Research priorities for nursing care of infants, children and adolescents: a West Australian Delphi study.

This paper describes a study that aimed to identify research priorities for the care of infants, children and adolescents at the sole tertiary referral hospital for children in Western Australia. The secondary aim was to stimulate nurses to explore clinical problems that would require further inquiry. Background. Planning for research is an essential stage of research development; involving clinicians in this exercise is likely to foster research partnerships that are pertinent to clinical practice. Nursing research priorities for the paediatric population have not previously been reported in Australia. Design. Delphi study. Method. Over 12 months in 2005-2006, a three-round questionnaire, using the Delphi technique, was sent to a randomly selected sample of registered nurses. This method was used to identify and prioritise nursing research topics relevant to the patient and the family. Content analysis was used to analyse Round I data and descriptive statistics for Round II and III data. Results. In Round I, 280 statements were identified and reduced to 37 research priorities. Analysis of data in subsequent rounds identified the top two priority research areas as (1) identification of strategies to reduce medication incidents (Mean = 6 center dot 47; SD 0 center dot 88) and (2) improvement in pain assessment and management (Mean = 6; SD 1 center dot 38). Additional comments indicated few nurses access the scientific literature or use research findings because of a lack of time or electronic access. Conclusions. Thirty-seven research priorities were identified. The identification of research priorities by nurses provided research direction for the health service and potentially other similar health institutions for children and adolescents in Australia and internationally. Relevance to clinical practice. The nurse participants showed concern about the safety of care and the well-being of children and their families. This study also enabled the identification of potential collaborative research and development of pain management improvement initiatives.

A Delphi study on National PICU nursing research priorities in Australia and New Zealand.

BACKGROUND: There is a lack of evidence to direct and support nursing practice in the specialty of paediatric intensive care (PIC). The development of national PIC nursing research priorities may facilitate the process of undertaking clinical research and translating evidence into practice. PURPOSE: To (a) identify research priorities for the care of patients and their family as well as for the professional needs of PIC nurses, (b) foster nursing research collaboration, (c) develop a research agenda for PIC nurses. METHODS: Over 13 months in 2007-2008, a three-round questionnaire, using the Delphi technique, was sent to all specialist level registered nurses working in Australian and New Zealand PICUs. This method was used to identify and prioritise nursing research topics. Content analysis was used to analyse Round I data and descriptive statistics for Round II and III data. RESULTS: In Round I, 132 research topics were identified, with 77 research priorities (mdn>6, mean MAD(median) 0.68±0.01) identified in subsequent rounds. The top nine priorities (mean>6 and median>6) included patient issues related to neurological care (n=2), pain/sedation/comfort (n=3), best practice at the end of life (n=1), and ventilation strategies (n=1), as well as two priorities related to professional issues about nurses' stress/burnout and professional development needs. CONCLUSION: The research priorities identified reflect important issues related to critically ill patients and their family as well as to the nurses caring for them. These priorities can be used for the development of a research agenda for PIC nursing in Australia and New Zealand.

Setting priorities in clinical and health services research: Properties of an adapted and updated method

Objectives: The objectives of this study is to review the set of criteria of the Institute of Medicine (IOM) for priority-setting in research with addition of new criteria if necessary, and to develop and evaluate the reliability and validity of the final priority score. Methods: Based on the evaluation of 199 research topics, forty-five experts identified additional criteria for priority-setting, rated their relevance, and ranked and weighted them in a three-round modified Delphi technique. A final priority score was developed and evaluated. Internal consistency, test–retest and inter-rater reliability were assessed. Correlation with experts’ overall qualitative topic ratings were assessed as an approximation to validity. Results: All seven original IOM criteria were considered relevant and two new criteria were added (“potential for translation into practice”, and “need for knowledge”). Final ranks and relative weights differed from those of the original IOM criteria: “research impact on health outcomes” was considered the most important criterion (4.23), as opposed to “burden of disease” (3.92). Cronbach’s alpha (0.75) and test–retest stability (interclass correlation coefficient = 0.66) for the final set of criteria were acceptable. The area under the receiver operating characteristic curve for overall assessment of priority was 0.66. Conclusions: A reliable instrument for prioritizing topics in clinical and health services research has been developed. Further evaluation of its validity and impact on selecting research topics is required

Content validation for level of use of feature rich systems: a Delphi study of electronic medical records systems

Introduction. Feature usage is a pre-requisite to realising the benefits of investments in feature rich systems. We propose that conceptualising the dependent variable 'system use' as 'level of use' and specifying it as a formative construct has greater value for measuring the post-adoption use of feature rich systems. We then validate the content of the construct as a first step in developing a research instrument to measure it. The context of our study is the post-adoption use of electronic medical records (EMR) by primary care physicians. Method. Initially, a literature review of the empirical context defines the scope based on prior studies. Having identified core features from the literature, they are further refined with the help of experts in a consensus seeking process that follows the Delphi technique. Results.The methodology was successfully applied to EMRs, which were selected as an example of feature rich systems. A review of EMR usage and regulatory standards provided the feature input for the first round of the Delphi process. A panel of experts then reached consensus after four rounds, identifying ten task-based features that would be indicators of level of use. Conclusions. To study why some users deploy more advanced features than others, theories of post-adoption require a rich formative dependent variable that measures level of use. We have demonstrated that a context sensitive literature review followed by refinement through a consensus seeking process is a suitable methodology to validate the content of this dependent variable. This is the first step of instrument development prior to statistical confirmation with a larger sample.

How the delphi and AHP methods are aiding to define the critical success factors priorities in a digital factory project implementation

Digital factory is a concept that offers a collaborative approach to enhance product and production engineering processes through simulation. Products, processes and resources are modeled to be used to develop and test the product conception and manufacturing processes, before their use in the real factory. The purpose of this paper is to present the steps to identify the Critical Success Factors (CSF) priorities in a digital factory project implementation in a Brazilian company and how the Delphi and AHP Methods are aiding to identify these CSF priorities. Copyright © 2008 SAE International.

Studies of Heavy Baryons in DELPHI and Radiation Monitoring in DØ

Between the years 1992 and 1995 about 3.5 million hadronic Z decays were collected by the DELPHI detector at CERN. This data has been used to measure the production and lifetime of the beauty strange baryon Ξb, in the inclusive decay channel Ξb →Ξ-ℓ- X. The Ξ- baryon was reconstructed through the decay Ξ- → Λ π-, using a constrained fit method for cascade decays. An iterative discriminant analysis was used for the Ξb selection. A search for the Ξb baryon was also performed using an alternative method of reconstructing the Ξ- baryon. A measurement of the production of the charmed strange baryon Ξc in the decay channel Ξc → Ξ-π+ using the same data is also presented. The radiation monitoring system of the Silicon Microstrip Tracker in the DØ detector is studied and used to estimate the radiation dose received by the Silicon detector during normal running conditions of the TeVatron accelerator.

Use of a modified Delphi panel to identify and weight criteria for prioritization of zoonotic diseases in Switzerland

Zoonotic diseases have a significant impact on public health globally. To prevent or reduce future zoonotic outbreaks, there is a constant need to invest in research and surveillance programs while updating risk management strategies. However, given the limited resources available, disease prioritization based on the need for their control and surveillance is important. This study was performed to identify and weight disease criteria for the prioritization of zoonotic diseases in Switzerland using a semi-quantitative research method based on expert opinion. Twenty-eight criteria relevant for disease control and surveillance, classified under five domains, were selected following a thorough literature review, and these were evaluated and weighted by seven experts from the Swiss Federal Veterinary Office using a modified Delphi panel. The median scores assigned to each criterion were then used to rank 16 notifiable and/or emerging zoonoses in Switzerland. The experts weighted the majority of the criteria similarly, and the top three criteria were Severity of disease in humans, incidence and prevalence of the disease in humans and treatment in humans. Based on these weightings, the three highest ranked diseases were Avian Influenza, Bovine Spongiform Encephalitis, and Bovine Tuberculosis. Overall, this study provided a preliminary list of criteria relevant for disease prioritization in Switzerland. These were further evaluated in a companion study which involved a quantitative prioritization method and multiple stakeholders.

PIPc study: development of indicators of potentially inappropriate prescribing in children (PIPc) in primary care using a modified Delphi technique

Objective There is limited evidence regarding the quality of prescribing for children in primary care. Several prescribing criteria (indicators) have been developed to assess the appropriateness of prescribing in older and middle-aged adults but few are relevant to children. The objective of this study was to develop a set of prescribing indicators that can be applied to prescribing or dispensing data sets to determine the prevalence of potentially inappropriate prescribing in children (PIPc) in primary care settings.


Design Two-round modified Delphi consensus method.


Setting Irish and UK general practice.


Participants A project steering group consisting of academic and clinical general practitioners (GPs) and pharmacists was formed to develop a list of indicators from literature review and clinical expertise. 15 experts consisting of GPs, pharmacists and paediatricians from the Republic of Ireland and the UK formed the Delphi panel.


Results 47 indicators were reviewed by the project steering group and 16 were presented to the Delphi panel. In the first round of this exercise, consensus was achieved on nine of these indicators. Of the remaining seven indicators, two were removed following review of expert panel comments and discussion of the project steering group. The second round of the Delphi process focused on the remaining five indicators, which were amended based on first round feedback. Three indicators were accepted following the second round of the Delphi process and the remaining two indicators were removed. The final list consisted of 12 indicators categorised by respiratory system (n=6), gastrointestinal system (n=2), neurological system (n=2) and dermatological system (n=2).


Conclusions The PIPc indicators are a set of prescribing criteria developed for use in children in primary care in the absence of clinical information. The utility of these criteria will be tested in further studies using prescribing databases.

A Highly Improved Method For Sensitive Determination Of Amitriptyline In Pharmaceutical Formulations Using An Unmodified Carbon Nanotube Electrode In The Presence Of Sulfuric Acid.

The present paper describes a novel, simple and reliable differential pulse voltammetric method for determining amitriptyline (AMT) in pharmaceutical formulations. It has been described for many authors that this antidepressant is electrochemically inactive at carbon electrodes. However, the procedure proposed herein consisted in electrochemically oxidizing AMT at an unmodified carbon nanotube paste electrode in the presence of 0.1 mol L(-1) sulfuric acid used as electrolyte. At such concentration, the acid facilitated the AMT electroxidation through one-electron transfer at 1.33 V vs. Ag/AgCl, as observed by the augmentation of peak current. Concerning optimized conditions (modulation time 5 ms, scan rate 90 mV s(-1), and pulse amplitude 120 mV) a linear calibration curve was constructed in the range of 0.0-30.0 μmol L(-1), with a correlation coefficient of 0.9991 and a limit of detection of 1.61 μmol L(-1). The procedure was successfully validated for intra- and inter-day precision and accuracy. Moreover, its feasibility was assessed through analysis of commercial pharmaceutical formulations and it has been compared to the UV-vis spectrophotometric method used as standard analytical technique recommended by the Brazilian Pharmacopoeia.

Influence Of Delivery Method On Neuroprotection By Bone Marrow Mononuclear Cell Therapy Following Ventral Root Reimplantation With Fibrin Sealant.

The present work compared the local injection of mononuclear cells to the spinal cord lateral funiculus with the alternative approach of local delivery with fibrin sealant after ventral root avulsion (VRA) and reimplantation. For that, female adult Lewis rats were divided into the following groups: avulsion only, reimplantation with fibrin sealant; root repair with fibrin sealant associated with mononuclear cells; and repair with fibrin sealant and injected mononuclear cells. Cell therapy resulted in greater survival of spinal motoneurons up to four weeks post-surgery, especially when mononuclear cells were added to the fibrin glue. Injection of mononuclear cells to the lateral funiculus yield similar results to the reimplantation alone. Additionally, mononuclear cells added to the fibrin glue increased neurotrophic factor gene transcript levels in the spinal cord ventral horn. Regarding the motor recovery, evaluated by the functional peroneal index, as well as the paw print pressure, cell treated rats performed equally well as compared to reimplanted only animals, and significantly better than the avulsion only subjects. The results herein demonstrate that mononuclear cells therapy is neuroprotective by increasing levels of brain derived neurotrophic factor (BDNF) and glial derived neurotrophic factor (GDNF). Moreover, the use of fibrin sealant mononuclear cells delivery approach gave the best and more long lasting results.

Uv-vis Spectra As An Alternative To The Lowry Method For Quantify Hair Damage Induced By Surfactants.

It is well known that long term use of shampoo causes damage to human hair. Although the Lowry method has been widely used to quantify hair damage, it is unsuitable to determine this in the presence of some surfactants and there is no other method proposed in literature. In this work, a different method is used to investigate and compare the hair damage induced by four types of surfactants (including three commercial-grade surfactants) and water. Hair samples were immersed in aqueous solution of surfactants under conditions that resemble a shower (38 °C, constant shaking). These solutions become colored with time of contact with hair and its UV-vis spectra were recorded. For comparison, the amount of extracted proteins from hair by sodium dodecyl sulfate (SDS) and by water were estimated by the Lowry method. Additionally, non-pigmented vs. pigmented hair and also sepia melanin were used to understand the washing solution color and their spectra. The results presented herein show that hair degradation is mostly caused by the extraction of proteins, cuticle fragments and melanin granules from hair fiber. It was found that the intensity of solution color varies with the charge density of the surfactants. Furthermore, the intensity of solution color can be correlated to the amount of proteins quantified by the Lowry method as well as to the degree of hair damage. UV-vis spectrum of hair washing solutions is a simple and straightforward method to quantify and compare hair damages induced by different commercial surfactants.

Graded Meshes In Bio-thermal Problems With Transmission-line Modeling Method.

In this study, the transmission-line modeling (TLM) applied to bio-thermal problems was improved by incorporating several novel computational techniques, which include application of graded meshes which resulted in 9 times faster in computational time and uses only a fraction (16%) of the computational resources used by regular meshes in analyzing heat flow through heterogeneous media. Graded meshes, unlike regular meshes, allow heat sources to be modeled in all segments of the mesh. A new boundary condition that considers thermal properties and thus resulting in a more realistic modeling of complex problems is introduced. Also, a new way of calculating an error parameter is introduced. The calculated temperatures between nodes were compared against the results obtained from the literature and agreed within less than 1% difference. It is reasonable, therefore, to conclude that the improved TLM model described herein has great potential in heat transfer of biological systems.

Trichomes Related To An Unusual Method Of Water Retention And Protection Of The Stem Apex In An Arid Zone Perennial Species.

It is well known that trichomes protect plant organs, and several studies have investigated their role in the adaptation of plants to harsh environments. Recent studies have shown that the production of hydrophilic substances by glandular trichomes and the deposition of this secretion on young organs may facilitate water retention, thus preventing desiccation and favouring organ growth until the plant develops other protective mechanisms. Lychnophora diamantinana is a species endemic to the Brazilian 'campos rupestres' (rocky fields), a region characterized by intense solar radiation and water deficits. This study sought to investigate trichomes and the origin of the substances observed on the stem apices of L. diamantinana. Samples of stem apices, young and expanded leaves were studied using standard techniques, including light microscopy and scanning and transmission electron microscopy. Histochemical tests were used to identify the major groups of metabolites present in the trichomes and the hyaline material deposited on the apices. Non-glandular trichomes and glandular trichomes were observed. The material deposited on the stem apices was hyaline, highly hydrophilic and viscous. This hyaline material primarily consists of carbohydrates that result from the partial degradation of the cell wall of uniseriate trichomes. This degradation occurs at the same time that glandular trichomes secrete terpenoids, phenolic compounds and proteins. These results suggest that the non-glandular trichomes on the leaves of L. diamantinana help protect the young organ, particularly against desiccation, by deposition of highly hydrated substances on the apices. Furthermore, the secretion of glandular trichomes probably repels herbivore and pathogen attacks.

Tissue Microarray Is A Reliable Method For Immunohistochemical Analysis Of Pleomorphic Adenoma.

To determine the most adequate number and size of tissue microarray (TMA) cores for pleomorphic adenoma immunohistochemical studies. Eighty-two pleomorphic adenoma cases were distributed in 3 TMA blocks assembled in triplicate containing 1.0-, 2.0-, and 3.0-mm cores. Immunohistochemical analysis against cytokeratin 7, Ki67, p63, and CD34 were performed and subsequently evaluated with PixelCount, nuclear, and microvessel software applications. The 1.0-mm TMA presented lower results than 2.0- and 3.0-mm TMAs versus conventional whole section slides. Possibly because of an increased amount of stromal tissue, 3.0-mm cores presented a higher microvessel density. Comparing the results obtained with one, two, and three 2.0-mm cores, there was no difference between triplicate or duplicate TMAs and a single-core TMA. Considering the possible loss of cylinders during immunohistochemical reactions, 2.0-mm TMAs in duplicate are a more reliable approach for pleomorphic adenoma immunohistochemical study.

Use Of Experimental Design To Optimize A Triple-potential Waveform To Develop A Method For The Determination Of Streptomycin And Dihydrostreptomycin In Pharmaceutical Veterinary Dosage Forms By Hplc-pad.

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%.