Aplicação da água residuária das salinas no tratamento de efluente têxtil

The treatment of colored and alkaline effluent has been a challenge to the textile industry. An alternative to remove the colors of those effluents is applying magnesium chloride as a coagulant agent. The magnesium ion, in high pH, hydrolyzes itself, forming the magnesium hydroxide which has a large adsorptive area and positive electrostatic charges able to act as an efficient coagulant. The bittern wastewater from the salt industries has been studied as a potential font of this magnesium ion. Nowadays, this bittern wastewater is evicted into the sea, without any treatment or other use. This thesis has evaluated the potential of applying the wastewater from the salt industries in the treatment of dyeing effluent containing indigo dye and alkaline pH. All the experiments were made in jar tests simulating the chemical coagulation, flocculation and decantation steps ranging the pH and the concentration of magnesium ion. Were obtained removals between 96% and 76% for turbidity, apparent color, and true color, respectively, using 200mg/L Mg2+. The reduction of costs with acid, when were used the salt industries wastewater, comparing with Al2(SO4)3, was 62%. For the degradation of organic matter remaining in the clarified, around 900 mg/L, was applyed the advanced process of oxidation: photo-Fenton. The preliminary results showed 57% reduction in DOC. According to the results obtained, the salt industries wastewater can be applied, as coagulant, in the physical-chemical treatment of the denim dyeing wastewater, so it is not necessary a previous adjust of pH, efficiently and economically

Micro-Raman spectroscopy and SEM/EDX applied to improve the zircon fission track method used for dating geological formations

The zircon mineral is widely studied in geochronology. In the case of the fission track method (FTM), the age is determined by the density of fission tracks at the zircon surface, which can be observed with an optical microscope after an appropriate chemical treatment (etching). The etching must be isotropic at the zircon grain surface to be used in the FTM, which leads those zircon grains whose etching is anisotropic to be discarded. The only reason for this discarding is the nonuniform morphology of the surface grain seen by optical microscopy, that is, no further physicochemical analysis is performed. In this work, combining micro-Raman and scanning electron microscopy (SEM) to study the etching anisotropy, it was shown that zircon grains that present at least one area at the surface where the density of fission track is uniform can be used in the FTM. The micro-Raman showed characteristic spectra of the standard zircon sample either from the areas where there are tracks or from where there are not. The only difference found was in the Raman bandwidths, which were broader for the areas with higher density of fission tracks. This suggests simply a decrease in the relative percentage of the crystalline/amorphous phases at these areas. The SEM/energy dispersive spectrometry (EDX) showed that there were no significant differences in the principal chemical composition at the areas with and without fission tracks. Copyright (c) 2008 John Wiley & Sons, Ltd.

Surface characterization of Ti-7.5Mo alloy modified by biomimetic method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Encapsulation of titanium (IV) silsesquioxane into the NH4USY zeolite: Preparation, characterization and application

This work describes the encapsulation of titanium (IV) silsesquioxane into the supercavities of NH4USY ultra stabilized zeolite, after chemical treatment. The modified zeolite was characterized by Fourier transform infrared spectra, Nuclear magnetic resonance, scanning electronic microscopy, X-ray diffraction and thermogravity. This encapsulated titanium (IV) silsesquioxane can adsorb Azure A chloride after treatment with H3PO4, without modifier leaching problems. In an electrochemical study, the cyclic voltammograms of the graphite paste modified electrode, shows two redox couples with formal potential (E-0) -0. 1 V and 0.21 V to I and II redox couples respectively (v = 700 mV s(-1); Britton Robinson buffer (B-R) solution, pH 3) versus SCE ascribed to a monomer and dimmer of azure. This paper shows the use of ultra stabilized zeolite in the electrochemical field as host for molecules with nanometric dimensions. (c) 2006 Elsevier Ltd. All rights reserved.

Uso da palha de carnaúba em revestimento de dutos

In this work, the plant species Copernicia prunifera (Miller) H. E. Moore (carnauba), naturally occurring which prevails in the northeast region of Brazil was the subject of studies aiming its use as external coating of pipelines used in petroleum industry. The part of the plant worked were the leaves, also called straw, which were coated with resinous material. For this purpose, it was necessary to evaluate the effectiveness of the use of acrylic resins in the straw carnauba coating. The properties of the untreated carnauba straw and chemically treated with sodium hydroxide, hexane and carbon tetrachloride were investigated by ATRFTIR, SEM and thermal analysis. The first two techniques showed that treatment with solvents has caused major changes in the straw surface, while the thermal analysis indicated that the sodium hydroxide caused variations in thermal stability of straw constituents. Water absorption measurements showed that treatments have accelerated the absorption process and the reduction of contact angle values for treated samples with solvents indicated higher hidrophilicity of straw. The tensile tests showed lower values of elastic modulus and tensile strength for treated samples. Furthermore, coatings using pure commercial resins A and B as well as the formulations with clay were applied in straw and they were examined once again through thermal analysis, water absorption measurements, contact angle and mechanical tests. To analyze the effect of heat ageing, samples were subjected to tensile tests again in order to assess its resistance. The results showed that the resins/clay formulations increased thermal stability of straw, they promoted a good impermeabilization and caused significant decrease in the values of elastic modulus and tensile strength. Evaluating the ageing effect on the mechanical properties, it has been showed good recovery to the coated straw with the formulations A 60 and A 80% in modulus and tensile strength values and elongation at break values have remained very close. It is thus concluded that the carnauba straw can be used as a coating of pipelines with significant cost savings, since there is no need for pretreatment for its use and shows itself as a viable biotechnology alternative, contributing to the quality of coatings material and environment preservation.

Uso do pó da palha de carnaúba em compósitos de quitosana

In this work a biodegradable composite using the carnauba straw s powder as reinforcement on chitosan matrix polymeric were manufactured. Firstly, were carried out the chemistry characterization of the carnauba straw s powder before and after treatments with NaOH and hexane. Goering and Van Soest method (1970), flotation test, moisture absorption, FTIR, TG/DTG, DSC and SEM have also being carried out. Composites were developed with variations in granulometry and in powder concentrations. They were characterized by TG/DTG, SEM and mechanicals properties. The results of chemical composition showed that the carnauba straw s powder is composed of 41% of cellulose; 28,9% of hemicellulose and 14% of lignin.The flotation test have indicated that the chemical treatment with NaOH decreased the powder s hidrophilicity.The thermal analysis showed increased of thermal stability of material after treatments. The results of FTIR and SEM revealed the removal of soluble materials from the powder (hemicelluloses and lignin), the material became rougher and clean. The composites obtained showed that the mechanicals properties of the composites were decreased in respect at chitosan films, and the composites with the powder at 150 Mesh showed less variation in the modulus values. The speed test of 10 mm/min showed the better reproducibility of the results and is in agreement to the standard ASTM D638. The SEM analysis of fracture showed the low adhesion between the fiber/matrix. The increase of volume of powder in the composite caused a decrease in values of stress and strain for the samples with untreated powder and treated with hexane. The composite with 50% of the powder s treated in NaOH didn t have significant variation in the values of stress and strain as compared with the composites with 10% of the powder, showing that the increase in the volume of fiber didn t affect the stress and strain of the composite. Thereby, it is concluded that the manufacture of polymeric composites of chitosan using carnauba straw s powder can be done, without need for pre-treatment of reinforcement, become the couple of carnauba straw s powder-chitosan a good alternative for biodegradable composites

Valor nutritivo do feno de braquiária amonizado com uréia ou inoculado com Pleurotus ostreatus

Verificou-se, mediante análises de composição química e ensaio de digestibilidade com ovinos, o efeito dos tratamentos químico (amonização com uréia) e biológico (inoculação com o fungo Pleurotus ostreatus) sobre o valor nutritivo do feno de Brachiaria decumbens. Ambos os tratamentos duraram 42 dias; após esse período, o feno foi seco e moído para fornecimento aos animais. As dietas experimentais foram: feno não tratado (FNT); feno não tratado + uréia (FNT + U); feno inoculado com fungo + uréia (FTB + U); e feno amonizado + feno não tratado (FTQ + FNT). As dietas FNT + U, FTB + U e FTQ + FNT foram isonitrogenadas. Tanto o tratamento químico como o biológico causaram mudanças na composição química do feno. A amonização elevou os teores de proteína bruta (PB) e fibra em detergente ácido (FDA) e reduziu os teores de hemicelulose (HEM) e a proporção de hemicelulose na parede celular (HEM-FDN). Já o tratamento biológico tendeu a aumentar o teor de PB; elevou os teores de FDA, lignina (LIG), a proporção de celulose na parede celular (CEL-FDN) e a proporção de lignina na parede celular (LIG-FDN); e reduziu os teores de fibra em detergente neutro (FDN), HEM e HEM-FDN. Entretanto, diminuiu a digestibilidade da matéria seca (MS), FDN, celulose (CEL) e FDA, mas aumentou o consumo, provavelmente em decorrência do menor teor de FDN e menor tamanho médio de partículas, o que causou maior velocidade de passagem. Os tratamentos biológico e químico são alternativas importantes no incremento do valor nutritivo de materiais lignocelulósicos, todavia, os resultados obtidos neste ensaio não foram satisfatórios.

Influence of surface treatments on the flexural strength of denture base repair

Objective: The purpose of this study was to evaluate the flexural strength of repairs made with autopolymerising acrylic resin after different treatments of joint surfaces.Material and Methods: Fifty rectangular specimens were made with heat-polymerised acrylic resin and 40 were repaired with autopolymerising acrylic resin following joint surface treatments: group 1 (intact specimens), group 2 (chemical treatment: wetting with methyl-methacrylate for 180 s), group 3 (abraded with silicon carbide paper), group 4 (abraded and wetting with methyl-methacrylate for 180 s) and group 5 (without surface treatment). The flexural strength was measured by a three-point bending test using a universal testing machine with a 100 Kgf load cell in the centre of repair at 5 mm/min cross-head speed. All data were analysed using one-way ANOVA and Tukey HSD test for multiple comparisons (p < 0.05).Results: Among repaired specimens, groups 2 and 4 had 66.53 +/- 3.4 and 69.38 +/- 1.8 MPa mean values and were similar. These groups had superior flexural strength than groups 3 and 5 that were similar and had 54.11 +/- 3.4 and 51.24 +/- 2.8 MPa mean values, respectively. Group 1 had a mean value of 108.30 +/- 2.8 MPa being the highest result.Conclusion: It can be concluded that the treatment of the joint surfaces with methyl-methacrylate increases the flexural strength of denture base repairs, although the strength is still lower than that observed for the intact denture base resin. Abrasion with sandpaper was not able to influence the flexural strength of repaired denture bases.

Evolution of Substrate Preparation Behaviors for Cultivation of Symbiotic Fungus in Attine Ants (Hymenoptera: Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Características físico-químicas e utilização em alimentos de amidos modificados por tratamento oxidativo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hydrochemical evaluation of different spring waters for bottling

This investigation was carried out within the Parana sedimentary basin in São Paulo and Mato Grosso do Sul States, Brazil, and involved the sampling of different spring water samples with the purpose of evaluating their quality for bottling Several methods were utilized for acquiring the hydrochemical data, such as methyl orange end-point titration, potentiometry, ion selective electrodes, spectrophotometry, atomic absorption spectrophotometry and inductively coupled plasma spectrometry The results obtained for the analyzed samples were compared with the guideline values established by the São Paulo State and Brazilian Health Ministry legislations for defining the potable water standards The Brazilian Code for Mineral Waters that was established by Register 7841 published on 8 August 1945 was also taken into account for verifying if the spring waters are mineralized The hydrochemical data allowed the identification of anthropogenic and geogenic inputs of some constituents in most of the samples, which affected the water quality and did not allow them to be utilized for commercial purposes (bottling) The waters of these springs can only become appropriate for human consumption after previous chemical treatment

Seasonal variation of Alphitobius diaperinus population in broiler facilities in the center-north region of the state of São Paulo

The seasonality of Alphitobius diaperinus population was studied during different seasons during one year, in broiler facilities located in the center-north region of the State of São Paulo. Parasite counting was weekly carried out by the use of traps adapted from the modified model of Arends. During the experimental period, facilities were not submitted to chemical treatment, and the litter was changed between flocks. A lower number of adults and larvae was observed during autumn, with the peak registered in the summer. There was no significant difference between spring and winter averages (adults and larvae), and between spring and summer averages (adults). Average temperatures in the facilities varied from 23.4ºC (winter) to 27.1ºC (spring). The environmentally controlled systems used by the broiler industry provide an adequate habitat for A. diaperinus development. The continuous monitoring of the population of this parasite is essential for designing control strategies, and this can be accomplished by utilizing the traps used in the present experiment.

Qualidade fisiológica de sementes de soja tratadas com fungicidas durante e após o armazenamento

O presente trabalho teve o objetivo de avaliar o efeito do tratamento fungicida durante e após a armazenagem, na qualidade fisiológica de sementes de soja. Utilizaram-se sementes da cultivar BR-16, produzidas na safra de 1999/2000 e armazenadas em Marechal Cândido Rondon - PR. Para o tratamento utilizou-se a mistura de carbendazin + thiram, na dosage de 30 e 70g de i.a./100kg de semente, respectivamente. Realizou-se o tratamento de amostras mensalmente, de maio a dezembro de 2000, sendo as sementes analisadas imediatamente após o procedimento. Sementes sem tratamento representaram a testemunha. As amostras tratadas e armazenadas foram analisadas e comparadas com as tratadas e analisadas imediatamente antes da semeadura (dezembro de 2000). A qualidade das sementes foi avaliada através dos testes de germinação, de tetrazólio para vigor e viabilidade e emergência em campo. O delineamento experimental foi inteiramente casualizado, com quatro repetições por tratamento para cada teste. Realizou-se a comparação das médias através do teste de Tukey a 5% de probabilidade. O teste de germinação e o de tetrazólio não evidenciaram efeito negativo do tratamento fungicida anterior ao período de armazenagem sobre a qualidade das sementes. As sementes tratadas e não apresentaram decréscimo de viabilidade e de vigor, atingindo valores de germinação inferiores a 75%, em dezembro de 2000. Na emergência em campo, constatou-se que as sementes mantidas tratadas por mais de quatro meses apresentaram desempenho inferior comparativamente às tratadas nas demais épocas.

TRATAMENTO DE SEMENTES DE ARROZ, TRIGO, FEIJÃO E SOJA COM UM PRODUTO FORMULADO À BASE DE CÉLULAS E DE METABÓLITOS DE Bacillus subtilis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de fontes de amônia para o tratamento de fenos de gramíneas tropicais. 1. Constituintes da parede celular, poder tampão e atividade ureática

Avaliaram-se as alterações da fração fibrosa e as características químicas dos fenos de braquiária decumbens (Brachiaria decumbnes Stapf) e jaraguá (Hyparrhenia rufa Ness Stapf) não-tratados, tratados com uréia (U-5,4% da MS), uréia (UL-5,4% da MS) mais labe-labe (Lablab purpureus L. Sweet, cv. Highworth-3,0% da MS) ou amônia anidra (NH3 -3,0% da MS). O tratamento químico com uréia ou NH3 aumentou o pH e a digestibilidade in vitro verdadeira dos fenos. A amonização não alterou os teores de fibra em detergente ácido e celulose, mas diminuiu os de fibra em detergente neutro, hemicelulose e lignina. O uso do labe-labe como fonte adicional de urease não aumentou a eficiência da uréia no tratamento dos volumosos. As avaliações do conteúdo de umidade, do poder tampão e da atividade ureática são técnicas que podem auxiliar na previsão das respostas dos volumosos à amonização com o uso de uréia.