Novos sistemas de liberação de fármacos à base de xilana

The aim of this work was to perform the extraction and characterization of xylan from corn cobs and prepare xylan-based microcapsules. For that purpose, an alkaline extraction of xylan was carried out followed by the polymer characterization regarding its technological properties, such as angle of repose, Hausner factor, density, compressibility and compactability. Also, a low-cost and rapid analytical procedure to identify xylan by means of infrared spectroscopy was studied. Xylan was characterized as a yellowish fine powder with low density and poor flow properties. After the extraction and characterization of the polymer, xylan-based microcapsules were prepared by means of interfacial crosslinking polymerization and their characterization was performed in order to obtain gastroresistant multiparticulate systems. This work involved the most suitable parameters of the preparation of microcapsules as well as the study of the process, scale-up methodology and biological analysis. Magnetic nanoparticles were used as a model system to be encapsulated by the xylan microcapsules. According to the results, xylan-based microcapsules were shown to be resistant to several conditions found along the gastrointestinal tract and they were able to avoid the early degradation of the magnetic nanoparticles

Micropartículas poliméricas à base de xilana e Eudragit® S-100 contendo mesalazina visando à liberação cólon-específica

Colon-specific drug delivery systems have attracted increasing attention from the pharmaceutical industry due to their ability of treating intestinal bowel diseases (IBD), which represent a public health problem in several countries. In spite of being considered a quite effective molecule for the treatment of IBD, mesalazine (5-ASA) is rapidly absorbed in the upper gastrointestinal tract and its systemic absorption leads to risks of adverse effects. The aim of this work was to develop a microparticulate system based on xylan and Eudragit® S- 100 (ES100) for colon-specific delivery of 5-ASA and evaluate the interaction between the polymers present in the systems. Additionaly, the physicochemical and rheological properties of xylan were also evaluated. Initially, xylan was extracted from corn cobs and characterized regarding the yield and rheological properties. Afterwards, 10 formulations were prepared in different xylan and ES100 weight ratios by spray-drying the polymer solutions in 0.6N NaOH and phosphate buffer pH 7.4. In addition, 3 formulations consisting of xylan microcapsules were produced by interfacial cross-linking polymerization and coated by ES100 by means of spray-drying in different polymer weight ratios of xylan and ES100. The microparticles were characterized regarding yield, morphology, homogeneity, visual aspect, crystallinity and thermal behavior. The polymer interaction was investigated by infrared spectroscopy. The extracted xylan was presented as a very fine and yellowish powder, with mean particle size smaller than 40μm. Regarding the rheological properties of xylan, they demonstrated that this polymer has a poor flow, low density and high cohesiveness. The microparticles obtained were shown to be spherical and aggregates could not be observed. They were found to present amorphous structure and have a very high thermal stability. The yield varied according to the polymer ratios. Moreover, it was confirmed that the interaction between xylan and ES100 occurs only by means of physical aggregation

Consequências da deriva de clomazone e sulfentrazone em clones de E. grandis x E. urophylla

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização citogenética em Schlumbergera truncata (Haworth) Moran e Schlumbergera × buckleyi (T. Moore) Tjaden (Cactaceae)

O número cromossômico diplóide de Schlumbergera truncata e Schlumbergera x buckleyi, de indivíduos com diferentes tipos de coloração de pétalas, foi determinado usando-se pontas de raízes. A utilização de 8-hidroxiquinoleína 0,003 M à 36 °C por 3 horas possibilitou melhor separação cromossômica. Técnica de bandeamento C e de coloração Giemsa permitiram o estudo cariológico dessas espécies. O híbrido Schlumbergera × buckleyi (rósea) apresenta 2n = 22 cromossomos com fórmula cariotípica 16 M + 6 SM. Schlumbergera truncata, apresentando pétalas nas cores vermelha, branca e pink, possui 2n = 22 cromossomos, formulação cariotípica idêntica à de Schlumbergera × buckleyi, enquanto a planta com flores de coloração amarelada mostrou 2n = 34 cromossomos. A classificação cromossômica foi baseada no índice centromérico. Nas plantas que apresentam coloração vermelha, branca, pink e rósea nas pétalas, o melhor período de obtenção de metáfases corresponde ao período de florescimento. Schlumbergera truncata com flores amareladas apresenta dois picos anuais de divisão mitótica. Esses resultados dão suporte à um melhor entendimento da biologia no gênero Schlumbergera e auxiliam na classificação taxonômica nos casos onde apenas as características fenotípicas não são suficientemente confiáveis para a classificação das plantas no mesmo táxon.

Morfologia e morfometria do oviduto de codornas Nothura maculosa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Early development of Astronotus ocellatus under stereomicroscopy and scanning electron microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação entre cultivares de carambola para produção de produtos minimamente processados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de diferentes tipos de atmosferas modificadas na vida útil de carambolas minimamente processadas

Este trabalho teve por objetivo a avaliação da vida útil potencial de carambolas cv. Golden Star, minimamente processadas, armazenadas em diferentes tipos de embalagens plásticas, para a concepção da atmosfera modificada. Os frutos colhidos fisiologicamente maturos apresentaram coloração verde-amarelada, sólidos solúveis (SS) médios de 6,8 ºBrix e massa média de 185 g. Antes da aplicação dos tratamentos, os frutos foram selecionados, higienizados em solução de hipoclorito de sódio (NaOCl) a 100 mg. L-1, resfriados por 12 horas a 15 ± 0,5 °C, seccionados transversalmente, sendo então novamente higienizados em solução de NaOCl a 10 mg.L-1, por 3 minutos. em seguida, os pedaços em forma de estrelas foram acondicionados em bandejas rígidas de poliestireno, com capacidade para 250 g, e revestidas com os seguintes materiais: T1: filme plástico perfurado de polietileno de baixa densidade (PEBD), de 0,006 mm; T2: filme plástico poliolefínico com antiembassamento da Dupont® (AGF), de 0,015 mm; T3: filme plástico poliolefínico da Dupont® (HF), de 0,015 mm; T4: filme plástico de PEBD, de 60 µm; T5: filme plástico de PEBD, de 80 µm; T6: filme plástico de polipropileno (PP), de 22 µm, e T7: bandeja rígida de polietileno tereftalato (PET), com capacidade para 500 mL, com tampa do mesmo material. As embalagens foram então armazenadas em câmara frigorífica a 12 ± 0,5 °C e 90 ± 3% de U.R, por 18 dias. Observou-se que não houve diferença significativa quanto aos sólidos solúveis (SS) e acidez titulável (AT). O maior número de microrganismos e valor de pH foram observados nos frutos embalados nos filmes plásticos de PEBD de 0,006 mm, AGF e HF de 0,015 mm da Dupont®. Entretanto, os frutos acondicionados nas embalagens PET apresentaram o maior teor de ácido ascórbico. da mesma forma, somente nas embalagens PET é que se conseguiu modificação atmosférica eficiente do ponto de vista da manutenção dos atributos de qualidade durante o AR. Assim, esse tratamento proporcionou adequado controle microbiológico e manutenção das características de qualidade por 18 dias para as carambolas minimamente processadas.

Sintomas de deficiência tardia de fósforo em soja

Foi notado, em área de cultivo experimental em Botucatu (SP), que a soja, na época de enchimento das vagens, apresentava folhas com cor amarelada, que evoluía para palha, com tons arroxeados no limbo foliar e nos pecíolos. Esses sintomas eram compatíveis com as descrições mais genéricas de deficiência de P para outras espécies, apesar de não estarem descritos para soja. Foi conduzido um experimento em vasos com areia lavada e solução nutritiva, com o objetivo de reproduzir os sintomas observados em condição de campo. Foram cultivadas três plantas de soja por vaso, em ambiente aberto. Os sintomas de deficiência de P apareceram inicialmente nas folhas mais velhas, que ficaram amareladas, conservando algumas nervuras verdes. O tom amarelado foi-se intensificando, adquirindo tons avermelhados e, posteriormente, arroxeados. Notou-se ainda colapso do pecíolo das folhas com sintomas de deficiência. A fase de pegamento de vagens de soja mostrou-se mais sensível à deficiência de P do que a fase de enchimento de grãos podendo ocorrer recuperação de parte da produtividade pela produção de menor número de grãos e vagens chochas e aumento no tamanho de grão, se a deficiência ocorrer tardiamente e não for muito severa.

Compósito reforçado com sisal para aplicação na moda

The objective of this research is the fabrication of a composite reinforced with dyed sisal fiber and polyester matrix for application in the fields such as, fashion, clothing, interior textiles; fashion accessories are some of the examples. For the fabrication of the composite, the sisal fibers were subjected to processes such as: chemical treatment with sodium hydroxide (NaOH) in the removal of impurities; bleaching for removing the yellowish color of the natural fiber and dyeing with direct dyes to confer the colors blue, green and orange. The search for new technologies ecologically correct has become a major concern in recent decades. Studies show that composite polymer reinforced by natural fibers is suitable for a large number of applications, and its use is advantageous in terms of economic and ecological. The dyed fibers were cut to a length of 30 mm, is used in the confection of webs. For this purpose, a web preparer by immersion, developed in the Laboratory of Chemical Textile of UFRN. The composite sheets measuring 300 x 300 x3 mm were molded by compression, with unsaturated orthophthalic polyester as matrix, and the samples in sizes 150 x 25 x 3 mm were cut with the aid of a laser machine, to be subjected to traction and flexion. The mechanical properties of traction and flexion in three points were performed in the Laboratory of metal and mechanical tests of Materials Engineering of UFRN. The resulting samples from the tests were evaluated in scanning electron microscope (SEM) at CTGas RN. On the basis of the analysis of the results from the mechanical tests, it was observed that the composite had good mechanical behavior, both in traction as in flexion. Furthermore, it was observed that in the water absorption test, the samples had a different percentage among themselves, this occurred due to the variation of density found in the fibre webs. The images of the SEM showed the failures from the manufacturing process and the adhesion of fibre/matrix. When the samples were prepared with the dyed fibers to be applied in fashion, the results were positive, and it can be concluded that the main objective of this work was achieved

Histoarchitectural Features of the Hepatopancreas of the Amazon River Prawn Macrobrachium amazonicum

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural analysis of the Pimelodus maculatus (Lacépède, 1803) embryogenesis (Siluriformes: Pimelodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Xantogranuloma órbito-palpebral: relato de caso

Xantogranuloma é doença histiocítica, caracterizada por lesões amareladas na pele ou na derme, acompanhadas ou não de alterações hematológicas ou neoplasias. O objetivo deste é relatar o caso de uma mulher de 39 anos, com queixa de inchaço progressivo nas pálpebras superiores, há 6 anos, indolor, sem alterações sistêmicas. O exame histológico mostrou infiltração maciça da pele, tecido muscular e gordura orbitária por histiócitos xantomatosos e abundantes células gigantes do tipo Touton. O diagnóstico foi de xantogranuloma do adulto. Os autores comentam os diagnósticos diferenciais, assim como a necessidade de exames periódicos, devido ao risco de associação com doenças sistêmicas malignas.

Enamel microabrasion followed by dental bleaching for patients after orthodontic treatment - Case reports

This article reports clinical procedures used to remove residual bonded resin and enamel stains following bracket debonding at the conclusion of orthodontic treatment. A water-cooled fine-tapered diamond bur was used for resin removal, followed by enamel surface finishing using a commercially available microabrasion paste. It was noted that residual tooth coloration remained yellowish because of enamel translucency; the yellow dentin shade showed through. Additional tooth shade lightening was achieved using carbamide peroxide dental bleaching solution in custom-formed trays. This report describes a safe and effective technique that optimizes tooth appearance at the conclusion of orthodontic therapy. Mechanical resin removal, enamel microabrasion, and tooth bleaching are employed.

Morphological and biochemical analysis of the stored and larval food of an obligate necrophagous bee, Trigona hypogea

Trigona hypogea, T. crassipes, and T. necrophaga are obligate necrophagous bees that differ from the majority of bees by using animal material instead of pollen as a protein resource. Since T. hypogea does not store protein in cerumen pots, it was thought that glandular secretions were its only larval protein source. This is in contrast to T. necrophaga which stores a yellowish proteinaceous jelly in the pots. Our results show that the larval food of T. hypogea has a higher protein content than the food stored in the pots and that it presents an electrophoretical protein pattern similar to that of the hypopharyngeal gland, indicating that workers add glandular secretions to the larval food while provisioning the brood cells. Thus, it can be suggested that T. hypogea has a provisioning behavior similar to other Meliponinae. The presence of several bands of proteins in the food stored in the pots shows that this species stores carrion mixed with honey in storage pots. Morphological data suggest that both larvae and adults make use of the same foodstuffs. These results also suggest that T. hypogea is more similar to other necrophagous species than it is to T. necrophaga (a more specialized bee).