Analytical Assessment of a Home Made Capillary Electrophoresis Equipment with Linear Charge Coupled Device for Visible Light Absorption Detection in the Determination of Food Dyes

The performance of modular home made capillary electrophoresis equipment with spectrophotometric detection, at a visible region by means of a miniaturized linear charge coupled device, was evaluated for the determination of four food dyes. This system presents a simple but efficient home made cell detection scheme. A computer program that converts the spectral data after each run into the electropherograms was developed to evaluate the analytical parameters. The dyes selected for analytical evaluation of the system were Brilliant Blue FCF, Fast Green FCF, Sunset Yellow FCF, and Amaranth. Separation was carried out in a 29cm length and 75 mu m I.D fused silica capillary, using 10mmolL-1 borate buffer at pH 9, with separation voltage of 7.5kV. The detection limits for the dyes were between 0.3 and 1.5mgL-1 and the method presented adequate linearity over the ranges studied, with correlation coefficients greater than 0.99. The method was applied for determination and quantification of these dyes in fruit juices and candies.

Welding Equipment at the New York Trade School

Pictured is a P & H A.C. Arc Welder that would have been used to teach students in the Welding Department at the New York Trade School. Black and white photograph.

Load balancing solution and evaluation of F5 content switch equipment

The Thesis focused on hardware based Load balancing solution of web traffic through a load balancer F5 content switch. In this project, the implemented scenario for distributing HTTPtraffic load is based on different CPU usages (processing speed) of multiple member servers.Two widely used load balancing algorithms Round Robin (RR) and Ratio model (weighted Round Robin) are implemented through F5 load balancer. For evaluating the performance of F5 content switch, some experimental tests has been taken on implemented scenarios using RR and Ratio model load balancing algorithms. The performance is examined in terms of throughput (bits/sec) and Response time of member servers in a load balancing pool. From these experiments we have observed that Ratio Model load balancing algorithm is most suitable in the environment of load balancing servers with different CPU usages as it allows assigning the weight according to CPU usage both in static and dynamic load balancing of servers.

Field report from sediment coring in peat for landscape analysis in Hjaltadalur, Skagafjörður, north Iceland 2010 : Sediment drilling in Hólar, Vidvik and Kolkuós, Hjaltadalur

This field report presents fieldwork undertaken in Hjaltadalur, Skagafjördur, northern Iceland during summer 2010. The main aim was to initiate coring in selected mires in order to determine the composition of organic material and sediments in the mires, sub-sample for sedimentological and palaeoecological analyses, and initiate advanced landscape analysis of Hjaltadalur. Three mires were selected for sediments coring in Hjaltadalur: Ástunga close to Kolkóus, Hólakot at Viðvik, and Hólar. All three represented a landscape transect in NW to SE direction, from close to the coast to valley interior, i.e. close to the old settlement at Hólar.

The equipping inclusion studies : assistive technology use and outcomes in Victoria ; key findings and policy implications, study 1 - the equipment study, study 2 - the economic study

Approximately one in five of the Australian population lives with disability (AIHW 2006a; ABS 2003). Of these, almost 1.9 million rely on assistive technologies to live independently (Hobbs, Close, Downing, Reynolds & Walker 2009).

Assistive Technology (AT) is defined as,

‘any device, system or design, whether acquired commercially or off the shelf, modified or customised, that allows an individual to perform a task that they would otherwise be unable to do, or increase the ease and safety with which a task can be performed’ (Independent Living Centres Australia n.d).

‘Assistive Technology solutions’ have been defined as entailing a combination of devices (aids and equipment), environmental modifications (both in the home and outside of it), and personal care (paid and unpaid) (Assistive Technology Collaboration n.d).

Despite a large number of Australians relying on AT, there is little data available about life for these Australians, the extent of AT use, or unmet need for AT. Existing research in Australia suggests that aids and equipment provision in Australia is ‘fragmented’ across a plethora of government and non government programs (AIHW 2006a:35). In Victoria, one of the prime sources of government funding for AT is the Victorian Aids and Equipment Program (VAEP) which is a subsidy program for the purchase of aids and equipment, home and vehicle modifications for people with permanent or long term disability. Recent research suggests that waiting times for accessing equipment through the VAEP are high, as is the cost burden to applicants (Wilson, Wong & Goodridge 2006). In addition, there appears to be a substantial level of unmet need (KPMG 2007).

Additionally, there is a paucity of literature around the economic evaluation of AT interventions and solution packages, resulting in little evidence of their cost-effectiveness credentials.

A haemodialysis exercise program using novel exercise equipment

This study explored whether an exercise programme for haemodialysis patients, including the use of a purpose built dialysis exercise machine, would improve quality of life (QoL), nutrition, physical function and biochemical indices. QoL, and biochemical indices were measured at 6 months and nutrition was measured at 12 months. Physical function was measured at 4, 8 and 12 months. Results showed improvement in physical function tests a decrease in serum phosphate. The QoL health and physical functioning domain improved also. Conclusions The development of a structured exercise programme can improve quality of life, physical functioning, PO4 levels and urea clearances of dialysis patients.