Exploring respiration and respiratory electron transport system (ETS) in Ulva spp.

[ES] Respiration is a key ecological index. For either individuals or communities, it can be use to assess carbon and energy, demand and expenditure as well as carbon flow rates through food webs. When combined with productivity measurements it can establish the level of metabolic balance. When combined with measurements of respiratory capacity, it can indicate physiological state. Here, we report pilot studies the metabolism of the green algae, Ulva rotundata that inhabits intertidal pools of Gran Canaria. As a starting point we used the electron transport system (ETS) to differentiate between different growing conditions in the natural environment. We suspected different levels of stress associated with these conditions and looked for the influence of this stress in the ETS measurements. This technique has been successfully applied to study bacteria, phytoplankton and zooplankton in the ocean, but it has not been used to study sessile marine macroalgae. These neritic and littoral macrophytes have major ecological and industrial importance, yet little is known about their respiratory physiology. Such knowledge would strengthen our understanding of the resources of the coastal ocean and facilitate its development and best use. Here, we modified the ETS methodology for Ulva rotundata. With this modified ETS assay we investigated the capacity of Ulva to resist anoxia. We measured respiration with optodes (Fibox 4, Presens) in the dark to the point of oxygen exhaustion and through 24 h of anoxia. Then we exposed the Ulva to light and followed the oxygen increase due to photosynthesis. We discuss here the capacity of Ulva to survive during anoxia.

Development of a fluorescent method for the detection in marine organisms of the respiratory electron transport system

Trabajo realizado por: Maldonado, F.; Packard, T.; Gómez, M.; Santana Rodríguez, J. J

Respiratory electron transport activity in plankton: determinants and detection

[ES]La presente tesis, se centra en el estudio del Sistema de Transporte de Electrones (ETS) en organismos del plancton marino, los factores que lo influencian la interpretación de estas mediciones y su detección mediante espectrofotometría y espectrofluorometría, en muestras oceánicas naturales y en cultivos de organismos marinos. Se pudo establecer, la biomasa, la respiración (R) y la respiración potencial (ɸ), en tres transectos en los océanos Índico y Atlántico Norte Sur. A su vez, se determino el estado fisiológico, en tres tamaños del zooplancton, midiendo la relación R/ɸ. Se exploró los efectos de la inanición sobre la R y la variación con respecto a la ɸ en el zooplancton

Der enzymatische und anti-oxidative Mechanismus des anti-atherogenen Enzyms Paraoxonase-2

Das humane Enzym PON2 ist in eine Vielzahl pathophysiologischer Prozesse involviert und ist durch zwei Funktionen gekennzeichnet - eine enzymatische Laktonase-Aktivität und eine anti-oxidative Aktivität. Durch die Laktonase-Aktivität hydrolysiert PON2 vorwiegend das bakterielle Signalmolekül 3oxoC12. PON2 ist als Bestandteil des angeborenen Immunsystems anzusehen und trägt wahrscheinlich zur Immunabwehr gegen Infektionen mit den human-pathogenen Pseudomonas aeruginosa Bakterien bei. Durch die anti-oxidative Aktivität vermindert PON2 oxidative Schäden und verringert redox-abhängige pro-apoptotische Stimulation. Diese einzigartige Funktion von PON2 ist jedoch ambivalent zu betrachten, da hohe PON2-Spiegel zwar Arteriosklerose reduzieren können, aber im Verdacht stehen Tumorzellen zu stabilisieren.rnIn dieser Arbeit wurden die noch unbekannten Mechanismen und der Zusammenhang der enzymatischen und der anti-oxidativen Aktivität analysiert. In diesem Rahmen wurde gezeigt, dass PON2 spezifisch die Superoxidfreisetzung an Komplex I und III der Atmungskette in der inneren Mitochondrienmembran reduzieren kann. PON2 veränderte dabei weder die Aktivitäten der Superoxiddismutasen noch die Cytochrom C-Expression. Weiterhin konnte in dieser Arbeit erstmals gezeigt werden, dass PON2 O2- nicht direkt abbaut, sondern vielmehr dessen Bildung verhindert. Diese Erkenntnisse implizieren, dass PON2 die anti-oxidative Aktivität über eine Beeinflussung des Quinon-Pools vermittelt. Anhand von verschiedenen Punktmutationen konnte gezeigt werden, dass die Histidinreste-114 und -133 für die Laktonase-Aktivität essentiell sind. Weiterhin wurden die Glykosylierungsstellen von PON2 identifiziert und gezeigt, dass die Glykosylierung, nicht aber der natürliche Polymorphismus Ser/Cys311 für die Laktonase-Aktivität von Bedeutung ist. Von besonderer Bedeutung ist, dass keine dieser Mutationen die anti-oxidative Aktivität beeinflusste, wodurch erstmals die Unabhängigkeit der beiden Funktionen von PON2 gezeigt werden konnte. rnEs war bekannt, dass PON2 gegen intrinsische und ER-Stress-induzierte Apoptose schützt. Die Spezifität der anti-oxidativen / anti-apoptotischen Wirkung wurde hier an einem weiteren pathophysiologischen Modell untersucht. 7-Ketocholesterol (7-KC) ist der Hauptbestandteil des pro-arteriosklerotischen oxLDL und verursacht in Zellen des Gefäßsystems ER-Stress, oxidativen Stress und Apoptose. Unerwarteterweise konnte PON2 Endothelzellen nicht gegen den 7-KC-induzierten Zelltod schützen. Mehrere unabhängige experimentelle Ansätze belegen, dass 7-KC in Endothelzellen im Gegensatz zu Gefäßmuskelzellen den Zelltod über Autophagie und nicht über ER-Stress oder intrinsische Apoptose bewirkt. Weiterhin führt 7-KC, wie auch 3oxoC12 und Thapsigargin zu einem Abbau der PON2-mRNA, die über die 5’UTR der PON2-mRNA vermittelt wird. Diese Arbeit vermittelt detaillierte mechanistische Einsichten in die Funktionen von PON2, die für ihre Rolle bei Arteriosklerose, in der körpereigenen Immunabwehr und bei Krebs entscheidend sind.rn

Improvement of photon transport model by including coupled photon-electron transport and kernel refinement

The first part of this work deals with the inverse problem solution in the X-ray spectroscopy field. An original strategy to solve the inverse problem by using the maximum entropy principle is illustrated. It is built the code UMESTRAT, to apply the described strategy in a semiautomatic way. The application of UMESTRAT is shown with a computational example. The second part of this work deals with the improvement of the X-ray Boltzmann model, by studying two radiative interactions neglected in the current photon models. Firstly it is studied the characteristic line emission due to Compton ionization. It is developed a strategy that allows the evaluation of this contribution for the shells K, L and M of all elements with Z from 11 to 92. It is evaluated the single shell Compton/photoelectric ratio as a function of the primary photon energy. It is derived the energy values at which the Compton interaction becomes the prevailing process to produce ionization for the considered shells. Finally it is introduced a new kernel for the XRF from Compton ionization. In a second place it is characterized the bremsstrahlung radiative contribution due the secondary electrons. The bremsstrahlung radiation is characterized in terms of space, angle and energy, for all elements whit Z=1-92 in the energy range 1–150 keV by using the Monte Carlo code PENELOPE. It is demonstrated that bremsstrahlung radiative contribution can be well approximated with an isotropic point photon source. It is created a data library comprising the energetic distributions of bremsstrahlung. It is developed a new bremsstrahlung kernel which allows the introduction of this contribution in the modified Boltzmann equation. An example of application to the simulation of a synchrotron experiment is shown.

Evolutionäre Veränderungen in der Nutzung redox-aktiver Aminosäuren und ihre Ursachen

Gewebe, Zellen und speziell Zellkompartimente unterscheiden sich in ihrer Sauerstoffkonzentration, Stoffwechselrate und in der Konzentration an gebildeten reaktiven Sauerstoffspezies. Um eine mögliche Änderung in der Aminosäurennutzung durch den Einfluss von Sauerstoff und seinen reaktiven Spezies untersuchen zu können wurden, Bereiche bzw. Kompartimente der menschlichen Zelle definiert, die einen Referenzrahmen bildeten und bekannt dafür sind, einen relativ hohen Grad an reaktiven Sauerstoffspezies aufzuweisen. Aus dem Vergleich wurde deutlich, dass vor allem die beiden redox-aktiven und schwefeltragenden Aminosäuren Cystein und Methionin durch eine besondere Verteilung und Nutzung charakterisiert sind. Cystein ist hierbei diejenige Aminosäure mit den deutlichsten Änderungen in den fünf untersuchten Modellen der oxidativen Belastung. In all diesen Modellen war die Nutzung von Cystein deutlich reduziert, wohingegen Methionin in Proteinen des Mitochondriums und der Elektronentransportkette angereichert war. Dieser auf den ersten Blick paradoxe Unterschied zwischen Cystein und Methionin wurde näher untersucht, indem die differenzierte Methioninnutzung in verschiedenen Zellkompartimenten von Homo sapiens charakterisiert wurde.rnDie sehr leicht zu oxidierende Aminosäure Methionin zeigt ein ungewöhnliches Verteilungsmuster in ihrer Nutzungshäufigkeit. Entgegen mancher Erwartung wird Methionin in zellulären Bereichen hoher oxidativer Belastung und starker Radikalproduktion intensiv verwendet. Dieses Verteilungsmuster findet man sowohl im intrazellulären Vergleich, als auch im Vergleich verschiedener Spezies untereinander, was daraufhin deutet, dass es einen lokalen Bedarf an redox-aktiven Aminosäuren gibt, der einen sehr starken Effekt auf die Nutzungshäufigkeit von Methionin ausübt. Eine hohe Stoffwechselrate, die im Allgemeinen mit einer erhöhten Produktion von Oxidantien assoziiert wird, scheint ein maßgeblicher Faktor der Akkumulation von Methionin in Proteinen der Atmungskette zu sein. Die Notwendigkeit, oxidiertes Antioxidans wieder zu reduzieren, findet auch bei Methionin Anwendung, denn zu Methioninsulfoxid oxidiertes Methionin wird durch die Methioninsulfoxidreduktase wieder zu Methionin reduziert. Daher kann die spezifische Akkumulation von Methionin in Proteinen, die verstärkt reaktiven Sauerstoffspezies ausgesetzt sind, als eine systematische Strategie angesehen werden, um andere labile Strukturen vor ungewollter Oxidation zu schützen. rnDa Cystein in allen untersuchten Modellen der oxidativen Belastung und im Besonderen in Membranproteinen der inneren Mitochondrienmembran lebensspannenabhängig depletiert war, wurde dieses Merkmal näher untersucht. Deshalb wurde die Hypothese getestet, ob ein besonderer Redox-Mechanismus der Thiolfunktion für diese selektive Depletion einer im Allgemeinen als harmlos oder antioxidativ geltenden Aminosäure verantwortlich ist. Um den Effekt von Cysteinresten in Membranen nachzustellen, wurden primäre humane Lungenfibroblasten (IMR90) mit diversen Modellsubstanzen behandelt. Geringe Konzentrationen der lipophilen Substanz Dodecanthiol verursachten eine signifikante Toxizität in IMR90-Zellen, die von einer schnellen Zunahme an polyubiquitinierten Proteinen und anderen Indikatoren des proteotoxischen Stresses, wie Sequestosom 1 (P62), HSP70 und HSP90 begleitet wurde. Dieser Effekt konnte spezifisch der Chemie der Thiolfunktion in Membranen zugeordnet werden, da Dodecanol (DOH), Dodecylmethylsulfid (DMS), Butanthiol oder wasserlösliche Thiole weder eine cytotoxische Wirkung noch eine Polyubiquitinierung von Proteinen verursachten. Die Ergebnisse stimmen mit der Hypothese überein, dass Thiole innerhalb von biologischen Membranen als radikalische Kettentransferagentien wirken. Diese Eigenschaft wird in der Polymerchemie durch Nutzung von lipophilen Thiolen in hydrophoben Milieus technisch für die Produktion von Polymeren benutzt. Da die Thiylradikal-spezifische Reaktion von cis-Fettsäuren zu trans-Fettsäuren in 12SH behandelten Zellen verstärkt ablief, kann gefolgert werden, dass 12SH zellulär radikalisiert wurde. In lebenden Organismen kann demnach die Oxidation von Cystein die Schädigung von Membranen beschleunigen und damit Einfallstore für die laterale Radikalisierung von integralen Membranproteinen schaffen, welche möglicherweise der Langlebigkeit abträglich ist, zumindest, wenn sie in der inneren Mitochondrienmembran auftritt.

Electron transport in E x B devices

A Hall thruster, an E × B device used for in-space propulsion, utilizes an axial electric field to electrostatically accelerate plasma propellant from the spacecraft. The axial electric field is created by positively biasing the anode so that the positivelycharged ions may be accelerated (repelled) from the thruster, which produces thrust. However, plasma electrons are much smaller than ions and may be accelerated much more quickly toward the anode; if electrons were not impeded, a "short circuit" due to the electron flow would eliminate the thrust mechanism. Therefore, a magnetic field serves to "magnetize" plasma electrons internal to the thruster and confines them in gyro-orbits within the discharge channel. Without outside factors electrons would be confined indefinitely; however, electron-neutral collisions provide a mechanism to free electrons from their orbits allowing electrons to cross the magnetic field toward the anode, where this process is described by classical transport theory. To make matters worse, cross-field electron transport has been observed to be 100-1000 times that predicted by classical collisional theory, providing an efficiency loss mechanism and an obstacle for modeling and simulations in Hall thrusters. The main difficulty in studying electron transport in Hall thrusters is the coupling that exists between the plasma and the fields, where the plasma creates and yet is influenced by the electric field. A device has been constructed at MTU’s Isp Lab, the Hall Electron Mobility Gage, which was designed specifically to study electron transport in E × B devices, where the coupling between the plasma and electric field was virtually eliminated. In this device the two most cited contributors to electron transport in Hall thrusters, fluctuation-induced transport, and wall effects, were absent. Removing the dielectric walls and plasma fluctuations, while maintaining the field environment in vacuum, has allowed the study of electron dynamics in Hall thruster fields where the electrons behave as test particles in prescribed fields, greatly simplifying the environment. Therefore, it was possible to observe any effects on transport not linked to the cited mechanisms, and it was possible to observe trends of the enhanced mobility with control parameters of electric and magnetic fields and neutral density– parameters that are not independently variable in a Hall thruster. The result of the investigation was the observation of electron transport that was ~ 20-100 times the classical prediction. The cross-field electron transport in the Mobility Gage was generally lower than that found in a Hall thruster so these findings do not negate the possibility of fluctuations and/or wall collisions contributing to transport in a Hall thruster. However, this research led to the observation of enhanced cross-field transport that had not been previously isolated in Hall thruster fields, which is not reliant on momentum-transfer collisions, wall collisions or fluctuations.

Electron transport in molecular systems

The remarkable advances in nanoscience and nanotechnology over the last two decades allow one to manipulate individuals atoms, molecules and nanostructures, make it possible to build devices with only a few nanometers, and enhance the nano-bio fusion in tackling biological and medical problems. It complies with the ever-increasing need for device miniaturization, from magnetic storage devices, electronic building blocks for computers, to chemical and biological sensors. Despite the continuing efforts based on conventional methods, they are likely to reach the fundamental limit of miniaturization in the next decade, when feature lengths shrink below 100 nm. On the one hand, quantum mechanical efforts of the underlying material structure dominate device characteristics. On the other hand, one faces the technical difficulty in fabricating uniform devices. This has posed a great challenge for both the scientific and the technical communities. The proposal of using a single or a few organic molecules in electronic devices has not only opened an alternative way of miniaturization in electronics, but also brought up brand-new concepts and physical working mechanisms in electronic devices. This thesis work stands as one of the efforts in understanding and building of electronic functional units at the molecular and atomic levels. We have explored the possibility of having molecules working in a wide spectrum of electronic devices, ranging from molecular wires, spin valves/switches, diodes, transistors, and sensors. More specifically, we have observed significant magnetoresistive effect in a spin-valve structure where the non-magnetic spacer sandwiched between two magnetic conducting materials is replaced by a self-assembled monolayer of organic molecules or a single molecule (like a carbon fullerene). The diode behavior in donor(D)-bridge(B)-acceptor(A) type of single molecules is then discussed and a unimolecular transistor is designed. Lastly, we have proposed and primarily tested the idea of using functionalized electrodes for rapid nanopore DNA sequencing. In these studies, the fundamental roles of molecules and molecule-electrode interfaces on quantum electron transport have been investigated based on first-principles calculations of the electronic structure. Both the intrinsic properties of molecules themselves and the detailed interfacial features are found to play critical roles in electron transport at the molecular scale. The flexibility and tailorability of the properties of molecules have opened great opportunity in a purpose-driven design of electronic devices from the bottom up. The results that we gained from this work have helped in understanding the underlying physics, developing the fundamental mechanism and providing guidance for future experimental efforts.

Water transport in complex, non-wetting porous layers with applications to water management in low temperature fuel cells

An experimental setup was designed to visualize water percolation inside the porous transport layer, PTL, of proton exchange membrane, PEM, fuel cells and identify the relevant characterization parameters. In parallel with the observation of the water movement, the injection pressure (pressure required to transport water through the PTL) was measured. A new scaling for the drainage in porous media has been proposed based on the ratio between the input and the dissipated energies during percolation. A proportional dependency was obtained between the energy ratio and a non-dimensional time and this relationship is not dependent on the flow regime; stable displacement or capillary fingering. Experimental results show that for different PTL samples (from different manufacturers) the proportionality is different. The identification of this proportionality allows a unique characterization of PTLs with respect to water transport. This scaling has relevance in porous media flows ranging far beyond fuel cells. In parallel with the experimental analysis, a two-dimensional numerical model was developed in order to simulate the phenomena observed in the experiments. The stochastic nature of the pore size distribution, the role of the PTL wettability and morphology properties on the water transport were analyzed. The effect of a second porous layer placed between the porous transport layer and the catalyst layer called microporous layer, MPL, was also studied. It was found that the presence of the MPL significantly reduced the water content on the PTL by enhancing fingering formation. Moreover, the presence of small defects (cracks) within the MPL was shown to enhance water management. Finally, a corroboration of the numerical simulation was carried out. A threedimensional version of the network model was developed mimicking the experimental conditions. The morphology and wettability of the PTL are tuned to the experiment data by using the new energy scaling of drainage in porous media. Once the fit between numerical and experimental data is obtained, the computational PTL structure can be used in different types of simulations where the conditions are representative of the fuel cell operating conditions.

MULTISCALE EXAMINATION AND MODELING OF ELECTRON TRANSPORT IN NANOSCALE MATERIALS AND DEVICES

For half a century the integrated circuits (ICs) that make up the heart of electronic devices have been steadily improving by shrinking at an exponential rate. However, as the current crop of ICs get smaller and the insulating layers involved become thinner, electrons leak through due to quantum mechanical tunneling. This is one of several issues which will bring an end to this incredible streak of exponential improvement of this type of transistor device, after which future improvements will have to come from employing fundamentally different transistor architecture rather than fine tuning and miniaturizing the metal-oxide-semiconductor field effect transistors (MOSFETs) in use today. Several new transistor designs, some designed and built here at Michigan Tech, involve electrons tunneling their way through arrays of nanoparticles. We use a multi-scale approach to model these devices and study their behavior. For investigating the tunneling characteristics of the individual junctions, we use a first-principles approach to model conduction between sub-nanometer gold particles. To estimate the change in energy due to the movement of individual electrons, we use the finite element method to calculate electrostatic capacitances. The kinetic Monte Carlo method allows us to use our knowledge of these details to simulate the dynamics of an entire device— sometimes consisting of hundreds of individual particles—and watch as a device ‘turns on’ and starts conducting an electric current. Scanning tunneling microscopy (STM) and the closely related scanning tunneling spectroscopy (STS) are a family of powerful experimental techniques that allow for the probing and imaging of surfaces and molecules at atomic resolution. However, interpretation of the results often requires comparison with theoretical and computational models. We have developed a new method for calculating STM topographs and STS spectra. This method combines an established method for approximating the geometric variation of the electronic density of states, with a modern method for calculating spin-dependent tunneling currents, offering a unique balance between accuracy and accessibility.