Hybrid time dependent/independent solution for the He i line ratio temperature and density diagnostic for a thermal helium beam with applications in the scrape-off layer-edge regions in tokamaks

Spectroscopic studies of line emission intensities and ratios offer an attractive option in the\r\ndevelopment of non-invasive plasma diagnostics. Evaluating ratios of selected He I line\r\nemission profiles from the singlet and triplet neutral helium spin systems allows for simultaneous\r\nmeasurement of electron density (ne) and temperature (Te) profiles. Typically, this powerful\r\ndiagnostic tool is limited by the relatively long relaxation times of the 3S metastable term of helium\r\nthat populates the triplet spin system, and on which electron temperature sensitive lines are based.\r\nBy developing a time dependent analytical solution, we model the time evolution of the two spin\r\nsystems. We present a hybrid time dependent/independent line ratio solution that improves the\r\nrange of application of this diagnostic technique in the scrape-off layer (SOL) and edge plasma\r\nregions when comparing it against the current equilibrium line ratio helium model used at\r\nTEXTOR.

Development and current use of parenteral nutrition in critical care - an opinion paper.

Critically ill patients depend on artificial nutrition for the maintenance of their metabolic functions and lean body mass, as well as for limiting underfeeding-related complications. Current guidelines recommend enteral nutrition (EN), possibly within the first 48 hours, as the best way to provide the nutrients and prevent infections. EN may be difficult to realize or may be contraindicated in some patients, such as those presenting anatomic intestinal continuity problems or splanchnic ischemia. A series of contradictory trials regarding the best route and timing for feeding have left the medical community with great uncertainty regarding the place of parenteral nutrition (PN) in critically ill patients. Many of the deleterious effects attributed to PN result from inadequate indications, or from overfeeding. The latter is due firstly to the easier delivery of nutrients by PN compared with EN increasing the risk of overfeeding, and secondly to the use of approximate energy targets, generally based on predictive equations: these equations are static and inaccurate in about 70% of patients. Such high uncertainty about requirements compromises attempts at conducting nutrition trials without indirect calorimetry support because the results cannot be trusted; indeed, both underfeeding and overfeeding are equally deleterious. An individualized therapy is required. A pragmatic approach to feeding is proposed: at first to attempt EN whenever and as early as possible, then to use indirect calorimetry if available, and to monitor delivery and response to feeding, and finally to consider the option of combining EN with PN in case of insufficient EN from day 4 onwards.

Imagerie à haut contraste et caractérisation d'exoplanètes par la spectroscopie intégrale de champ

Cette thèse porte sur l’amélioration des techniques d’imagerie à haut-contraste permettant la détection directe de compagnons à de faibles séparations de leur étoile hôte. Plus précisément, elle s’inscrit dans le développement du Gemini Planet Imager (GPI) qui est un instrument de deuxième génération pour les télescopes Gemini. Cette caméra utilisera un spectromètre à champ intégral (SCI) pour caractériser les compagnons détectés et pour réduire le bruit de tavelure limitant leur détection et corrigera la turbulence atmosphérique à un niveau encore jamais atteint en utilisant deux miroirs déformables dans son système d’optique adaptative (OA) : le woofer et le tweeter. Le woofer corrigera les aberrations de basses fréquences spatiales et de grandes amplitudes alors que le tweeter compensera les aberrations de plus hautes fréquences ayant une plus faible amplitude. Dans un premier temps, les performances pouvant être atteintes à l’aide des SCIs présentement en fonction sur les télescopes de 8-10 m sont investiguées en observant le compagnon de l’étoile GQ Lup à l’aide du SCI NIFS et du système OA ALTAIR installés sur le télescope Gemini Nord. La technique de l’imagerie différentielle angulaire (IDA) est utilisée pour atténuer le bruit de tavelure d’un facteur 2 à 6. Les spectres obtenus en bandes JHK ont été utilisés pour contraindre la masse du compagnon par comparaison avec les prédictions des modèles atmosphériques et évolutifs à 8−60 MJup, où MJup représente la masse de Jupiter. Ainsi, il est déterminé qu’il s’agit plus probablement d’une naine brune que d’une planète. Comme les SCIs présentement en fonction sont des caméras polyvalentes pouvant être utilisées pour plusieurs domaines de l’astrophysique, leur conception n’a pas été optimisée pour l’imagerie à haut-contraste. Ainsi, la deuxième étape de cette thèse a consisté à concevoir et tester en laboratoire un prototype de SCI optimisé pour cette tâche. Quatre algorithmes de suppression du bruit de tavelure ont été testés sur les données obtenues : la simple différence, la double différence, la déconvolution spectrale ainsi qu’un nouvel algorithme développé au sein de cette thèse baptisé l’algorithme des spectres jumeaux. Nous trouvons que l’algorithme des spectres jumeaux est le plus performant pour les deux types de compagnons testés : les compagnons méthaniques et non-méthaniques. Le rapport signal-sur-bruit de la détection a été amélioré d’un facteur allant jusqu’à 14 pour un compagnon méthanique et d’un facteur 2 pour un compagnon non-méthanique. Dernièrement, nous nous intéressons à certains problèmes liés à la séparation de la commande entre deux miroirs déformables dans le système OA de GPI. Nous présentons tout d’abord une méthode utilisant des calculs analytiques et des simulations Monte Carlo pour déterminer les paramètres clés du woofer tels que son diamètre, son nombre d’éléments actifs et leur course qui ont ensuite eu des répercussions sur le design général de l’instrument. Ensuite, le système étudié utilisant un reconstructeur de Fourier, nous proposons de séparer la commande entre les deux miroirs dans l’espace de Fourier et de limiter les modes transférés au woofer à ceux qu’il peut précisément reproduire. Dans le contexte de GPI, ceci permet de remplacer deux matrices de 1600×69 éléments nécessaires pour une séparation “classique” de la commande par une seule de 45×69 composantes et ainsi d’utiliser un processeur prêt à être utilisé plutôt qu’une architecture informatique plus complexe.

Estudi dels carotenoides en espècies marrons de bacteris verds del sofre: diversitat, eco-fisiologia i regulació

El present treball es centra en l'estudi a diferents nivells dels carotenoides de les espècies marrons de Bacteris Verds del Sofre (GSB, de l'anglès Green Sulfur Bacteria). L'objectiu global ha estat el d'esbrinar quina és la funció d'aquests pigments dins l'aparell fotosintètic d'aquests microorganismes i aprofundir en el coneixement de la seva estructura i interaccions amb els altres pigments de l'aparell fotosintètic. En primer lloc es va dissenyar un nou mètode de cromatografia líquida d'alta resolució (HPLC) per analitzar de manera més ràpida i precisa els carotenoides de diferents soques de GSB (Capítol 3). Aquest mètode es basa en una purificació prèvia dels extractes pigmentaris amb columnes d'alúmina per eliminar les bacterioclorofil·les (BCls). Això va permetre analitzar amb una elevada resolució i en tan sols 45 min de carrera cromatogràfica els diferents carotenoides i els seus precursors, així com les configuracions trans i cis dels seus isòmers. El segon mètode utilitzat va consistir en una modificació del mètode de Borrego i Garcia-Gil (1994) i va permetre la separació precisa de tot tipus de pigments, procedents tant de cultius purs com de mostres de caràcter complex. Un exemple concret foren uns paleosediments de la zona lacustre de Banyoles. En aquests sediments (0,7-1,5 milions d'anys d'antiguitat) es van detectar, entre d'altres pigments, carotenoides específics de les espècies marrons de GSB, la qual cosa va permetre confirmar la presència d'aquests bacteris a la zona lacustre de Banyoles ja des del Pleistocè inferior. En aquest primer capítol també es van analitzar els carotenoides de Chlorobium (Chl.) phaeobacteroides CL1401 mitjançant cromatografia líquida acoblada a espectrometria de masses (LC-MS/MS), amb l'objectiu de confirmar la seva identificació i el seu pes molecular. A més, també es va avaluar l'efecte de la temperatura, la llum i diferents agents oxidants i reductors en la composició quantitativa i qualitativa dels carotenoides i les BCls d'aquesta espècie. Això va permetre confirmar el caràcter fotosensible de les BCls i que els isòmers trans/cis dels diferents carotenoides no són artefactes produïts durant la manipulació de les mostres, sinó que són constitutius de l'aparell fotosintètic d'aquests microorganismes. El Capítol 4 inclou els experiments de fisiologia duts a terme amb algunes espècies de GSB, a partir dels quals es va intentar esbrinar la dinàmica de síntesi dels diferents pigments de l'aparell fotosintètic (BCl antena, BCl a i carotenoides) durant el creixement d'aquestes espècies. Aquestes investigacions van permetre monitoritzar també els canvis en el nombre de centres de reacció (CR) durant el procés d'adaptació lumínica. La determinació experimental del nombre de CR es va realitzar a partir de la quantificació de la BCl663, l'acceptor primari en la cadena de transport d'electrons dels GSB. L'estimació del nombre de CR/clorosoma es va realitzar tant a partir de dades estequiomètriques i biomètriques presents a la bibliografia, com a partir de les dades experimentals obtingudes en el present treball. El bon ajust obtingut entre les diferents estimacions va donar solidesa al valor estequiomètric calculat, que fou, com a promig, d'uns 70 CR per clorosoma. En aquest capítol de fisiologia també es van estudiar les variacions en les relacions trans/cis pels principals carotenoides de les espècies marrons de GSB. Aquestes es van determinar a partir de cultius purs de laboratori i de poblacions naturals de GSB. Pel que fa als valors trobats en cultius de laboratori no es van observar diferències destacades entre el valor calculat a alta intensitat de llum i el calculat a baixa intensitat, essent en ambdós casos proper a 2. En els clorosomes aïllats de diferents soques marrons aquest quocient prengué un valor similar tant pels isòmers de l'isorenieratè (Isr) com pels del -isorenieratè (-Isr). En poblacions naturals de Chl. phaeobacteroides aquesta relació va ser també de 2 isòmers trans per cada isòmer cis, mantenint-se constant tant en fondària com al llarg del temps. Finalment, en el Capítol 5 es presenta un marcador molecular que permet la identificació específica d'espècies marrons de GSB. Malgrat que inicialment aquest marcador fou dissenyat a partir d'un gen implicat en la síntesi de carotenoides (crtY, el qual codifica per a una licopè ciclasa) la seqüència final a partir de la qual s'han aconseguit els encebadors selectius està relacionada amb la família de proteïnes de les Policètid-ceto-sintases (PKT). Tot i així, l'eina dissenyada pot ser de gran utilitat per a la discriminació d'espècies marrons de GSB respecte les verdes en poblacions mixtes com les que es troben en ambients naturals i obre la porta a futurs experiments d'ecologia microbiana utilitzant tècniques com la PCR en temps real, que permetria la monitorització selectiva de les poblacions d'espècies marrons de GSB en ecosistemes naturals.

Avian mortalities due to transmission line collisions: a review of current estimates and field methods with an emphasis on applications to the Canadian electric network

Birds are vulnerable to collisions with human-made fixed structures. Despite ongoing development and increases in infrastructure, we have few estimates of the magnitude of collision mortality. We reviewed the existing literature on avian mortality associated with transmission lines and derived an initial estimate for Canada. Estimating mortality from collisions with power lines is challenging due to the lack of studies, especially from sites within Canada, and due to uncertainty about the magnitude of detection biases. Detection of bird collisions with transmission lines varies due to habitat type, species size, and scavenging rates. In addition, birds can be crippled by the impact and subsequently die, although crippling rates are poorly known and rarely incorporated into estimates. We used existing data to derive a range of estimates of avian mortality associated with collisions with transmission lines in Canada by incorporating detection, scavenging, and crippling biases. There are 231,966 km of transmission lines across Canada, mostly in the boreal forest. Mortality estimates ranged from 1 million to 229.5 million birds per year, depending on the bias corrections applied. We consider our most realistic estimate, taking into account variation in risk across Canada, to range from 2.5 million to 25.6 million birds killed per year. Data from multiple studies across Canada and the northern U.S. indicate that the most vulnerable bird groups are (1) waterfowl, (2) grebes, (3) shorebirds, and (4) cranes, which is consistent with other studies. Populations of several groups that are vulnerable to collisions are increasing across Canada (e.g., waterfowl, raptors), which suggests that collision mortality, at current levels, is not limiting population growth. However, there may be impacts on other declining species, such as shorebirds and some species at risk, including Alberta’s Trumpeter Swans (Cygnus buccinator) and western Canada’s endangered Whooping Cranes (Grus americana). Collisions may be more common during migration, which underscores the need to understand impacts across the annual cycle. We emphasize that these estimates are preliminary, especially considering the absence of Canadian studies.

Lack of effect of dietary n-6 : n-3 PUFA ratio on plasma lipids and markers of insulin responses in Indian Asians living in the UK

Background: Indian Asians living in Western Countries have an over 50% increased risk of coronary heart disease (CHD) relative to their Caucasians counterparts. The atherogenic lipoprotein phenotype (ALP), which is more prevalent in this ethnic group, may in part explain the increased risk. A low dietary long chain n-3 fatty acid (LC n-3 PUFA) intake and a high dietary n-6 PUFA intake and n-6:n-3 PUFA ratio in Indian Asians have been proposed as contributors to the increased ALP incidence and CHD risk in this subgroup. Aim: To examine the impact of dietary n-6:n-3 PUFA ratio on membrane fatty acid composition, blood lipid levels and markers of insulin sensitivity in Indian Asians living in the UK. Methods: Twenty-nine males were assigned to either a moderate or high n-6:n-3 PUFA (9 or 16) diet for 6 weeks. Fasting blood samples were collected at baseline and 6 weeks for analysis of triglycerides, total-, LDL- and HDL- cholesterol, non-esterified fatty acids, glucose, insulin, markers of insulin sensitivity and C-reactive protein. Results: Group mean saturated fatty acid, MUFA, n-6 PUFA and n-3 PUFA on the moderate and high n-6:n-3 PUFA diets were 26 g/d, 43 g/d, 15 g/d, 2 g/d and 25 g/d, 25 g/d, 28 g/d, 2 g/d respectively. A significantly lower total membrane n-3 PUFA and a trend towards lower EPA and DHA levels were observed following the high n-6:n-3 PUFA diet. However no significant effect of treatment on plasma lipids was evident. There was a trend towards a loss of insulin sensitivity on the high n-6:n-3 PUFA diet, with the increase in fasting insulin (P = 0.04) and HOMA IR [(insulin x glucose)/22.5] (P = 0.02) reaching significance. Conclusion: The results of the current study suggest that, within the context of a western diet, it is unlikely that dietary n-6:n-3 PUFA ratio has any major impact on the levels of LC n-3 PUFA in membrane phospholipids or have any major clinically relevant impact on insulin sensitivity and its associated dyslipidaemia.

Analysis of phosphorus use efficiency traits in Coffea genotypes reveals Coffea arabica and Coffea canephora have contrasting phosphorus uptake and utilization efficiencies

Background and Aims: Phosphate (Pi) is one of the most limiting nutrients for agricultural production in Brazilian soils due to low soil Pi concentrations and rapid fixation of fertilizer Pi by adsorption to oxidic minerals and/or precipitation by iron and aluminum ions. The objectives of this study were to quantify phosphorus (P) uptake and use efficiency in cultivars of the species Coffea arabica L. and Coffea canephora L., and group them in terms of efficiency and response to Pi availability. Methods: Plants of 21 cultivars of C. arabica and four cultivars of C. canephora were grown under contrasting soil Pi availabilities. Biomass accumulation, tissue P concentration and accumulation and efficiency indices for P use were measured. Key Results: Coffee plant growth was significantly reduced under low Pi availability, and P concentration was higher in cultivars of C. canephora. The young leaves accumulated more P than any other tissue. The cultivars of C. canephora had a higher root/shoot ratio and were significantly more efficient in P uptake, while the cultivars of C. arabica were more efficient in P utilization. Agronomic P use efficiency varied among coffee cultivars and E16 Shoa, E22 Sidamo, Iêmen and Acaiá cultivars were classified as the most efficient and responsive to Pi supply. A positive correlation between P uptake efficiency and root to shoot ratio was observed across all cultivars at low Pi supply. These data identify Coffea genotypes better adapted to low soil Pi availabilities, and the traits that contribute to improved P uptake and use efficiency. These data could be used to select current genotypes with improved P uptake or utilization efficiencies for use on soils with low Pi availability and also provide potential breeding material and targets for breeding new cultivars better adapted to the low Pi status of Brazilian soils. This could ultimately reduce the use of Pi fertilizers in tropical soils, and contribute to more sustainable coffee production.

A generalised background correction algorithm for a Halo Doppler lidar and its application to data from Finland

Current commercially available Doppler lidars provide an economical and robust solution for measuring vertical and horizontal wind velocities, together with the ability to provide co- and cross-polarised backscatter profiles. The high temporal resolution of these instruments allows turbulent properties to be obtained from studying the variation in radial velocities. However, the instrument specifications mean that certain characteristics, especially the background noise behaviour, become a limiting factor for the instrument sensitivity in regions where the aerosol load is low. Turbulent calculations require an accurate estimate of the contribution from velocity uncertainty estimates, which are directly related to the signal-to-noise ratio. Any bias in the signal-to-noise ratio will propagate through as a bias in turbulent properties. In this paper we present a method to correct for artefacts in the background noise behaviour of commercially available Doppler lidars and reduce the signal-to-noise ratio threshold used to discriminate between noise, and cloud or aerosol signals. We show that, for Doppler lidars operating continuously at a number of locations in Finland, the data availability can be increased by as much as 50 % after performing this background correction and subsequent reduction in the threshold. The reduction in bias also greatly improves subsequent calculations of turbulent properties in weak signal regimes.

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.

Dietary n-6/n-3 LC-PUFA ratio, temperature and time interactions on nutrients and fatty acids digestibility in Atlantic salmon

The objective of the present study was to evaluate the effects of altered dietary n-3/n-6 LC-PUFA ratio, adaptation to diet over time, different water temperatures, and their interactions on nutrients and fatty acids digestibility in juvenile Atlantic salmon. Three experimental diets were formulated to be identical, with the only exception of the ratio of eicosapentaenoic acid (EPA, 20:5n-3) to arachidonic acid (ARA, 20:4n-6), and fed to triplicate groups of juvenile Atlantic salmon (Salmo salar) of 55. g initial body weight. Fish were reared in a fully controlled recirculating aquaculture system, fed to apparent satiety twice daily and kept at 10. °C and for an initial period of 100. days, and faeces were collected for digestibility estimation. Then, half of the fish of each experimental tank were moved to a separate system, where the water temperature was gradually increased up to 20. °C. Fish were maintained in the two systems for an additional period of 50. days, and faeces were collected for digestibility estimation from both groups of fish at the two water temperatures. This study concluded that dietary treatments and time had only minor effects, whereas environmental temperature resulted in modified digestibility values, with increased nutrient digestibility with increasing temperature. Varying EPA/ARA ratio in the diet had only minor direct effects on digestibility, with no direct effect on overall nutrients digestibility, and fundamentally only statistically significant effects in the fatty acid digestibility of EPA and ARA themselves. Because of current increasing pressure for more efficient fish oil replacement strategies, increasing interest in dietary ARA in aquafeed and increasing relevance and occurrence of sub-optimal rearing temperature in commercial aquaculture, this study can be considered to be important as it provided a series of fundamental information, which are envisaged to be useful towards addressing these constraints and possible nutritional remedial strategies.

Supplier integrity due diligence in public procurement: limiting the criminal risk to Australia

The potential for criminals and terrorism financiers to secure lucrativegovernment contracts poses a risk to Australia’s anti-money laundering,anti-corruption and counter-terrorism financing objectives. This articlecompares the customer due diligence measures that banks are required to implement to prevent money laundering and terrorism financing with the general supplier due diligence practices and processes of key Australian government departments and agencies. It identifies various weaknesses in current procurement practices relating to standard contracts and argues that these render Australian public procurement vulnerable to criminal abuse, threaten compliance with its sanctions regime and potentially undermine the crime combating objectives of its money laundering and terrorism financinglaws. The article recommends that the national interest calls for awhole-of-government approach to improve supplier due diligence in public procurement.

Towards the optimization of performance of Atlantic salmon reared at different water temperatures via the manipulation of dietary ARA/EPA ratio

In recent years, aquaculture has been facing a series of new issues, including the necessary replacement of fish oil and fish meal because of their limited supply and sub-optimal water temperature conditions. Higher water temperatures are increasingly encountered as the result of climate change related phenomena and/or the practice of farming of species in areas with environmental characteristics outside their optimal physiological range, such as the case of Atlantic salmon (. Salmo salar) farming in Australia during the summer season. Previous studies in teleost fish have shown that when fish are exposed at higher environmental temperatures, fish had a preferential increased dietary intake for arachidonic acid (20:4n - 6, ARA). This observation suggests that, given the several metabolic roles of ARA, its dietary provision may play an important role in fish for adapting at sub-optimal high water temperatures. The objective of this study was therefore to evaluate the effects of different dietary ARA/EPA ratios in juvenile Atlantic salmon as affected by time of exposition to the diet and water temperatures, with particular focus to fish performance and possible resulting modifications of tissue fatty acid composition. The study showed that independently from dietary treatments, fish held at the higher temperatures had an increased ARA accumulation, primarily in the liver and this ARA accumulation increased over time. It was also shown that the combined dietary inclusion of ARA and EPA significantly improved fish performance, compared with diets either richer in ARA or EPA. A general trend toward higher content of n - 3 LC-PUFA at lower temperatures was also quite clear, especially in the liver. Therefore, and assuming that the trends in tissue fatty acid composition could be taken as a clue of the optimal fatty acid requirements of fish, the n - 6 requirement (and in particular ARA) clearly appears to be greater for Atlantic salmon raised at high water temperatures. Protein accumulation was higher in the diet with the combined dietary inclusion of ARA and EPA for fish held at high water temperature (20. °C), with a concomitant lipid reduction. This study shows the importance of dietary ARA for maximal growth in Atlantic salmon, particularly during the period of the year when high water temperatures are often encountered. Further studies specifically looking at optimal dietary ARA/EPA ratio and roles of ARA on myogenesis, stress physiology and immune status of cultured fish are warranted. Statement of relevance: Given the current high level of fish oil replacement in aquafeed, and the often encountered sub-optimal environmental temperatures, we believe that this study could be considered as timely and highly pertinent for the aquaculture industry and associated R&D sector.

The influence of area/volume ratio on microstructure and non-Ohmic properties of SnO2-based varistor ceramic blocks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative electrical behavior at low and high current of SnO(2)- and ZnO-based varistors

The complete I-V characteristics of SnO(2)-based varistors, particularly of the Pianaro system SCNCr consisting in 98.9%SnO(2)+1%CoO+0.05%Nb(2)O(5)+0.05%Cr(2)O(3), all in mol%, have been seldom reported in the literature. A comparative study at low and high currents of the nonohmic behavior of SCNCr- and ZnO-based varistors (modified Matsuoka system) is proposed in this work. The SCNCr system showed higher nonlinearity coefficients in the whole range of measured current. The electrical breakdown field (E(b)) was twice as high for the SCNCr system (5400 V/cm) than for the ZnO varistor (2600 V/cm) due to a smaller average grain size of the former (4.5 mu m) with respect to the latter (8.5 mu m). Nevertheless, we consider that another important factor responsible for the high E(b) in the SCNCr system is the great number of electrically active interfaces (85%) as determined with electrostatic force microscopy (EFM). It was also established that the SCNCr system might be produced in disks of smaller dimensions than that of commercial ZnO-based product, with a 5.0 cm(-1) minimal area-volume (A/V) ratio. The SCNCr reached the saturation current in a short time because of the high resistivity of the grains, which is five times higher than that of the grains in ZnO-based varistors.

Model for electrodes' filaments of hot cathode fluorescent lamps, during preheating with constant rms current

This paper presents a new model for the representation of electrodes' filaments of hot-cathode fluorescent lamps, during preheating processes based on the injection of currents with constant root mean square (rms) values. The main improvement obtained with this model is the prediction of the R-h/R-c ratio during the preheating process, as a function of the preheating time and of the rms current injected in the electrodes. Using the proposed model, it is possible to obtain an estimate of the time interval and the current that should be provided by the electronic ballast, in order to ensure a suitable preheating process. is estimate of time and current can be used as input data in the design of electronic ballasts with programmed lamp start, permitting the prediction of the R-h/R-c ratio during the initial steps of the design (theoretical analysis and digital simulation). Therefore, the use of the proposed model permits to reduce the necessity of several empirical adjustments in the prototype, in order to set the operation of electronic ballasts during the preheating process. This fact reduces time and costs associated to the global design procedure of electronic ballasts.