Ação do ácido trissódio-cálcio-dietileno-triaminopentaacético (CaNa3DTPA) nas lesões de isquemia-reperfusão em membro posterior de rato

OBJETIVO: Ação do ácido trissódio-cálcio-dietileno-triaminopentaacético (CaNa3DTPA), quelante de ferro com ação ainda anti-viral, antiinflamatória e imunológica, na atenuação de lesões de reperfusão em músculos esqueléticos de ratos. MÉTODOS: 52 ratos Wistar, pesando 188±22g, foram anestesiados e submetidos a semi-amputação de membro posterior direito (MPD), poupando-se o fêmur, artéria e veia femorais. Foram então randomizados e distribuídos: G1-CTAN - controle anestesia, sem cirurgia e sem isquemia; G2-CTCIR - controle cirurgia, sem isquemia; G3-IRCT e G3-IRDTPA - com isquemia (4 hora) e reperfusão ( 2 horas). O G3-IRCT foi tratado, ao final da isquemia, com cloreto de sódio 0,9% e G3-IRDTPA com (CaNa3DTPA).Parâmetros: Circunferência do pé direito e peso do rato, dosagem sérica de CPK, dosagem de malonaldeído e microscopia óptica de músculos soleus bilateral. RESULTADOS: Aumento da circunferência nos G3-IRCT e G3-IRDTPA (significante no G3-IRCT quando comparado ao G1-CTAN); CPK elevado nos G3-IRCT e G3-IRDTPA comparados aos controles; MDA mais alto no membro contralateral do G3-IRDTPA, comparado ao MPD do G3-IRDTPA e ao G1-CTAN; maior edema intersticial em G3-IRCT, maior infiltrado inflamatório em G3-IRDTPA e recuperação dos níveis de glicogênio semelhantes em G3-IRCT e G3-IRDTPA. CONCLUSÃO: Apesar do menor edema no G3-IRDTPA comparado ao G3-IRCT, o CaNa3DTPA não alterou CPK sérico, MDA muscular e morfologia muscular dos animais.

Seleção de métodos para avaliação do cobre disponível nos solos

Fez-se um estudo de seleção de métodos para cobre disponível, empregando-se trinta solos coletados na região de Jaboticabal, SP. Os solos utilizados pertencem aos seguintes grandes grupos: Solos Podzolizados de Lins e Marília, variação Lins e variação Marília, Latossolo Vermelho-Escuro fase arenosa, Latossolo Roxo, e Terra Roxa Estruturada. O cobre dos solos foi extraído através das seguintes soluções extratoras: CaCl2 0,5 M; Mg02 2,0 N; CH3COONH4 1,0 N1 pH 6,0 e pH 4,8; HCl 0,05 N e O,1 N; H2SO4 0,05 N; DTPA 0,005 M pH 7,3 e pH 6,0; EDTA 0,01 M + (NH4)2CO3 1,0 MpH 8,6; EDTA 0,02 M + CH3C0011 0,5 M + CH3COONH4 0,5 M pH 4,65 (AAAc-EDTA); e Na2EDTA 1,0%. Foi realizado ensaio em casa de vegetação, e o milho (Zea mays L.) foi empregado como planta teste. Excluindo-se o extrator CaCl2 0,5 M, todos os demais apresentaram coeficientes de correlação entre cobre extraído do solo e o absorvido pelo milho, significativos e próximos uns dos outros. Assim, com base também em parâmetros como o coeficiente de variação, o coeficiente angular e a praticidade do método, pode-se indicar um dos seguintes extratores para a avaliação do cobre disponível dos solos: DTPA 0,005 M pH 7,3, HCl 0,1 N e Na2EDTA 1,0%.

Characterization of humic-rich hydrocolloids and their metal species by means of competing ligand and metal exchange - an on-site approach

An improved on-site characterization of humic-rich hydrocolloids and their metal species in aquatic environments was the goal of the present approach. Both ligand exchange with extreme chelators ( diethylenetetraaminepentaacetic acid ( DTPA), ethylendiaminetetraacetic acid ( EDTA)) and metal exchange with strongly competitive cations (Cu(II)) were used on-site to characterize the conditional stability and availability of colloidal metal species in a humic-rich German bogwater lake ( Venner Moor, Munsterland). A mobile time-controlled tangential-flow ultrafiltration technique (cut-off: 1 kDa) was applied to differentiate operationally between colloidal metal species and free metal ions, respectively. DOC ( dissolved organic carbon) and metal determinations were carried out off-site using a home-built carbon analyzer and conventional ICP-OES ( inductively-coupled plasma-optical emission spectrometry), respectively. From the metal exchange equilibria obtained on-site the kinetic and thermodynamic stability of the original metal species ( Fe, Mn, Zn) could be characterized. Conditional exchange constants K ex obtained from aquatic metal species and competitive Cu(II) ions follow the order Mn > Zn >> Fe. Obviously, Mn and Zn bound to humic-rich hydrocolloids are very strongly competed by Cu( II) ions, in contrast to Fe which is scarcely exchangeable. The exchange of aquatic metal species (e.g. Fe) by DTPA/EDTA exhibited relatively slow kinetics but rather high metal availabilities, in contrast to their Cu(II) exchange.

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (GroBes Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.0 1 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriarnine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that > 100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content). (C) 2002 Elsevier B.V. B.V. All rights reserved.

Manganês no solo, sua avaliação e toxidez de manganês em soja

Two experiments were carried out in pots with a Dusky Latossol showing a 15% base saturation. In the first experiment dolomitic limestone was applied to reach 45, 60, 75 and 90% of base saturation. In the second, MnSO4 was applied in rates of 30, 60, 90 and 120 ppm,and base saturation was raised to 70%.Soybean plants cv. IAC-9 were grown up to R6, when dry matter production and manganese accumulation were evaluated. Soybean responded to liming up to 60% base saturation, as Mn availability and evantualy Mn absorption were decreased to non-toxic levels. Mn applied to a reclamed soil up to 120 ppm was not enough to cause toxicity to soybean cv IAC-9. All of the chemical extractors (Ammonium Acetate, DTA, Mehlich and H2SO4) showed modification in Mn availabity in soil but were not definitely related to Mn absorption and dry matter production.

Seleção de extratores químicos para avaliação da disponibilidade de zinco em solos do estado de São Paulo

The purpose of this study was to evaluate methods for predicting availability of Zn in soils. Surface soil samples representing Podzolized soils from Lins and Marilia var. Marilia and var. Lins, medium texture Dark-Red Latosol, Dusky-Red Latosol and Terra Roxa Estruturada, were gathered from fields in Jaboticabal, SP, Brazil. Com was used as indicator plant in a greenhouse experiment. Availability of Zn was determined with: 0.5 M CaCl2, 2.0 N MgCl2, N CH3COONH4 (pH 6.0 and 4.8), 0.05 and 0.1 N HCl, 0.05 N H2SO4, 0.005 M DTPA (pH 7.3 and 6.0), 1.0% Na2-EDTA, 0.01 M EDTA + 1.0 M (NH4)2CO3 (pH 8.6) and 0.02 M EDTA + 0.5 M CH3COOH + 0.5 M CH3COONH4. By using the simple correlation coefficients (Zn extracted from soils x absorbed by plants it can be concluded that the complexant agents and acid solutions showed to be efficient. The salt solutions showed low extraction capacity, low correlation coefficients and less accuracy. By considering aspects as accuracy and easy management DTPA pH 7,3 and Na2-EDTA can be indicated as the most apropriates (r values, respectively, 0.873** and 0.868** and V.C. 7.52% and 7.98%).

Reação do solo e disponibilidade de micronutrientes, em solo de textura média, tratado com lodo de esgoto e cultivado com milho

The evaluation of micronutrient availability in agricultural soil treated with sewage sludge was developed in Field with maize cultivation on a Dystrophic Red Latosol. The experiment used a randomized complete block design, with the treatments in a split-plot scheme, in time, with six doses of sewage sludge (main-plot treatment) in relation to the five sampling periods for the soil (subplot treatment), with four replications. The sewage sludge was applied in the superficial layer (0-20 cm). The micronutrients Fe, Cu, Mn and Zn were extracted from the soils using a DTPA (diethylenetriaminepentaacetic acid) solution. The same micronutrients were analyzed in the plant tissue after the nitric-perchloric decomposition of the maize samples by spectrometric atomic absorption. The results showed an increasing amount of Fe, Mn, Zn, Cu, Cation Exchange Capacity (CEC) and a decreasing pH in the soil. The increasing doses of sewage sludge increased the Fe, Mn, Cu and Zn availability in the soil solution, and the uptake amount by maize plants were always greater than the control values.

Efeito de parâmetros analíticos sobre a precisão de métodos de extração de zinco do solo

Fifteen soil samples and four extradants (DTPA, Na 2EDTA, HCl and Mehlich 1) were used to study soil extraction methods for available zinc. Each extradant was studied in three soil:solution ratios (1:2, 1:4 and 1:10) and in three extraction periods in the ratio most frequently used. The zinc extracted by DTPA, Na 2EDTA and HCl was not affected by use of soil:solution ratios 1:2 and 1:4, but the amount extracted increased with the 1:10 ratio. In this relation, the variation coefficients increased. With Mehlich, no definite tendency was observed. The increase of extraction period for DTPA extractant, in 1:2 ratio, had little effect on the amount of zinc extracted and on the precision. As to Na 2EDTA extractant in 1:10 ratio, with the increase of extraction time, both increased. As to HCl and Mehlich, both in 1:4 ratio, the increase in extraction period had no effect on the amount of zinc extracted and no definite effect on the precision. Thus, the use of 1:2 ratio for DTPA and Na 2EDTA and 1:4 ratio for acid extractants is recommended. Concerning the period of extraction, 120 min should be used with DTPA and Na 2EDTA, 15 min with HCl and 5 min with Mehlich.

Heavy metals availability and fractions in soil amended with biosolid composts

The heavy metals when linked to organic matter have a behavior in the soil that is still little known. This study aimed to evaluate the effect of sewage-sludge-based composts when incorporated in the soil, in relation to heavy metals availability. Five composts were incorporated using sugar-cane bagasse, sewage sludge and cattle manure in the respective proportions: 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 and 0-100-0 (composts with 0, 12.5, 25, 50 and 100% sewage sludge). The experiment consisted of 6 treatments (5 composts and a control with mineral fertilization) in randomized blocks with a split-plot design. The control and the treatment of 0% sewage sludge received inorganic nitrogen (N). All the treatments received the same amount of N (8.33 g) K (5.80 g) and K (8.11 g) per pot. Tomato plants were cultivated in 24.0 L pots in a greenhouse in Jaboticabal, SP, Brazil. The concentrations of heavy metals were determined in the soil samples at day 0 after compost incorporation. The higher the sewage sludge doses, the higher heavy metal contents in the soil. Among extractants, Melhlich-1 extracted the highest amount of heavy metals, while DTPA extracted the lowest one. The residual fraction presented the highest heavy metal content, followed by Fe oxides crystalline and amorphous to Cu, Cr and Mn, and Mn oxides, and Fe amorphous to Zn, indicating strong associations to oxides and clays. There were significant positive correlations between Mn contents in the plant and Mn linked to Fe oxide amorphous and crystalline.

Testing extractants for Cu, Fe, Mn, and Zn in tropical soils treated with sewage sludge for 13 consecutive years

In this paper, we report on a field experiment being carried out in a Typic Eutrorthox. The experiment was initiated in the 1997-98 agricultural season as a randomized block design with four treatments (0, 5, 10, and 20 t ha -1) of sewage sludge and five replicates. Compound soil samples were obtained from 20 subsamples collected at depths of 0-0.1 and 0.1-0.2 m. Cu, Fe, Mn, and Zn concentrations were extracted with DTPA pH 7.3; 0.1 mol L -1 HCl, Mehlich-I, Mehlich-III, and 0.01 mol L-1 CaCl 2. Metal concentrations were determined via atomic absorption spectrometry. Diagnostic leaves and the whole above-ground portion of plants were collected to determine Cu, Fe, Mn, and Zn concentrations extracted by nitric-perchloric digestion and later determined via atomic absorption spectrometry. Sewage sludge application caused increases in the concentrations of soil Cu, Fe, and Mn in samples taken from the 0-0.1 m depth evaluated by the extractants Mehlich-I, Mehlich-III, 0.01 mol L-1 HCl and DTPA pH 7.3. None of the extractants provided efficient estimates of changes in Mn concentrations. The acid extractants extracted more Cu, Fe, Mn, and Zn than the saline and chelating solutions. The highest concentrations of Cu, Fe, and Zn were obtained with Mehlich-III, while the highest concentrations of Mn were obtained with HCl. We did not observe a correlation between the extractants and the concentrations of elements in the diagnostic leaves nor in the tissues of the whole maize plant (Zea mays L.). © 2013 Springer Science+Business Media Dordrecht.

2,4-Dichlorophenoxyacetic acid (2,4-D) degradation promoted by nanoparticulate zerovalent iron (nZVI) in aerobic suspensions

Reactive species generated by Fe0 oxidation promoted by O2 (catalyzed or not by ligands) are able to degrade contaminant compounds like the herbicide 2,4-dichlorophenoxyacetic acid. The degradation of 2,4-D was influenced by the concentrations of zero valent iron (ZVI) and different ligands, as well as by pH. In the absence of ligands, the highest 2,4-D degradation rate was obtained at pH 3, while the highest percentage degradation (50%) was achieved at pH 5 after 120 min of reaction. Among the ligands studied (DTPA, EDTA, glycine, oxalate, and citrate), only ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) significantly enhanced oxidation of 2,4-D. This increase in oxidation was observed at all pH values tested (including neutral to alkaline conditions), indicating the feasibility of the technique for treatment of contaminated water. In the presence of EDTA, the oxidation rate was greater at pH 3 than at pH 5 or 7. Increasing the EDTA concentration increased the rate and percentage of 2,4-D degradation, however increasing the Fe0 concentration resulted in the opposite behavior. It was found that degradation of EDTA and 2,4-D occurred simultaneously, and that the new methodology avoided any 2,4-D removal by adsorption/coprecipitation. © 2013 Elsevier Ltd.

Formas de aplicación de zinc para las plantas de maíz que crecen en Oxisol: Efectos sobre el suelo, la nutrición de las plantas y la productividad

The way of applying zinc can influence the zinc uptake and productivity of crops, especially cereals that have high demand for this nutrient. The aim of this study is to evaluate methods of Zn application on soil, nutritional status and productivity of maize. For this, an experiment was undertaken at FCAV/UNESP, Jaboticabal-SP, in Oxisol clay (DTPA on Zn: 0.5 mg dm-3) with maize (hybrid Simple Impact), from December through May 2009. Nine treatments with three doses of Zn in soil banded application (in furrows) and three doses of Zn by incorporation in soil (0-20 cm depth), foliar application, seed application and control (no Zn). The treatments were arranged in a randomized block design with four replications. Regardless of the method, Zn application promoted higher contents of this micronutrient in soil and higher accumulation in the shoots as well as increasing Zn in the maize grain. However, it did not affect the nutritional status and yield of the maize. The Zn application in the soil resulted in a greater Zn uptake by plants and maize yield, compared to Zn application in the plant by seed or foliar.

Adubação com manganês em soja: efeitos no solo e na planta

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adsorção de cádmio e disponibilidade de cádmio e bário em latossolos sob mata nativa e cultivados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades químicas de um latossolo tratado com lodo de esgoto e efeitos na cultura do milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)