Nanopartículas de Pd suportadas em compósitos óxido-carbono: influência das interações metal-suporte na oxidação de etanol em meio básico

Fuel cells powered directly with ethanol (Direct Ethanol Fuel Cell-DEFC) are very attractive for the possibility of using a renewable fuel in the generation of clean energy. However, it is still necessary to deepen the understanding of catalytic processes and their dependence on the catalytic properties. This work proposes to study the catalytic activity of ethanol oxidation in an alkaline medium of Pd nanoparticles supported in carbon oxide hybrids using various transition metal oxides (MoO3, TiO2, WO3 and ZrO2). The materials prepared were characterized by techniques such as X-ray diffraction, transmission electron microscopy (TEM) and X-ray dispersive spectroscopy (EDX) to verify the structure, the distribution of particles in the supports and the presence of Pd on particles oxide. Experiments of X-rays absorption spectroscopy were carried out using soft X-rays (SXS) to evaluate the changes in the electronic properties of the Pd particles caused by interactions with different oxides. Measurements of cyclic voltammetry and potential sweeps of adsorbed CO oxidation allowed evaluating general aspects of the catalysts' electrochemical behavior and determining the electrochemically active area thereof. The catalytic performances of ethanol oxidation in alkaline medium were evaluated by electrochemical techniques (potential scan and chronoamperometry), and showed an improvement in activity with the addition of oxides in material containing only carbon, which was most pronounced for the catalyst containing TiO2. This improvement was predominantly associated with the electronic effects caused by the interaction of Pd on the support, causing a vacancy in the 4d band of Pd which, in turn, produces variations in adsorption energies of the species...

Nanopartículas de Pd suportadas em compósitos óxido-carbono: influência das interações metal-suporte na oxidação de etanol em meio básico

Fuel cells powered directly with ethanol (Direct Ethanol Fuel Cell-DEFC) are very attractive for the possibility of using a renewable fuel in the generation of clean energy. However, it is still necessary to deepen the understanding of catalytic processes and their dependence on the catalytic properties. This work proposes to study the catalytic activity of ethanol oxidation in an alkaline medium of Pd nanoparticles supported in carbon oxide hybrids using various transition metal oxides (MoO3, TiO2, WO3 and ZrO2). The materials prepared were characterized by techniques such as X-ray diffraction, transmission electron microscopy (TEM) and X-ray dispersive spectroscopy (EDX) to verify the structure, the distribution of particles in the supports and the presence of Pd on particles oxide. Experiments of X-rays absorption spectroscopy were carried out using soft X-rays (SXS) to evaluate the changes in the electronic properties of the Pd particles caused by interactions with different oxides. Measurements of cyclic voltammetry and potential sweeps of adsorbed CO oxidation allowed evaluating general aspects of the catalysts' electrochemical behavior and determining the electrochemically active area thereof. The catalytic performances of ethanol oxidation in alkaline medium were evaluated by electrochemical techniques (potential scan and chronoamperometry), and showed an improvement in activity with the addition of oxides in material containing only carbon, which was most pronounced for the catalyst containing TiO2. This improvement was predominantly associated with the electronic effects caused by the interaction of Pd on the support, causing a vacancy in the 4d band of Pd which, in turn, produces variations in adsorption energies of the species...

Nanocompósito de poliestireno reciclado, bentonita sódica e hemi-hidrato de sulfato de cálcio: obtenção e caracterização.

Nesta Tese foram preparados, em solução, filmes híbridos de argila e poliestireno provenientes de copos descartáveis comercializados no mercado brasileiro, com acetato de etila e glicerol. Posteriormente, foi adicionado o Hemi-hidrato de sulfato de cálcio como carga de reforço. Tanto a argila quanto o glicerol, assim como o hemihidrato de sulfato de cálcio, foram utilizados nos percentuais relativos à massa do poliestireno fragmentado correspondendo a 1%,2%, 3%,4%, 5% e 7%. Dos filmes, nos percentuais 3, 4, 5 e 7, exclui-se o percentual de 4% e os demais foram fragmentados e submetidos a extrusão, com resfriamento natural, à seco, produzindo-se grãos com os quais foi avaliado o índice de fluidez e injetados para a moldagem de corpos de prova rígidos. O desempenho dos corpos rígidos, foi comparado com os resultados do HIPS 484, e o GPPS comercializados no mercado brasileiro. Os filmes foram caracterizados por difração de raios X, microscopia eletrônica de varredura (MEV), calorimetria exploratória diferencial (DSC), além dos testes de resistência à tração, fluorescência de raios X, EDS e FTIR. Amostra do filme, ultrafino, obtido a partir da solução com o percentual de 5% foi observada ao microscópio ótico e no microscópio eletrônico de transmissão, assim como amostras de corpos rígidos microtomizadas. Nos corpos rígidos, além das análises instrumentais citadas, foram avaliadas a resistência à flexão, modulo de flexão, resistência à tração, alongamento e resistência ao impacto Izod. O desempenho sob chama foi avaliado em amostras de filme e também do corpo rígido. Resultados do DRX, e da MET foram coerentes com a bibliografia para nanocompósitos argila-polímero e, associado às respostas dos demais ensaios, indicaram um material de boa qualidade morfológica e boas propriedades mecânicas comparadas ao HIPS 484 e ao GPPS. Sob a chama o material produzido apresentou maior resistência à queima avaliado pela quantidade aparente de material residual para um mesmo tempo sob fogo. Constatou-se, também, uma boa dispersão das cargas na matriz polimérica, assim como uma adequada interação entre os elementos orgânicos e inorgânicos do material, a delaminação parcial da argila e quebra da estrutura do hemi-hidrato. Isto resultou em um bom desempenho mecânico e térmico do compósito que pode ser atribuído, tanto a uma forte influência dos íons metálicos presentes nas cargas inorgânicas, quanto às adições presentes na formulação dos copos descartáveis.

Tratamento de argila montmorilonítica para a produção de nanocompósitos poliméricos com retardo de propagação de chama

Compared to conventional composites, polymer matrix nanocomposites typically exhibit enhanced properties at a significantly lower filler volume fraction. Studies published in the literature indicate t hat the addition of nanosilicate s can increase the resistance to flame propagation in polymers. In this work, a treatment of montmorillonite (MMT) nano clay and the effect of its ad dition o n flame propagation characteristics of vinyl ester were studied. The resea rch was conducted in two stages. The first stage focused on the purification and activation of the MMT clay collected from a natural deposit to improve compatibility with the polymer matrix . Clay modification with sodium acetate was also studied to improve particle dispersion in the polymer. The second step was focused on the effect of the addition of the treated clay on nanocomposites ’ properties. Nanocomposites with clay con tents of 1, 2, 4 wt. % were processed. T he techniques for the characterization of the clay included X - ray fluorescence (XRF), X - r ay d iffraction (XRD), thermogravimetric a nalysis (TGA), d ifferential scanning c alorimetry (DSC) , s urface area (BET) and Fourier transform infrared spectroscopy (FTIR). For t he characterization of the nanocomposites , the techniques used were thermogravimetric a nalysis (TGA) , differential scanning c alorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) , scanning electron mi croscopy (SEM), transmission electron m icroscopy (TEM), and the determination of tensile strength, modulus of elasticity and resistance to flame propagation. According to the results, the purification and activation treatment with freeze - drying used in thi s work for the montmorillonite clay was efficient to promote compatibility and dispersion in the polymer matrix as evidenced by the characterization of the nanocomposite s . It was also observed that the clay modifica tion using sodium acetate did not produce any significant effect to improve compatibilization of the clay with the polymer. The addition of the treated MMT resulted in a reduction of up to 53% in the polymer flame propagation speed and did not affect the mechanical tensile strength and modulus o f elas ticity of the polymer, indicating compatibility between the clay and polymer. The effectiveness in reducing flame propagation speed peaked for nanocomposites with 2 wt. % clay, indicating that this is the optimum clay concentration for this property. T he clay treatment used in this work enables the production of vinylester matrix nanocomposites with flame - retardancy properties .

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet

Influência do método de síntese e caracterização de pós compósitos de NiO- Ce1-xEuxO2-δ para anodos catalíticos de células a combustível

Fuel cells are electrochemical devices that convert chemical energy into electricity. Due to the development of new materials, fuel cells are emerging as generating clean energy generator. Among the types of fuel cells, categorized according to the electrode type, the solid oxide fuel cells (SOFC) stand out due to be the only device entirely made of solid particles. Beyond that, their operation temperature is relatively high (between 500 and 1000 °C), allowing them to operate with high efficiency. Another aspect that promotes the use of SOFC over other cells is their ability to operate with different fuels. The CeO2 based materials doped with rare earth (TR+3) may be used as alternatives to traditional NiO-YSZ anodes as they have higher ionic conductivity and smaller ohmic losses compared to YSZ, and can operate at lower temperatures (500-800°C). In the composition of the anode, the concentration of NiO, acting as a catalyst in YSZ provides high electrical conductivity and high electrochemical activity of reactions, providing internal reform in the cell. In this work compounds of NiO - Ce1-xEuxO2-δ (x = 0.1, 0.2 and 0.3) were synthesized from polymeric precursor, Pechini, method of combustion and also by microwave-assisted hydrothermal method. The materials were characterized by the techniques of TG, TPR, XRD and FEG-SEM. The refinement of data obtained by X-ray diffraction showed that all powders of NiO - Cex-1EuxO2-δ crystallized in a cubic phase with fluorite structure, and also the presence of Ni. Through the characterizations can be proved that all routes of preparation used were effective for producing ceramics with characteristics suitable for application as SOFC anodes, but the microwave-assisted hydrothermal method showed a significant reduction in the average grain size and improved control of the compositions of the phases

Síntese e caracterização de ferrita ni-zn pelo método dos precursores poliméricos calcinada por energia de microondas

Magnetic ceramics have been widely investigated, especially with respect to intrinsic and extrinsic characteristics of these materials. Among the magnetic ceramic materials of technological interest, there are the ferrites. On the other hand, the thermal treatment of ceramic materials by microwave energy has offered various advantages such as: optimization of production processes, high heat control, low consumption of time and energy among others. In this work were synthesized powders of Ni-Zn ferrite with compositions Ni1- xZnxFe2O4 (0.25 ≤ x ≤ 0.75 mols) by the polymeric precursor route in two heat treatment conditions, conventional oven and microwave energy at 500, 650, 800 and 950°C and its structural, and morphological imaging. The materials were characterized by thermal analysis (TG/ DSC), X-ray diffraction (XRD), absorption spectroscopy in the infrared (FTIR), scanning electron microscopy (SEM), X-ray spectroscopy and energy dispersive (EDS) and vibrating sample magnetometry (VSM). The results of X-ray diffraction confirmed the formation of ferrite with spinel-type cubic structure. The extrinsic characteristics of the powders obtained by microwave calcination and influence significantly the magnetic behavior of ferrites, showing particles ferrimagnéticas characterized as soft magnetic materials (soft), is of great technological interest. The results obtained led the potential application of microwave energy for calcining powders of Ni-Zn ferrite

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Producción de primicia en invernadero de híbridos de espárrago verde (Asparagus officinalis var. Altilis) en su cuarto año productivo

Resumen: La producción de espárragos en Argentina está caracterizada por una elevada estacionalidad concentrada en el periodo octubre-diciembre, por lo que el empleo de invernaderos brinda la posibilidad de ampliar el calendario de oferta, anticipando la entrada en producción. Con el objetivo de evaluar el rendimiento de primicia de diferentes híbridos de espárrago verde, se realizó un ensayo en invernadero con ocho híbridos, en UCA Buenos Aires, iniciado el 15/11/2006, mediante plantines de 100 días a 1m*0,3m. Se evaluaron los siguientes genotipos: Italo, Zeno, Eros, Ercole, H-668, Marte, y Giove, de origen italiano, y UC-157 de origen americano, como testigo por ser el tradicionalmente cultivado en Argentina. Se evaluaron 22 cosechas, con una frecuencia de día por medio, del 17/08/2011-25/10/2011. Se estudiaron diferencias en kg totales y comerciales (PFT y PFC), Nº turiones totales y comerciales/ha (NTT y NTC) y distribución de calibres (DC): Jumbo (J), Extra-Large (XL), Large (L), Medium (M), Small (S) y Asparagina (A). Se efectuó un análisis multifactor ANOVA LSD test (P>0.05). En promedio se obtuvieron: PFT: 17053; PFC: 7904 kg.ha-1; NTT: 670566 y NTC: 520938 turiones.ha-1. Se destacaron: en PFT: Italo: 29458a, Zeno: 23056b, Giove: 23034b y H-668: 18568bc; en PFC: Italo: 14850a, Giove: 9856b, Zeno: 9130bc y H-668: 8228bcd; en NTT: Italo: 842512a, H-668: 754512a, Giove: 715000b y Eros: 707498b; en NTC: Italo: 844998a, H-668: 667502b y Eros: 542498bc y en DC: en J: Italoa, Gioveb, Zenobc y UC-157bcd; en XL: Italoa, Zenoab y Gioveb; en L: Giovea, Italoa, Zenoab, H-668abc y UC-157abc; en M: Italoa, H-668ab y Erosab; en S: H-668a, Erosa e Italoab y en A: H-668a y Marteab. Por lo expuesto resulta alentadora la productividad de Italo, Giove, Zeno y H-668 para producción de espárrago verde de primicia en invernadero.

Caracterización y evaluación de seis híbridos y seis variedades de polinización libre de maíz (Zea mays L.) en El Viejo, Chinandega

Con el propósito de comparar materiales genéticos y contribuir al incremento de la producción de maíz, se desarrolló el presente estudio en la finca “La Frutalosa” en El Viejo, Chinandega. Se estableció un diseño en Bloques Completos al Azar con cuatro bloques y el factor estudio fueron 12 cultivares de maíz (híbridos: HQ-INTA 993, H-53, H-INTA 991, C-343, C-385, HS-56; sintéticos: NB-NUTR INTA, NB-6, NBS, NB-9043; criollos: MAICITO y MAIZON). Los resultados obtenidos fueron objetos de un análisis de varianza (ANDEVA), separación de medias según Tukey (∞=0.05), análisis de correlación y contrastes ortogonales. Los cultivares evaluados presentaron variación en la mayoría de los descriptores de crecimiento y desarrollo. Los materiales criollos obtuvieron mayor altura de planta que los híbridos y sintéticos. En promedio de rendimiento los sintéticos superaron a los criollos e híbridos. Los materiales de mayor rendimiento fueron MAIZON (3534.6 kg ha-1), NB-9043 (2964.8 kg ha-1) y HS-56 (2922.4 kg ha-1). La distancia apical se correlacionó de manera negativa con las variables peso de mazorca, longitud de mazorca y el rendimiento, lo que indica que la mayoría de los materiales evaluados de altos rendimientos tienen poca cobertura de mazorca.

Evaluación de veinte híbridos de maíz (Zea mays L.) en cinco localidades de Nicaragua

Con el objetivo de identificar híbridos de maíz con alto rendimiento y buena estabilidad en diferentes ambientes, se evaluaron 20 genotipos de grano blanco en 5 localidades de Nicaragua. El diseño utilizado fue un Látice rectangular 5 x 4 con 3 repeticiones. Cada unidad experimental estuvo constituida por 2 hileras de 5 metros de longitud, con un espaciamiento de 0.20 y 0.80 metros entre plantas e hileras respectivamente, para una densidad poblacional de aproximadamente 62,500 plantas por hectárea. La parcela útil la constituyeron las dos hileras que conformaron cada unidad experimental. Se realizó análisis de varianza para el rendimiento de grano por localidad y a través de localidades. La interacción genotipo x ambiente se determinó mediante el análisis de efectos principales aditivos e interacciones multiplicativas (modelo AMMI). Los híbridos H10 y H13 mostraron los mayores rendimientos promedios a través de todas las localidades, superando al mejor testigo H19 (H-INTA 991) en 13 y 14 % respectivamente, no obstante, expresaron su mayor potencial en ambientes favorables. Los híbridos H11, H15 y H17 superaron en rendimiento a la media general y fueron identificados por AMMI como estables, por presentar puntuaciones cercanas a cero (0.11, 0.17 y 0.16, respectivamente). En este estudio se identificó como ambientes favorables a Quilalí y Campos Azules y como menos favorable a la localidad de Melchorita

Evaluación agronómica de nueve híbridos de cebolla (Allium cepa (L.) Cif) en el valle de Sébaco, Matagalpa

Un estudio de nueve híbridos comerciales de cebolla ( Allium cepa L.), y un testigo comercial, se realizó en el Centro Experimental del Valle de Sébaco del INTA, en San Isidro con el objetivo de evaluar el comportamiento agronómico , rendimiento de bulbo, así como por categoría de los mismos. El diseño experimental fue un BCA con cuatro repeticiones. Los datos obtenidos se analizaron con ANDEVA y prueba de rangos múltiples de Tuckey (p =0.05). Número de h ojas en 9 híbridos fueron significativos: Arad, Neptune, Martin, Noam. Amazone y Appolo = 6 Hojas respectivamente, y Russel, Equanex y Galil con = 5 hojas respectivamente . Altura de plantas en híbridos fueron significativos: Noam, Equane x, Martin y Arad = 60 cm respectivamente ; Neptune, Amazon, Appolo y Russel entre 55 cm - 60 cm , y Galil = 55 cm respectivamente . Mancha Púrpura: no hubo diferencias significativa s . Mayores rendimientos híbridos bulbos amarillo Amazon y Ap polo, con promedi os > 60 y 38 Tm ha - 1 de bulbos comerciales respectivamente. Mayor adaptación: Amazon (60.8 Tm ha - 1 ). Equanex, Appolo y Martin tuvieron rendimientos supe riores a las 39.5, 38.4, 36.6 Tm ha - 1 respectivamente . Arad, Galil, y Russel tuvieron rendimiento menores a los 29.0, 24.9, y 22.5 T m ha - 1 respectivamente . Noam y Neptune fueron los híbridos que no se adaptaron a las condiciones del CEVAS – INTA. Categorías de bulbo: Pre - pack fue superior co n 58.6 Tm ha - 1 a Large medium 26.1 Tm ha - 1 .

Ensayo regional de híbridos experimentales de sorgos (Sorghum bicolor L. Moench.), durante el año 2001

La siembra de sorgo en monocultivo, en Centroamérica, ocupa un 39% de su superficie cultivada, lo cual significa unas 11 O 000 ha. Casi en su totalidad, este sistema de cultivo se realiza utilizando semilla híbrida. La semilla utilizada para la siembra, es importada por no poderse producir en la región debido a que los progenitores no tienen adaptación tropical. Esta situación hace que la semilla no este accesible a todos los productores. El presente vivero permitirá seleccionar híbridos que se puedan reproducir en la región y que las empresas locales puedan ponerlos accesibles. El vivero incluyó 29 híbridos experimentales más un testigo local. El diseño utilizado fue látice simple 6 x 5 con 4 repeticiones, área experimental y parcela útil fue de 7 m2• Las variables a medir fueron: rendimiento de grano, altura de planta, días a floración, largo y exerción de panoja, días a madurez fisiológica, tolerancia a plagas, enfermedades y acame. Los ensayos se enviaron a cuatro localidades .. Solamente se recibieron datos de San Andrés (El Salvador) y CNIA (Nicaragua). Se realizó un análisis de varianza por localidad y un combinado de las dos localidades. En San Andrés, el híbrido ATX 623 x 96 A 635, de grano blanco, produciendo 861 O kg ha· 1 , fue el mejor. En el análisis combinado de ambas localidades, los híbridos: ATC 629 x 86EO 361 (7758 kg ha·') y ATX 623 x 96CA635 (7445 kg ha·1), ambos de grano blanco, fueron los mejores, rindiendo un 21% más que el testigo local. La media general fue de 5783 kg ha·, y el coeficiente de variación de 18.5%.

Comportamiento agroindustrial de diez variedades de caña de azúcar (Saccharum spp. híbridos) Ingenio Benjamín zeledón: caña planta

Se estudió el comportamiento agro-industrial de 9 cultivares de caña de azúcar (ja. 64-19, Q. 75, C.87-51, B62-163, B.62-118 B41-227, Db.661-133, Db.51-362, D. 158-41 y un testigo L-68-90) L apuntación se realizó sobre un suelo de textura franca el 27 de mayo de 1987, ejecutándose la cosecha de caña planta a los 12 meses de edad el 26 de Mayo de 1988. El diseño estadístico empleado fue el de bloques completos al azar con cinco repeticiones: se tomaron como criterio de evaluación los parámetros: germinación, población, altura, peso de los tallos, rendimiento agrícola, industrial y agro-industrial. Los resultados obtenidos se sometieron a análisis de varianza y posteriormente a la prueba de Newman-Keuls al 5 % de probabilidad. Las variedades que mostraron mejor comportamiento en el rendimiento agrícola fueron la Q.75, D.158-41 y la Ja. 64-19. Mientras que en el rendimiento azucarero se destacaron la Ja. 64-19, B.62-118 y B.41-127. Sobresaliendo en el rendimiento agro-industrial los genotipos Q.75, Ja. 64-19 y D.158-41.

Comportamiento agro-industrial de diez cultivares de caña de azúcar (Saccharum spp. híbridos): Ingenio Benjamín Zeledón, caña planta y primer retoño

Comportamiento agro –industrial de 10 cultivares de caña de azúcar (sacharum spp. híbrido). Ing. Benjamín Zeledón. Caña planta y 1er retoño Autor: Reynaldo J Calderón Mena. En los ciclos 86/87 y 87/88 en el ingenio Benjamín Zeledón, fue estudiado el comportamiento agro-industrial de nueve cultivares de caña de azúcar en comparación con la variedad L 68-90, el ensayo fue sembrado el 26 de marzo de 1986 en suelos francos de la serie Buenos Aires y su cosecha se realizó en cañas de 12 meses de edad el 10 de Marzo de 1987 y el 14 de marzo de 1988, en los ciclos de caña planta y el primer retoño respectivamente: El diseño utilizado fue el de bloques completos al azar y los parámetros estudiados fueron: población,. Altura, peso promedio de los tallos, rendimiento agrícola, rendimiento industrial, rendimiento agro-industrial y % de floración: los datos obtenidos fueron sometidos a análisis de varianza y a las pruebas de Newman Keuls y Dunnett ambas al 5% de significación: en el ciclo de caña planta los mejores comportamientos fueron obtenidos: en el rendimiento agrícola por las variedades Q 75 y DB 66-113; en el rendimiento agro-industrial por la variedad testigo L68-90 y en el rendimiento agro-industrial por las variedades q 75, Db 66-113, DB 51-362 y B62-118; mientras que en el ciclo de primer retoño los resultados más sobresalientes fueron obtenidos : en el rendimiento agrícola por las variedades B 62- 163, b6-118, DB66-113D 51-362, q75 Y C87-51; en el rendimiento agro- industrial por las variedad B62-118, B62-163, Db51-362, Db 66-113 y C87-51.