Human Exposure to Endocrine-Disrupting Chemicals and Prenatal Risk Factors for Cryptorchidism and Hypospadias: A Nested Case-Control Study

BACKGROUND. Exposure to xenoestrogens during pregnancy may disturb the development and function of male sexual organs. OBJECTIVE. In this study we aimed to determine whether the combined effect of environmental estrogens measured as total effective xenoestrogen burden (TEXB) is a risk factor for male urogenital malformations. METHODS. In a case-control study, nested in a mother-child cohort (n = 702) established at Granada University Hospital, we compared 50 newborns with diagnosis of cryptorchidism and/or hypospadias with 114 boys without malformations matched by gestational age, date of birth, and parity. Controls did not differ from the total cohort in confounding variables. TEXB and levels of 16 organochlorine pesticides were measured in placenta tissues. Characteristics of parents, pregnancy, and birth were gathered by questionnaire. We used conditional and unconditional regression models to estimate odds ratios (ORs) and 95% confidence intervals (CIs). RESULTS. TEXB from organohalogenated compounds was detectable in 72% and 54% of case and control placentas, respectively. Compared with controls, cases had an OR for detectable versus non-detectable TEXB of 2.82 (95% CI, 1.10-7.24). More pesticides were detected in cases than in controls (9.34 +/- 3.19 vs. 6.97 +/- 3.93). ORs for cases with detectable levels of pesticides, after adjusting for potential confounders in the conditional regression analysis, were o,p'-DDT (OR = 2.25; 95% CI, 1.03-4.89), p,p'-DDT (OR = 2.63; 95% CI, 1.21-5.72), lindane (OR = 3.38; 95% CI, 1.36-8.38), mirex (OR = 2.85; 95% CI, 1.22-6.66), and endosulfan alpha (OR = 2.19; 95% CI, 0.99-4.82). Engagement of mothers in agriculture (OR = 3.47; 95% CI, 1.33-9.03), fathers' occupational exposure to xenoestrogens (OR = 2.98; 95% CI, 1.11-8.01), and history of previous stillbirths (OR = 4.20; 95% CI, 1.11-16.66) were also associated with risk of malformations. CONCLUSIONS We found an increased risk for male urogenital malformations related to the combined effect of environmental estrogens in placenta.

Host factors in occupational diisocyanate asthma: a Swiss longitudinal study

Objective: To investigate the usefulness of surrogates for individual susceptibility to organic diisocyanates in occupational asthma. Subjects: All new cases declared to the Swiss National Accident Insurance Company (SUVA) for establishment of a case for compensable occupational disease during 1993. Sixty-nine persons, of whom three were women, were suspected of having occupational asthma due to isocyanates. Of these, 47 subjects fulfilled the criteria to be accepted as an occupational disease case. Methods: All subjects were studied clinically and gave a blood sample for the phenotyping of their alpha-antitrypsin status and for immunological studies. The subjects were also given a peroral dose of caffeine for the determination of their N-acetylation capacity. Finally, those with an occupational disease were subjected to the methacholine provocation test. Results: Forty-four persons with occupational disease, out of 47, were heterozygous antitrypsin carriers and/or slow acetylators of primary amines. In the bronchial provocation with methacholine, 12 of these subjects had an unaltered response and seven had a mild reaction, 13 a moderate one and 15 a severe reaction. Interpretation: The study confirms the finding that slow N-acetylators are susceptible to asthma from exposure to common diisocyanate monomers at work. The same applies to heterozygous antitrypsin-phenotype carriers. Thus, the use of these markers may reinforce the diagnostic procedure, but they cannot completely replace the immunological tests. [Authors]

Estrogenic activity assessment of environmental chemicals using in vitro assays: identification of two new estrogenic compounds.

Environmental chemicals with estrogenic activities have been suggested to be associated with deleterious effects in animals and humans. To characterize estrogenic chemicals and their mechanisms of action, we established in vitro and cell culture assays that detect human estrogen receptor [alpha] (hER[alpha])-mediated estrogenicity. First, we assayed chemicals to determine their ability to modulate direct interaction between the hER[alpha] and the steroid receptor coactivator-1 (SRC-1) and in a competition binding assay to displace 17ss-estradiol (E(2)). Second, we tested the chemicals for estrogen-associated transcriptional activity in the yeast estrogen screen and in the estrogen-responsive MCF-7 human breast cancer cell line. The chemicals investigated in this study were o,p'-DDT (racemic mixture and enantiomers), nonylphenol mixture (NPm), and two poorly analyzed compounds in the environment, namely, tris-4-(chlorophenyl)methane (Tris-H) and tris-4-(chlorophenyl)methanol (Tris-OH). In both yeast and MCF-7 cells, we determined estrogenic activity via the estrogen receptor (ER) for o,p'-DDT, NPm, and for the very first time, Tris-H and Tris-OH. However, unlike estrogens, none of these xenobiotics seemed to be able to induce ER/SRC-1 interactions, most likely because the conformation of the activated receptor would not allow direct contacts with this coactivator. However, these compounds were able to inhibit [(3)H]-E(2) binding to hER, which reveals a direct interaction with the receptor. In conclusion, the test compounds are estrogen mimics, but their molecular mechanism of action appears to be different from that of the natural hormone as revealed by the receptor/coactivator interaction analysis.

Social and medical vulnerability factors of emergency department frequent users in a universal health insurance system.

OBJECTIVES: The objectives were to identify the social and medical factors associated with emergency department (ED) frequent use and to determine if frequent users were more likely to have a combination of these factors in a universal health insurance system. METHODS: This was a retrospective chart review case-control study comparing randomized samples of frequent users and nonfrequent users at the Lausanne University Hospital, Switzerland. The authors defined frequent users as patients with four or more ED visits within the previous 12 months. Adult patients who visited the ED between April 2008 and March 2009 (study period) were included, and patients leaving the ED without medical discharge were excluded. For each patient, the first ED electronic record within the study period was considered for data extraction. Along with basic demographics, variables of interest included social (employment or housing status) and medical (ED primary diagnosis) characteristics. Significant social and medical factors were used to construct a logistic regression model, to determine factors associated with frequent ED use. In addition, comparison of the combination of social and medical factors was examined. RESULTS: A total of 359 of 1,591 frequent and 360 of 34,263 nonfrequent users were selected. Frequent users accounted for less than a 20th of all ED patients (4.4%), but for 12.1% of all visits (5,813 of 48,117), with a maximum of 73 ED visits. No difference in terms of age or sex occurred, but more frequent users had a nationality other than Swiss or European (n = 117 [32.6%] vs. n = 83 [23.1%], p = 0.003). Adjusted multivariate analysis showed that social and specific medical vulnerability factors most increased the risk of frequent ED use: being under guardianship (adjusted odds ratio [OR] = 15.8; 95% confidence interval [CI] = 1.7 to 147.3), living closer to the ED (adjusted OR = 4.6; 95% CI = 2.8 to 7.6), being uninsured (adjusted OR = 2.5; 95% CI = 1.1 to 5.8), being unemployed or dependent on government welfare (adjusted OR = 2.1; 95% CI = 1.3 to 3.4), the number of psychiatric hospitalizations (adjusted OR = 4.6; 95% CI = 1.5 to 14.1), and the use of five or more clinical departments over 12 months (adjusted OR = 4.5; 95% CI = 2.5 to 8.1). Having two of four social factors increased the odds of frequent ED use (adjusted = OR 5.4; 95% CI = 2.9 to 9.9), and similar results were found for medical factors (adjusted OR = 7.9; 95% CI = 4.6 to 13.4). A combination of social and medical factors was markedly associated with ED frequent use, as frequent users were 10 times more likely to have three of them (on a total of eight factors; 95% CI = 5.1 to 19.6). CONCLUSIONS: Frequent users accounted for a moderate proportion of visits at the Lausanne ED. Social and medical vulnerability factors were associated with frequent ED use. In addition, frequent users were more likely to have both social and medical vulnerabilities than were other patients. Case management strategies might address the vulnerability factors of frequent users to prevent inequities in health care and related costs.

The effect of non-medical factors on variations in the performance of colonoscopy among different health care settings

BACKGROUND: Previous published studies have shown significant variations in colonoscopy performance, even when medical factors are taken into account. This study aimed to examine the role of nonmedical factors (ie, embodied in health care system design) as possible contributors to variations in colonoscopy performance. METHODS: Patient data from a multicenter observational study conducted between 2000 and 2002 in 21 centers in 11 western countries were used. Variability was captured through 2 performance outcomes (diagnostic yield and colonoscopy withdrawal time), jointly studied as dependent variables, using a multilevel 2-equation system. RESULTS: Results showed that open-access systems and high-volume colonoscopy centers were independently associated with a higher likelihood of detecting significant lesions and longer withdrawal durations. Fee for service (FFS) payment was associated with shorter withdrawal durations, and so had an indirect negative impact on the diagnostic yield. Teaching centers exhibited lower detection rates and longer withdrawal times. CONCLUSIONS: Our results suggest that gatekeeping colonoscopy is likely to miss patients with significant lesions and that developing specialized colonoscopy units is important to improve performance. Results also suggest that FFS may result in a lower quality of care in colonoscopy practice and highlight the fact that longer withdrawal times do not necessarily indicate higher quality in teaching centers.

Distribution of metals exposure and associations with cardiometabolic risk factors in the "Modeling the Epidemiologic Transition Study".

BACKGROUND: Metals are known endocrine disruptors and have been linked to cardiometabolic diseases via multiple potential mechanisms, yet few human studies have both the exposure variability and biologically-relevant phenotype data available. We sought to examine the distribution of metals exposure and potential associations with cardiometabolic risk factors in the "Modeling the Epidemiologic Transition Study" (METS), a prospective cohort study designed to assess energy balance and change in body weight, diabetes and cardiovascular disease risk in five countries at different stages of social and economic development. METHODS: Young adults (25-45 years) of African descent were enrolled (N = 500 from each site) in: Ghana, South Africa, Seychelles, Jamaica and the U.S.A. We randomly selected 150 blood samples (N = 30 from each site) to determine concentrations of selected metals (arsenic, cadmium, lead, mercury) in a subset of participants at baseline and to examine associations with cardiometabolic risk factors. RESULTS: Median (interquartile range) metal concentrations (μg/L) were: arsenic 8.5 (7.7); cadmium 0.01 (0.8); lead 16.6 (16.1); and mercury 1.5 (5.0). There were significant differences in metals concentrations by: site location, paid employment status, education, marital status, smoking, alcohol use, and fish intake. After adjusting for these covariates plus age and sex, arsenic (OR 4.1, 95% C.I. 1.2, 14.6) and lead (OR 4.0, 95% C.I. 1.6, 9.6) above the median values were significantly associated with elevated fasting glucose. These associations increased when models were further adjusted for percent body fat: arsenic (OR 5.6, 95% C.I. 1.5, 21.2) and lead (OR 5.0, 95% C.I. 2.0, 12.7). Cadmium and mercury were also related with increased odds of elevated fasting glucose, but the associations were not statistically significant. Arsenic was significantly associated with increased odds of low HDL cholesterol both with (OR 8.0, 95% C.I. 1.8, 35.0) and without (OR 5.9, 95% C.I. 1.5, 23.1) adjustment for percent body fat. CONCLUSIONS: While not consistent for all cardiometabolic disease markers, these results are suggestive of potentially important associations between metals exposure and cardiometabolic risk. Future studies will examine these associations in the larger cohort over time.

Fluoriditasetarkastelu ja päästöjen hallinta ferrokromi- ja terästeollisuudessa

Työn alkuosassa kartoitettiin AvestaPolarit –yhtiöiden Tornion tehtaiden keskeiset fluoridilähteet kuten fluspaatti, valukuonat, valupulverit ja fluorivetyhappo. Valupulverien ja kuonien haihtumis- ja liukoisuuskäyttäytymistä valaistiin kotimaisten ja kansainvälisten tutkimusten avulla. Tutkimustuloksia sovellettiin pääpiirteittäin Tornion tehtaiden tilanteeseen ottamalla huomioon tekijät, jotka saattoivat lieventää tai vahvistaa fluoridien vaikutusta ympäristöön. Yleisesti fluoridien ympäristö- ja terveysvaikutukset arvioitiin vähäisiksi. Työn kokeellisessa osassa määritettiin Tornion tehtaiden ferrokromitehtaan, terässulaton, kuumavalssaamon ja kylmävalssaamon fluoriditaseet. Jokaisen osastojen syötteiden fluoridipitoisuudet selvitettiin tuottajien ilmoittamien tuotekoostumuksien, spesifikaatioiden ja fluoridianalyysien perusteella. Fluoridien kokonaismäärät laskettiin jokaiselle syötteelle ja ne suhteutettiin kunkin osaston vuoden 2001 tuotantotasoon. Tasetarkastelussa suurimpina fluoridisyötteinä nousivat odotetusti esiin terässulaton käyttämä kuonanmuodostaja-aine fluspaatti (CaF2) ja kylmävalssaamon peittaushappo, 70 prosenttinen fluorivetyhappo (HF). Lisäksi muita merkittäviä syötteitä olivat kylmävalssaamon käyttämä kalkkipitoinen sekakuona ja ferrokromitehtaan sulatuskoksi. Tuotoksien eli päästöjen fluoridipitoisuudet saatiin selville päästömittauksin. Jätevesistä otettiin pääosin viikoittaisia kokoomanäytteitä, jotka analysoitiin tehtaan laboratoriossa. Kaasumaiset tuotokset oli määritetty kertamittauksien perusteella. Kiinteiden tuotoksien eli sakkojen ja kuonien fluoridimittaukset suoritettiin 3 sulatuksen kuonanäytteistä ja sakan vuosinäytteestä. Tuotoksista suurimmat ominaispäästökertoimet olivat juuri terässulaton AOD-konvertterin ja senkkauunin kuonilla ja kylmävalssaamon neutraloidulla regenerointisakalla ja neutralointisakoilla. Näistä ei aiheutunut varsinaista päästöä lähiympäristöön, koska sakat ja kuonat loppusijoitetaan tehtaan kaatopaikalle tai niitä käytetään liukenemattomassa muodossa. Tornion tehtaiden fluoridisyötteiden ja -tuotoksien mittausepätarkkuudet vaikuttivat fluoriditaseeseen. Ferrokromitehtaan fluoridisyötteet olivat kokonaismäärältään selvästi suurempia kuin tuotokset. Terässulaton fluoriditaseen tuotokset olivat suurempia kuin syötteet ja kylmävalssaamon syötteet sekä tuotokset olivat karkeasti arvioiden samaa suuruusluokkaa. Kuumavalssaamon fluoridisyötteet ja -tuotokset olivat mitättömiä. Fluoriditaseen epävarmuustekijöitä voidaan vähentää suorittamalla esimerkiksi useita fluoridimittauksia kaasumaisista päästöistä.

Modelling nitrogen and phosphorus loads in a Mediterranean river catchment (La Tordera, NE Spain)

Human activities have resulted in increased nutrient levels in many rivers all over Europe. Sustainable management of river basins demands an assessment of the causes and consequences of human alteration of nutrient flows, together with an evaluation of management options. In the context of an integrated and interdisciplinary environmental assessment (IEA) of nutrient flows, we present and discuss the application of the nutrient emission model MONERIS (MOdelling Nutrient Emissions into River Systems) to the Catalan river basin, La Tordera (north-east Spain), for the period 1996–2002. After a successful calibration and verification process (Nash-Sutcliffe efficiencies E=0.85 for phosphorus and E=0.86 for nitrogen), the application of the model MONERIS proved to be useful in estimating nutrient loads. Crucial for model calibration, in-stream retention was estimated to be about 50 % of nutrient emissions on an annual basis. Through this process, we identified the importance of point sources for phosphorus emissions (about 94% for 1996–2002), and diffuse sources, especially inputs via groundwater, for nitrogen emissions (about 31% for 1996–2002). Despite hurdles related to model structure, observed loads, and input data encountered during the modelling process, MONERIS provided a good representation of the major interannual and spatial patterns in nutrient emissions. An analysis of the model uncertainty and sensitivity to input data indicates that the model MONERIS, even in data-starved Mediterranean catchments, may be profitably used by water managers for evaluating quantitative nutrient emission scenarios for the purpose of managing river basins. As an example of scenario modelling, an analysis of the changes in nutrient emissions through two different future scenarios allowed the identification of a set of relevant measures to reduce nutrient loads.

Minimization of the experimental workload for the prediction of pollutants propagation in rivers. Mathematical modelling and knowledge re-use

The present thesis in focused on the minimization of experimental efforts for the prediction of pollutant propagation in rivers by mathematical modelling and knowledge re-use. Mathematical modelling is based on the well known advection-dispersion equation, while the knowledge re-use approach employs the methods of case based reasoning, graphical analysis and text mining. The thesis contribution to the pollutant transport research field consists of: (1) analytical and numerical models for pollutant transport prediction; (2) two novel techniques which enable the use of variable parameters along rivers in analytical models; (3) models for the estimation of pollutant transport characteristic parameters (velocity, dispersion coefficient and nutrient transformation rates) as functions of water flow, channel characteristics and/or seasonality; (4) the graphical analysis method to be used for the identification of pollution sources along rivers; (5) a case based reasoning tool for the identification of crucial information related to the pollutant transport modelling; (6) and the application of a software tool for the reuse of information during pollutants transport modelling research. These support tools are applicable in the water quality research field and in practice as well, as they can be involved in multiple activities. The models are capable of predicting pollutant propagation along rivers in case of both ordinary pollution and accidents. They can also be applied for other similar rivers in modelling of pollutant transport in rivers with low availability of experimental data concerning concentration. This is because models for parameter estimation developed in the present thesis enable the calculation of transport characteristic parameters as functions of river hydraulic parameters and/or seasonality. The similarity between rivers is assessed using case based reasoning tools, and additional necessary information can be identified by using the software for the information reuse. Such systems represent support for users and open up possibilities for new modelling methods, monitoring facilities and for better river water quality management tools. They are useful also for the estimation of environmental impact of possible technological changes and can be applied in the pre-design stage or/and in the practical use of processes as well.

Caracterización de la exposición ocupacional a los gases, dióxido de azufre (so2), sulfuro de hidrógeno (h2s), y monóxido de carbono (co), y la percepción de salud de los trabajadores, en una empresa del sector hidrocarburo en Colombia

En el proceso de extracción de petróleo (crudo) deben realizarse tratamientos físicos y químicos en estaciones de recolección del hidrocarburo con el fin de garantizar su calidad antes de su entrega para el transporte y comercialización. Para la realización de esta actividad el personal operativo requerido (operadores) debe realizar diferentes actividades, tales como ronda operacional, verificación de sistemas de almacenamiento del crudo, agua residual del proceso e insumos químicos utilizados en su tratamiento y manipulación de facilidades en las estaciones de recolección, entre otras. Como resultados de las actividades rutinarias los operadores están expuestos a factores de riesgo químico asociados a gases y vapores orgánicos generados en los procesos de tratamiento del crudo. En el presente trabajo se realizaron mediciones de calidad de aire e higiene industrial en diferentes estaciones tratamiento de crudo, con el propósito de evaluar los niveles de exposición de los operadores a gases y vapores de hidrocarburos durante el proceso de tratamiento de crudo y dar respuesta a la siguiente pregunta: ¿existe relación entre la exposición ocupacional, las emisiones atmosféricas de gases (SO2, CO, H2S) y la percepción de afectación de la salud de los trabajadores que se encuentran expuestos durante la actividad laboral, en una empresa del sector de hidrocarburos? Se realizó un estudio de corte transversal, mediante la aplicación de cuestionarios sobre las condiciones de trabajo y de salud a 30 trabajadores que laboran en una estación de tratamiento de crudo de una compañía del sector de hidrocarburos. Los operadores objeto de estudio laboran en turnos rotativos, han estado vinculados con la compañía por más de dos años y tienen contrato directo, adicionalmente, se identificaron los factores de riesgos ambientales y ocupacionales para el grupo de trabajadores y se realizó una revisión de los informes de medición de higiene industrial y de calidad de aire de las estaciones donde labora el personal seleccionado con el fin de establecer si los resultados se relacionan. Los resultados obtenidos indican que el 100% de los trabajadores son de género masculino y se desempeñan en cargos de operadores, recorredores de pozos de crudo y supervisores. El 97% de los operadores tiene más de cuarenta años de edad y el 80% de los mismos ha laborado por más de 6 años en la compañía. Acerca de la percepción de los trabajadores sobre su estado de salud el 90% afirma que su salud es buena, el 97% respondió que no presenta problemas respiratorios, el 23% manifiesta que presenta trastornos dermatológicos y el 27% indican que presenta dolor de cabeza constante. De la revisión de los informes de calidad de aire disponibles se encontró que las mediciones de Dióxido de Azufre SO2, Monóxido de Carbono CO se encuentran dentro del rango definido como el de menor impacto para la salud humana. De los datos del informe se puede concluir que la calidad del aire es buena en el 100% de las áreas de influencia de las estaciones de tratamiento de crudo. Según los informes de higiene industrial el 34% de las instalaciones presenta concentraciones de Sulfuro de Hidrógeno (H2S) en el límite permisible para exposiciones crónicas en un promedio ponderado de tiempo (TLV-TWA) y el límite permisible para exposiciones agudas en un límite de exposición a corto plazo (TLV-STEL). Solo el 37% de los trabajadores objeto de este estudio percibe el riesgo por la exposición a factores de riesgo químicos y son claramente consientes que se encuentran expuestos a estos riesgos por la manipulación de productos químicos y exposición a sustancias químicas producto de sus actividades rutinarias, el 73% no percibe el riesgo de exposición por su actividad laboral. Se recomienda que la compañía fortalezca su esquema de vigilancia para generar alternativas que eleven los niveles de consciencia del riesgo del trabajador. Los factores de riesgo ambiental y ocupacional, de los gases y vapores generados se deben al proceso de tratamiento de crudo, están mutuamente relacionados dado que al generarse una emisión y/o escape no controlado como consecuencia se tiene una afectación directa al medio ambiente y a los trabajadores.

Fatiga Laríngea: efectos del uso prolongado de la voz

La voz como herramienta de trabajo de los docentes, puede afectarse por su uso prolongado, abuso o conductas de mal uso, que desencadenan limitaciones funcionales de origen laboral. Uno de los síntomas más frecuentes de quienes usan masivamente su voz con fines ocupacionales es la fatiga laríngea (FL), o cansancio vocal por debilitamiento muscular. El presente estudio quasiexperimental longitudinal pre- postest evaluó el efecto que el uso de la voz, analizando variables sociodemográficas, de salud y trabajo, los estilos de vida y los factores de riesgo ocupacionales, pero principalmente el efecto que produce el uso prolongado de la voz sobre las variables físico acústicas después de un día de trabajo, en 99 docentes de una institución de educación superior en Colombia, en comparación con trabajadores con menor uso vocal. Se aplicó un cuestionario de sintomatología vocal para controlar los sesgos, se le tomaron grabaciones pre y post jornada a cada trabajador con el software Speech Analizer® y se reportaron los cambios subjetivos tras un día de trabajo a cada trabajador. Fueron hallados cambios en las variables físico – acústicas como efecto del uso prolongado de la voz después de un día de trabajo en los dos grupos de participantes, en cuyo caso el efecto fue más significativo en los docentes que en los administrativos – no docentes. El riesgo de presentar trastornos de la voz se asoció directamente con la exposición a factores de riesgo ocupacionales y aquellos asociados a condiciones de salud y al estilo de vida de los individuos, cuyas consecuencias fueron mayores para el grupo de docentes; dado que al ser la voz su principal herramienta de trabajo, el uso fue mayor y asimismo la probabilidad de desencadenar sintomatología vocal, derivada de la fatiga laríngea. La variable de fo promedio para la fonación sostenida de la vocal /a/, que representa una sonido neutro en tonalidad o el tono habitual, mostró diferencias significativas entre grupos (p=0,048). Para este caso, el grupo de docentes registró un aumento de la fo en el postest en comparación con un cambio no significativo para el grupo de administrativos luego del uso prolongado de la voz. En consecuencia, hubo diferencias en el valor registrado para la máxima fo (p =0,025), mínima fo (p=0,011) y el rango de fo (p=0,012) en la emisión sostenida de la vocal /a/. Para el caso del grupo de administrativos, las diferencias significativas estuvieron dadas por la disminución de la fo, rango y máxima y mínima frecuencia en las tres vocales (/a/, /i/, /o/) en contraste con lo ocurrido para el grupo de docentes. En la intensidad de la voz fueron encontradas también diferencias significativas entre grupos (p=0,001) con un decrecimiento del volumen en el postest, tanto promedio como mínimo, máximo y rango de la intensidad, en la fonación sostenida de la vocal /a/ para el grupo de docentes; ninguna significancia estadística fue hallada en el grupo de administrativos para estas variables. Se demostró a través de mediciones objetivas y resultados verificables, el fenómeno de la fatiga laríngea, asociados a los efectos que se presentan tras la demanda vocal continua, discriminando el impacto, entre las variables de cargo y género.

Modelling personal thermal sensations using C-Support Vector Classification (C-SVC) algorithm

The personalised conditioning system (PCS) is widely studied. Potentially, it is able to reduce energy consumption while securing occupants’ thermal comfort requirements. It has been suggested that automatic optimised operation schemes for PCS should be introduced to avoid energy wastage and discomfort caused by inappropriate operation. In certain automatic operation schemes, personalised thermal sensation models are applied as key components to help in setting targets for PCS operation. In this research, a novel personal thermal sensation modelling method based on the C-Support Vector Classification (C-SVC) algorithm has been developed for PCS control. The personal thermal sensation modelling has been regarded as a classification problem. During the modelling process, the method ‘learns’ an occupant’s thermal preferences from his/her feedback, environmental parameters and personal physiological and behavioural factors. The modelling method has been verified by comparing the actual thermal sensation vote (TSV) with the modelled one based on 20 individual cases. Furthermore, the accuracy of each individual thermal sensation model has been compared with the outcomes of the PMV model. The results indicate that the modelling method presented in this paper is an effective tool to model personal thermal sensations and could be integrated within the PCS for optimised system operation and control.

Environmental conditions and rodent infestation in Campo Limpo district, Sao Paulo municipality, Brazil

Rodents are involved in the transmission to human beings of several diseases, including liptospirosis, which shows high lethality rates in Sao Paulo municipality. Despite this, few studies have assessed the relationship existing between urban environmental conditions and building rodent infestation. With the purpose of clarifying this relationship, an analysis has been conducted in order to quantify the influence of environmental factors upon rodent infestation on a low-income district. Diagnosis of the environmental situation has been performed to evaluate the frequency according to which harborage, food and access sources occur, and a survey on infestation rates in 2175 dwellings in the area studied. The logistic regression analysis showed that among the environmental variables, the one that showed the closest association with rodent infestation was access; followed by harborage, and food. It was concluded that poor socioeconomic and environmental conditions in the area propitiate the occurrence of high rodent infestation rates.

Characterization of Metal and Trace Element Contents of Particulate Matter (PM10) Emitted by Vehicles Running on Brazilian FuelsHydrated Ethanol and Gasoline with 22% of Anhydrous Ethanol

Emission of fine particles by mobile sources has been a matter of great concern due to its potential risk both to human health and the environment. Although there is no evidence that one sole component may be responsible for the adverse health outcomes, it is postulated that the metal particle content is one of the most important factors, mainly in relation to oxidative stress. Data concerning the amount and type of metal particles emitted by automotive vehicles using Brazilian fuels are limited. The aim of this study was to identify inhalable particles (PM10) and their trace metal content in two light-duty vehicles where one was fueled with ethanol while the other was fueled with gasoline mixed with 22% of anhydrous ethanol (gasohol); these engines were tested on a chassis dynamometer. The elementary composition of the samples was evaluated by the particle-induced x-ray emission technique. The experiment showed that total emission factors ranged from 2.5 to 11.8 mg/km in the gasohol vehicle, and from 1.2 to 3 mg/km in the ethanol vehicle. The majority of particles emitted were in the fine fraction (PM2.5), in which Al, Si, Ca, and Fe corresponded to 80% of the total weight. PM10 emissions from the ethanol vehicle were about threefold lower than those of gasohol. The elevated amount of fine particulate matter is an aggravating factor, considering that these particles, and consequently associated metals, readily penetrate deeply into the respiratory tract, producing damage to lungs and other tissues.