Procedures’ costs related to outpatient chemotherapy treatment of women suffering from breast cancer

To identify the direct cost of procedures related to an outpatient chemotherapy treatment for women with breast cancer. Method: This is a quantitative research, using the case study methodology, performed in an outpatient chemotherapy of a private hospital. The total cost was calculated by multiplying the time spent by professionals involved in therapeutic procedures, the unit cost of direct labor, adding to the cost of materials, drugs and solutions. For performing the calculations, we used the Brazilian currency (R$). Results: The average total cost per chemotherapy session corresponded to R$ 1,783.01 (100%), being R$ 1,671.66 (93,75%) spent with drugs, R$ 74,98 (4.21%) with materials, R$ 28.49 (1.60%) with labor and R$ 7.88 (0.44%) with solutions. Conclusion: The results may support discussions and decision making for the management of costs related to chemotherapy aimed at reducing expenses and eliminating waste without harm to the care provided. 


Costs of reusable and disposable aprons in a public teaching hospital

Objective To analyze the direct cost of reusable and disposable aprons in a public teaching hospital. Method Cross-sectional study of quantitative approach, focusing on the direct cost of reusable and disposable aprons at a teaching hospital in northern Paraná. The study population consisted of secondary data collected in reports of the cost of services, laundry, materials and supplies division of the institution for the year 2012 Results We identified a lower average cost of using disposable apron when compared to the reusable apron. The direct cost of reusable apron was R$ 3.06, and the steps of preparation and washing were mainly responsible for the high cost, and disposable apron cost was R$ 0.94. Conclusion The results presented are important for hospital managers properly allocate resources and manage costs in hospitals
.

Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$) originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%). It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%). CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

Does direct democracy reduce the size of government? New evidence from historical data, 1890-2000

Using historical data for all Swiss cantons from 1890 to 2000, we estimate the causal effect of direct democracy on government spending. The main innovation in this paper is that we use fixed effects to control for unobserved heterogeneity and instrumental variables to address the potential endogeneity of institutions. We find that the budget referendum and lower costs to launch a voter initiative are effective tools in reducing canton level spending. However, we find no evidence that the budget referendum results in more decentralized government or a larger local government. Our instrumental variable estimates suggest that a mandatory budget referendum reduces the size of canton spending between 13 and 19 percent. A 1 percent lower signature requirement for the initiative reduces canton spending by up to 2 percent.

Análisis del comportamiento de los resultados en 'full' y 'direct costing'

In this paper we perform a mathematical analyse of profits and losses indirect and full costing. They are compared in different situations, mainlythe utilisation of productive capacity and the existence of beginninginventories. Direct costing was conceived as a system of cost accountingwhich would show profits as a function of sales. In full costing profitsdepend on available combinations of sales, production, costs of beginninginventories, etc., and information displayed in financial statements displayappears incongruent. Differences in profits with full and direct costingincrease when full costing allocates fixed costs according to normalproduction, in some cases differences, and financial statements would showmore incongruent performance. It is concluded about the importance thatprofit and loss statement expresses profits in both costing systems.

The costs of disorders of the brain in Switzerland: an update from the European Brain Council Study for 2010.

BACKGROUND: In 2005, findings of the first "cost of disorders of the brain in Europe" study of the European Brain Council (EBC) showed that these costs cause a substantial economic burden to the Swiss society. In 2010 an improved update with a broader range of disorders has been analysed. This report shows the new findings for Switzerland and discusses changes. METHODS: Data are derived from the EBC 2010 census study that estimates 12-month prevalence of 12 groups of disorders of the brain and calculates costs (direct health-care costs, direct non-medical costs and indirect costs) by combining top-down and bottom up cost approaches using existing data. RESULTS: The most frequent disorder was headache (2.3 million). Anxiety disorders were found in 1 million persons and sleep disorders in 700,000 persons. Annual costs for all assessed disorders total to 14.5 billion Euro corresponding to about 1,900 EUR per inhabitant per year. Mood, psychotic disorders and dementias (appr. 2 billion EUR each) were most costly. Costs per person were highest for neurological/neurosurgery-relevant disorders, e.g. neuromuscular disorders, brain tumour and multiple sclerosis (38,000 to 24,000 EUR). CONCLUSION: The estimates of the EBC 2010 study for Switzerland provide a basis for health care planning. Increase in size and costs compared to 2005 are mostly due to the inclusion of new disorders (e.g., sleep disorders), or the re-definition of others (e.g., headache) and to an increase in younger cohorts. We suggest coordinated research and preventive measures coordinated between governmental bodies, private health-care and pharmaceutical companies.

Direct-on-line axial flux permanent magnet synchronous generator static and dynamic performance

In distributed energy production, permanent magnet synchronous generators (PMSG) are often connected to the grid via frequency converters, such as voltage source line converters. The price of the converter may constitute a large part of the costs of a generating set. Some of the permanent magnet synchronous generators with converters and traditional separately excited synchronous generators couldbe replaced by direct-on-line (DOL) non-controlled PMSGs. Small directly networkconnected generators are likely to have large markets in the area of distributed electric energy generation. Typical prime movers could be windmills, watermills and internal combustion engines. DOL PMSGs could also be applied in island networks, such as ships and oil platforms. Also various back-up power generating systems could be carried out with DOL PMSGs. The benefits would be a lower priceof the generating set and the robustness and easy use of the system. The performance of DOL PMSGs is analyzed. The electricity distribution companies have regulations that constrain the design of the generators being connected to the grid. The general guidelines and recommendations are applied in the analysis. By analyzing the results produced by the simulation model for the permanent magnet machine, the guidelines for efficient damper winding parameters for DOL PMSGs are presented. The simulation model is used to simulate grid connections and load transients. The damper winding parameters are calculated by the finite element method (FEM) and determined from experimental measurements. Three-dimensional finite element analysis (3D FEA) is carried out. The results from the simulation model and 3D FEA are compared with practical measurements from two prototype axial flux permanent magnet generators provided with damper windings. The dimensioning of the damper winding parameters is case specific. The damper winding should be dimensioned based on the moment of inertia of the generating set. It is shown that the damper winding has optimal values to reach synchronous operation in the shortest period of time after transient operation. With optimal dimensioning, interferenceon the grid is minimized.

Détermination du coût direct lors d'une procédure de cathétérisation d'une angioplastie avec ou sans pose de stent au CHUV

Cette étude consiste à comparer les coûts de deux procédures de dilatation artérielle coronaire (angioplastie par ballonet et angioplastie avec pose de stent) uniquement lors de la phase de cathérisation (et non pas de l'ensemble des coûts du séjour hospitalier). La première partie traite de l'importance de la maladie coronarienne, de ses traitements et des objectifs de l'étude. La deuxième partie explique les éléments et la méthode qui composent le calcul des coûts, illustre les résultats et compare les résultats des deux procédures. La troisième partie analyse les résultats en identifiant quels types de coûts sont à l'origine de la différence du coût total et en explicitant les limites et les compléments nécessaires à l'étude.

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Estimation of lung cancer diagnosis and treatment costs based on a patient-level analysis in Catalonia (Spain)

Background: Assessing of the costs of treating disease is necessary to demonstrate cost-effectiveness and to estimate the budget impact of new interventions and therapeutic innovations. However, there are few comprehensive studies on resource use and costs associated with lung cancer patients in clinical practice in Spain or internationally. The aim of this paper was to assess the hospital cost associated with lung cancer diagnosis and treatment by histology, type of cost and stage at diagnosis in the Spanish National Health Service. Methods: A retrospective, descriptive analysis on resource use and a direct medical cost analysis were performed. Resource utilisation data were collected by means of patient files from nine teaching hospitals. From a hospital budget impact perspective, the aggregate and mean costs per patient were calculated over the first three years following diagnosis or up to death. Both aggregate and mean costs per patient were analysed by histology, stage at diagnosis and cost type. Results: A total of 232 cases of lung cancer were analysed, of which 74.1% corresponded to non-small cell lung cancer (NSCLC) and 11.2% to small cell lung cancer (SCLC); 14.7% had no cytohistologic confirmation. The mean cost per patient in NSCLC ranged from 13,218 Euros in Stage III to 16,120 Euros in Stage II. The main cost components were chemotherapy (29.5%) and surgery (22.8%). Advanced disease stages were associated with a decrease in the relative weight of surgical and inpatient care costs but an increase in chemotherapy costs. In SCLC patients, the mean cost per patient was 15,418 Euros for limited disease and 12,482 Euros for extensive disease. The main cost components were chemotherapy (36.1%) and other inpatient costs (28.7%). In both groups, the Kruskall-Wallis test did not show statistically significant differences in mean cost per patient between stages. Conclusions: This study provides the costs of lung cancer treatment based on patient file reviews, with chemotherapy and surgery accounting for the major components of costs. This cost analysis is a baseline study that will provide a useful source of information for future studies on cost-effectiveness and on the budget impact of different therapeutic innovations in Spain.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Novel retrograde puncture method to establish preperitoneal space for laparoscopic direct inguinal hernia repair with internal ring suturing

The aim of this study was to explore the clinical efficacy of a novel retrograde puncture approach to establish a preperitoneal space for laparoscopic direct inguinal hernia repair with inguinal ring suturing. Forty-two patients who underwent laparoscopic inguinal hernia repair with retrograde puncture for preperitoneal space establishment as well as inguinal ring suturing between August 2013 and March 2014 at our hospital were enrolled. Preperitoneal space was successfully established in all patients, with a mean establishment time of 6 min. Laparoscopic repairs were successful in all patients, with a mean surgical time of 26±15.1 min. Mean postoperative hospitalization duration was 3.0±0.7 days. Two patients suffered from postoperative local hematomas, which were relieved after puncturing and drainage. Four patients had short-term local pain. There were no cases of chronic pain. Patients were followed up for 6 months to 1 year, and no recurrence was observed. Our results demonstrate that preperitoneal space established by the retrograde puncture technique can be successfully used in adult laparoscopic hernioplasty to avoid intraoperative mesh fixation, and thus reduce medical costs.

Omnibus accounts to Finnish investors? – An analysis of the costs and benefits that omnibus account structure brings to Finnish account operators and investors

The Finnish Securities Markets are being harmonized to enable better, more reliable and timely settlement of securities. Omnibus accounts are a common practice in the European securities markets. Finland forbids the use of omnibus accounts from its domestic investors. There is a possibility that the omnibus account usage is allowed for Finnish investors in the future. This study aims to build a comprehensive image to Finnish investors and account operators in determining the costs and benefits that the omnibus account structure would have for them. This study uses qualitative research methods. A literature review provides the framework for this study. Different kinds of research articles, regulatory documents, studies performed by European organisations, and Finnish news reportages are used to analyse the costs and benefits of omnibus accounts. The viewpoint is strictly of account operators and investors, and different effects on them are contemplated. The results of the analysis show that there are a number of costs and benefits that investors and account operators must take into consideration regarding omnibus accounts. The costs are related to development of IT-systems so that participants are able to adapt to the new structure and operate according to its needs. Decrease in the holdings’ transparency is a disadvantage of the structure and needs to be assessed precisely to avoid some problems it might bring. Benefits are mostly related to the increased competition in the securities markets as well as to the possible cost reductions of securities settlement. The costs and benefits were analysed according to the study plan of this thesis and as a result, the significance and impact of omnibus accounts to Finnish investors and account operators depends on the competition level and the decisions that all market participants make when determining if the account structure is beneficial for their operations.

Costs of Reproduction in Breeding Female Mallards: Predation Risk during Incubation Drives Annual Mortality

The effort expended on reproduction may entail future costs, such as reduced survival or fecundity, and these costs can have an important influence on life-history optimization. For birds with precocial offspring, hypothesized costs of reproduction have typically emphasized nutritional and energetic investments in egg formation and incubation. We measured seasonal survival of 3856 radio-marked female Mallards (Anas platyrhynchos) from arrival on the breeding grounds through brood-rearing or cessation of breeding. There was a 2.5-fold direct increase in mortality risk associated with incubating nests in terrestrial habitats, whereas during brood-rearing when breeding females occupy aquatic habitats, mortality risk reached seasonal lows. Mortality risk also varied with calendar date and was highest during periods when large numbers of Mallards were nesting, suggesting that prey-switching behaviors by common predators may exacerbate risks to adults in all breeding stages. Although prior investments in egg laying and incubation affected mortality risk, most relationships were not consistent with the cost of reproduction hypothesis; birds with extensive prior investments in egg production or incubation typically survived better, suggesting that variation in individual quality drove both relationships. We conclude that for breeding female Mallards, the primary cost of reproduction is a fixed cost associated with placing oneself at risk to predators while incubating nests in terrestrial habitats.

Direct investment in real estate

Momentum strategies have the potential to generate extra profits in private real estate markets. Tests of a variety of frequencies of portfolio reweighting identify periods of winner and loser performance. There are strong potential gains from momentum strategies that are based on prior returns over a 6- to 12-month period. Whether these gains are attainable for real-world investors depends on transaction costs, but some momentum strategies do produce net excess returns. The findings hold even if returns are unsmoothed to reflect underlying market prices.