958 resultados para Estudo dos métodos e tempos
Resumo:
The green bean has organoleptic and nutritional characteristics that make it an important food source in tropical regions such as the Northeast of Brazil. It is a cheap source of protein and important for nutrition of rural population contributing significantly in subsistence farming of the families from Brazil s northeast. It is consumed in entire region and together with the dry meat and other products composes the menu of typical restaurants, being characterized as an important product for economy of Northeast. The green bean is consumed freshly harvested and has short cycle, being characterized as a very perishable food, which hampers your market. The drying method is an alternative to increase the lifetime and provide a reduction volume of this product making easier your transportation and storage. However is necessary to search ways of drying which keep the product quality not only from the nutritional standpoint but also organoleptic. Some characteristics may change with the drying process such as the coloring, the rehydration capacity and the grains cooking time. The decrease of drying time or of exposure of the grains to high temperature minimizes the effects related with the product quality loss. Among the techniques used to reduce the drying time and improve some characteristics of the product, stands out the osmotic dehydration, widely used in combined processes such as the pretreatment in drying food. Currently the use of the microwaves has been considered an alternative for drying food. The microwave energy generates heat inside of materials processed and the heating is practically instantaneous, resulting in shorter processing times and product quality higher to that obtained by conventional methods. Considering the importance of the green beans for the Northeast region, the wastefulness of production due to seasonality of the crop and your high perishability, the proposal of this thesis is the study of drying grain by microwaves with and without osmotic pretreatment, focusing on the search of conditions of processes which favor the rehydration of the product preserving your organoleptic characteristics. Based on the analysis of the results of osmotic dehydration and dielectric properties was defined the operating condition to be used in pretreatment of the green bean, with osmotic concentration in saline solution containing 12,5% of sodium chloride, at 40°C for 20 minutes. The drying of green bean by microwave was performed with and without osmotic pretreatment on the optimized condition. The osmotic predehydration favored the additional drying, reducing the process time. The rehydration of dehydrated green bean with and without osmotic pretreatment was accomplished in different temperature conditions and immersion time according to a factorial design 22, with 3 repetitions at the central point. According to results the better condition was obtained with the osmotically pretreated bean and rehydrated at a temperature of 60°C for 90 minutes. Sensory analysis was performed comparing the sample of the green bean in natura and rehydrated in optimized conditions, with and without osmotic pretreatment. All samples showed a good acceptance rate regarding the analyzed attributes (appearance, texture, color, odor and taste), with all values above 70%. Is possible conclude that the drying of green bean by microwave with osmotic pretreatment is feasible both in respect to technical aspects and rehydration rates and sensory quality of the product
Resumo:
In the fields of Machine Vision and Photogrammetry, extracted straight lines from digital images can be used either as vector elements of a digital representation or as control entities that allow the determination of the camera interior and exterior orientation parameters. Applications related with image orientation require feature extraction with subpixel precision, to guarantee the reliability of the estimated parameters. This paper presents three approaches for straight line extraction with subpixel precision. The first approach considers the subpixel refinement based on the weighted average of subpixel positions calculated on the direction perpendicular to the segmented straight line. In the second approach, a parabolic function is adjusted to the grey level profile of neighboring pixels in a perpendicular direction to the segmented line, followed by an interpolation of this model to estimate subpixel coordinates of the line center. In the third approach, the subpixel refinement is performed with a parabolic surface adjustment to the grey level values of neighboring pixels around the segmented line. The intersection of this surface with a normal plane to the line direction generates a parabolic equation that allows estimating the subpixel coordinates of the point in the straight line, assuming that this is the critical point of this function. Three experiments with real images were made and the approach based on parabolic surface adjustment has presented better results.
Resumo:
The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas
Resumo:
The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas
Resumo:
CONTEXTO: A cirurgia videolaparoscópica (CVL) vem evoluindo como alternativa cirúrgica menos invasiva para o tratamento da doença aterosclerótica oclusiva aorto-ilíaca e do aneurisma da aorta abdominal. Poucos estudos avaliaram objetivamente a curva de aprendizado com essa técnica em cirurgia vascular. OBJETIVO: Avaliar objetivamente os tempos e a evolução de cada passo cirúrgico e demonstrar a exeqüibilidade dessa técnica. MÉTODOS: Entre outubro 2007 e janeiro de 2008, dois cirurgiões vasculares iniciantes na CVL operaram, após cursos e treinamentos, seis porcos consecutivos, com dissecção aórtica e interposição de um enxerto de dácron em um segmento da aorta infra-renal abdominal, com técnica totalmente laparoscópica. RESULTADOS: Todos os tempos cirúrgicos foram decrescentes ao longo do estudo, apresentando redução de 45,9% no tempo total de cirurgia, 85,8% no tempo de dissecção da aorta, 81,2% na exposição da aorta, 55,1% no clampeamento total, 71% na confecção da anastomose proximal e 64,9% na anastomose distal. CONCLUSÃO: O presente estudo mostrou que os resultados técnicos satisfatórios da CVL vascular ocorreram somente após longa curva de aprendizado, que foi decrescente ao longo do tempo, à medida que aumentou a experiência e vivência com os materiais e com a visão não-estereoscópica. Essa técnica pode ser realizada com perfeição por cirurgiões vasculares desde que façam cursos especializados, com treinamento em simuladores e animais, e desde que busquem constante aprimoramento a fim de conseguir resultados similares aos obtidos com a cirurgia convencional.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The monitoring of Earth dam makes use of visual inspection and instrumentation to identify and characterize the deterioration that compromises the security of earth dams and associated structures. The visual inspection is subjective and can lead to misinterpretation or omission of important information and, some problems are detected too late. The instrumentation are efficient but certain technical or operational issues can cause restrictions. Thereby, visual inspections and instrumentation can lead to a lack of information. Geophysics offers consolidated, low-cost methods that are non-invasive, non-destructive and low cost. They have a strong potential and can be used assisting instrumentation. In the case that a visual inspection and strumentation does not provide all the necessary information, geophysical methods would provide more complete and relevant information. In order to test these theories, geophysical acquisitions were performed using Georadar (GPR), Electric resistivity, Seismic refraction, and Refraction Microtremor (ReMi) on the dike of the dam in Sant Llorenç de Montgai, located in the province of Lleida, 145 km from Barcelona, Catalonia. The results confirmed that the geophysical methods used each responded satisfactorily to the conditions of the earth dike, the anomalies present and the geological features found, such as alluvium and carbonate and evaporite rocks. It has also been confirmed that these methods, when used in an integrated manner, are able to reduce the ambiguities in individual interpretations. They facilitate improved imaging of the interior dikes and of major geological features, thus inspecting the massif and its foundation. Consequently, the results obtained in this study demonstrated that these geophysical methods are sufficiently effective for inspecting earth dams and they are an important tool in the instrumentation and visual inspection of the security of the dams
Resumo:
INTRODUÇÃO: A hiperexpressão de human epidermal growth factor receptor (HER-2/neu) e a amplificação do seu gene são indicadores de formas mais agressivas do câncer de mama. A Food and Drug Administration (FDA) aprovou o teste denominado HercepTest® com a finalidade de selecionar pacientes com indicação para o uso de um anticorpo humanizado anti-HER-2/neu (trastuzumab), com efeito terapêutico comprovado. OBJETIVOS: O presente trabalho tem como objetivo comparar os resultados obtidos pelos métodos imuno-histoquímicos LSAB®+ com a utilização de anticorpo A0485 e HercepTest®. Material e métodos: Foram utilizados 50 casos de carcinoma de mama nos quais a pesquisa da hiperexpressão de HER-2 pelo método LSAB®+ já havia sido realizada. Foi repetida a pesquisa da hiperexpessão de HER-2/neu nos mesmos casos, utilizando-se o método do HercepTest®. RESULTADOS: 34 casos foram considerados negativos pelos dois métodos, com escore 0 pelo método HercepTest®. Destes, 12 obtiveram escore 1+ e 22 obtiveram escore 0 pelo método LSAB®+. em oito casos, o escore foi 2+ pelos dois métodos. Escore 3+ foi encontrado também em oito casos pelos dois métodos. DISCUSSÃO: O método mais prático utilizado em laboratório de rotina diagnóstica para investigar a hiperexpressão de HER-2/neu é o estudo imuno-histoquímico. em função de muitas variáveis, como tempo de fixação, tipo de fixador, duração da fixação, método de recuperação antigênica e tipo de anticorpo utilizado, pode haver divergência de resultados. CONCLUSÃO: O presente estudo concluiu que o método HercepTest®demonstrou resultados equivalentes aos resultados obtidos pelo método LSAB®+ em carcinoma de mama.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The authors studied the lateral positional desviations of the mandible, in relation to the facial median line in 30 (thirty) full edentulous patients, with the purpose to verify the influence of the unstrained guided (chinpoint guidance) and deglutition methods for the determination of centric relation. According the results obtained they conclude that the unstrained guided method produced a mandibular lateral desviation with a mean value of the 0.752 mm and in the deglutition method the mean value observed was 1.109 mm. The statistical analysis of the results revealed for the unstrained guided method a proportion of the points to the right and left of the median line not statistically significant, while for the deglutition method the difference was statistically significant at a level of 5%.
Resumo:
The chronology of the wound healing process following tooth extraction was studied by means of two kinds of histological cuts. Two groups of 42 albino rats were employed. In the first one, the sockets were cut in a transversal way. In the second one the cuts were performed in a longitudinal way. The rats were sacrificed after 3, 6, 9, 15, 21, 24, and 28 days following the surgeries. After laboratorial outline the obtained pieces were stained by hematoxylin and eosin for histological purposes. It way be concluded that: 1. The results got from longitudinal cuts were in agreement to those described by other authors; 2. The transversal cuts allow us to detect intensive resorption of the lateral alveolar wall at the cervical thirs; 3. On the 21st day following dental extraction the incisor socket of the rat shows a great deal of areas not ossified; 4. The healing process of dental extraction wounds of the upper incisor of the rat is completed between 24 and 28 post operative days.
Resumo:
BACKGROUND: Ultrasonography (US), Computed Tomography (CT), and Magnetic Resonance imaging (MR) were compared for the staging of renal tumors. The differences between these imaging techniques were also studied for their ability to detect adenopathies, vascular invasion, distant intra-abdominal metastases, and particularly adjacent organ invasion. METHODS: Thirty-one patients with solid or complex renal masses were prospectively studied using US, CT, and MR. Differences between the results obtained were studied using the COCHRAN G test and the McNEMAR test. The sensitivity and specificity of each diagnostic technique were compared against a gold standard of the surgical and histopathological findings. RESULTS: The following sensitivities were obtained: For the detection of adenopathy, US 63.6%, CT and MR 90.9%. For vascular invasion, US 42.8%, CT and MR 85.7%. For the adjacent organ invasion, US 28.5%, CT 85.7%, and MR 71.4%. Some of the criteria that suggest invasion of adjacent structures include: the envelopment of the adjacent structures by the tumor, tumor extension into the adjacent structures with an irregular appearance, and alterations in shape, size, and density of adjacent structures. Loss of fat planes between the tumor and adjacent structures is not a sign of tumor invasion. CONCLUSIONS: Significant differences were found in the detection capacity of US in relation to CT and MR, which were similar. All three techniques were highly sensitive and specific only in the detection of distant abdominal metastases. In addition to the accuracy of these diagnostic modalities for the detection and staging of tumors, invasiveness, risks and cost should be considered in relation to relative costs and benefits.