290 resultados para Estrelas: Lítio


Relevância:

20.00% 20.00%

Publicador:

Resumo:

O trabalho analisa a expedição astronômica realizada pela Marinha norteamericana ao Chile, durante os anos de 1849 a 1852, comandada pelo oficial e também astrônomo James Melville Gilliss. O objetivo foi compreender os interesses científicos, políticos, geopolíticos e comerciais que motivaram a viagem, bem como as imagens e representações sobre a América do Sul, especialmente do Panamá, Peru, Chile e Argentina, construídas e divulgadas através do relatório oficial da expedição, com o título \"The U.S. Naval Astronomical Expedition to the Southern Hemisphere during the years (1849- 1852). Esta pesquisa também procura examinar os diferentes dispositivos discursivos utilizados pelos oficiais que escreveram o relatório, James Gilliss e Archibald MacRae, discutindo dissensões e diferentes visões sobre o modo de veicular dados científicos, e também modos distintos de relatar a América do Sul.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Debris discs are commonly detected orbiting main-sequence stars, but little is known regarding their fate as stars evolve along subgiant and giant stages. Jones (2008) has found strong evidence on the presence of mid-IR excess in G and K stars of luminosity class III, using photometric data from the Two-Micron All-Sky Survey (2MASS) and GLIMPSE catalogues. While the origin of these excesses remains uncertain, it is plausible that they arise from debris discs around these stars. The present study brings an unprecedent survey in the search for mid-IR excess among single and binary F, G and K-type evolved stars of luminosity classes IV, III, II and Ib. For this study, we use WISE and 2MASS photometric data for a sample of 3000 evolved stars, complete up to visual magnitude of 6.5. As major results, we found that the frequency of evolved stars showing mid-IR WISE excess increases from the luminosity classes IV and III to luminosity classes II and Ib. In addition, there is no clear difference between the presence of IR excess in binary and single stars for all the analyzed luminosity classes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Debris discs are commonly detected orbiting main-sequence stars, but little is known regarding their fate as stars evolve along subgiant and giant stages. Jones (2008) has found strong evidence on the presence of mid-IR excess in G and K stars of luminosity class III, using photometric data from the Two-Micron All-Sky Survey (2MASS) and GLIMPSE catalogues. While the origin of these excesses remains uncertain, it is plausible that they arise from debris discs around these stars. The present study brings an unprecedent survey in the search for mid-IR excess among single and binary F, G and K-type evolved stars of luminosity classes IV, III, II and Ib. For this study, we use WISE and 2MASS photometric data for a sample of 3000 evolved stars, complete up to visual magnitude of 6.5. As major results, we found that the frequency of evolved stars showing mid-IR WISE excess increases from the luminosity classes IV and III to luminosity classes II and Ib. In addition, there is no clear difference between the presence of IR excess in binary and single stars for all the analyzed luminosity classes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The recycling of metals from secondary sources can be advantageous. Among the metals of interest, we have cobalt, a metal used for various purposes. As regards the secondary sources of cobalt, the lithium-ion batteries can be considered, since they contain cobalt oxide in their composition (LiCoO2). This way, the objective of this work was to use the microorganism strains (Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans) to bioleach the LiCoO2 extracted from discarded lithium ion batteries with emphasis on the recovery of cobalt for synthesis of new materials of interest. The lineage growth occurred in T&K medium and the growth investigation was made by observing the media, by platelet growth and microscope analysis. Then, the inoculum was standardized on 5 x 106 cells mL-1 and used in bioleaching tests. The bioleaching was investigated: the microorganism nature: separate strains and A. ferrooxidans and A. thiooxidans consortium, bioleaching time (0 to 40 days), inoculum proportion (5 to 50% v/v), energy source (iron and sulfur) and residue concentration (1063 to 8500 mg L-1 of cobalt). The cobalt concentration in the media was found by atomic absorption spectrometry and the medium pH was monitored during the bioleaching. The results show that the amount of bioleached cobalt increases with time and the iron concentration. The bioleaching with A. thiooxidans was not influenced by the addition of sulfur. The use of the two lineages together did not improve the bioleaching rates. Among the lineages, the A. thiooxidans presented better results and was able to bioleach cobalt amounts above 50% in most of the experiments. A. thiooxidans presented lower bioleaching rates, with a maximum of 50% after 24 days of experiment. After reprocessing by bioleaching, the cobalt in solution was used for synthesis of new materials: such as LiCoO2 cathode and as adsorbent pesticide double lamellar hydroxide (HDL Co-Al-Cl) by the Pechini and co-precipitation methods. The reprocessed LiCoO2 presented a unique stoichiometric phase relative to the HT-LiCoO2 structure similar to the JCPDS 44-0145, presenting electrochemical activity when tested as a cathode material. The double lamellar hydroxide Co-Al-Cl was tested as pesticide adsorbent, being possible to adsorb around 100% of the pesticide. The bioleaching was efficient in the recovery of cobalt present in lithium-ion batteries and microorganisms presented high tolerance to the residue, being able to bioleach even at higher LiCoO2 concentrations. The cobalt bioleaching medium did not impair the synthesis phases and the obtained materials presented structure and activity similar to the sintered materials from the reagents containing cobalt.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A utilização da internet para efetuar reservas on-line de alojamento no setor hoteleiro, tem um peso cada vez maior no conjunto das reservas efetuadas. É por isso, necessário que sejam elaborados estudos que permitam perceber a evolução dos preços oferecidos ao cliente, ao longo do tempo, nos diversos sites de reserva on-line e no site do próprio hotel, para que quer os clientes quer os gestores possuam informação rigorosa que lhes permita tomar decisões e elaborar estratégias eficazes. Nesta investigação, apresentar-se-á a evolução dos preços médios dos hotéis em estudo, obtida a partir da consulta de um conjunto de sites de reserva on-line que previamente se definiram e do site institucional, consulta efetuada ao longo dos dois períodos de doze dias que antecederam a época festiva da Páscoa e uma época não festiva. A investigação empírica efetuada, neste trabalho, foi realizada com base num estudo de caso exploratório, tendo como objeto de estudo os hotéis de 5 estrelas do concelho de Lisboa, tendo em conta os dados secundários disponíveis. O recurso ao estudo de caso permitiu delimitar de modo preciso o contexto desta investigação. A opção pelo tipo de pesquisa exploratória teve em conta o facto de se conhecer pouca bibliografia científica disponível sobre a temática em estudo. Os resultados obtidos permitiram perceber qual foi a evolução dos preços ao longo do período de consulta para a época festiva da Páscoa e para a época não festiva, possibilitando depois fazer a comparação da evolução dos preços entre as duas épocas. Da análise dos dados pôde ainda perceber-se se havia concertação entre os vários meios de reserva consultados, ou seja, entre os sites de reserve on-line considerados e o site institucional. Tomando por base os hotéis que durante os períodos de consulta foram esgotando pode, ainda, observar-se o comportamento dos preços médios em relação à variação da oferta disponível.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente relatório tem como principal objetivo a descrição, explanação e análise das operações do Vila Galé Marés, resort 5 estrelas na Bahia – Brasil, no âmbito do estágio curricular de nove meses do último ano do mestrado de Gestão e Direção Hoteleira. No desenrolar do relatório, com base na observação participante, são enumeradas e descritas as principais tarefas realizadas em 9 departamentos, sendo o último referente ao acompanhamento e participação da gestão do hotel. Sobre cada um é feita uma análise crítica e sobre todos uma análise geral conclusiva. Com base na observação participante, são sugeridas soluções para os principais problemas com que me deparei na realização do estágio e que se enquadram nos desafios apresentados no 3º Capítulo: Formação de Colaboradores e Controlo de Consumos e Custos de F&B. De um lado, a realidade de qualificação e formação insuficientes que nem sempre conseguem cumprir uma relação positiva entre as expetativas dos clientes e o real serviço prestado. Este problema agrava-se não só pela elevada rotatividade dos recursos humanos como também pelo constante recurso a trabalhadores temporários. Por outro lado, elevadas ocupações ao longo de todo ano em regime all inclusive implica a preparação e confeção de grande volume de alimentos que atendam todos os clientes em todas as refeições. Isto acarreta custos significativos, não só pela matéria-prima como pelo desperdício, proveniente tanto do excesso dos hóspedes como das decisões e operações a que é sujeito até chegar à disposição deste.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

De forma a completar as necessidades estéticas, que são cada vez mais exigidas pela sociedade, as cerâmicas dentárias têm apresentado rápida evolução com o intuito de melhorar as suas propriedades físicas e mecânicas, como também óticas. O desenvolvimento de novos materiais permitiu a aplicação e o progresso dos sistemas totalmente cerâmicos utilizados na área da medicina dentária. Pelas suas características estéticas relativamente aos sistemas metalocerâmicos, rapidamente os sistemas totalmente cerâmicos ocuparam o seu lugar no mercado, levando à atenção de médicos dentistas, como dos próprios pacientes. Dentro destes sistemas totalmente cerâmicos, encontra-se a cerâmica reforçada com dissilicato de lítio. Esta revisão narrativa da literatura teve como objetivo descrever as características da cerâmica dissilicato de lítio de forma a tornar possível compreender em que situações clinicas poderá ser utilizada, bem como, de que forma é possível otimizar os processos laboratoriais. Para tal, foram utilizadas várias bases de dados, Pubmed, Scielo, JADA, e Science Direct, utilizando como palavras-chave: “Ceramic”, “Dental Ceramic” “Porcelain”, “Lithium Dissilicate”; “IPS e.max

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cellulose acetates with different degrees of substitution (DS, from 0.6 to 1.9) were prepared from previously mercerized linter cellulose, in a homogeneous medium, using N,N-dimethylacetamide/lithium chloride as a solvent system. The influence of different degrees of substitution on the properties of cellulose acetates was investigated using thermogravimetric analyses (TGA). Quantitative methods were applied to the thermogravimetric curves in order to determine the apparent activation energy (Ea) related to the thermal decomposition of untreated and mercerized celluloses and cellulose acetates. Ea values were calculated using Broido's method and considering dynamic conditions. Ea values of 158 and 187 kJ mol-1 were obtained for untreated and mercerized cellulose, respectively. A previous study showed that C6OH is the most reactive site for acetylation, probably due to the steric hindrance of C2 and C3. The C6OH takes part in the first step of cellulose decomposition, leading to the formation of levoglucosan and, when it is changed to C6OCOCH3, the results indicate that the mechanism of thermal decomposition changes to one with a lower Ea. A linear correlation between Ea and the DS of the acetates prepared in the present work was identified.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Celulose de linter foi acetilada, visando obter acetatos de celulose com diferentes Graus de Substituição (GS) em meio homogêneo, usando cloreto de lítio/N,N-dimetilacetamida (LiCl/DMAc) como sistema de solvente, e anidrido acético como reagente acetilante. A agregação entre cadeias de celulose ou acetatos de celulose (GS 0,8, 1,5 e 2,0) em solução foi avaliada através de medidas viscosimétricas. Os resultados mostraram que a formação de agregados no sistema de solvente utilizado (LiCl/DMAc) é diferente para celulose e acetatos, e dependente da temperatura e do GS, no caso dos acetatos. Este trabalho corresponde à primeira etapa de um estudo em que se pretende preparar filmes de acetatos, assim como de acetatos reforçados com celulose, diretamente a partir de soluções destes em LiCl/DMAc. Os resultados apresentados permitem uma escolha melhor embasada do intervalo de concentração mais adequado para preparação de filmes, a partir de soluções de acetatos e celulose nesse sistema de solvente.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A homoenolate generated by tellurium/lithium exchange reaction was employed in a straightforward enantioselective synthesis of (+)-endo-brevicomin in 70% yield and 84.4% e.e.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We propose new theoretical models, which generalize the classical Avrami-Nakamura models. These models are suitable to describe the kinetics of nucleation and growth in transient regime, and/or with overlapping of nucleation and growth. Simulations and predictions were performed for lithium disilicate based on data reported in the literature. One re-examined the limitations of the models currently used to interpret DTA or DSC results, and to extract the relevant kinetic parameters. Glasses and glass-ceramics with molar formulation 0.45SiO2? (0.45-x)MgO?xK2O?0.1(3CaO.P2O5) (0?x?0.090) were prepared, crystallized and studied as potential materials for biomedical applications. Substitution of K+ for Mg2+ were used to prevent devritification on cooling, to adjust the kinetics of crystallization and to modify the in vitro behaviour of resulting biomaterials. The crystallization of the glass frits was studied by DTA, XRD and SEM. Exothermic peaks were detected corresponding to bulk crystallization of whitlockite-type phosphate, Ca9MgK(PO4)7, at approximately 900ºC, and surface crystallization of a predominant forsterite phase (Mg2SiO4) at higher temperatures. XRD also revealed the presence of diopside (CaMgSi2O6 in some samples. The predominant microstructure of the phosphate phase is of the plate-type, seemingly crystallizing by a 2-dimensional growth mechanism. Impedance spectroscopy revealed significant changes in electrical behaviour, associated to crystallization of the phosphate phase. This showed that electrical measurements can be used to study the kinetics of crystallization for cases when DTA or DSC experiments reveal limitations, and to extract estimates of relevant parameters from the dependence of crystallization peak temperature, and its width at half height. In vitro studies of glasses and glass-ceramics in acelular SBF media showed bioactivity and the development of apatite layers The morphology, composition and adhesion of the apatite layer could be changed by substitution of Mg2+ by K+. Apatite layers were deposited on the surface of glass-ceramics of the nominal compositions with x=0 and 0.09, in contact with SBF at 37ºC. The adhesion of the apatite layer was quantified by the scratch test technique, having been related with SBF?s immersion time, with composition and structure of the glass phase, and with the morphology of the crystalline phase of the glass-ceramics. The structure of three glasses (x=0, 0.045 and 0.090) were investigated by MAS-NMR ( 29Si and 31P), showing that the fraction of Q3 structural units increases with the contents of Mg, and that the structure of these glasses includes orthophosphate groups (PO43-) preferentially connected to Ca2+ ions. Mg2+ ions show preference towards the silicate network. Substitution of Mg2+ by K+ allowed one to change the bioactivity. FTIR data revealed octacalcium phosphate precipitation (Ca8H2(PO4)6.5H2O) in the glass without K, while the morphology of the layer acquires the shape of partially superimposed hemispheres, spread over the surface. The glasses with K present a layer of acicular hidroxyapatite, whose crystallinity and needles thickness tend to increase along with K content.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objectivo deste trabalho consistiu na síntese de novos complexos de rénio com ligandos solúveis em água. Para tal, utilizaram-se os materiais de partida [ReCl2{η1-N-N2C(O)Ph}(PPh3)2] e Re2O7 e os compostos solúveis em água ( e relacionáveis) 1, 3, 5-triazo-fosfaadamantano (PTA), iodeto de 1-metil-1, 3, 5 -triazo-7-fosfaadamantano ([Me-PTA]I), hexametilenotetraamina (HMT), hidrotris(1-pirazolil)metano (Tpm), hidrotris(3, 5-dimetil-1-pirazolil)metano (TpmMe) e tris(1-pirazolil)metanossulfonato de lítio (LiTpms). Como resulrado, conseguiu-se sintetizar o complexo de rénio [ReCl2{η1-N-N2C(O)Ph}(PTA)3] contendo moléculas de PTA coordenadas de modos diferentes, ou seja, coordenam-se duas moléculas pelo átomo de azoto e uma pelo átomo de fósforo. Este aparente ser o primeiro complexo de rénio a apresentar este tipo de coordenação. Para além deste complexo, conseguiram-se sintetizar também vários complexos derivados de Re2O7, incorporando os ligandos acima mencionados, em diferentes combinações. Todos os complexos foram caracterizados por Espectroscopias de Radiação Infravermelha e de Ressonância Magnética Nuclear, por Análise Elementar, Voltametria Cíclica e Electrólise a Potencial Controlado. Estudou-se a actividade catalítica de todos os complexos sintetizados na oxidação peroxidativa do ciclo-hexano a ciclo-hexanol e ciclo-hexanona, em condições suaves. Os resultados obtidos são promissores, na medida em que os complexos aparentam ser bastante selectivos relativamente à obtenção de ciclo-hexanona.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nos dias que correm questões ambientais e considerações energéticas obrigam a uma inovação constante na procura de soluções de baixo consumo energético e de impacto ambiental baixo, nomeadamente no que diz respeito aos sistemas de climatização e refrigeração. Têm vindo a ser criadas medidas, tanto a nível internacional como nacional, no sentido de reduzir as emissões nocivas para a atmosfera, consequência do excessivo consumo de combustíveis fósseis, e do aumento da rentabilidade da energia e maior utilização de energias renováveis. O presente estudo de dimensionamento de um sistema de absorção, a brometo de lítio/água, com coletores solares, tem por base o sistema de compressão existente num edifício de serviços no centro de Lisboa. Foi efetuada uma analise simplificada dos seus dados de consumo energético, de maneira a verificar a viabilidade económica da substituição do equipamento existente e instalação de um sistema de coletores solares. Concluiu-se que a substituição do equipamento e a instalação de coletores solar, não é atrativa do ponto de vista económico, nesta solução em particular. Contudo, verifica-se uma considerável redução do impacto ambiental do consumo energético do edifício.