Carbon nanotubes and glucose oxidase bionanocomposite bridged by ionic liquid-like unit: Preparation and electrochemical properties

For their biocompatibility and potential bionanoelectronic applications, integration of carbon nanotubes (CNTs) with biomolecules such as redox enzyme is highly anticipated. Therein, CNTs are expected to act not only as an electron transfer promoter, but also as immobilizing substrate for biomolecules. In this report, a novel method for immobilization of biomolecules on CNTs was proposed based on ionic interaction, which is of universality and widespread use in biological system. As illustrated, glucose oxidase (GOD) and single-walled carbon nanotubes (SWNTs) were integrated into a unitary bionanocomposite by means of ionic liquid-like unit on functionalized SWNTs. The resulted bionanocomposite illustrated better redox response of immobilized GOD in comparison of that prepared by weak physical absorption without ionic interaction. As a potential application of concept, the electrochemical detection of glucose was exemplified based on this novel bionanocomposite.

Electrochemical biosensors based on advanced bioimmobilization matrices

Biosensors have experienced rapid, extensive development. To maintain the bioactivity of biomolecules and to give the electrochemical output signal required, appropriate bioimmobilization matrices for biomolecules are critical.In this review, we describe some advanced membrane materials (including hydrogels, sol-gel-derived organic-inorganic composites and lipid membranes), introduce electrochemical biosensors based on bioimmobilization materials and describe their performance.Biosensors operating in extreme conditions and displaying direct electron transfer with electrodes based on these advanced membrane materials are attractive. Recent developments in nanomaterials include biosensors, so we emphasize the intersection of nanomaterials with advanced membrane materials in biosensors.

Electrochemical characteristics of facile prepared carbon nanotubes-ionic liquid gel modified microelectrode and application in bioelectrochemistry

The carbon nanotubes (CNTs) based microelectrode (ME) by modifying CNTs-room temperature ionic liquid (IL) gel at carbon fiber microelectrode (CFME) is easily prepared, which exhibits the typical cyclic voltammogram of ME with sigmoid shape and possesses good stability, high conductivity and enlarged current response and tunable dimension. The direct electron transfer of glucose oxidase has been greatly promoted showing reversible electrochemical behavior even at high scan rate. In addition, the CNTs based ME also exhibits effectively electrocatalytic oxidized ability to biomolecules, e.g. dopamine (DA), ascorbic acid (AA) and dihydronicotinamide adenine dinucleotide. The obvious separation of oxidized peak potential for DA and AA makes it possible to selectively determine DA in presence of AA. These phenomena show that the CNTs based ME has promising potential to detect various species in vivo and in vitro.

Self-assembling gold nanoparticles on thiol-functionalized poly(styrene-co-acrylic acid) nanospheres for fabrication of a mediatorless biosensor

A novel strategy to construct a sensitive mediatorless sensor of H2O2 was described. At first, a cleaned gold electrode was immersed in thiol-functionalized poly(styrene-co-acrylic acid) (St-co-AA) nanosphere latex prepared by emulsifier-free emulsion polymerization St with AA and function with dithioglycol to assemble the nanospheres, then gold nanoparticles were chemisorbed onto the thiol groups and formed monolayers on the surface of poly(St-co-AA) nanospheres. Finally, horseradish peroxidase (HRP) was immobilized on the surface of the gold nanoparticles. The sensor displayed an excellent electrocatalytical response to reduction of H2O2 without the aid of an electron mediator. The biosensor showed a linear range of 8.0 mu mol L-1-7.0 mmol L-1 with a detection limit of 4.0 mu mol L-1. The biosensor retained more than 97.8% of its original activity after 60 days' storage. Moreover, the studied biosensor exhibited good current reproducibility and good fabrication reproducibility.

Lipid membrane immobilized horseradish peroxidase biosensor for amperometric determination of hydrogen peroxide

Stable films of didodecyldimethylammonium bromide (DDAB, a synthetic lipid) and horseradish peroxidase (HRP) were made by casting the mixture of the aqueous vesicle of DDAB and HRP onto the glassy carbon (GC) electrode. The direct electron transfer between electrode and HRP immobilized in lipid film has been demonstrated. The lipid films were used to supply a biological environment resembling biomembrane on the surface of the electrode. A pair of redox peaks attributed to the direct redox reaction of HRP were observed in the phosphate buffer solution (pH 5.5). The cathodic peak current increased dramatically while anodic peak decreased by addition of small amount H2O2. The pH effect on amperometric response to H2O2 was studied. The biosensor also exhibited fast response (5 s), good stability and reproducibility.

Conformation change of horseradish peroxidase in lipid membrane

The electrochemical behavior of horseradish peroxidase (HRP) in the dimyristoyl phosphatidylcholine (DMPC) bilayer on the glassy carbon (GC) electrode was studied by cyclic voltammetry. The direct electron transfer of HRP was observed in the DMPC bilayer. Only a small cathodic peak was observed for HRP on the bare GC electrode. The electron transfer of HRP in the DMPC membrane is facilitated by DMPC membrane. UV-Vis and circular dichroism (CD) spectroscopy were used to study the interaction between HRP and DMPC membrane. On binding to the DMPC membrane the secondary structure of HRP remains unchanged while there is a substantial change in the conformation of the heme active site. Tapping mode atomic force microscopy (AFM) was first applied for the investigation on the structure of HRP adsorbed on supported phospholipid bilayer on the mica and on the bare mica. HRP molecules adsorb and aggregate on the mica without DMPC bilayer. The aggregation indicates an attractive interaction among the adsorbed molecules. The molecules are randomly distributed in the DMPC bilayer. The adsorption of HRP in the DMPC bilayer changes drastically the domains and defects in the DMPC bilayer due to a strong interaction between HRP and DMPC films.

A method to construct a third-generation horseradish peroxidase biosensor: Self-assembling gold nanoparticles to three-dimensional sol-gel network

A novel method for fabrication of horseradish peroxidase biosensor has been developed by self-assembling gold nanoparticles to a thiol-containing sol-gel network. A cleaned gold electrode was first immersed in a hydrolyzed (3-mercaptopropyl)-trimethoxysilane (MPS) sol-gel solution to assemble three-dimensional silica gel, and then gold nanoparticles were chemisorbed onto the thiol groups of the sol-gel network. Finally, horseradish peroxidase (HRP) was adsorbed onto the surface of the gold nanoparticles. The distribution of gold nanoparticles and HRP was examined by atomic force microscopy (AFM). The immobilized horseradish peroxidase exhibited direct electrochemical behavior toward the reduction of hydrogen peroxide. The performance and factors influencing the performance of the resulting biosensor were studied in detail. The resulting biosensor exhibited fast amperometric response (2.5 s) to H2O2. The detection limit of the biosensor was 2.0 mumol L-1, and the linear range was from 5.0 mumol L-1 to 10.0 mmol L-1. Moreover, the studied biosensor exhibited high sensitivity, good reproducibility, and long-term stability.

In situ electrochemical scanning tunnelling microscopy investigation of structure for horseradish peroxidase and its electrocatalytic property

Immobilization of protein molecules is a fundamental problem for scanning tunnelling microscopy (STM) measurements with high resolution. In this paper, an electrochemical method has been proved to be an effective way to fix native horseradish peroxidase (HRP) as well as inactivated HRP from electrolyte onto a highly oriented pyrolytic graphite (HOPG) surface. This preparation is suitable for both ex situ and in situ electrochemical STM (ECSTM) measurements. In situ STM has been successfully employed to observe totally different structures of HRP in three typical cases: (1) in situ ECSTM reveals an oval-shaped pattern for a single molecule in neutral buffer solution, which is in good agreement with the dimension determined as 6.2 x 4.3 x 1.2. nm(3) by ex situ STM for native HRP; (2) in situ ECSTM shows that the adsorbed HRP molecules on HOPG in a denatured environment exhibit swelling globes at the beginning and then change into a V-shaped pattern after 30 min; (3) in situ ECSTM reveals a black hole in every ellipsoidal sphere for inactivated HRP in strong alkali solution. The cyclic voltammetry results indicate that the adsorbed native HRP can directly catalyse the reduction of hydrogen peroxide, demonstrating that a direct electron transfer reduction occurred between the enzyme and HOPG electrode, whereas the corresponding cyclic voltammograms for denatured HRP and inactivated HRP adsorbed on HOPG electrodes indicate a lack of ability to catalyse H2O2 reduction, which confirms that the HRP molecules lost their biological activity. Obviously, electrochemical results powerfully support in situ STM observations.

ALTERNATIVE ROUTES TO DEUTERATION IN DARK CLOUDS

We investigate new approaches to the deuteration of C3H2, HC3N and HC5N in dark clouds, following the suggestion that protonated HC3N might form different isomers, a linear structure (HC3NH+) being the most stable. We consider the effect of linear HC3NH+ and HC5NH+ on the formation of HC3N and HC5N, and find that deuteration ratios at approximately 10 K are reduced, in the case of HC3N to values significantly below those observed, such that a deuteration mechanism other than direct deuteron transfer is probably required for cold clouds.

Évaluation d’implantation d’un programme de transfert de connaissances par agents multiplicateurs pour la prévention des mauvais traitements chez les jeunes enfants

L’étude des pratiques de prévention en santé publique laisse voir que les innovations basées sur des données probantes ne sont pas toujours les plus utilisées (Ringwalt et al. 2002, Wandersman et Florin 2003). Dans la volonté de mettre de l’avant non seulement une innovation basée sur des données probantes, mais aussi une innovation réellement utile à la communauté que le Centre de liaison sur l’intervention et la prévention psychosociale (CLIPP) a mis sur pied en 2006 le programme de formation par agents multiplicateurs «Agir en milieu de garde» ayant pour principal objectif la prévention des mauvais traitements chez les jeunes enfants. La présente étude vise à décrire l’implantation de ce programme dans les services de garde en milieu familial du Québec et à examiner les processus qui ont influencé cette implantation. Les résultats exposent le niveau d’implantation sur deux plans : le dosage et la fidélité. L’étude des processus d’implantation permet de documenter l’influence sur le niveau d’implantation de quatre types de facteurs : individuels, organisationnels, communautaires et propres à l’innovation ainsi que l’influence des interactions entre ces différents facteurs.

Développement d’une méthode de transfert de protéines présentes dans des sections tissulaires minces sur des cibles fonctionnalisées pour augmenter la spécificité de l’imagerie MS du protéome

L’imagerie par spectrométrie de masse (IMS) est une technique en pleine expansion et utilisée dans beaucoup d’études effectuées sur des systèmes biologiques tels que la corrélation entre l’expression moléculaire et l’état de santé d’un tissu et pour étudier la biologie du développement. Cependant, plus particulièrement lors de l’analyse de protéines, seulement les molécules les plus abondantes et/ou les plus facilement ionisables seront détectées. L’une des approches utilisées pour éviter cette limitation est de transférer les protéines de manière sélective à partir d’une section tissulaire mince vers une surface fonctionnalisée tout en maintenant leur organisation spatiale. Dans ce cas, seulement les protéines possédant une affinité pour la surface seront alors retenues alors que les autres seront éliminées. Donc, la nature chimique de cette surface est critique. Les travaux de recherches présentés dans ce mémoire portent sur le développement d’une méthode de transfert des protéines d’une section tissulaire vers une surface composée de nitrocellulose. Cette méthode utilise un système permettant d’effectuer le transfert sans contact physique direct entre les surfaces. De plus, lors du transfert, une pression physique est appliquée. Dans une première approche, la méthode développée a été appliquée en utilisant une section de rein de souris comme échantillon modèle. Des sections sérielles ont été collectées, soit pour être colorées à l’aide d’hématoxyline et d’éosine (H&E) afin de démontrer la régiospécificité du transfert, soit pour être analysées directement par IMS afin de déterminer si les protéines détectées après transfert sont également détecter dans les sections analysées directement. Les résultats obtenus ont démontré qu’un sous-ensemble de protéines a été transféré tout en conservant leur position spatiale initiale dans les sections. Certains signaux observés pour les protéines transférées sont uniques et/ou sont nettement mieux détectés que lors de l’analyse directe d’une section.

El crédito público, una palanca financiera para la transformación de las condiciones de vida de los colombianos (2006-2014)

La presente investigación busca explicar el monto y el uso del crédito público como una palanca financiera para la transformación de las condiciones de vida de los colombianos (2006-2014). En primer lugar, se pretende describir la evolución de la deuda (crédito) y la estrategia de su gestión. En seguida, se analizará un proyecto relevante en educación, salud, vivienda, medio ambiente y familias en acción financiados con recursos de crédito de 2006-2014, y por último, se identificará cómo el gasto público social, unido con recursos del crédito, ha contribuido al mejoramiento de las condiciones de vida de los colombianos.

Educación de la sexualidad, prácticas docentes y conocimientos de los estudiantes: una evaluación del Programa de Educación para la Sexualidad y Construcción de Ciudadanía (PESCC)

Este documento presenta los resultados del componente cuantitativo de la evaluación del Programa de Educación para la Sexualidad y Construcción de Ciudadanía (PESCC) del Ministerio de Educación Nacional de Colombia (MEN). Para identificar el efecto, la estrategia empírica explota la variación en la implementación del componente pedagógico del PESCC entre los colegios y la variación en el componente de fortalecimiento institucional del programa a nivel departamental. El principal hallazgo de este trabajo es que el PESCC mejora las prácticas docentes de planeación y los conocimientos de los estudiantes en servicios en salud sexual y reproductiva y en derechos humanos sexuales y reproductivos. No hay efectos significativos en otros índices de Conocimientos, Actitudes o Prácticas (CAP) de profesores o estudiantes.

Immobilization of Catalysts of Biological Interest on Porous Oxidized Silicon Surfaces

The present paper deals with the immobilization of redox mediators and proteins onto protected porous silicon surfaces to obtain their direct electrochemical reactions and to retain their bioactivities. This paper shows that MP-11 and viologens are able to establish chemical bonds with 3-aminopropyltriethoxylsilane-modified porous silicon surface. The functionalization of the surfaces have been fully characterized by energy dispersive X-ray analysis (EDX) and X-ray photoelectron spectroscopy (XPS) to examine the immobilization of these mediators onto the solid surface. Amperometric and open circuit potential measurements have shown the direct electron transfer between glucose oxidase and the electrode in the presence of the viologen mediator covalently linked to the 3-aminopropyltriethoxylsilane (APTES)-modified porous silicon surfaces.

Electrochemical determination of the antioxidant capacity: The ceric reducing/antioxidant capacity (CRAC) assay

The CRAC assay is a direct electron transfer test of antioxidant capacity for several organic compounds. The ability of eight different compounds in reducing Cc 41 was studied by chronoamperometric measurements of the remaining Ce(3+) species. The following antioxidant classification was observed: tannic acid >> quercetin > rutin > gallic acid approximate to catechin > ascorbic acid > BHA > Trolox. These results agree with others already published and a good correlation (R(2) = 0.937) was found with the classical spectrophotometric FRAP assay. The CRAC assay is simple, fast, free from sample pretreatment and applicable to nontransparent samples.