MODIS/TERRA-AQUA, burns index from CPTEC and rain rate from TRMM. The data we use were obtained from 2000 until 2012. The study is divided in two parts. In the first one, it was performed a quantitative analysis between number of burns and aerosols emission. It was identified a great variability in space and time of the AOD on South America. On the north, northeast and center-west, the AOD is significant during the winter period, with peak on August and September. The southeast is affected by aerosols from center-west due to the dynamical transport. In the second part, it was evaluated the relation between AOD and precipitation in a 13-year period. The statistical analysis shows up a negative correlation of 0.72 between August and October, on Legal Amazon. These result indicate an inverse relation between AOD and rain rate. The other months present not significant correlation. These results are in a good agreement with the literature, in which in-situ methods were applied or combined with satellites data. The increasing of aerosols concentration in the atmosphere are reinforced during drier years. It can affect the increasing process of water drops, decreasing the precipitation. We also verified higher values of AOD (0.25 - 0.3) during years with El Niño, than the climatologically average (~0.15 - 0.2), ... (Complete abstract click electronic access below)

Projeto e concepção de um quadcopter utilizando o controle PID

The present work refers to the design, conception and development of a quadcopter based on PID controllers, a widespread microcontroller on the market was being implemented, the Arduino. Also made use of LabVIEW programming tool from National Instruments company for the quadcopter control and telemetry. For the control, LabVIEW software acquired the joystick commands, making the necessary adjustments to the perfect interpretation by microcontroller on the quadcopter and adjusts the parameters of PID controllers. For telemetry, data relating to quadcopter behavior are received, interpreted and presented in an intuitive user interface. In the first part of this graduate work presents the theoretical background on the subject, with a brief history about the quadcopters, followed by the main projects in the academic and commercial matters. Also are presented the theories of communications used in the design and PID control. Then an overview of the dynamic and mathematical model is demonstrated. Having done this, the physical and computer components required to complete the project are showed and the results are achieved consequently. Finally, a conclusion is made taking into account the results obtained. In this work will be presented the PID control of quadcopter translational movements only to roll and pitch movements

Telemetria automotiva usando módulo de transmissão Wireless Zigbee

This paper presents a design and construct the system of data acquisition with wireless transmission of some important parameters like motor temperature, motor rotation and velocity of Unesp Racing´s formula car prototype from Universidade Estadual Paulista, Campus Guaratinguetá. This system development presents a contribution for the electrical technical features adding important points in the competition due car´s electric, in addition, enables preventive maintenance and fine adjustment of the car with the data obtained during training and racing

Resolução do problema de sequenciamento de múltiplas linhas de montagem de modelos mistos em ambiente de produção enxuta

This work deals with the sequencing of Multi-Mixed-Model Assembly Lines in a lean manufacturing environment, where an operational structure where several kanbans support several mixed-model assembly lines, so that all assembly lines can receive parts or sub-assemblies from all suppliers. To optimize this system, the sequencing seeks to minimize the distance between the real consumption and the constant ideal consumption of parts or subassemblies, thereby reducing the scaling of kanbans and intermediate stocks. To solve the sequencing problems, the method Clustering Search was applied along with the metaheuristics Variable Neighborhood Search, Simulation Annealing and Iterative Local Search. Instances from the literature and generated instances were tested, thus allowing comparing the methods to each other and with other methods presented in the literature. The performance of the Clustering Search with Iterated Local Search stands out by the quality and robustness of their solutions, and mainly for its efficiency, whereas it converges to better results at a lower computational cost

Desenvolvimento do PFMEA para uma linha de montagem de motores

In modern days is not practicable to link productivity and profitability without discuss the manufactured products quality. It is of great importance, mainly if the company is looking for a Global Class title, both the product and the process in what it is been fabricated, to attend all the high level quality requirements. This work aims to define the necessary steps for implementing a new project, including the initial viability studies, and then the staff approval, passing through the development of tools and documents necessary to its fabrication, purchasing goods and services to build the installation, and the final stage of implementation, focused on the manufacturing process quality. It will be highlighted a quality tool that helps do decrease the process risks and thereafter increase its reliability after the implementation

Elementos de manutenção de transformadores de potência

The intended purpose of this paper is to present the main commissioning tests for power transformers and the most used techniques in industrial segment, it is also discussed your results and consequences in the equipment’s normal operation. Also in this text, it is given specific information concerning a maintenance plan compatible to power transformers, with elements of preventive and predictive maintenance, exposing essential components, tests and the regulations current, showing how analyze and interpreted the results from this maintenance resources. Also in this paper is submitted the economic impact of damage to transformers and how the correct maintenance method can minimize them. The objective of this text is demonstrate the importance of the equipment and the benefits of proper maintenance, much of in financial terms as in electric system reliability