Comment on "correlated noise in a logistic growth model"

We argue the results published by Bao-Quan Ai et al [Phys. Rev E 67, 022903 (2003)] on "correlated noise in a logistic growth model " are not correct. Their conclusion that for larger values of the correlation parameter, lambda, the cell population is peaked at x=0, which denotes the high extinction rate is also incorrect. We find the reverse behaviour corresponding to their results, that increasing lambda, promotes the stable growth of tumour cells. In particular, their results for steady-state probability, as a function of cell number, at different correlation strengths, presented in figures 1 and 2 show different behaviour than one would expect from the simple mathematical expression for the steady-state probability. Additionally, their interpretation at small values of cell number that the steady state probability increases as they increase the correlation parameter is also questionable. Another striking feature in their figures (1 and 3) is that for the same values of the parameter lambda and alpha, their simulation produces two different curves both qualitatively and quantitatively.

A conformal invariant growth model

We present a one-parameter extension of the raise and peel one-dimensional growth model. The model is defined in the configuration space of Dyck (RSOS) paths. Tiles from a rarefied gas hit the interface and change its shape. The adsorption rates are local but the desorption rates are non-local; they depend not only on the cluster hit by the tile but also on the total number of peaks (local maxima) belonging to all the clusters of the configuration. The domain of the parameter is determined by the condition that the rates are non-negative. In the finite-size scaling limit, the model is conformal invariant in the whole open domain. The parameter appears in the sound velocity only. At the boundary of the domain, the stationary state is an adsorbing state and conformal invariance is lost. The model allows us to check the universality of non-local observables in the raise and peel model. An example is given.

Public versus private provision of infrastructure in a neoclassical growth model

This article studies the welfare and long run allocation impacts of privatization. There are two types of capital in this model economy, one private and the other initially public (“infrastructure”). A positive externality due to infrastructure capital is assumed, so that the government could improve upon decentralized allocations internalizing the externality, but public investmentis …nanced through distortionary taxation. It is shown that privatization is welfare-improving for a large set of economies and that after privatization under-investment is optimal. When operation inefficiency in the public sectoror subsidy to infrastructure accumulation are introduced, gains from privatization are higherand positive for most reasonable combinations of parameters.

A competitive growth model with endogenous fertility

This paper investigates the interaction between endogenous fertility behavior and the distribution of income and wealth arnong farnilies in a competitive market economy. We construct a growth model in which altruistic dynasties are heterogeneous in their initial stocks of physical capital. Dynasties make choices of farnily size along with decisions about consumption and intergenerational transfers. We show that if the rate of time preference is increasing in the number of children and preferences over nurnber of children satisfy a norrnality assumption, all steady states are characterized by equality of capital stocks and consumption arnong families. We also provide sufficient conditions for uniqueness of the steady state. In order to illustrate these results, we present an example in which preferences over number of children are logarithrnic and the technology is Cobb-Douglas. For this combination of preferences and technology, there exists a unique egalitarian steady state. Moreover, the economy converges to this steady state in only one generation .

Debt and default in a growth model

This paper presents a small open economy model with capital accumulation and without commitment to repay debt. The optimal debt contract specifies debt relief following bad shocks and debt increase following good shocks and brings first order benefits if the country's borrowing constraint is binding. Countries with less capital (with higher marginal productivity of capital) have a higher debt-GDP ratio, are more likely to default on uncontingent bonds, require higher debt relief after bad shocks and pay a higher spread over treasury. Debt relief prescribed by the optimal contract following the interest rate hikes of 1980-81 is more than half of the debt forgiveness obtained by the main Latin American countries through the Brady agreements.

Richards growth model and viability indicators for populations subject to interventions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatigue crack growth of Al 7475 T761 under constant and variable amplitude loading

Experimental programs in constant and variable amplitude loading were performed to obtain a x N curves and to study retardation in fatigue crack growth due to overloads. The main aim of this research program was to analyse the effect of overload ratio and number of overload peaks. The effect of underloads, before and after the overload blocks was also studied. The generalised equation of Paris-Erdogan type was used for modelling of obtained data on crack propagation under constant amplitude load.

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

Objectives. Evaluate the flexural strength (sigma) and subcritical crack growth (SCG) under cyclic loading of glass-infiltrated alumina-based (IA, In-Ceram Alumina) and zirconia-reinforced (IZ, In-Ceram Zirconia) ceramics, testing the hypothesis that wet environment influences the SCG of both ceramics when submitted to cyclic loading.Methods. Bar-shaped specimens of IA (n = 45) and IZ ( n = 45) were fabricated and loaded in three-point bending (3P) in 37 degrees C artificial saliva (IA(3P) and IZ(3P)) and cyclic fatigued (F) in dry (D) and wet (W) conditions (IA(FD), IA(FW), IZ(FD), IZ(FW)). The initial sigma and the number of cycles to fracture were obtained from 3P and F tests, respectively. Data was examined using Weibull statistics. The SCG behavior was described in terms of crack velocity as a function of maximum stress intensity factor (K(Imax)).Results. The Weibull moduli (m = 8) were similar for both ceramics. The characteristic strength (sigma(0)) of IA and IZ was and 466 MPa 550 MPa, respectively. The wet environment significantly increased the SCG of IZ, whereas a less evident effect was observed for IA. In general, both ceramics were prone to SCG, with crack propagation occurring at K(I) as low as 43-48% of their critical K(I). The highest sigma of IZ should lead to longer lifetimes for similar loading conditions.Significance. Water combined with cyclic loading causes pronounced SCG in IZ and IA materials. The lifetime of dental restorations based on these ceramics is expected to increase by reducing their direct exposure to wet conditions and/or by using high content zirconia ceramics with higher strength. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Microstructural effects on fatigue crack growth behavior of a microalloyed steel

Thermal transformations on microalloyed steels can produce multiphase microstructures with different amounts of ferrite, martensite, bainite and retained austenite. These different phases, with distinct morphologies, are determinant of the mechanical behavior of the steel and can, for instance, affect the crack path or promote crack shielding, thus resulting in changes on its propagation rate under cyclic loading. The aim of the present work is to evaluate the effects of microstructure on the tensile strength and fatigue crack growth (FCG) behaviour of a 0.08%C-1,5%Mn (wt. pct.) microalloyed steel, recently developed by a Brazilian steel maker under the designation of RD480. This steel is being considered as a promising alternative to replace low carbon steel in wheel components for the automotive industry. Various microstructural conditions were obtained by means of heat treatments followed by water quench, in which the material samples were kept at the temperatures of 800, 950 and 1200 °C. In order to describe the FCG behavior, two models were tested: the conventional Paris equation and a new exponential equation developed for materials showing non-linear FCG behavior. The results allowed correlating the tensile properties and crack growth resistance to the microstructural features. It is also shown that the Region II FCG curves of the dual and multiphase microstructural conditions present crack growth transitions that are better modeled by dividing them in two parts. The fracture surfaces of the fatigued samples were observed via scanning electron microscopy in order to reveal the fracture mechanisms presented by the various material conditions. © 2010 Published by Elsevier Ltd.

A low-growth model: informality as a structural constraint

Includes bibliography

Fatigue crack growth rate in mode I of a carbon fiber 5HS weave composite laminate processed via RTM

Delamination or crack propagation between plies is a critical issue for structural composites. In viewing this issue and the large application of woven fabrics in structural applications, especially the ones that requires high drapeability to be preformed in a RTM mold cavity such as the asymmetric ones, e.g HS series, this research aimed in dynamically testing the carbon fiber 5HS/RTM6 epoxy composites under opening mode using DCB set up in order to investigate the crack growth rate behavior in an irregular surface produced by the fabric waviness. The evaluation of the energy involved in each crack increment was based on the Irwin-Kies equation using compliance beam theory. The tests were conducted at constant stress ratio of R=0.1 with displacement control, frequency of 10 Hz, in accordance to ASTM E647-00 for measurement of crack growth rate. The results showed large scatter when compared to unidirectional carbon fiber composites due to damage accumulation at the fill tows.