Advancements in jet turbulence and noise modeling: accurate one-way solutions and empirical evaluation of the nonlinear forcing of wavepackets

Jet noise reduction is an important goal within both commercial and military aviation. Although large-scale numerical simulations are now able to simultaneously compute turbulent jets and their radiated sound, lost-cost, physically-motivated models are needed to guide noise-reduction efforts. A particularly promising modeling approach centers around certain large-scale coherent structures, called wavepackets, that are observed in jets and their radiated sound. The typical approach to modeling wavepackets is to approximate them as linear modal solutions of the Euler or Navier-Stokes equations linearized about the long-time mean of the turbulent flow field. The near-field wavepackets obtained from these models show compelling agreement with those educed from experimental and simulation data for both subsonic and supersonic jets, but the acoustic radiation is severely under-predicted in the subsonic case. This thesis contributes to two aspects of these models. First, two new solution methods are developed that can be used to efficiently compute wavepackets and their acoustic radiation, reducing the computational cost of the model by more than an order of magnitude. The new techniques are spatial integration methods and constitute a well-posed, convergent alternative to the frequently used parabolized stability equations. Using concepts related to well-posed boundary conditions, the methods are formulated for general hyperbolic equations and thus have potential applications in many fields of physics and engineering. Second, the nonlinear and stochastic forcing of wavepackets is investigated with the goal of identifying and characterizing the missing dynamics responsible for the under-prediction of acoustic radiation by linear wavepacket models for subsonic jets. Specifically, we use ensembles of large-eddy-simulation flow and force data along with two data decomposition techniques to educe the actual nonlinear forcing experienced by wavepackets in a Mach 0.9 turbulent jet. Modes with high energy are extracted using proper orthogonal decomposition, while high gain modes are identified using a novel technique called empirical resolvent-mode decomposition. In contrast to the flow and acoustic fields, the forcing field is characterized by a lack of energetic coherent structures. Furthermore, the structures that do exist are largely uncorrelated with the acoustic field. Instead, the forces that most efficiently excite an acoustic response appear to take the form of random turbulent fluctuations, implying that direct feedback from nonlinear interactions amongst wavepackets is not an essential noise source mechanism. This suggests that the essential ingredients of sound generation in high Reynolds number jets are contained within the linearized Navier-Stokes operator rather than in the nonlinear forcing terms, a conclusion that has important implications for jet noise modeling.

Non-Linear Scale Interactions in a Forced Turbulent Boundary Layer

This thesis explores the dynamics of scale interactions in a turbulent boundary layer through a forcing-response type experimental study. An emphasis is placed on the analysis of triadic wavenumber interactions since the governing Navier-Stokes equations for the flow necessitate a direct coupling between triadically consist scales. Two sets of experiments were performed in which deterministic disturbances were introduced into the flow using a spatially-impulsive dynamic wall perturbation. Hotwire anemometry was employed to measure the downstream turbulent velocity and study the flow response to the external forcing. In the first set of experiments, which were based on a recent investigation of dynamic forcing effects in a turbulent boundary layer, a 2D (spanwise constant) spatio-temporal normal mode was excited in the flow; the streamwise length and time scales of the synthetic mode roughly correspond to the very-large-scale-motions (VLSM) found naturally in canonical flows. Correlation studies between the large- and small-scale velocity signals reveal an alteration of the natural phase relations between scales by the synthetic mode. In particular, a strong phase-locking or organizing effect is seen on directly coupled small-scales through triadic interactions. Having characterized the bulk influence of a single energetic mode on the flow dynamics, a second set of experiments aimed at isolating specific triadic interactions was performed. Two distinct 2D large-scale normal modes were excited in the flow, and the response at the corresponding sum and difference wavenumbers was isolated from the turbulent signals. Results from this experiment serve as an unique demonstration of direct non-linear interactions in a fully turbulent wall-bounded flow, and allow for examination of phase relationships involving specific interacting scales. A direct connection is also made to the Navier-Stokes resolvent operator framework developed in recent literature. Results and analysis from the present work offer insights into the dynamical structure of wall turbulence, and have interesting implications for design of practical turbulence manipulation or control strategies.

Electromagnetic fields and transmission properties in tapered hollow metallic waveguides

We analyze the electromagnetic spatital distributions and address an important issue of the transmission properties of spherical transverse-electric (TE) and transverse-magnetic (TM) eigenmodes within a tapered hollow metallic waveguide in detail. Explicit analytical expressions for the spatital distributions of electromagnetic field components, attenuation constant, phase constant and wave impedance are derived. Accurate eigenvalues obtained numerically are used to study the dependences of the transmission properties on the taper angle, the mode as well as the length of the waveguide. It is shown that all modes run continuously from a propagating through a transition to an evanescent region and the value of the attenuation increases as the distance from the cone vertex and the cone angle decrease. A strict distinction between pure propagating and pure evanescent modes cannot be achieved. One mode after the other reaches cutoff in the tapered hollow metallic waveguide as the distance from the cone vertex desreases. (C) 2008 Optical Society of America

Intensidade acústica útil: um novo método para identificação de regiões radiantes em superfícies com geometrias arbitrárias

Neste trabalho é descrita a teoria necessária para a obtenção da grandeza denominada intensidade supersônica, a qual tem por objetivo identificar as regiões de uma fonte de ruído que efetivamente contribuem para a potência sonora, filtrando, consequentemente, a parcela referente às ondas sonoras recirculantes e evanescentes. É apresentada a abordagem de Fourier para a obtenção da intensidade supersônica em fontes com geometrias separáveis e a formulação numérica existente para a obtenção de um equivalente à intensidade supersônica em fontes sonoras com geometrias arbitrárias. Este trabalho apresenta como principal contribuição original, uma técnica para o cálculo de um equivalente à intensidade supersônica, denominado aqui de intensidade acústica útil, capaz de identificar as regiões de uma superfície vibrante de geometria arbitrária que efetivamente contribuem para a potência sonora que será radiada. Ao contrário da formulação numérica existente, o modelo proposto é mais direto, totalmente formulado na superfície vibrante, onde a potência sonora é obtida através de um operador (uma matriz) que relaciona a potência sonora radiada com a distribuição de velocidade normal à superfície vibrante, obtida com o uso do método de elementos finitos. Tal operador, chamado aqui de operador de potência, é Hermitiano, fato crucial para a obtenção da intensidade acússtica útil, após a aplicação da decomposição em autovalores e autovetores no operador de potência, e do critério de truncamento proposto. Exemplos de aplicações da intensidade acústica útil em superfícies vibrantes com a geometria de uma placa, de um cilindro com tampas e de um silenciador automotivo são apresentados, e os resultados são comparados com os obtidos via intensidade supersônica (placa) e via técnica numérica existente (cilindro), evidenciando que a intensidade acústica útil traz, como benefício adicional, uma redução em relação ao tempo computacional quando comparada com a técnica numérica existente.

Super-resolution scanning laser microscopy with a third-order optical nonlinear thin film

In a configuration of optical far-field scanning microscopy, super-resolution achieved by inserting a third-order optical nonlinear thin film is demonstrated and analyzed in terms of the frequency response function. Without the thin film the microscopy is diffraction limited; thus, subwavelength features cannot be resolved. With the nonlinear thin film inserted, the resolution is dramatically improved and thus the microscopy resolves features significantly smaller than the smallest spacing allowed by the diffraction limit. A theoretical model is established and the device is analyzed for the frequency response function. The results show that the frequency response function exceeds the cutoff spatial frequency of the microscopy defined by the laser wavelength and the numerical aperture of the convergent lens. The main contribution to the improvement of the cutoff spatial frequency is from the phase change induced by the complex transmission of the nonlinear thin film. Experimental results are presented and are shown to be consistent with the results of theoretical simulations.

Consumo alimentar e prevalência de inadequação de ingestão de nutrientes entre gestantes, lactantes e mulheres em idade reprodutiva do Brasil

A gravidez e a lactação aumentam as necessidades nutricionais. O objetivo deste estudo foi comparar a ingestão alimentar e a prevalência de inadequação de ingestão de nutrientes entre gestantes, lactantes, mulheres em idade reprodutiva. Dois dias de registros alimentares de 322 gestantes e 751 lactantes foram comparados com 6837 mulheres não gestantes e não lactantes entre 19 a 40 anos de idade, a partir de uma amostra representativa a nível nacional. A prevalência de inadequação de ingestão de nutrientes foi estimada pelo método National Cancer Institute usando a necessidade média estimada (EAR) como ponto de corte, exceto para o sódio em que o nível de ingestão tolerável (UL) foi utilizado. Gestantes, lactantes e mulheres em idade reprodutiva não diferiram em relação ao consumo médio de 18 grupos de alimentos, exceto o arroz, que foi mais consumido pelas lactantes. A prevalência de inadequação de nutrientes em gestantes foi maior em relação às mulheres em idade reprodutiva para a vitamina B6 (59% versus 33%). Entre as lactantes prevalência foi maior para a vitamina A (95% versus 72%), vitamina C (56% versus 37%), vitamina B6 (75% vs 33%), e zinco (64% versus 20%). A porcentagem da ingestão de sódio acima do valor máximo tolerável foi superior a 70% entre as mulheres estudadas. A ingestão inadequada é muito freqüente entre todas as mulheres e aumenta durante a gravidez e lactação.

SiO2 对Bi2O3-B2O3 玻璃体系光学、热学及结构的 影响

Glasses with compositions 50Bi2O3-xB2O3- (50-x)SiO2(x=0, 10, 20, 30, 40, 50) in mol% have been prepared by using a normal melt-quench technique. The effect of SiO2 addition on thermal stability, optical properties and structural characteristic on Bi2O3-B2O3 glass were systematically investigated by using XRD, DTA, ultraviolet-visible transmittance spectra, midinfrared transmittance spectra and Raman spectra. The experimental results demonstrate that, with the addition of SiO2, thermal stability of glass samples has been obviously improved. Once the amount of SiO2 is too much, the glass samples tend to be phase seperation which results in the decrease of thermal stability. With increasing SiO2 content, the UV cutoff edge firstly shifts to short-wave band and then shifts to long-wave band, and the transmittance of mid-infrared has been greatly improved. With substitution of SiO2 for B2O3, the [BO3] triangles and [BO4] tetrahedral groups are gradually replaced by [SiO4]. [BiO6] octahedral and [SiO4] tetrahedral units are connected forming a vibrational mode of Bi-O-Si. The physical chemistry and optical performance of Bi2O3-B2O3 glass were greatly improved by addition of SiO2.

Effect of CdF2 addition on thermal stability and upconversion luminescence properties in Tm3+-Yb3+ codoped oxyfluoride silicate glasses

Tm3+-Yb3+ codoped oxyfluoride silicate glasses suitable for upconversion laser has been fabricated. In this paper, effect of CdF2 addition on thermal stability and upconversion luminescence properties in Tm3+-Yb3+ codoped oxyfluoride silicate glasses have been systematically investigated. The experimental results indicate that, with the substitution CdF2 for PbF2, the glass thermal stability increases and the UV cutoff edge moves to short-wave band slightly. With increasing CdF2 content, the blue and red upconversion luminescence intensity increases slightly at first, and then increases rapidly. While the near infrared (NIR) upconversion emission intensity increases notably at first and then increases slightly. However, the blue and NIR luminescence intensity are much stronger than that of red, indicating these oxyfluoride silicate glasses are more preferable for blue and NIR emissions than red emission. The possible upconversion mechanisms for the blue, red and NIR fluorescence are also estimated and evaluated. (c) 2006 Elsevier B.V. All rights reserved.

用光纤生物传感器检测炭疽杆菌、鼠疫杆菌及葡萄球菌肠毒素B

目的：用新研制的光纤生物传感器FOB-3检测多种病原微生物及细菌毒素.方法：利用双抗体夹心法,优化免疫反应的时间和浓度后,用FOB-3分别检测炭疽芽孢及繁殖体、鼠疫F1抗原和葡萄球菌肠毒素B.为便于结果判定,确定截断（cutoff）值,并以Ssignal与NNnoise差值的形式消除荧光信号中的噪声.结果：使用光纤生物传感器FOB-3,在20 min内可分别检测到50～1000 ng/mL的鼠疫F1抗原、0.1～100μg/mL的葡萄球菌肠毒素B、3×10^1～3×10^6 CFU/mL的炭疽杆菌繁殖体和

Growth of beta barium borate (beta-BaB2O4) thin films on alpha barium borate (alpha-BaB2O4) substrates

Crystalline beta-BBO thin films have been successfully prepared on (001)-oriented Sr2+-doped alpha-BBO substrates using liquid phase epitaxy and pulsed laser deposition techniques. The films were characterized by X-ray diffraction and X-ray rocking curve (XRC). The present results manifest that the beta-BBO thin films grown on Sr2+-doped alpha-BBO substrates have larger degree of orientation f-value and smaller XRC FWHM than the ones grown on other reported substrates. Compared with other substrates, alpha-BBO has the same UV cutoff and the similar structure to beta-BBO. These results reveal that alpha-BBO single crystal may be a promising substrate proper to the growth of beta-BBO films. (c) 2005 Elsevier B.V. All rights reserved.

Growth and spectral characterization of beta-Ga2O3 single crystals

Beta gallium oxide (beta-Ga2O3) single crystals were grown by the floating zone technique. The absorption spectra and the luminescence of the crystals were measured. The absorption spectra showed an intrinsic short cutoff edge around 260 nm with two shoulders at 270 and 300 nm. Not only the characteristic UV (395 nm), blue (471 nm) and green (559 nm) lights, but also the red (692 nm) light can be seen in the emission spectra. The deep UV light was attributed to the existing of quantum wells above the valence band and the red light was owed to the electron-hole recombination via the vicinity donors and acceptors. (c) 2006 Elsevier Ltd. All rights reserved.

在Sr～2+α_BBO单晶衬底上生长β_BBO薄膜的研究

Crystalline beta-BBO thin films were successfully prepared on (001)-oriented Sr2+-doped alpha-BBO substrates by using liquid phase epitaxy, pulsed laser deposition and vapor transport equilibration techniques. The films were characterized by X-ray diffraction and X-ray rocking curve. The present results manifest that the beta-BBO thin films grown on Sr2+-doped alpha-BBO substrates have larger degree of orientation f value and smaller X-ray rocking curve FWHM than the ones grown on other reported substrates. Compared with other substrates, alpha-BBO has the similar structure, the same UV cutoff and the same chemical properties to beta-BBO. These results reveal that Sr2+-doped alpha-BBO single crystal may be a promising substrate proper to the growth of beta-BBO films.

Investigation on microstructure and optical properties of titanium dioxide coatings annealed at various temperature

TiO2 coatings were prepared on fused silica with conventional electron beam evaporation deposition. After TiO2 thin films were annealed at different temperatures for 4 h, several properties were investigated by X-ray diffraction (XRD), spectrometer.. photoelectron spectroscopy (XPS) and AFM. It was found that with the annealing temperature increasing, the transmittance of TiO2 coatings decreased, and the cutoff wavelength shifted to long wavelength in near ultraviolet band. Especially, when coatings were annealed at high temperature, the optical loss is very serious, which can be attributed to the scattering and the absorption of TiO2 coatings. XRD patterns revealed that only anatase phase was observed in TiO2 coatings regardless of the different annealing temperatures. XPS results indicated that the fine chemical shift of TiO2 2p(1/2) should be attributed to existence of oxygen vacancies around Ti+4 ion. The investigation on surface morphology by AFM showed that the RMS of titania thin films gradually increases from less than 0.40 nm to 5.03 nm and it should be ascribed to the growth of titanium dioxide grain size with the increase of annealing temperature. (C) 2005 Elsevier B.V. All rights reserved.

Análise das dosagens do fator de crescimento endotelial vascular no plasma e fluidos peritoneais de pacientes com câncer epitelial de ovário

A carcinogênese epitelial ovariana tem sido foco de estudos científicos em todo o mundo desenvolvido. A angiogênese tumoral ovariana é um processo multifatorial que resulta em vários produtos pró-angiogênicos. Entre eles, o fator de crescimento vascular endotelial (VEGF) é predominante. Os objetivos deste estudo foram relacionar as dosagens do VEGF dos fluidos peritoneais, do plasma periférico e do infundíbulo pélvico aos níveis de citorredução em pacientes operadas de adenocarcinoma epitelial de ovário (CEO); formular um modelo probabilístico de citorredução e utilizar estas dosagens para estimar a probabilidade do desfecho de citorredução. Além disto, foi criada uma nova variável chamada carga de VEGF. Pelo procedimento step-wise a citorredução foi melhor descrita pela carga de VEGF, mas faltou Normalidade aos resíduos, não sendo possível a adequação de um modelo matemático. Porém, a curva ROC, forneceu uma área sob a curva de 0,84, com sensibilidade de 71,4 % e especificidade variando de 69,5 a 73,9%. O ponto de corte ótimo foi 15,52 log de picograma de carga de VEGF. A odds-ratio (OR) calculada para citorredução ótima descrita pela carga de VEGF foi de 11 (IC= 2,59 ; 46,78). No grupo com estágio avançado (III e IV), a OR foi de 6 (IC= 1,15; 31,22). Apesar do pequeno número de casos, esta nova variável pode vir a ser um auxiliar na determinação de situações onde cirurgia citorredutora deixa de ser a pedra fundamental do tratamento primário do CEO e a indução quimioterápica passe a ter o principal papel na citorredução química antes da cirugia nestes casos.

Níveis de TSH e sintomas depressivos em mulheres acima de 35 anos do Município do Rio de Janeiro

Alguns estudos vêm apontando o hipotireoidismo como um fator de risco para depressão; entretanto, esta associação é ainda controversa. Como objetivo o presente estudo estimou a prevalência de sintomas depressivos numa amostra probabilística de mulheres e investigou se existe uma associação entre níveis de TSH e a presença de sintomas depressivos. Conduzimos um estudo transversal de base populacional onde avaliou-se uma amostra de mulheres com 35 anos ou mais anos de idade, residentes no município do Rio de Janeiro (RJ), que foram entrevistadas e tiveram amostras de sangue coletadas. O desenho de amostra proposto para a pesquisa seguiu um modelo de amostragem probabilística por conglomerado, em três estágios de seleção, tendo por base os setores censitários do município. A função tireoidiana foi medida pelo TSH sérico, a partir das amostras coletadas no domicílio. Para avaliação da presença/ausência de sintomas depressivos utilizou-se um instrumento padronizado e validado (PRIME-MD). Foram também coletados dados sócio demográficos e outras informações de saúde da participante. A prevalência de sintomas depressivos, frequências e associações foram calculadas levando-se em conta o desenho de amostra complexo, utilizando procedimentos específicos do pacote SAS (versão 9.1). Da amostra de 1500 mulheres, 1298 foram entrevistadas, sendo o percentual de não-resposta igual a 13,5%. A amostra final foi composta por 1249 participantes, onde foi encontrada uma prevalência de sintomas depressivos igual a 45,9%. Em relação aos níveis de TSH, 4,8% da amostra apresentaram-se acima do ponto de corte adotado (≥6,0 mUl/ml). Destas, 61,9% apresentaram sintomas depressivos, contra 44,9% entre as mulheres com TSH<6,0 (p=0,04). A análise ajustada mostrou que mulheres com nível de TSH≥6,0 tiveram uma chance duas vezes maior de apresentarem sintomas depressivos do que aquelas com TSH normal (OR=2,04). Ao excluir da análise as participantes que auto-referiram diagnóstico prévio de doença tireoidiana, a associação entre níveis de TSH e sintomas depressivos perdeu a significância. Concluindo, foi observada alta prevalência de sintomas depressivos na amostra, especialmente entre o grupo com níveis elevados de TSH. Os resultados chamam atenção para a importância de se investigar em pacientes deprimidos a comorbidade tireoidiana.