986 resultados para Dissipation of pesticides
Resumo:
Sodium cyanide is being used on reefs in the Asia-Pacific region to capture live fish for the aquarium industry, and to supply a rapidly growing, restaurant-based demand, The effects of cyanide on reef biota have not been fully explored. To investigate its effect on hard corals, we exposed small branch lips of Stylophora pistillata and Acropora aspera to cyanide concentrations estimated to occur during cyanide fishing. Pulse amplitude modulation (PAM) chlorophyll fluorescence techniques were used to examine photoinhibition and photosynthetic electron transport in the symbiotic algae (zooxanthellae) in the tissues of the corals, These measurements were made in situ and in real time using a recently developed submersible PAM fluorometer. In S. pistillata. exposure to cyanide resulted in an almost complete cessation in photosynthetic electron transport rate. Both species displayed marked decreases in the ratio of variable fluorescence (F-v) to maximal fluorescence (F-m) (dark-adapted F-v/F-m), following exposure to cyanide, signifying a decrease in photochemical efficiency. Dark-adapted F-v/F-m recovered to normal levels in similar to 6 d, although intense tissue discolouration, a phenomenon well-recognised as coral 'bleaching' was observed during this period, Bleaching was caused by loss of zooxanthellae from the coral tissues, a well-recognised sub-lethal stress response of corals. Using the technique of chlorophyll fluorescence quenching analysis, corals exposed to cyanide did not show light activation of Calvin cycle enzymes and developed high levels of non-photochemical quenching (q(N)), signifying the photoprotective dissipation of excess light as heat, These features are symptomatic of the known properties of cyanide as an inhibitor of enzymes of the Calvin cycle. The results of this in situ study show that an impairment of zooxanthellar photosynthesis is; the site of cyanide-mediated toxicity, and is the cue that causes corals to release their symbiotic zooxanthellac following cyanide exposure. This study demonstrates the efficacy of PBM fluorometry as a new tool for in situ stress assessment in zooxanthellate scleractinian corals. (C) 1999 Elsevier Science Ltd. All rights reserved.
Resumo:
The effect of the solid and dissolved organic matter fractions, mineral composition and ionic strength of the soil solution on the sorption behaviour of pesticides were studied. A number of soils, chosen so as to have different clay mineral and organic carbon content, were used to study the sorption of the pesticides atrazine (6-chloro-N-2-ethyl-N-4-isopropyl-1,3,5-triazine-2,4-diamine), 2,4-D ((2,4-dichlorophenoxy) acetic acid), isoproturon (3-(4-isopropylphenyl)1,1-dimethylurea) and paraquat (1,1'-dimethyl-4,4'-bipyridinium) in the presence of low and high levels of dissolved organic carbon and different background electrolytes. The sorption behaviour of atrazine, isoproturon and paraquat was dominated by the solid state soil components and the presence of dissolved organic matter had little effect. The sorption of 2,4-D was slightly affected by the soluble organic matter in the soil. However, this effect may be due to competition for adsorption sites between the pesticide and the soluble organic matter rather than due to a positive interaction between the pesticide and the soluble fraction of soil organic matter. It is concluded that the major factor governing the sorption of these pesticides is the solid state organic fraction with the clay mineral content also making a significant contribution. The dissolved organic carbon fraction of the total organic carbon in the soil and the ionic strength of the soil solution appear to have little or no effect on the sorption/transport characteristics of these pesticides over the range of concentrations studied. (C) 2002 Elsevier Science B.V. All rights reserved.
Resumo:
Most finite element packages use the Newmark algorithm for time integration of structural dynamics. Various algorithms have been proposed to better optimize the high frequency dissipation of this algorithm. Hulbert and Chung proposed both implicit and explicit forms of the generalized alpha method. The algorithms optimize high frequency dissipation effectively, and despite recent work on algorithms that possess momentum conserving/energy dissipative properties in a non-linear context, the generalized alpha method remains an efficient way to solve many problems, especially with adaptive timestep control. However, the implicit and explicit algorithms use incompatible parameter sets and cannot be used together in a spatial partition, whereas this can be done for the Newmark algorithm, as Hughes and Liu demonstrated, and for the HHT-alpha algorithm developed from it. The present paper shows that the explicit generalized alpha method can be rewritten so that it becomes compatible with the implicit form. All four algorithmic parameters can be matched between the explicit and implicit forms. An element interface between implicit and explicit partitions can then be used, analogous to that devised by Hughes and Liu to extend the Newmark method. The stability of the explicit/implicit algorithm is examined in a linear context and found to exceed that of the explicit partition. The element partition is significantly less dissipative of intermediate frequencies than one using the HHT-alpha method. The explicit algorithm can also be rewritten so that the discrete equation of motion evaluates forces from displacements and velocities found at the predicted mid-point of a cycle. Copyright (C) 2003 John Wiley Sons, Ltd.
Resumo:
The polyphase evolution of the Serido Belt (NE-Brazil) includes D, crust formation at 2.3-2.1 Ga, D-2 thrust tectonics at 1.9 Ga and crustal reworking by D-3 strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D-2 and D-3 events were used to constrain the tectono-thermal evolution of the belt. D-2 shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600-650 degreesC) through grain boundary migration, subgrain rotation and operation of quartz Q-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from (c)-prism to positive and negative (a)-rhombs. During D-3, enhancement of ductility by dissipation of heat that came from syn-D-3 granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D-3 shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from (a)-prism to a basal slip indicates a thermal path from 600 to 350 degreesC. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Serido Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths. (C) 2003 Elsevier Ltd. All rights reserved.
Resumo:
OBJECTIVE: Despite the intensive use of pesticides in agriculture there are few studies assessing the risk of respiratory conditions from this exposure. The study aimed at quantifying the prevalence of respiratory symptoms among farmers and evaluating its relationship with occupational use of pesticides and the prevalence of respiratory symptoms. METHODS: A cross-sectional study was conducted among 1,379 farmers from two municipalities of Southern Brazil in 1996. Frequency and type of chemical exposure and pesticide poisoning were recorded for both sexes. All subjects aged 15 years or older with at least 15 weekly hours of agricultural activity were interviewed. An adapted questionnaire developed by the American Thoracic Society was used for the assessment of respiratory symptoms. Multivariate logistic regression analysis was carried out. RESULTS: More than half (55%) of interviewees were male. The prevalence of asthma symptoms was 12% and chronic respiratory disease symptoms was 22%. Higher odds ratios for both asthma (OR=1.51; 95% CI: 1.07-2.14) and chronic respiratory disease (OR=1.34; 95% CI 1.00-1.81) symptoms were found in women. Logistic regression analysis identified associations between many forms of exposure to pesticides and increased respiratory symptoms. Occurrence of pesticide poisoning was associated with higher prevalence of asthma symptoms (OR=1.54; 95% CI: 1.04-2.58) and chronic respiratory disease symptoms (OR=1.57; 95% CI: 1.08-2.28). CONCLUSIONS: In spite of causality limitations, the study results provide evidence that farming exposure to pesticides is associated with higher prevalence of respiratory symptoms, especially when the exposure is above two days per month.
Resumo:
The state of the art of voltammetric and amperometric methods used in the study and determination of pesticides in crops, food, phytopharmaceutical products, and environmental samples is reviewed. The main structural groups of pesticides, i.e., triazines, organophosphates, organochlorides, nitrocompounds, carbamates, thiocarbamates, sulfonylureas, and bipyridinium compounds are considered with some degradation products. The advantages, drawbacks, and trends in the development of voltammetric and amperometric methods for study and determination of pesticides in these samples are discussed.
Resumo:
QuEChERS original method was modified into a new version for pesticides determination in soils. The QuEChERS method is based on liquid–liquid portioning with ACN and was followed by cleanup step using dispersive SPE and disposable pipette tips. Gas chromatographic separation with MS detection was carried out for pesticides quantification. The method was validated using recovery experiments for 36 multiclass pesticides. Mean recoveries of pesticides at each of the four spiking levels between 10–300 µg/kg of soil ranged from 70–120% for 26 pesticides with RSD values less than 15%. The method achieved low limit of detection less than 7.6 µ g/kg. Matrix effects were observed for 13 pesticides. Matrix effects were compensated by using matrix-matched calibration. The method was applied successfully using d-SPE or DPX in the analysis of the pesticides in soils from organic farming and integrated pest management.
Resumo:
New strategies to reduce the environmental and economic costs of pesticides use are currently under study. Microencapsulation has been used as a versatile tool for the production of controlled release agricultural formulations. In this study, the photochemical degradation of the herbicides MCPA and mecoprop has been investigated in different aqueous media such as ultrapure and river water under simulated solar irradiation. To explore the possibility of introducing cyclodextrins in the herbicide formulations, the photodegradation study of the inclusion complexes of MCPA and mecoprop with (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) was also performed. The half-lives of MCPA and mecoprop inclusion complexes were increased approximately by a factor of three related to the free molecules. Additionally, it has been shown that the photodegradation of MCPA and mecoprop is influenced by their structural features. The additional methyl group existing in mecoprop molecular structure has a positive influence on the stabilization of the radical intermediate formed in the first stage of photodegradation of both herbicides. The results found indicated that MCPA and mecoprop form inclusion complexes with HP-β-CD showing higher photostability compared to free herbicides indicating that HP-β-CD may serve as ingredient in these herbicide formulations.
Resumo:
When a pesticide is released into the environment, most of it is lost before it reaches its target. An effective way to reduce environmental losses of pesticides is by using controlled release technology. Microencapsulation becomes a promising technique for the production of controlled release agricultural formulations. In this work, the microencapsulation of chlorophenoxy herbicide MCPA with native b-cyclodextrin and its methyl and hydroxypropyl derivatives was investigated. The phase solubility study showed that both native and b-CD derivatives increased the water solubility of the herbicide and inclusion complexes are formed in a stoichiometric ratio of 1:1. The stability constants describing the extent of formation of the complexes have been determined by phase solubility studies. 1H NMR experiments were also accomplished for the prepared solid systems and the data gathered confirm the formation of the inclusion complexes. 1H NMR data obtained for the MCPA/CDs complexes disclosed noticeable proton shift displacements for OCH2 group and H6 aromatic proton of MCPA provided clear evidence of inclusion complexation process, suggesting that the phenyl moiety of the herbicide was included in the hydrophobic cavity of CDs. Free energy molecular mechanics calculations confirm all these findings. The gathered results can be regarded as an essential step to the development of controlled release agricultural formulations containing herbicide MCPA.
Resumo:
Some of the properties sought in seismic design of buildings are also considered fundamental to guarantee structural robustness. Moreover, some key concepts are common to both seismic and robustness design. In fact, both analyses consider events with a very small probability of occurrence, and consequently, a significant level of damage is admissible. As very rare events,in both cases, the actions are extremely hard to quantify. The acceptance of limited damage requires a system based analysis of structures, rather than an element by element methodology, as employed for other load cases. As for robustness analysis, in seismic design the main objective is to guarantee that the structure survives an earthquake, without extensive damage. In the case of seismic design, this is achieved by guaranteeing the dissipation of energy through plastic hinges distributed in the structure. For this to be possible, some key properties must be assured, in particular ductility and redundancy. The same properties could be fundamental in robustness design, as a structure can only sustain significant damage if capable of distributing stresses to parts of the structure unaffected by the triggering event. Timber is often used for primary load‐bearing elements in single storey long‐span structures for public buildings and arenas, where severe consequences can be expected if one or more of the primary load bearing elements fail. The structural system used for these structures consists of main frames, secondary elements and bracing elements. The main frame, composed by columns and beams, can be seen as key elements in the system and should be designed with high safety against failure and under strict quality control. The main frames may sometimes be designed with moment resisting joints between columns and beams. Scenarios, where one or more of these key elements, fail should be considered at least for high consequence buildings. Two alternative strategies may be applied: isolation of collapsing sections and, provision of alternate load paths [1]. The first one is relatively straightforward to provide by deliberately designing the secondary structural system less strong and stiff. Alternatively, the secondary structural system and the bracing system can be design so that loss of capacity in the main frame does not lead to the collapse. A case study has been selected aiming to assess the consequences of these two different strategies, in particular, under seismic loads.
Resumo:
The excessive use of pesticides and fertilisers in agriculture has generated a decrease in groundwater and surface water quality in many regions of the EU, constituting a hazard for human health and the environment. Besides, on-site sewage disposal is an important source of groundwater contamination in urban and peri-urban areas. The assessment of groundwater vulnerability to contamination is an important tool to fulfil the demands of EU Directives. The purpose of this study is to assess the groundwater vulnerability to contamination related mainly to agricultural activities in a peri-urban area (Vila do Conde, NW Portugal). The hydrogeological framework is characterised mainly by fissured granitic basement and sedimentary cover. Water samples were collected and analysed for temperature, pH, electrical conductivity, chloride, phosphate, nitrate and nitrite. An evaluation of groundwater vulnerability to contamination was applied (GOD-S, Pesticide DRASTIC-Fm, SINTACS and SI) and the potential nitrate contamination risk was assessed, both on a hydrogeological GIS-based mapping. A principal component analysis was performed to characterised patterns of relationship among groundwater contamination, vulnerability, and the hydrogeological setting assessed. Levels of nitrate above legislation limits were detected in 75 % of the samples analysed. Alluvia units showed the highest nitrate concentrations and also the highest vulnerability and risk. Nitrate contamination is a serious problem affecting groundwater, particularly shallow aquifers, especially due to agriculture activities, livestock and cesspools. GIS-based cartography provided an accurate way to improve knowledge on water circulation models and global functioning of local aquifer systems. Finally, this study highlights the adequacy of an integrated approach, combining hydrogeochemical data, vulnerability assessments and multivariate analysis, to understand groundwater processes in peri-urban areas.
Resumo:
The use of chemicals and chemical derivatives in agriculture and industry has contributed to their accumulation and persistence in the environment. Persistent organic pollutants (POPs) are among the environmental pollutants of most concern since, when improperly handled and disposed, they can persist in the environment, bioaccumulate through the food web, and may create serious public health and environmental problems. Development of an effective degradation process has become an area of intense research. The physical/chemical methods employed, such as volatilization, evaporation, photooxidation, adsorption, or hydrolysis, are not always effective, are very expensive, and, sometimes, lead to generation/disposal of other contaminants. Biodegradation is one of the major mechanisms by which organic contaminants are transformed, immobilized, or mineralized in the environment. A clear understanding of the major processes that affect the interactions between organic contaminants, microorganisms, and environmental matrix is, thus, important for determining persistence of the compounds, for predicting in situ transformation rates, and for developing site remediation. Information on their risks and impact and occurrence in the different environmental matrices is also important, in order to attenuate their impact and apply the appropriate remediation process. This chapter provides information on the fate of pesticides and polycyclic aromatic hydrocarbons (PAHs), their impact, bioavailability, and biodegradation. © Springer Science+Business Media Dordrecht 2014.
Resumo:
En Argentina el cultivo de soja ocupa el primer lugar en superficie sembrada. El 90% de la producción se obtiene en la zona central del pais. La siembra directa favorece la multiplicación y supervivencia de fitopatógenos causantes de tizón y pústula bacterianos. El tizón es producido por Pseudomonas syringae pv. glycinea observándose manchas marrones en las hojas. Produce gran variedad de toxinas: coronatina, faseolotoxina, siringomicina, tabtoxina, proteínas “nucleation ice”, entre otras, las cuales contribuyen a la clorosis y necrosis. En la infección, además, están involucrados exopolisacáridos (levano y alginato). La celulosa ha sido relacionada en la adhesión bacteriana y en la formación de biofilm. La pústula es causada por Xanthomonas axonopodis pv. glycines. Produce manchas pequeñas con una pequeña pústula de color claro. Libera enzimas como α-amilasa, proteasa, endo β-mannanasa, actividad peptolítica, que degradan componentes vegetales. Xantan, producido por X. axonopodis es uno de los componentes necesarios para la formación de biofilm. Este último es considerado un importante factor de virulencia porque proporciona una estrategia de colonización que otorga mayor resistencia a ambientes desfavorables, tolerancia a antimicrobianos, producción de metabolitos y exoenzimas, etc. Actualmente el control de bacterias fitopatógenas se realiza mediante pesticidas con alta toxicidad para los consumidores y el ambiente. Para evitar las bacteriosis en la práctica se sugiere la rotación de cultivos y utilizar semillas certificadas. Se están probando compuestos naturales derivados de plantas medicinales como pesticidas; estos se pueden dividir en varias categorías fitoquímicas. Varios estudios confirman la actividad antibacteriana, antifúngica y antiviral de estos productos. Extractos vegetales con alto contenido de flavonoides y aceite esenciales poseen una importante actividad antibacteriana. Además, algunos aceites esenciales podrían estar incidiendo en la liberación y/o producción de biofilm, exopolisacáridos y exoproteínas. La gran incidencia de las infecciones por fitopatógenos y las pérdidas económicas que estas acarrean hacen que su control presente grandes dificultades para la agricultura sustentable en soja de nuestro país. En este trabajo se propone estudiar los diferentes factores de virulencia de cepas bacterianas fitopatógenas y evaluar el rol que cumplen en el proceso de la enfermedad en cultivos de soja y desarrollar estrategias para el control de bacteriosis vegetales aplicando productos naturales aislados de plantas aromáticas. La correcta utilización de productos antimicrobianos de origen natural aplicados sobre el cultivo y/o sobre las semillas evitaría la dispersión de la enfermedad y la eliminación al medio ambiente de productos contaminantes no deseados. In Argentina, soybean cultivation occupies the first place; 90% of this cereal is produced in the central region of the country. Intensive tillage practices favour multiplication and survival of bacterial phytopathogens causing blight and pustule diseases. Pseudomonas syringae pv. glycinea produce several toxins like coronatine, faseolotoxine, siringomicine, tabtoxine and proteins of nucleation ice that contribute to the develop of chlorosis and necrosis, characteristic of bacterial blight. It also produces levan and alginate, cellulose and biofilm. Pustule disease is caused by Xanthomonas axonopodis pv glycines, which produce enzymes like α-amilase, protease, endo β-mannanase, peptolitic activity, xanthan and biofilm. Nowadays the control of phytopathogenic bacteria consists in the application of pesticides that are toxic for the environment and man. Natural products from medicinal plants are a new alternative for the treatment of phytopathogens. Researches made with phytochemical compounds (flavonoids, phenols, quinones, cummarines, essential oils, terpenes) support the antimicrobial activity of these natural products. What is more, these substances could suppress the biofilm, exoproteins and exopolisaccharides formation and release of them. The infections caused by phytopathogens provoke economical loses and its control presents big difficulties in our country. The proposal of this work is the characterization of phytopatoghenic strains, its virulence factors and the role they play in the disease process. The development of a new alternative for the control of vegetable bacteriosis using natural products obtained from aromatic plants and the correct application of them on sown fields or on seeds is also an objective in this work.
Resumo:
The decline in extent of wild pollinators in recent years has been partly associated with changing farm practices and in particular with increase of pesticide use. In this paper we combine ecological modelling with economic analysis of a single farm output under the assumption that both pollination and pest control are essential inputs. We show that the drive to increase farm output can lead to a local decline in the wild bee population. Commercial bees are often considered an alternative to wild pollinators, but we show that their introduction can lead to further decline and finally local extinction of wild bees. The transitions between different outcomes are characterised by threshold behaviour and are potentially difficult to predict and detect in advance. Small changes in economic (input prices) and ecological (wild bees carrying capacity and effect of pesticides on bees) can move the economic-ecological system beyond the extinction threshold. We also show that increasing the pesticide price or decreasing the commercial bee price might lead to reestablishment of wild bees following their local extinction. Thus, we demonstrate the importance of combining ecological modelling with economics to study the provision of ecosystem services and to inform sustainable management of ecosystem service providers.