Productivity and optimum plant density of pigeonpea in different environments in Tanzania

The objective of the present study was to determine the optimum plant density of four pigeonpea genotypes, representing early, medium and late maturing types, grown in five contrasting environments in Tanzania. ICPL 86005 (early), Kat 50/3 and QP 37 (medium) and Local (late) were grown at four plant densities (40 000-320 000 plants/ha) in irrigated and rainfed conditions at Ilonga and under rainfed conditions at Kibaha, Selian and Ismani. At maturity, total above-ground biomass and seed yield (SY) were measured. The highest yields were obtained in the irrigated experiment at Ilonga, where the medium/late genotypes produced 25 t biomass/ha and 5 center dot 6 t seed/ha. The lowest SY were at Kibaha, 0 58 to 1 center dot 76 t/ha, where a severe drought occurred. In nearly all cases the response to density was linear or asymptotic. The response of ICPL 86005 was significantly different from the other three genotypes. The optimum density for SY varied from 37 000 to 227 000 plants/ha in ICPL 86005, compared with 3000 to 101000 plants/ha in the medium/late genotypes. The highest optimum density was at Selian and Ismani and the lowest at Ilonga and Kibaha, where drought occurred. Optimum densities therefore varied greatly with genotype (duration) and environment, and this variation needs to be considered when planning trials.

Determination of the density of the multiple access interference of a CDMA system from its moments

A standard CDMA system is considered and an extension of Pearson's results is used to determine the density function of the interference. The method is shown to work well in some cases, but not so in others. However this approach can be useful in further determining the probability of error of the system with minimal computational requirements.

Sampling series for determination of probability density of CDMA multiple access interference

Consideration is given to a standard CDMA system and determination of the density function of the interference with and without Gaussian noise using sampling theory concepts. The formula derived provides fast and accurate results and is a simple, useful alternative to other methods

Density of insect-pollinated grassland plants decreases with increasing surrounding land-use intensity

Pollinator declines have raised concerns about the persistence of plant species that depend on insect pollination, in particular by bees, for their reproduction. The impact of pollinator declines remains unknown for species-rich plant communities found in temperate seminatural grasslands. We investigated effects of land-use intensity in the surrounding landscape on the distribution of plant traits related to insect pollination in 239 European seminatural grasslands. Increasing arable land use in the surrounding landscape consistently reduced the density of plants depending on bee and insect pollination. Similarly, the relative abundance of bee-pollination-dependent plants increased with higher proportions of non-arable agricultural land (e.g. permanent grassland). This was paralleled by an overall increase in bee abundance and diversity. By isolating the impact of the surrounding landscape from effects of local habitat quality, we show for the first time that grassland plants dependent on insect pollination are particularly susceptible to increasing land-use intensity in the landscape.

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Thermal properties and degree of conversion (DC%) of two composite resins (microhybrid and nanocomposite) and two photo-activation methods (continuous and gradual) displayed by the light-emitting diode (LED) light-curing units (LCUs) were investigated in this study. Differential scanning calorimetry (DSC) thermal analysis technique was used to investigate the glass transition temperature (T(g)) and degradation temperature. The DC% was determined by Fourier transform infrared spectroscopy (FT-IR). The results showed that the microhybrid composite resin presented the highest T(g) and degradation temperature values, i.e., the best thermal stability. Gradual photo-activation methods showed higher or similar T(g) and degradation temperature values when compared to continuous method. The Elipar Freelight 2 (TM) LCU showed the lowest T(g) values. With respect to the DC%, the photo-activation method did not influence the final conversion of composite resins. However, Elipar Freelight 2 (TM) LCU and microhybrid resin showed the lowest DC% values. Thus, the presented results suggest that gradual method photo-activation with LED LCUs provides adequate degree of conversion without promoting changes in the polymer chain of composite resins. However, the thermal properties and final conversion of composite resins can be influenced by the kind of composite resin and LCU.

Distribution and density of the hooded plover Thinornis rubricollis along a remote coastline in North West Tasmania

The Arthur-Pieman Conservation Area, on the north-west coast of Tasmania, provides many kilometres of ocean beach habitat for the vulnerable Hooded Plover Thinornis rubricollis. Hooded Plovers were surveyed along a 43.5 km section of coast which included both rocky shores and sandy beaches. They were absent from the rocky portion of the coastline (17.0 km), but 65 individuals were recorded along the sandy portion of coastline (26.5 km). The recorded population density of 2.45 birds/km compares favourably with reported mean densities for most parts of south-eastern Australia. Careful management and monitoring are required if the current numbers of the Hooded Plover in this area are to be maintained.

Energy density of foods and beverages in the Australian food supply: influence of macronutrients and comparison to dietary intake

Objectives: The energy density (ED) of the diet is considered an important determinant of total energy intake and thus energy balance and weight change. We aimed to compare relationships between ED and macronutrient content in individual food and beverage items as well as population diet in a typical Western country. Design: Nutrient data for 3673 food items and 247 beverage items came from the Australian Food and Nutrient database (AusNut). Food and beverage intake data came from the 1995 Australian National Nutrition Survey (a 24-h dietary recall survey in 13 858 people over the age of 2). Relationships between ED and macronutrient and water content were analysed by linear regression with 95% prediction bands. Results: For both individual food items and population food intake, there was a positive relationship between ED and percent energy as fat and negative relationships between ED and percent energy as carbohydrate and percent water by weight. In all cases, there was close agreement between the slopes of the regression lines between food items and dietary intake. There were no clear relationships between ED and macronutrient content for beverage items. Carbohydrate (mostly sucrose) contributed 91, 47, and 25% of total energy for sugar-based, fat-based, and alcohol-based beverages respectively. Conclusions: The relationship between ED and fat content of foods holds true across both population diets and individual food items available in the food supply in a typical Western country such as Australia. As high-fat diets are associated with a high BMI, population measures with an overall aim of reducing the ED of diets may be effective in mediating the growing problem of overweight and obesity.

Chemical composition and tissue energy density of the cuttlefish (Sepia apama) and its assimilation efficiency by Diomedea albatrosses.

The cuttlefish Sepia apama Gray (Mollusca: Cephalopoda) is a seasonally abundant food resource exploited annually by moulting albatrosses throughout winter and early spring in the coastal waters of New South Wales, Australia. To assess its nutritional value as albatross forage, we analysed S. apama for water, lipid protein, ash contents, energy density and amino acid composition. Because albatrosses consistently consume S. apama parts preferentially in the order of head, viscera and mantle, we analysed these sections separately, but did not identify any nutritional basis for this selective feeding behaviour. The gross energy value of S. apama bodies was 20.9 kJ/g dry mass, but their high water content (>83%; cf <70% for fish) results in a relatively low energy density of 3.53 kJ/g. This may contribute to a need to take large meals, which subsequently degrade flight performance. Protein content was typically >75% dry mass, whereas fat content was only about 1%. Albatrosses feed on many species of cephalopods and teleost fish, and we found the amino acid composition of S. apama to be comparable to a range of species within these taxa. We used S. apama exclusively in feeding trials to estimate the energy assimilation efficiency for Diomedea albatrosses. We estimated their nitrogen-corrected apparent energy assimilation efficiency for consuming this prey to be 81.82 ± 0.72% and nitrogen retention as 2.90 ± 0.11 g N kg^-1 d^-1. Although S. apama has a high water content and relatively low energy density, its protein composition is otherwise comparable to other albatross prey species. Consequently, the large size and seasonal abundance of this prey should ensure that albatrosses remain replete and adequately nourished on this forage while undergoing moult.

Reducing the energy density of multiple meals decreases the energy intake of preschool-age children1,2,3

Background: The energy density (ED) of an entrée affects children's energy intake at a meal consumed ad libitum. However, the effects in children of changing the ED of meals over multiple days are unknown.

Objective: We aimed to test the effect of reducing the ED of multiple meals on the ad libitum energy intake of preschool-age children over 2 d.

Design: In this crossover study, 3- to 5-y-old children (n = 10 boys, 16 girls) were served manipulated breakfasts, lunches, and afternoon snacks 2 d/wk for 2 wk. Foods and beverages served at these meals during 1 wk were lower in ED than were those served during the other week. ED reductions were achieved by decreasing fat and sugar and by increasing fruit and vegetables. Dinner and an evening snack were sent home with children, but these meals did not vary in ED. The same 2-d menu was served in both conditions.

Results: Children consumed a consistent weight of foods and beverages over 2 d in both conditions, and therefore their energy consumption declined by 389 ± 72 kcal (14%) in the lower-ED condition, a significant decrease (P < 0.0001). Differences in energy intake were significant at breakfast on day 1, and they accumulated at manipulated meals over 2 d (P < 0.01). Intake of the nonmanipulated meals was similar between conditions.

Conclusions: Children's energy intake is influenced by the ED of foods and beverages served over multiple days. These results strengthen the evidence that reducing the ED of the diet is an effective strategy for moderating children's energy intake.

Reducing the energy density of an entrée decreases children’s energy intake at lunch

Background: Strategies need to be developed to reduce preschool children’s energy intake.

Objective: To test the effect of reducing the energy density of an entrée on children’s ad libitum energy intake.

Subjects: Subjects were 2- to 5-year-old children (37 boys and 40 girls) in a university day-care facility.

Intervention: In this within-subjects crossover study, children were served a test lunch once per week for 6 weeks. Two versions of a macaroni and cheese entrée were formulated to differ in energy density while maintaining similar palatability. Each version was served to children three times. The higher-energy-density entrée had 2.0 kcal/g and the other entrée was 30% lower in energy density. Lunch, consumed ad libitum, also included broccoli, applesauce, and milk.

Main outcome measures: Food intake and energy intake were measured.

Statistical analyses: A mixed linear model tested effect of energy density of the entrée on food intake and energy intake. Results are reported as mean±standard error.

Results: Decreasing the energy density of the entrée by 30% significantly (P<0.0001) reduced children’s energy intake from the entrée by 25% (72.3±8.3 kcal) and total lunch energy intake by 18% (71.8±7.9 kcal). Children consumed significantly more of the lower-energy-density entrée (10.1±4.2 g; P<0.05). Children’s sex-specific body mass index–for-age percentiles did not affect the relationship between energy density of the entrée and children’s intakes.

Conclusions: Decreasing the energy density of a lunch entrée resulted in a reduction in children’s energy intake from the entrée and from the total meal. Reducing the energy density of foods may be an effective strategy to moderate children’s energy intake.

Misconceptions about density of decimals : insights from Indonesian pre-service teachers’ work

Extensive studies have documented various difficulties with, and misconceptions about, decimal numeration across different levels of education. This paper reports on pre-service teachers’ misconceptions about the density of decimals. Written test data from 140 Indonesian pre-service teachers, observation of group and classroom discussions provided evidence of pre-service teachers’ difficulties in grasping the density notion of decimals. This research was situated in a teacher education university in Yogyakarta, Indonesia. Incorrect analogies resulting from over generalization of knowledge about whole numbers and fractions were identified. Teaching ideas to resolve these difficulties and challenges in resolving pre-service teachers’ misconceptions are discussed. Evidence from this research indicates that it is possible to remove misconceptions about density of decimals.