Comparative study of oestrogenic properties of eight phytoestrogens in MCF7 human breast cancer cells

Previous studies have compared the oestrogenic properties of phytoestrogens in a wide variety of disparate assays. Since not all phytoestrogens have been tested in each assay, this makes inter-study comparisons and ranking oestrogenic potency difficult. In this report, we have compared the oestrogen agonist and antagonist activity of eight phytoestrogens (genistein, daidzein, equol, miroestrol, deoxymiroestrol, 8-prenylnaringenin, coumestrol and resveratrol) in a range of assays all based within the same receptor and cellular context of the MCF7 human breast cancer cell line. The relative binding of each phytoestrogen to oestrogen receptor (ER) of MCF7 cytosol was calculated from the molar excess needed for 50 % inhibition of [H-3]oestradiol binding (IC50), and was in the order coumestrol (35x)/8-prenylnaringenin (45 x)/deoxymiroestrol (50 x) > miroestrol (260x) > genistein (1000x) > equol (4000x) > daidzein (not achieved: 40 % inhibition at 10(4)-fold molar excess) > resveratrol (not achieved: 10 % inhibition at 10(5)-fold molar excess). For cell-based assays, the rank order of potency (estimated in terms of the concentration needed to achieve a response equivalent to 50 % of that found with 17 beta-oestradiol (IC50)) remained very similar for all the assays whether measuring ligand ability to induce a stably transfected oestrogen-responsive ERE-CAT reporter gene, cell growth in terms of proliferation rate after 7 days or cell growth in terms of saturation density after 14 days. The IC50 values for these three assays in order were for 17 beta-oestradiol (1 x 10-(11) M, 1 x 10-(11) M, 2 x 10(-11) M), and in rank order of potency for the phytoestrogens, deoxymiroestrol (1 x 10(-10) M, 3 x 10(-11) M, 2 x 10(-11) M) > miroestrol (3 x 10(-10) M, 2 x 10(-11) M, 8 x 10(-11) M) > 8-prenylnaringenin (1 x 10(-9) M, 3 x 10(-10) M, 3 x 10(-10) M) > cournestrol (3 x 10(-8) M, 2 x 10(-8) M, 3 x 10(-8) M) > genistein (4 x 10(-8) M, 2 x 10(-8) M, 1 x 10(-8) M)/equol (1 x 10(-7) M, 3 x 10(-8) M, 2 x 10(-8) M) > daidzein (3 x 10(-7) M, 2 x 10(-7) M, 4 x 10(-8) M) > resveratrol (4 x 10(-6) M, not achieved, not achieved). Despite using the same receptor context of the MCF7 cells, this rank order differed from that determined from receptor binding. The most marked difference was for cournestrol and 8-prenylnaringenin which both displayed a relatively potent ability to displace [3H]oestradiol from cytosolic ER compared with their much lower activity in the cell-based assays. Albeit at varying concentrations, seven of the eight phytoestrogens (all except resveratrol) gave similar maximal responses to that given by 17 beta-oestradiol in cell-based assays which makes them full oestrogen agonists. We found no evidence for any oestrogen antagonist action of any of these phytoestrogens at concentrations of up to 10(-6) M on either reporter gene induction or on stimulation of cell growth. (c) 2005 Elsevier Ltd. All rights reserved.

Comparative study of the performance of the M-cycle counter-flow and cross-flow heat exchangers for indirect evaporative cooling - paving the path towards sustainable cooling of buildings

This paper provides a comparative study of the performance of cross-flow and counter-flow M-cycle heat exchangers for dew point cooling. It is recognised that evaporative cooling systems offer a low energy alternative to conventional air conditioning units. Recently emerged dew point cooling, as the renovated evaporative cooling configuration, is claimed to have much higher cooling output over the conventional evaporative modes owing to use of the M-cycle heat exchangers. Cross-flow and counter-flow heat exchangers, as the available structures for M-cycle dew point cooling processing, were theoretically and experimentally investigated to identify the difference in cooling effectiveness of both under the parallel structural/operational conditions, optimise the geometrical sizes of the exchangers and suggest their favourite operational conditions. Through development of a dedicated computer model and case-by-case experimental testing and validation, a parametric study of the cooling performance of the counter-flow and cross-flow heat exchangers was carried out. The results showed the counter-flow exchanger offered greater (around 20% higher) cooling capacity, as well as greater (15%–23% higher) dew-point and wet-bulb effectiveness when equal in physical size and under the same operating conditions. The cross-flow system, however, had a greater (10% higher) Energy Efficiency (COP). As the increased cooling effectiveness will lead to reduced air volume flow rate, smaller system size and lower cost, whilst the size and cost are the inherent barriers for use of dew point cooling as the alternation of the conventional cooling systems, the counter-flow system is considered to offer practical advantages over the cross-flow system that would aid the uptake of this low energy cooling alternative. In line with increased global demand for energy in cooling of building, largely by economic booming of emerging developing nations and recognised global warming, the research results will be of significant importance in terms of promoting deployment of the low energy dew point cooling system, helping reduction of energy use in cooling of buildings and cut of the associated carbon emission.

A comparative study of the characteristics of French Fries produced by deep fat frying and air frying

Air frying is being projected as an alternative to deep fat frying for producing snacks such as French Fries. In air frying, the raw potato sections are essentially heated in hot air containing fine oil droplets, which dehydrates the potato and attempts to impart the characteristics of traditionally produced French fries, but with a substantially lower level of fat absorbed in the product. The aim of this research is to compare: 1) the process dynamics of air frying with conventional deep fat frying under otherwise similar operating conditions, and 2) the products formed by the two processes in terms of color, texture, microstructure, calorimetric properties and sensory characteristics Although, air frying produced products with a substantially lower fat content but with similar moisture contents and color characteristics, it required much longer processing times, typically 21 minutes in relation to 9 minutes in the case of deep fat frying. The slower evolution of temperature also resulted in lower rates of moisture loss and color development reactions. DSC studies revealed that the extent of starch gelatinization was also lower in the case of air fried product. In addition, the two types of frying also resulted in products having significantly different texture and sensory characteristics.

Multiculturalism and Policymaking : A comparative study of Danish and Swedish cultural policies since 1969

This master’s thesis deals with the cultural diversity policies of Denmark and Sweden within the cultural sector. It attempts at explaining why these two “most-similar” scandinavian countries having in common the same cultural model, “the architect model”, opted for different policies when it came to cultural diversity: Assimilationism for Denmark and multiculturalism for Sweden. I show that though institutional and power-interest factors had an impact, ideas as “programmatic beliefs” (Sheri E. Berman 2001) or “frames” (Erik Bleich 2003) played the ultimate role. I evaluate their relative importance by analyzing the anthropological dimension of the countries cultural policies since 1969. The study confirms that at least in the cultural sector, Danish policies have been assimilationist and Swedish ones multiculturalist and proposes a new classification of terms.By investigating immigrants cultures, it fills a gap left by previous researchers working on a common Nordic cultural model.

Usual clinical practice for early supported discharge after stroke with continued rehabilitation at home : an observational comparative study

Introduction: Based on randomised controlled trials, evidence exists that early supported discharge (ESD) from the hospital with continued rehabilitation at home has beneficial effects after stroke; however, the effects of ESD service in regular clinical practice have not been investigated. The purpose of the current study was to compare ESD service with conventional rehabilitation in terms of patient outcomes, caregiver burden at 3 and 12 months and the use and costs of healthcare during the first year after stroke. Material and methods: This study was a subgroup analysis of a longitudinal observational study of patients who received care in the stroke unit at Karolinska University Hospital in Sweden. Patients who met the inclusion criteria for ESD in previous experimental studies were included. The patients were referred to available rehabilitation services at discharge, and comparisons between those who received ESD service (the ESD group, n = 40) and those who received conventional rehabilitation (the NoESD group, n = 110) were performed with regard to independence in activities of daily living (ADL), the frequency of social activities, life satisfaction, and caregiver burden and the use and costs of healthcare during the first year after stroke. Results: At 3 and 12 months, no differences were observed with regard to patient outcomes; however, ESD was associated with a lower caregiver burden (p = 0.01) at 12 months. The initial length of stay (LOS) at the hospital was 8 days for the ESD group and 15 days for the NoESD group (p = 0.02). The median number of outpatient rehabilitation contacts was 20.5 for the ESD group (81% constituting ESD service) and 3 for the NoESD group (p<0.001). There was no difference between the groups with regard to overall healthcare costs. Conclusions: ESD service in usual clinical practice renders similar health benefits as conventional rehabilitation but a different pattern of resource use and with released capacity in acute stroke care.

Growth, structural change and technological capabilities Latin America in a comparative perspective

Countries differ in terms of technological capabilities and complexity of production structures. According to that, countries may follow different development strategies: one based on extracting rents from abundant endowments, such as labor or natural resources, and the other focused on creating rents through intangibles, basically innovation and knowledge accumulation. The present article studies international convergence and divergence, linking structural change with trade and growth through a North South Ricardian model. The analysis focuses on the asymmetries between Latin America and mature and catching up economies. Empirical evidence supports that a shift in the composition of the production structure in favor of R&D intensive sectors allows achieving higher rates of growth in the long term and increases the capacity to respond to demand changes. A virtuous export-led growth requires laggard countries to reduce the technological gap with respect to more advanced ones. Hence, abundance of factor endowments requires to be matched with technological capabilities development for countries to converge in the long term.

Comparative analysis of the volatile fraction from Annona cherimola Mill. cultivars by solid-phase microextraction and gas chromatography–quadrupole mass spectrometry detection

The analysis of volatile compounds in Funchal, Madeira, Mateus and Perry Vidal cultivars of Annona cherimola Mill. (cherimoya) was carried out by headspace solid-phase microextraction (HS-SPME) combined with gas chromatography–quadrupole mass spectrometry detection (GC–qMSD). HS-SPME technique was optimized in terms of fibre selection, extraction time, extraction temperature and sample amount to reach the best extraction efficiency. The best result was obtained with 2 g of sample, using a divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fibre for 30 min at 30 °C under constant magnetic stirring (800 rpm). After optimization of the extraction methodology, all the cherimoya samples were analysed with the best conditions that allowed to identify about 60 volatile compounds. The major compounds identified in the four cherimoya cultivars were methyl butanoate, butyl butanoate, 3-methylbutyl butanoate, 3-methylbutyl 3-methylbutanoate and 5-hydroxymethyl-2-furfural. These compounds represent 69.08 ± 5.22%, 56.56 ± 15.36%, 56.69 ± 9.28% and 71.82 ± 1.29% of the total volatiles for Funchal, Madeira, Mateus and Perry Vidal cultivars, respectively. This study showed that each cherimoya cultivars have 40 common compounds, corresponding to different chemical families, namely terpenes, esters, alcohols, fatty acids and carbonyl compounds and using PCA, the volatile composition in terms of average peak areas, provided a suitable tool to differentiate among the cherimoya cultivars.

Effectiveness of high-throughput miniaturized sorbent- and solid phase microextraction techniques combined with gas chromatography–mass spectrometry analysis for a rapid screening of volatile and semi-volatile composition of wines: a comparative study

In this study the feasibility of different extraction procedures was evaluated in order to test their potential for the extraction of the volatile (VOCs) and semi-volatile constituents (SVOCs) from wines. In this sense, and before they could be analysed by gas chromatography–quadrupole first stage masss spectrometry (GC–qMS), three different high-throughput miniaturized (ad)sorptive extraction techniques, based on solid phase extraction (SPE), microextraction by packed sorbents (MEPS) and solid phase microextraction (SPME), were studied for the first time together, for the extraction step. To achieve the most complete volatile and semi-volatile signature, distinct SPE (LiChrolut EN, Poropak Q, Styrene-Divinylbenzene and Amberlite XAD-2) and MEPS (C2, C8, C18, Silica and M1 (mixed C8-SCX)) sorbent materials, and different SPME fibre coatings (PA, PDMS, PEG, DVB/CAR/PDMS, PDMS/DVB, and CAR/PDMS), were tested and compared. All the extraction techniques were followed by GC–qMS analysis, which allowed the identification of up to 103 VOCs and SVOCs, distributed by distinct chemical families: higher alcohols, esters, fatty acids, carbonyl compounds and furan compounds. Mass spectra, standard compounds and retention index were used for identification purposes. SPE technique, using LiChrolut EN as sorbent (SPELiChrolut EN), was the most efficient method allowing for the identification of 78 VOCs and SVOCs, 63 and 19 more than MEPS and SPME techniques, respectively. In MEPS technique the best results in terms of number of extractable/identified compounds and total peak areas of volatile and semi-volatile fraction, were obtained by using C8 resin whereas DVB/CAR/PDMS was revealed the most efficient SPME coating to extract VOCs and SVOCs from Bual wine. Diethyl malate (18.8 ± 3.2%) was the main component found in wine SPELiChrolut EN extracts followed by ethyl succinate (13.5 ± 5.3%), 3-methyl-1-butanol (13.2 ± 1.7%), and 2-phenylethanol (11.2 ± 9.9%), while in SPMEDVB/CAR/PDMS technique 3-methyl-1-butanol (43.3 ± 0.6%) followed by diethyl succinate (18.9 ± 1.6%), and 2-furfural (10.4 ± 0.4%), are the major compounds. The major VOCs and SVOCs isolated by MEPSC8 were 3-methyl-1-butanol (26.8 ± 0.6%, from wine total volatile fraction), diethyl succinate (24.9 ± 0.8%), and diethyl malate (16.3 ± 0.9%). Regardless of the extraction technique, the highest extraction efficiency corresponds to esters and higher alcohols and the lowest to fatty acids. Despite some drawbacks associated with the SPE procedure such as the use of organic solvents, the time-consuming and tedious sampling procedure, it was observed that SPELiChrolut EN, revealed to be the most effective technique allowing the extraction of a higher number of compounds (78) rather than the other extraction techniques studied.

Comparative analysis between a CAD model design and physical models obtained by manufacturing additive technologies using optical scan

This article presents a detailed study of the application of different additive manufacturing technologies (sintering process, three-dimensional printing, extrusion and stereolithographic process), in the design process of a complex geometry model and its moving parts. The fabrication sequence was evaluated in terms of pre-processing conditions (model generation and model STL SLI), generation strategy and physical model post-processing operations. Dimensional verification of the obtained models was undertook by projecting structured light (optical scan), a relatively new technology of main importance for metrology and reverse engineering. Studies were done in certain manufacturing time and production costs, which allowed the definition of an more comprehensive evaluation matrix of additive technologies.

A comparative study of population traits between two South American populations of the striped-legged hermit crab Clibanarius vittatus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quality of life in women with vulvar cancer submitted to surgical treatment: a comparative study

Objectives: To investigate the occurrence and severity of lymphoedema of the lower extremities (LLE), quality of life (QoL), and urinary and sexual dysfunction in women with vulvar cancer submitted to surgical treatment.Study design: Twenty-eight patients with vulvar cancer submitted to vulvectomy and inguinofemoral lymphadenectomy and 28 healthy, age-matched women (control group) were evaluated. The occurrence and severity of LLE were determined by Miller's Clinical Evaluation. QoL, urinary function and sexual function were assessed by the EORTC QLQ-C30, SF-ICIQ and FSFI questionnaires, respectively. The differences between groups and correlations were assessed using Student's r-test, Chi-squared test, Mann-Whitney U-test and Spearman's rho test.Results: The groups were similar in terms of marital status, educational status, menopausal status, hormone therapy and height. The occurrence and severity of LLE were higher in women with vulvar cancer compared with the control group (p < 0.001 and p = 0.003, respectively). A significant association was found between the severity of LLE and advanced age (p = 0.04), and the severity of LLE and higher body mass index (BMI; p = 0.04) in patients with vulvar cancer. In the patients with vulvar cancer, there was a significant correlation between the severity of LLE and worse QoL in the following domains: physical, cognitive, emotional, social, fatigue, pain, sleep and financial questions (p < 0.05). There was no difference in urinary function between the two groups (p = 0.113). Age and number of deliveries were the only variables associated with the occurrence of urinary incontinence (p = 0.01). Urinary incontinence was present in women with a mean age of 74.9 +/- 4.6 years and a mean of 7.3 +/- 1.3 normal deliveries. There was no difference between the groups in terms of the sexual function. Multivariate analysis showed an association between sexual function and age (p = 0.01), and sexual function and being in a stable relationship (p = 0.02).Conclusion: Patients submitted to vulvectomy or inguinofemoral lymphadenectomy for vulvar cancer are at higher risk of developing LLE compared with healthy, age-matched women. This has a negative effect on QoL, but does not interfere with urinary or sexual function. (C) 2012 Elsevier B.V. All rights reserved.

Comparative cytogenetic and allozyme analysis of Mugil rubrioculus and M. curema (Teleostei : Mugilidae) from Venezuela

A comparative cytogenetic and allozyme analysis of sympatric specimens of Mugil rubrioculus and M. curema from Venezuela is reported. Specimens of M. rubrioculus exhibit a 2n=48 karyotype with exclusively acrocentric (NF=48) chromosomes, one pair of NORs interstitially located on chromosome pair number 8 and constitutive heterochromatin distributed in pericentromeric position of all chromosomes. Specimens of M. curema show cytogenetic features significantly different in comparison to M. rubrioculus in terms of chromosome number and morphology (2n=24 biarmed chromosomes, NF=48) and NORs location (telomeric region of the largest metacentric pair). Starch gel electrophoresis analysis at 20 presumptive loci reveals a reduced genetic difterentiation between the two species. In fact, though a total of ten private alleles are identified; all loci share alleles between the two species and the obtained Nei's genetic distance (D= 0.060) is lower than the values obtained between other congeneric mullet species. Thus, the cytogenetic and allozyme data sets indicate quite different degrees of genetic divergence between M. rubrioculus and M. curema. This could either reflect an underestimate of molecular divergence owing to cryptic variation or different rates of molecular/chromosomal evolution. Whatever the explanation, this study confirms the power of karyological data in discriminating species of Mugilidae.

Comparative ablation rate from a Er : YAG laser on enamel and dentin of primary and permanent teeth

This study was conducted to analyze the ablation rate and micromorphological aspects of microcavities in enamel and dentin of primary and permanent teeth using a Er:YAG laser system. Micromorphological evaluation has been performed in terms of permanent teeth; however, little information about Er: YAG laser interaction with primary teeth can be found in the literature. Because children have been the most beneficiary patients with laser therapy in our offices, it is extremely necessary to compare the effects of this kind of laser system on the enamel and dentin of permanent and primary teeth. In this study, we used eleven intact primary anterior exfoliated teeth and six extracted permanent molar teeth. We used a commercial laser system: a Er: YAG Twin Light laser system (Fotona Medical Lasers, Slovenia) at 2940 nm, changing average energy levels per pulse ( 100, 200, 300, and 400 mJ) producing 48 microcavities in enamel and dentin of primary and permanent teeth. Primary teeth are more easily ablated than are permanent teeth, when related to enamel or dentin. However, while this laser system is capable of slowly revealing the enamel's microstructure, in dentin only the lowest laser energies permit this kind of observation, more easily decomposing the original tissue aspect, when related to primary or permanent teeth. Statistically, the only different factor at the 5% level was an energy per pulse of 400 mJ, confirming the results found in SEM. Our results showed that dentin in both primary and permanent teeth is less resistant to Er: YAG laser ablation; this fact is easily observed under SEM observation and through the ablation rate evaluation.

Comparative study of cogeneration systems in a chemical industry

With the large penetration of the natural gas into the Brazilian energy structure, industries such as paper mills and chemical plants are analyzing the feasibility of implementing cogeneration schemes appropriate to this fuel. The analysis of the energy demand patterns of a chemical company from the photographic sector revealed the possibility of using combined cycles or diesel engine cogeneration schemes keeping the existing compression refrigeration units and steam or gas cycle cogeneration systems with absorption refrigeration units. In terms of economic attractiveness, an analysis based on the method of the internal rate of return was performed. The results indicated that the schemes composed by reciprocating engines and combined cycle with compression chillers, as well as the gas cycle scheme with absorption chiller, present return periods of up to 3 years, showing that the investment in cogeneration could be of interest for this plant. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Paracoccidioidomycosis: A comparative study of the evolutionary serologic, clinical and radiologic results for patients treated with ketoconazole or amphotericin B plus sulfonamides

A comparative study of two groups of patients with paracoccidioidomycosis was carried out with the objective of comparing the evolutionary serologic, clinical and radiologic results after 6, 12, 15 and 18 months of treatment with ketoconazole (22 patients) or amphotericin B plus sulfonamides (32 patients). The serologic data analyzed as a whole showed a tendency to sharper drops in antibody titers in the patients treated with ketoconazole. Clinically patients treated with ketoconazole fared better but the differences were not statistically significant. No statistical difference was detected between groups in terms of the results of radiologic evolution. © 1985 Martinus Nijhoff/Dr W. Junk Publishers.