Experimental investigation of dynamic pressure loads during dam break

The objectives of this work are to revisit the experimental measurements on dam break flow over a dry horizontal bed and to provide a detailed insight into the dynamics of the dam break wave impacting a vertical wall downstream the dam, with emphasis on the pressure loads. The measured data are statistically analyzed and critically discussed. As a result, an extensive set of data for validation of computational tools is provided.

A bivariate return period based on copulas for hydrologic dam design: accounting for reservoir routing in risk estimation

A multivariate analysis on flood variables is needed to design some hydraulic structures like dams, as the complexity of the routing process in a reservoir requires a representation of the full hydrograph. In this work, a bivariate copula model was used to obtain the bivariate joint distribution of flood peak and volume, in order to know the probability of occurrence of a given inflow hydrograph. However, the risk of dam overtopping is given by the maximum water elevation reached during the routing process, which depends on the hydrograph variables, the reservoir volume and the spillway crest length. Consequently, an additional bivariate return period, the so-called routed return period, was defined in terms of risk of dam overtopping based on this maximum water elevation obtained after routing the inflow hydrographs. The theoretical return periods, which give the probability of occurrence of a hydrograph prior to accounting for the reservoir routing, were compared with the routed return period, as in both cases hydrographs with the same probability will draw a curve in the peak-volume space. The procedure was applied to the case study of the Santillana reservoir in Spain. Different reservoir volumes and spillway lengths were considered to investigate the influence of the dam and reservoir characteristics on the results. The methodology improves the estimation of the Design Flood Hydrograph and can be applied to assess the risk of dam overtopping

Analysis of the discharge capacity of radial-gated spillways using CFD and ANN - Oliana Dam case study.

The paper focuses on the analysis of radial-gated spillways, which is carried out by the solution of a numerical model based on the finite element method (FEM). The Oliana Dam is considered as a case study and the discharge capacity is predicted both by the application of a level-set-based free-surface solver and by the use of traditional empirical formulations. The results of the analysis are then used for training an artificial neural network to allow real-time predictions of the discharge in any situation of energy head and gate opening within the operation range of the reservoir. The comparison of the results obtained with the different methods shows that numerical models such as the FEM can be useful as a predictive tool for the analysis of the hydraulic performance of radial-gated spillways.

Dam seepage analysis based on artificial neural networks: the hysteresis phenomenon

Seepage flow measurement is an important behavior indicator when providing information about dam performance. The main objective of this study is to analyze seepage by means of an artificial neural network model. The model is trained and validated with data measured at a case study. The dam behavior towards different water level changes is reproduced by the model and a hysteresis phenomenon detected and studied. Artificial neural network models are shown to be a powerful tool for predicting and understanding seepage phenomenon.

Stability analysis of dam failures. Application to aurul tailing pond in Baia Mare (Romania)

La gestión de estériles de una explotación minera es un punto clave en el desarrollo económico de una actividad extractiva, y en especial, del entorno natural y social en el que se emplaza dicho proyecto. La minería de metales preciosos lleva asociada la construcción de balsas de residuos muy peligrosos, fruto de su proceso extractivo, como por ejemplo la cianuración en el caso del oro. Para un correcto funcionamiento de dichos emplazamientos es necesario escoger correctamente el método constructivo a partir de estudios de reconocimiento previos, como estudios de estabilidad geotécnica, contexto geológico de la zona, sismicidad, hidrología, etc. Así mismo, han de llevarse a cabo unas exhaustivas medidas de control y vigilancia para asegurar las condiciones de seguridad exigidas. La ruptura de la balsa de decantación de Aurul S.A. en Baia Mare (Rumania) el 30 de Enero del año 2000 ha sido escogido como caso de estudio de estabilidad de diques. ABSTRACT Tailing's management of a mining exploitation is a key point in the economical development of the extractive activity and, especially, of the natural and social environment of the site. Precious metals mining has high hazardous embankment construction associated, product of its extractive process, i.e. gold cyanidation. A correct operation of those sites makes necessary to choose a suitable construction method, based on previous studies as geotechnical stability studies, geological context of the area, seismicity, hydrology, etc. At the same time, exhaustive control and monitoring must be carried out in order to assure the required safety conditions. Aurul's decantation pond failure in Baia Mare (Romania), on 30th January 2000, has been chosen as a stability analysis case-study.

Design and construction of the Barriga Dam spillway through an improved wedge-shaped block technology

The Barriga Dam (Burgos, Spain) is a unique case study because its trapezoid spillway is located on the dam body and is composed of wedge-shaped concrete blocks (WSB) that include certain relevant improvements. This note summarizes the main features of the studies, the key aspects of the final design of the WSB and their placement on the dam, and important details of the spillway design. The design team concluded the study by showing the suitability of this enhanced technology for application to small dams and ponds in the short term, even with unit flows above 5 m2/s.

The Rueter-Hess Dam and Reservoir Project: A Question of Sustainable Water

Water in sufficient quantities throughout the Colorado Front Range is becoming increasingly limited. This paper examines the consequences for continued unsustainable use of water for communities of the Denver metropolitan area. This paper also looks at the effect that water law in the West has for otherwise optimum distributions of water. In addition, four regional and state water studies are reviewed for their contribution to sustainable water. Finally, the Final Environmental Impact Statement of the Rueter-Hess dam and reservoir project in Parker, Colorado is explored. Key findings conclude that the Rueter-Hess project may not, by itself, provide sustainable water for Parker; but the project will create incentive and opportunity for communities throughout the region to address the question of sustainable water.

Monitoring an earthfill dam using differential SAR interferometry: La Pedrera dam, Alicante, Spain

Surface displacement at the dykes of La Pedrera reservoir (SE Spain) has been measured by satellite differential Synthetic Aperture Radar (SAR) interferometry. At the main dyke, a displacement of about 13 cm along the satellite line of sight has been estimated between August 1995 and May 2010, from a dataset composed by ERS-1, ERS-2 and Envisat-ASAR images. Two independent short-term processing tasks were also carried out with ERS-2/Envisat-ASAR (from June 2008 to May 2010) and TerraSAR-X (from August 2008 to June 2010) images which have shown similar spatial and temporal displacement patterns. The joint analysis of historical instrument surveys and DInSAR-derived data has allowed the identification of a long-term deformation process which is reflected at the dam's surface and is also clearly recognizable in the inspection gallery. The plausible causes of the displacements measured by DInSAR are also discussed in the paper. Finally, DInSAR data have been used to compute the long-term settlement of La Pedrera dam, showing a good agreement with external studies. Consequently, this work demonstrates the integration of DInSAR with in-situ techniques which helps provide a complete spatial vision of the displacements in the dam thereby helping to differentiate the causal mechanisms.

Sandstone Dam and Reservoir municipal, agricultural and industrial water supply project, Carbon County : environmental impact statement.

Mode of access: Internet.

Walker Dam impoundment, aquatic plant control project, New Kent County : environmental impact statement.

F available only in microfiche

Dam for Flooding Logs

From the series "Scenes at L. B. Curtis & Co.'s Camp, Midland County, Michigan"