Promoting Biodiversity in Forest Ecosystems Using Ecological Forestry

A subset of forest management techniques, termed ecological forestry, have been developed in order to produce timber and maintain the ecological integrity of forest communities through practices that more closely mirror natural disturbance regimes. Even though alternative methods have been described and tested, these approaches still need to be established and analyzed in a variety of geographic regions in order to calibrate and measure effectiveness across different forest types. The primary objective of this research project was to assess whether group selection combined with legacy-tree retention could enhance mid-tolerant tree recruitment in a late-successional northern hardwood forest. In order to evaluate a novel alternative regeneration technique, 49 group-selection openings in three size classes were created in 2003 with a biological legacy tree retained in the center of each opening. Twenty reference sites, managed using single-tree selection, were also analyzed for comparison. The specific goals of the project were to: 1) determine the fate and persistence of the openings and legacy trees 2) assess the understory response of the group-selection openings versus the single-tree selection reference sites, and 3) evaluate the spatial patterns of yellow birch (Betula alleghaniensis Britt.) and eastern hemlock (Tsuga canadensis (L.) Carr.) in the group-selection openings. The results from 8-9 years post-study implementation and the changes that have occurred between 2004/5 and 2011/12 are discussed. The alternative regeneration technique developed and assessed in this study has the potential to enrich biodiversity in a range of forest types. Projected group-selection opening persistence rates ranged from 41-91 years. Openings from 500-1500 m2 are predicted to persist long enough for mid-tolerant tree recruitment. The legacy trees responded well to release and experienced a low mortality rate. Yellow birch (the primary shade mid-tolerant tree in the study area) densities increased with opening size. Maples surpassed all other species in abundance. In the sapling layer, sugar maple (Acer saccharum Marsh.) was 2 to over 300 times more abundant in the group-selection openings and 2 to 3 times more abundant in the references sites than all other species present. Red maple (Acer rubrum L.) was the second most abundant species present in the openings and reference sites. Spatial patterns of yellow birch and eastern hemlock in the openings were mostly aggregated. The southern edges of the largest openings contained the highest magnitude of yellow birch and eastern hemlock per unit area. Continued monitoring and additional treatments will likely be necessary in order to ensure underrepresented species successfully reach maturity.

Book Review of “Human Behaviour and the Social Environment: Models, Metaphors, and Maps for Applying Theoretical Perspectives to Practice”. 640 pages, Thomson Brooks/Cole, 2007, by James A. Forte

This voluminous book which draws on almost 1000 references provides an important theoretical base for practice. After an informative introduction about models, maps and metaphors, Forte provides an impressive presentation of several perspectives for use in practice; applied ecological theory, applied system theory, applied biology, applied cognitive science, applied psychodynamic theory, applied behaviourism, applied symbolic interactionism, applied social role theory, applied economic theory, and applied critical theory. Finally he completes his book with a chapter on “Multi theory practice and routes to integration.”

Choosing and using diversity indices: insights for ecological applications from the German Biodiversity Exploratories

Biodiversity, a multidimensional property of natural systems, is difficult to quantify partly because of the multitude of indices proposed for this purpose. Indices aim to describe general properties of communities that allow us to compare different regions, taxa, and trophic levels. Therefore, they are of fundamental importance for environmental monitoring and conservation, although there is no consensus about which indices are more appropriate and informative. We tested several common diversity indices in a range of simple to complex statistical analyses in order to determine whether some were better suited for certain analyses than others. We used data collected around the focal plant Plantago lanceolata on 60 temperate grassland plots embedded in an agricultural landscape to explore relationships between the common diversity indices of species richness (S), Shannon's diversity (H'), Simpson's diversity (D-1), Simpson's dominance (D-2), Simpson's evenness (E), and Berger-Parker dominance (BP). We calculated each of these indices for herbaceous plants, arbuscular mycorrhizal fungi, aboveground arthropods, belowground insect larvae, and P.lanceolata molecular and chemical diversity. Including these trait-based measures of diversity allowed us to test whether or not they behaved similarly to the better studied species diversity. We used path analysis to determine whether compound indices detected more relationships between diversities of different organisms and traits than more basic indices. In the path models, more paths were significant when using H', even though all models except that with E were equally reliable. This demonstrates that while common diversity indices may appear interchangeable in simple analyses, when considering complex interactions, the choice of index can profoundly alter the interpretation of results. Data mining in order to identify the index producing the most significant results should be avoided, but simultaneously considering analyses using multiple indices can provide greater insight into the interactions in a system.

Wetland maps including open water extent dynamics based on ENVISAT ASAR WS for Siberia, 2007 and 2008, links to GeoTIFFs

Wetlands store large amounts of carbon, and depending on their status and type, they release specific amounts of methane gas to the atmosphere. The connection between wetland type and methane emission has been investigated in various studies and utilized in climate change monitoring and modelling. For improved estimation of methane emissions, land surface models require information such as the wetland fraction and its dynamics over large areas. Existing datasets of wetland dynamics present the total amount of wetland (fraction) for each model grid cell, but do not discriminate the different wetland types like permanent lakes, periodically inundated areas or peatlands. Wetland types differently influence methane fluxes and thus their contribution to the total wetland fraction should be quantified. Especially wetlands of permafrost regions are expected to have a strong impact on future climate due to soil thawing. In this study ENIVSAT ASAR Wide Swath data was tested for operational monitoring of the distribution of areas with a long-term SW near 1 (hSW) in northern Russia (SW = degree of saturation with water, 1 = saturated), which is a specific characteristic of peatlands. For the whole northern Russia, areas with hSW were delineated and discriminated from dynamic and open water bodies for the years 2007 and 2008. The area identified with this method amounts to approximately 300,000 km**2 in northern Siberia in 2007. It overlaps with zones of high carbon storage. Comparison with a range of related datasets (static and dynamic) showed that hSW represents not only peatlands but also temporary wetlands associated with post-forest fire conditions in permafrost regions. Annual long-term monitoring of change in boreal and tundra environments is possible with the presented approach. Sentinel-1, the successor of ENVISAT ASAR, will provide data that may allow continuous monitoring of these wetland dynamics in the future complementing global observations of wetland fraction.

Secchi depth maps for the Baltic Sea, 2003-2012, with links to GeoTIFs

Secchi depth is a measure of water transparency. In the Baltic Sea region, Secchi depth maps are used to assess eutrophication and as input for habitat models. Due to their spatial and temporal coverage, satellite data would be the most suitable data source for such maps. But the Baltic Sea's optical properties are so different from the open ocean that globally calibrated standard models suffer from large errors. Regional predictive models that take the Baltic Sea's special optical properties into account are thus needed. This paper tests how accurately generalized linear models (GLMs) and generalized additive models (GAMs) with MODIS/Aqua and auxiliary data as inputs can predict Secchi depth at a regional scale. It uses cross-validation to test the prediction accuracy of hundreds of GAMs and GLMs with up to 5 input variables. A GAM with 3 input variables (chlorophyll a, remote sensing reflectance at 678 nm, and long-term mean salinity) made the most accurate predictions. Tested against field observations not used for model selection and calibration, the best model's mean absolute error (MAE) for daily predictions was 1.07 m (22%), more than 50% lower than for other publicly available Baltic Sea Secchi depth maps. The MAE for predicting monthly averages was 0.86 m (15%). Thus, the proposed model selection process was able to find a regional model with good prediction accuracy. It could be useful to find predictive models for environmental variables other than Secchi depth, using data from other satellite sensors, and for other regions where non-standard remote sensing models are needed for prediction and mapping. Annual and monthly mean Secchi depth maps for 2003-2012 come with this paper as Supplementary materials.

Environmental variables and multivariate seabed classification maps via k means clustering of Potter Cove, Antarctica, link to input and result files in GeoTIFF format

This study subdivides the Potter Cove, King George Island, Antarctica, into seafloor regions using multivariate statistical methods. These regions are categories used for comparing, contrasting and quantifying biogeochemical processes and biodiversity between ocean regions geographically but also regions under development within the scope of global change. The division obtained is characterized by the dominating components and interpreted in terms of ruling environmental conditions. The analysis includes in total 42 different environmental variables, interpolated based on samples taken during Australian summer seasons 2010/2011 and 2011/2012. The statistical errors of several interpolation methods (e.g. IDW, Indicator, Ordinary and Co-Kriging) with changing settings have been compared and the most reasonable method has been applied. The multivariate mathematical procedures used are regionalized classification via k means cluster analysis, canonical-correlation analysis and multidimensional scaling. Canonical-correlation analysis identifies the influencing factors in the different parts of the cove. Several methods for the identification of the optimum number of clusters have been tested and 4, 7, 10 as well as 12 were identified as reasonable numbers for clustering the Potter Cove. Especially the results of 10 and 12 clusters identify marine-influenced regions which can be clearly separated from those determined by the geological catchment area and the ones dominated by river discharge.

Global Ocean Biomes: Mean and time-varying maps (NetCDF 7.8 MB)

Large-scale studies of ocean biogeochemistry and carbon cycling have often partitioned the ocean into regions along lines of latitude and longitude despite the fact that spatially more complex boundaries would be closer to the true biogeography of the ocean. Herein, we define 17 open-ocean biomes classified from four observational data sets: sea surface temperature (SST), spring/summer chlorophyll a concentrations (Chl a), ice fraction, and maximum mixed layer depth (maxMLD) on a 1° × 1° grid. By considering interannual variability for each input, we create dynamic ocean biome boundaries that shift annually between 1998 and 2010. Additionally we create a core biome map, which includes only the grid cells that do not change biome assignment across the 13 years of the time-varying biomes. These biomes can be used in future studies to distinguish large-scale ocean regions based on biogeochemical function.

Distribution of planktonic foraminifera in the Southern Ocean (maps)

There are about 30 species of planktonic Foraminifera, as contrasted with the more than 4200 benthic species in the oceans of the world. Most of the planktonic species belong to the families Globigerinidae and Globorotaliidae. Of the 30 species, 9 occur in Antarctic and Subantarctic waters; however, none of these cold-water species are restricted to the Southern Ocean, except possibly the newly recognized Globorotalia cavernula (Be, 1967b). These species are distributed in broad zones of similar temperature in both the Northern and Southern Hemispheres. Hence, it is not possible to refer to these species as endemic to the Antarctic or Subantarctic, although some of them do appear in very high concentrations of 10 specimens/m**3 or more in the Antarctic regions. The plankton samples upon which the accompanying maps are based were collected between 1960 and 1965 on the research vessels Eltanin of the National Science Foundation (U.S. Antarctic Research Program), and Vema and Conrad of the Lamont Geological Observatory. All surface (0 m to 10 m) and vertical (0 m to 300 m) tows were obtained with plankton nets of uniform mesh size and material (NITEX202 = 202 µm mesh-aperture width) and were provided with flowmeters for quantitative readings of amounts of water filtered.

Deforesting Europe: pollen-inferred Holocene land cover change using the 'pseudobiomization' approach

Maps of continental-scale land cover are utilized by a range of diverse users but whilst a range of products exist that describe present and recent land cover in Europe, there are currently no datasets that describe past variations over long time-scales. User groups with an interest in past land cover include the climate modelling community, socio-ecological historians and earth system scientists. Europe is one of the continents with the longest histories of land conversion from forest to farmland, thus understanding land cover change in this area is globally significant. This study applies the pseudobiomization method (PBM) to 982 pollen records from across Europe, taken from the European Pollen Database (EPD) to produce a first synthesis of pan-European land cover change for the period 9000 BP to present, in contiguous 200 year time intervals. The PBM transforms pollen proportions from each site to one of eight land cover classes (LCCs) that are directly comparable to the CORINE land cover classification. The proportion of LCCs represented in each time window provides a spatially aggregated record of land cover change for temperate and northern Europe, and for a series of case study regions (western France, the western Alps, and the Czech Republic and Slovakia). At the European scale, the impact of Neolithic food producing economies appear to be detectable from 6000 BP through reduction in broad-leaf forests resulting from human land use activities such as forest clearance. Total forest cover at a pan-European scale moved outside the range of previous background variability from 4000 BP onwards. From 2200 BP land cover change intensified, and the broad pattern of land cover for preindustrial Europe was established by 1000 BP. Recognizing the timing of anthropogenic land cover change in Europe will further the understanding of land cover-climate interactions, and the origins of the modern cultural landscape.

Estrategias innovadoras para la gestión del riesgo de sequía en sistemas ganaderos extensivos

La vulnerabilidad de los sistemas ganaderos de pastoreo pone en evidencia la necesidad de herramientas para evaluar y mitigar los efectos de la sequía. El avance en la teledetección ha despertado el interés por explotar potenciales aplicaciones, y está dando lugar a un intenso desarrollo de innovaciones en distintos campos. Una de estas áreas es la gestión del riesgo climático, en donde la utilización de índices de vegetación permite la evaluación de la sequía. En esta investigación, se analiza el impacto de la sequía y se evalúa el potencial de nuevas tecnologías como la teledetección para la gestión del riesgo de sequía en sistemas de ganadería extensiva. Para ello, se desarrollan tres aplicaciones: (i) evaluar el impacto económico de la sequía en una explotación ganadera extensiva de la dehesa de Andalucía, (ii) elaborar mapas de vulnerabilidad a la sequía en pastos de Chile y (iii) diseñar y evaluar el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. En la primera aplicación, se diseña un modelo dinámico y estocástico que integra aspectos climáticos, ecológicos, agronómicos y socioeconómicos para evaluar el riesgo de sequía. El modelo simula una explotación ganadera tipo de la dehesa de Andalucía para el período 1999-2010. El método de Análisis Histórico y la simulación de MonteCarlo se utilizan para identificar los principales factores de riesgo de la explotación, entre los que destacan, los periodos de inicios del verano e inicios de invierno. Los resultados muestran la existencia de un desfase temporal entre el riesgo climático y riesgo económico, teniendo este último un periodo de duración más extenso en el tiempo. También, revelan que la intensidad, frecuencia y duración son tres atributos cruciales que determinan el impacto económico de la sequía. La estrategia de reducción de la carga ganadera permite aminorar el riesgo, pero conlleva una disminución en el margen bruto de la explotación. La segunda aplicación está dedicada a la elaboración de mapas de vulnerabilidad a la sequia en pastos de Chile. Para ello, se propone y desarrolla un índice de riesgo económico (IRESP) sencillo de interpretar y replicable, que integra factores de riesgo y estrategias de adaptación para obtener una medida del Valor en Riesgo, es decir, la máxima pérdida esperada en un año con un nivel de significación del 5%.La representación espacial del IRESP pone en evidencia patrones espaciales y diferencias significativas en la vulnerabilidad a la sequía a lo largo de Chile. Además, refleja que la vulnerabilidad no siempre esta correlacionada con el riesgo climático y demuestra la importancia de considerar las estrategias de adaptación. Las medidas de autocorrelación espacial revelan que el riesgo sistémico es considerablemente mayor en el sur que en el resto de zonas. Los resultados demuestran que el IRESP transmite información pertinente y, que los mapas de vulnerabilidad pueden ser una herramienta útil en el diseño de políticas y toma de decisiones para la gestión del riesgo de sequía. La tercera aplicación evalúa el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. Para lo cual, se desarrolla un modelo estocástico para estimar la prima actuarialmente justa del seguro y se proponen y evalúan pautas alternativas para mejorar el diseño del contrato. Se aborda el riesgo base, el principal problema de los seguros indexados identificado en la literatura y, que está referido a la correlación imperfecta del índice con las pérdidas de la explotación. Para ello, se sigue un enfoque bayesiano que permite evaluar el impacto en el riesgo base de las pautas de diseño propuestas: i) una zonificación por clúster que considera aspectos espacio-temporales, ii) un período de garantía acotado a los ciclos fenológicos del pasto y iii) umbral de garantía. Los resultados muestran que tanto la zonificación como el periodo de garantía reducen el riesgo base considerablemente. Sin embargo, el umbral de garantía tiene un efecto ambiguo sobre el riesgo base. Por otra parte, la zonificación por clúster contribuye a aminorar el riesgo sistémico que enfrentan las aseguradoras. Estos resultados han puesto de manifiesto que un buen diseño de contrato puede tener un doble dividendo, por un lado aumentar su utilidad y, por otro, reducir el coste del seguro. Un diseño de contrato eficiente junto con los avances en la teledetección y un adecuado marco institucional son los pilares básicos para el buen funcionamiento de un programa de seguro. Las nuevas tecnologías ofrecen un importante potencial para la innovación en la gestión del riesgo climático. Los avances en este campo pueden proporcionar importantes beneficios sociales en los países en desarrollo y regiones vulnerables, donde las herramientas para gestionar eficazmente los riesgos sistémicos como la sequía pueden ser de gran ayuda para el desarrollo. The vulnerability of grazing livestock systems highlights the need for tools to assess and mitigate the adverse impact of drought. The recent and rapid progress in remote sensing has awakened an interest for tapping into potential applications, triggering intensive efforts to develop innovations in a number of spheres. One of these areas is climate risk management, where the use of vegetation indices facilitates assessment of drought. This research analyzes drought impacts and evaluates the potential of new technologies such as remote sensing to manage drought risk in extensive livestock systems. Three essays in drought risk management are developed to: (i) assess the economic impact of drought on a livestock farm in the Andalusian Dehesa, (ii) build drought vulnerability maps in Chilean grazing lands, and (iii) design and evaluate the potential of an index insurance policy to address the risk of drought in grazing lands in Coquimbo, Chile. In the first essay, a dynamic and stochastic farm model is designed combining climate, agronomic, socio-economic and ecological aspects to assess drought risk. The model is developed to simulate a representative livestock farm in the Dehesa of Andalusia for the time period 1999-2010. Burn analysis and MonteCarlo simulation methods are used to identify the significance of various risk sources at the farm. Most notably, early summer and early winter are identified as periods of peak risk. Moreover, there is a significant time lag between climate and economic risk and this later last longer than the former. It is shown that intensity, frequency and duration of the drought are three crucial attributes that shape the economic impact of drought. Sensitivity analysis is conducted to assess the sustainability of farm management strategies and demonstrates that lowering the stocking rate reduces farmer exposure to drought risk but entails a reduction in the expected gross margin. The second essay, mapping drought vulnerability in Chilean grazing lands, proposes and builds an index of economic risk (IRESP) that is replicable and simple to interpret. This methodology integrates risk factors and adaptation strategies to deliver information on Value at Risk, maximum expected losses at 5% significance level. Mapping IRESP provides evidence about spatial patterns and significant differences in drought vulnerability across Chilean grazing lands. Spatial autocorrelation measures reveal that systemic risk is considerably larger in the South as compared to Northern or Central Regions. Furthermore, it is shown that vulnerability is not necessarily correlated with climate risk and that adaptation strategies do matter. These results show that IRESP conveys relevant information and that vulnerability maps may be useful tools to assess policy design and decision-making in drought risk management. The third essay develops a stochastic model to estimate the actuarially fair premium and evaluates the potential of an indexed insurance policy to manage drought risk in Coquimbo, a relevant livestock farming region of Chile. Basis risk refers to the imperfect correlation of the index and farmer loses and is identified in the literature as a main limitation of index insurance. A Bayesian approach is proposed to assess the impact on basis risk of alternative guidelines in contract design: i) A cluster zoning that considers space-time aspects, ii) A guarantee period bounded to fit phenological cycles, and iii) the triggering index threshold. Results show that both the proposed zoning and guarantee period considerably reduces basis risk. However, the triggering index threshold has an ambiguous effect on basis risk. On the other hand, cluster zoning contributes to ameliorate systemic risk faced by the insurer. These results highlighted that adequate contract design is important and may result in double dividend. On the one hand, increasing farmers’ utility and, secondly, reducing the cost of insurance. An efficient contract design coupled with advances in remote sensing and an appropriate institutional framework are the basis for an efficient operation of an insurance program. The new technologies offer significant potential for innovation in climate risk managements. Progress in this field is capturing increasing attention and may provide important social gains in developing countries and vulnerable regions where the tools to efficiently manage systemic risks, such as drought, may be a means to foster development.

Adaptive spatio-temporal filter for low-cost camera depth maps

In this paper we present an adaptive spatio-temporal filter that aims to improve low-cost depth camera accuracy and stability over time. The proposed system is composed by three blocks that are used to build a reliable depth map of static scenes. An adaptive joint-bilateral filter is used to obtain consistent depth maps by jointly considering depth and video information and by adapting its parameters to different levels of estimated noise. Kalman filters are used to reduce the temporal random fluctuations of the measurements. Finally an interpolation algorithm is used to obtain consistent depth maps in the regions where the depth information is not available. Results show that this approach allows to considerably improve the depth maps quality by considering spatio-temporal information and by adapting its parameters to different levels of noise.

Efficient spatio-temporal hole filling strategy for Kinect depth maps

In this paper we present an efficient hole filling strategy that improves the quality of the depth maps obtained with the Microsoft Kinect device. The proposed approach is based on a joint-bilateral filtering framework that includes spatial and temporal information. The missing depth values are obtained applying iteratively a joint-bilateral filter to their neighbor pixels. The filter weights are selected considering three different factors: visual data, depth information and a temporal-consistency map. Video and depth data are combined to improve depth map quality in presence of edges and homogeneous regions. Finally, the temporal-consistency map is generated in order to track the reliability of the depth measurements near the hole regions. The obtained depth values are included iteratively in the filtering process of the successive frames and the accuracy of the hole regions depth values increases while new samples are acquired and filtered

Estudios corológicos de plantas vasculares en la cuenca media del Tajo

Se ha realizado un estudio de la distribución de plantas vasculares en un territorio situado entre las provincias de Cuenca, Guadalajara, Madrid y Toledo (España). El territorio estudiado está en la Submeseta Sur de la península ibérica, al sur del Sistema Central, norte de los Montes de Toledo y oeste del Sistema Ibérico, en zonas sedimentarias con poco relieve y clima mediterráneo, con grandes contrastes de temperatura y precipitaciones muy irregulares. Coincide con las regiones naturales llamadas: “Alcarrias”, “Campiñas de Madrid y Guadalajara” y “Vegas de los ríos de la Cuenca del Tajo”. Es lo que he llamado Cuenca Media del Tajo. En una primera fase se ha estudiado la flora regional para adquirir conocimientos previos mediante las consultas bibliográficas y de herbarios, se ha contado con bases de datos disponibles para MA, MACB, MAF, JACA, AH, ABH, VAL, SALA y EMMA. Se han revisado las aportaciones propias que en los últimos años he realizado en el territorio en relación a los temas tratados en la tesis. El trabajo de campo ha consistido en la realización de inventarios de presencia de flora. Ha sido muy importante la tarea herborizadora para llegar a la correcta identificación de las especies colectadas en los inventarios. De esta forma el autor ha confeccionado un herbario propio JML que en el territorio muestreado ha reunido cerca de 15000 números en las cuatro provincias estudiadas. Se ha hecho un muestreo sistemático del territorio con unos 6000 listados de plantas. Se ha tomado como unidad de muestreo la cuadrícula de UTM de 1 km de lado incluida como una centésima parte de la cuadrícula de UTM de 10 km. Se han seguido criterios para uniformizar el muestreo. Se ha apuntado el tiempo empleado y la superficie muestreada estimada en cada toma de datos. El criterio mínimo que tienen que cumplir todas las cuadrículas en el área estudiada ha sido que para cada cuadrícula de UTM de 5 km se han realizado al menos 5 inventarios en 5 cuadrículas diferentes de UTM de 1 km y al menos en una hora de tiempo. La unidad de comparación ha sido la cuadrícula UTM de 5 km. Se han informatizado los inventarios de campo, para ello se ha creado la base de datos TESIS en Microsoft office –Access-. Las principales tablas son LOCALIDAD, en la que se anotan las características del lugar muestreado y ESPECIES, que lista las especies de flora consideradas en las cuatro provincias del estudio. Por medio de formularios se han rellenado las tablas; destaca la tabla ESPECIE INVENTARIO que relaciona las tablas ESPECIES y LOCALIDAD; esta tabla cuenta en este momento con unos 165.000 registros. En la tabla ESPECIES_FPVI se visualizan las especies recopiladas. Se ha creado un indicador llamado FPVI “Flora permanentemente visible identificable” que consiste en atribuir a cada especie unos índices que nos permiten saber si una determinada planta se puede detectar en cualquier época del año. Los resultados presentados son: Creación de la base de datos TESIS. El Catálogo Florístico de la Cuenca Media del Tajo, que es el catálogo de la flora de las cuatro provincias desde el principio de la sistemática hasta las Saxifragáceas. En total se han recopilado 1028 taxones distribuidos en 77 familias. Se ha calculado el índice FPVI, para las especies del catálogo. La finalidad para la que se ha diseñado este índice es para poder comparar territorios. Para el desarrollo de ambos resultados ha sido fundamental el desarrollo de la tabla ESPECIES_PVI de la base de datos TESIS. En la tabla ESPECIES_PVI se han apuntado las características ecológicas y se revisa la información bibliográfica disponible para cada especie; las principales fuentes de información consultadas han sido Flora iberica, el proyecto “Anthos” y las bases de datos de los herbarios. Se ha apuntado sí se ha visto, sí está protegida o sí en un endemismo. Otros resultados son: la localización de las cuadrículas de UTM de 10 km, con mayor número de endemismos o especies singulares, con mayor valor botánico. Se ha realizado un par de ejemplos de estudios de autoecología de especie, en concreto Teucrium pumilum y Clematis recta. Se han confeccionando salidas cartográficas de distribución de especies. Se ha elaborado el herbario JML. Se ha presentado una sencilla herramienta para incluir inventarios florísticos, citas corológicas, consultas de autoecología o etiquetado de pliegos de herbario. Como colofón, se ha colaborado para desarrollar una aplicación informática de visualización, análisis y estudio de la distribución de taxones vegetales, que ha utilizado como datos de partida un porcentaje importante de los obtenidos para esta tesis. ABSTRACT I have made a study of the distribution of vascular plants in a territory located between the provinces of Cuenca, Guadalajara, Madrid and Toledo (Spain). The studied area is in the “Submeseta” South of the Iberian Peninsula, south of the Central System, north of the Montes de Toledo and west of the Iberian System, in sedimentary areas with little relief and Mediterranean climate, with big temperature contrasts and irregular rainfall. Coincides with the natural regions called "Alcarrias", "countryside of Madrid and Guadalajara" and “Vegas River Tagus Basin”. This is what I have called Middle Tagus Basin. In a first step we have studied the regional flora to acquire prior knowledge through the literature and herbaria consultations, it has had available databases for MA, MACB, MAF, JACA, AH, ABH, VAL, SALA and EMMA herbaria. The contributions I have made in the last years in the territory in relation to the topics discussed in the thesis have been revised. The field work consisted of conducting inventories presence of flora. Botanize was a very important task to get to the correct identification of the species collected in inventories. In this way the author has made his own herbarium JML in the sampled area has met at least 15000 samples in the four studied provinces. There has been a systematic sampling of the territory with nearly 6,000 listings of plants. Was taken as the sampling unit grid UTM 1 km side included as a hundredth of the UTM grid of 10 km from side. Criteria have been taken to standardize the sampling. Data were taken of the time spent and the estimated sampled surface. The minimum criteria they have to meet all the grids in the study area has been that for each UTM grid of 5 km have been made at least 5 stocks in 5 different grids UTM 1 km and at least one hour of time. The unit of comparison was the UTM grid of 5 km. I have computerized inventories of field, for it was created a database in Access- Microsoft office -TESIS. The main tables are LOCALIDAD, with caracteristics of the sampled location and ESPECIES, which lists the plant species considered in the four provinces of the study, is. Through forms I filled in the tables; highlights ESPECIE INVENTARIO table that relates the tables ESPECIES and LOCALIDAD, this table is counted at the moment with about 165,000 records. The table ESPECIES FPVI visualizes all recollected species. We have created an indicator called FPVI "Flora permanently visible identifiable" that attributes to each species indices that allow us to know whether a given plant can be detected in any season. The results presented are: Creating data base TESIS. The Floristic Books Middle Tagus Basin, which is a catalog of the flora of the four provinces since the beginning of the systematic until Saxifragaceae. In total 1028 collected taxa in 77 families. We calculated FPVI index for species catalog. The purpose for which this index designed is, to compare territories. For the development of both results, it was essential to develop the table ESPECIES_PVI TESIS data base. Table ESPECIES_PVI has signed the ecological characteristics and bibliographic information available for each species is revised; the main sources of information has been Flora iberica, the Anthos project databases of herbaria. Targeted species has been recorded, when seen, protected or endemism. Have also been located UTM grids of 10 km, with the largest number of endemic or unique species and more botanical value. There have been a couple of species autecology studies, namely Teucrium pumilum and Clematis recta, as an example of this type of study. They have been putting together maps of species distribution. We made herbarium JML. I have presented a simple tool to include floristic inventories, chorological appointments, consultations or to tag autoecology herbarium specimens. To cap it has worked to develop a computer application for visualization, analysis and study of the distribution of plant taxa, which has used as input data a significant percentage of those obtained for this thesis.