Relationship between load/unload response ratio and damage variable and its application

The physics-based parameter: load/unload response ratio (LURR) was proposed to measure the proximity of a strong earthquake, which achieved good results in earthquake prediction. As LURR can be used to describe the damage degree of the focal media qualitatively, there must be a relationship between LURR and damage variable (D) which describes damaged materials quantitatively in damage mechanics. Hence, based on damage mechanics and LURR theory, taking Weibull distribution as the probability distribution function, the relationship between LURR and D is set up and analyzed. This relationship directs LURR applied in damage analysis of materials quantitatively from being qualitative earlier, which not only provides the LURR method with a more solid basis in physics, but may also give a new approach to the damage evaluation of big scale structures and prediction of engineering catastrophic failure. Copyright (c) 2009 John Wiley & Sons, Ltd.

Relationship between load/unload response ratio and damage variable and its application

The physics-based parameter: load/unload response ratio (LURR) was proposed to measure the proximity of a strong earthquake, which achieved good results in earthquake prediction. As LURR can be used to describe the damage degree of the focal media qualitatively, there must be a relationship between LURR and damage variable (D) which describes damaged materials quantitatively in damage mechanics. Hence, based on damage mechanics and LURR theory, taking Weibull distribution as the probability distribution function, the relationship between LURR and D is set up and analyzed. This relationship directs LURR applied in damage analysis of materials quantitatively from being qualitative earlier, which not only provides the LURR method with a more solid basis in physics, but may also give a new approach to the damage evaluation of big scale structures and prediction of engineering catastrophic failure. Copyright (c) 2009 John Wiley & Sons, Ltd.

Thermally induced evolution of phase transformations in gas hydrate sediment

Thermally induced evolution of phase transformations is a basic physical-chemical process in the dissociation of gas hydrate in sediment (GHS). Heat transfer leads to the weakening of the bed soil and the simultaneous establishment of a time varying stress field accompanied by seepage of fluids and deformation of the soil. As a consequence, ground failure could occur causing engineering damage or/and environmental disaster. This paper presents a simplified analysis of the thermal process by assuming that thermal conduction can be decoupled from the flow and deformation process. It is further assumed that phase transformations take place instantaneously. Analytical and numerical results are given for several examples of simplified geometry. Experiments using Tetra-hydro-furan hydrate sediments were carried out in our laboratory to check the theory. By comparison, the theoretical, numerical and experimental results on the evolution of dissociation fronts and temperature in the sediment are found to be in good agreement.

Computer simulation of crack propagation in power electronics module solder joints

A numerical modelling method for the analysis of solder joint damage and crack propagation has been described in this paper. The method is based on the disturbed state concept. Under cyclic thermal-mechanical loading conditions, the level of damage that occurs in solder joints is assumed to be a simple monotonic scalar function of the accumulated equivalent plastic strain. The increase of damage leads to crack initiation and propagation. By tracking the evolution of the damage level in solder joints, crack propagation path and rate can be simulated using Finite Element Analysis method. The discussions are focused on issues in the implementation of the method. The technique of speeding up the simulation and the mesh dependency issues are analysed. As an example of the application of this method, crack propagation in solder joints of power electronics modules under cyclic thermal-mechanical loading conditions has been analyzed and the predicted cracked area size after 3000 loading cycles is consistent with experimental results.

Discovery of Spatial Periodicities in a Coronal Loop Using Automated Edge-Tracking Algorithms

A new method for automated coronal loop tracking, in both spatial and temporal domains, is presented. Applying this technique to TRACE data, obtained using the 171 angstrom filter on 1998 July 14, we detect a coronal loop undergoing a 270 s kink-mode oscillation, as previously found by Aschwanden et al. However, we also detect flare-induced, and previously unnoticed, spatial periodicities on a scale of 3500 km, which occur along the coronal loop edge. Furthermore, we establish a reduction in oscillatory power for these spatial periodicities of 45% over a 222 s interval. We relate the reduction in detected oscillatory power to the physical damping of these loop-top oscillations.

Unidirectional hybridization at a species' range boundary: implications for habitat tracking

Aim Introgressive hybridization between a locally rare species and a more abundant congener can drive population extinction via genetic assimilation, or the replacement of the rare species gene pool with that of the common species. To date, however, few studies have assessed the effects of such processes at the limits of species' distribution ranges. In this study, we have examined the potential for hybridization between range-edge populations of the wintergreen Pyrola minor and sympatric populations of Pyrola grandiflora. Location Qeqertarsuaq, Greenland and Churchill, Manitoba, Canada. Methods Genetic analysis of samples from Greenland and Canada was carried out using a combination of nuclear and chloroplast single nucleotide polymorphisms (SNPs). Results Analysis of nuclear SNPs confirmed hybridization in populations of morphologically intermediate individuals, as well as revealing the existence of cryptic hybrids in ostensibly morphologically pure P. minor populations. Analysis of chloroplast SNPs revealed that this hybridization is unidirectional and suggests that hybrids originate via pollen swamping of P. minor by the more common P. grandiflora. Main conclusions Extensive unidirectional hybridization may lead to the extinction of peripheral populations of P. minor where the two species grow sympatrically. Extinction could occur as a result of genetic assimilation where F1s are fertile, or via the removal of unidirectionally pollinated sterile F1s, or by a combination of these processes. This could compromise the ability of species to respond to climate change via habitat tracking, although the final outcome of these processes may ultimately depend on the rate of global climate change and its effect on the species' distributions. © 2009 Blackwell Publishing Ltd.

Tracking leatherback turtles (Dermochelys coriacea) during consecutive inter-nesting intervals: Further support for direct transmitter attachment

Over recent years there have been substantial efforts to record and interpret the post-nesting movements of leatherback turtles (Dermochelys coriacea) breeding in tropical regions. Less well documented are the movements undertaken by individual turtles during the breeding season itself, or more specifically between sequential nesting events. Such movements are of interest for two reasons: (1) gravid female leatherbacks may range extensively into the territorial waters and nesting beaches of neighbouring countries, raising questions for conservationists and population ecologists; and (2) the magnitude of movements themselves help elucidate underlying reproductive strategies (e.g. whether to rest near to the nesting or forage extensively). Here, satellite relay data loggers are used (SRDLs) to detail the movements and behaviour of two female leatherback turtles throughout three consecutive inter-nesting intervals in the Commonwealth of Dominica, West Indies. Both near-shore residence and extensive inter-nesting movements were recorded, contrasting previous studies, with movements away from the nesting beach increasing towards the end of the nesting season. Using this behavioural study as a backdrop, the suitability of attaching satellite transmitters directly to the carapace was additionally explored as an alternative approach to conventional harness deployments. Specifically, the principal aims were to (1) gather empirical data on speed of travel and (2) assess dive performance (aerobic dive limit) to enable comparisons with turtles previously fitted with harnesses elsewhere in the Caribbean (n = 6 turtles; Grenada, WI). This produced mixed results with animals bearing directly attached transmitters travelling significantly faster (55.21 km day(-1): SD 6.68) than harnessed individuals (39.80 km day(-1); SD 6.19); whilst no discernable difference in dive performance could be found between the two groups of study animals. (C) 2009 Elsevier B.V. All rights reserved.

Satellite tracking of the World's largest bony fish, the ocean sunfish (Mola mola L.) in the North East Atlantic

Satellite-linked archival transmitters were used to record the movements of three ocean sunfish (Mola mola) in the North East Atlantic. Patterns of depth use and temperature experienced by individual fish were integrated into 4-hour intervals throughout the tracking period and relayed via the Argos system. Data were recorded for 42, 90 and 54 days respectively from the three fish. The first two were tagged off southern Portugal at the end of February 2007 and travelled principally northward, while the third fish was tagged off west Ireland in August 2007 and travelled southward. These patterns are consistent with seasonal migration of ocean sunfish to high latitudes and their Subsequent return south. Maximum depths recorded by the three fish were 432 m, 472 m and 320 m respectively. All three individuals showed a diel pattern in depth use, occurring deeper during the day and shallower at night, a pattern consistent with sunfish tracking normally vertically migrating prey. Sunfish sometimes remained continuously at deeper (>200 m) depths during the day, but at other times they showed extensive movement through the water column typically travelling between their maximum depth and the surface within each 4-h period. The overall pattern to emerge was that ocean sunfish travel extensively in both horizontal and vertical dimensions, presumably in search of their patchily-distributed jellyfish prey.

Evolution of Organisational Structure and Capabilities in Internationalising Banks: The CEE Operations of UniCredit's Vienna Office

Cross-border integration is the central management issue for banks that expand internationally, and this is especially true in Central and Eastern Europe, where the pace of internationalisation through mergers and acquisitions has been rapid. A critical challenge in cross-border integration is aligning a multinational company's formal organizational structure with the distribution of capabilities across its subsidiary units, and this issue is explored by tracking the co-evolution of organizational structure and capabilities during the internationalisation of a large banking network into this region. Our focus is the Vienna head office of Bank Austria Creditanstalt, which was acquired first by HypoVereinsbank (Germany) and then UniCredit (Italy). Despite its formal role being downgraded during these changes, the unit continued to develop its distinctive capabilities. The key insight our article offers is that managing cross-border integration is not simply about recognizing the value of the distinctive capabilities of individual units and designing formal structures that successfully align with them. It is also about understanding the need for dynamic interaction between formal corporate structure and individual units' desires to retain power and influence, which have significant implications for the development of their organizational capabilities.

Migratory navigation in birds: new opportunities in an era of fast-developing tracking technology

Birds have remained the dominant model for studying the mechanisms of animal navigation for decades, with much of what has been discovered coming from laboratory studies or model systems. The miniaturisation of tracking technology in recent years now promises opportunities for studying navigation during migration itself (migratory navigation) on an unprecedented scale. Even if migration tracking studies are principally being designed for other purposes, we argue that attention to salient environmental variables during the design or analysis of a study may enable a host of navigational questions to be addressed, greatly enriching the field. We explore candidate variables in the form of a series of contrasts (e. g. land vs ocean or night vs day migration), which may vary naturally between migratory species, populations or even within the life span of a migrating individual. We discuss how these contrasts might help address questions of sensory mechanisms, spatiotemporal representational strategies and adaptive variation in navigational ability. We suggest that this comparative approach may help enrich our knowledge about the natural history of migratory navigation in birds.

Development of a novel mass spectrometric technique for studying DNA damage

An experimental system, based upon UV and IR laser desorption, has been constructed to enable the production and characterization of neutral biomolecular targets. These targets are to be used for interaction experiments investigating radiation-induced damage to DNA. The viability of the laser-desorption techniques of MALDI (matrix-assisted laser-desorption ionization), SALDI (surface-assisted laser-desorption ionization) and DIOS (desorption/ionization on silicon), for production of these gas targets is discussed in the present paper. Fluorescent dye tagging and LIF (laser-induced fluorescence) imaging has been used to characterize the biomolecular plumes, revealing their spatial density profiles and temporal evolution. © The Authors Journal compilation. © 2009 Biochemical Society.

Tracking magnetic bright point motions through the solar atmosphere

High-cadence, multiwavelength observations and simulations are employed for the analysis of solar photospheric magnetic bright points (MBPs) in the quiet Sun. The observations were obtained with the Rapid Oscillations in the Solar Atmosphere (ROSA) imager and the Interferometric Bidimensional Spectrometer at the Dunn Solar Telescope. Our analysis reveals that photospheric MBPs have an average transverse velocity of approximately 1 km s-1, whereas their chromospheric counterparts have a slightly higher average velocity of 1.4 km s-1. Additionally, chromospheric MBPs were found to be around 63 per cent larger than the equivalent photospheric MBPs. These velocity values were compared with the output of numerical simulations generated using the muram code. The simulated results were similar, but slightly elevated, when compared to the observed data. An average velocity of 1.3 km s-1 was found in the simulated G-band images and an average of 1.8 km s-1 seen in the velocity domain at a height of 500 km above the continuum formation layer. Delays in the change of velocities were also analysed. Average delays of ˜4 s between layers of the simulated data set were established and values of ˜29 s observed between G-band and Ca ii K ROSA observations. The delays in the simulations are likely to be the result of oblique granular shock waves, whereas those found in the observations are possibly the result of a semi-rigid flux tube.

Element-Free Galerkin Modelling of Crack Migration in Composite Laminates

The development of a virtual testing environment, as a cost-effective industrial design tool in the design and analysis of composite structures, requires the need to create models efficiently, as well as accelerate the analysis by reducing the number of degrees of freedom, while still satisfying the need for accurately tracking the evolution of a debond, delamination or crack front. The eventual aim is to simulate both damage initiation and propagation in components with realistic geometrical features, where crack propagation paths are not trivial. Meshless approaches, and the Element-Free Galerkin (EFG) method, are particularly suitable for problems involving changes in topology and have been successfully applied to simulate damage in homogeneous materials and concrete. In this work, the method is utilized to model initiation and mixed-mode propagation of cracks in composite laminates, and to simulate experimentally-observed crack migration which is difficult to model using standard finite element analysis. N

Picosecond metrology of laser-driven proton bursts

Tracking primary radiation-induced processes in matter requires ultrafast sources and high precision timing. While compact laser-driven ion accelerators are seeding the development of novel high instantaneous flux applications, combining the ultrashort ion and laser pulse durations with their inherent synchronicity to trace the real-time evolution of initial damage events has yet to be realized. Here we report on the absolute measurement of proton bursts as short as 3.5±0.7 ps from laser solid target interactions for this purpose. Our results verify that laser-driven ion acceleration can deliver interaction times over a factor of hundred shorter than those of state-of-the-art accelerators optimized for high instantaneous flux. Furthermore, these observations draw ion interaction physics into the field of ultrafast science, opening the opportunity for quantitative comparison with both numerical modelling and the adjacent fields of ultrafast electron and photon interactions in matter.