Utilização do cavaco de madeira como combustível alternativo para a produção de vapor de água em uma caldeira aquatubular com grelha fixa do tipo PIN HOLE

The steady increase in the price of oil and its derivatives, carbon credits, the concern with the environment combined with the precipitation of rain water and lack of water resources that Brazil has suffered in 2014 caused a migration of participation sources of energy in the Brazilian energy matrix. The hydropower sector suffered big drop at 2013 and is suffering so far, contributing thus to the generation and cogeneration of thermal energy using renewable energy sources such as: sugarcane bagasse, wood chips, rice husks, among others. The selling price of the electricity market reached the level of R$ 807, 00 MWh in January 2014 (Source: ANEEL), heating the Brazilian thermoelectric sector. Although thermoelectric use in bulk water as vaporizing fluid to produce electricity and use in various processes, water reuse plans have become an important factor in these industries. The increased use of biomass has been the bagasse which is allied to the sugarcane sector, strong market in Brazil, and consists basically use the rest of sugar cane, sugarcane industries that would play out. The sugar and ethanol industry is very unstable and only lasts for 6-8 months a year, and the remaining time in the period known as between crop that corresponds to the planting and harvesting of sugarcane and then enter the period of vintage which is the constant cane harvesting and crushing it. This instability of the market and the thermoelectric idle period leads the thermoelectric industries to seek other sources of renewable energy, such as wood chips (pine, Eucalyptus, Orange), rice husk, sorghum among others, to not be dependent on alcohol sector. The present work aims to study the use of wood chips as an alternative biomass for burning a fuel that essentially uses bagasse, the thermoelectric in question consists of two boilers that produce together 350 t / h ... (Complete Abstract click electronic access below)

Estudo sobre desruptores endócrinos em sistemas aquáticos: detecção e perspectivas de tratamento das águas do Rio Aporé-MS/GO, utilizando-se adsorventes sólidos

Pós-graduação em Ciência dos Materiais - FEIS

Resíduos agrícolas e argila expandida no cultivo da orquídea Oncidium baueri Lindl.

For orchid cultivation in containers is essential to select the right substrate, since this will influence the quality of the final product, it serve as a support for the root system of the plants. This study aimed to evaluate different agricultural residues and expanded clay in Oncidium baueri Lindl. orchid cultivation. The plants were subjected to treatments: pinus husk + carbonized rice husk, pinus husk + coffee husk, pinus husk + fibered coconut, pecan nut husk, expanded clay, fibered coconut, coffee husk, carbonized rice husk, pinus husk. After eleven months of the experiment, the following variables were evaluated: plant height; largest pseudo-bulb diameter; number of buds; shoot fresh dry matter; the longest root length; number of roots; root fresh matter; root dry matter; and electric conductivity; pH and water retention capacity of the substrates. Except the expanded clay, the other substrates showed satisfactory results in one or more traits. Standing out among these substrates pinus husk + coffee husk and pine bark + fibered coconut, which favored the most vegetative and root characteristic of the orchid. The mixture of pinus husk + coffee husk and pinus husk + fibered coconut, provided the best results in vegetative and root growth of the orchid Oncidium baueri and the expanded clay did not show favorable results in the cultivation of this species.

Compostagem de resíduo sólido de abatedouro avícola

The great demand for animal protein was responsible for the increase on the broilers production and hence, the generation of waste from the poultry slaughter was increased as well, which in turn, propelled the development of techniques that allow the reuse and recycling of these wastes. The objective of this study was to evaluate the efficiency of composting on the treatment and recycling of solid waste from poultry slaughterhouse. The solid waste was from a commercial poultry slaughterhouse and was composed of viscera, muscle, fat, bone, blood and feathers that was mixed with a source of carbon, rice husk. Initially, a windrow with a volume of 1.5m(3) was built, and then some parameters were monitored: temperature, total solids (TS), volatile (VS), N, P, K, organic carbon (C), composting organic matter (COC), organic matter resistant to composting (MORC), chemical oxygen demand (COD), mass and volume of the windrow, most probable number (MPN) of total and fecal coliforms, as well as their reductions during the process. The maximum temperature reached in the center of the windrow was 53.3 degrees C (weekly average) since reductions of weight of TS and VS and volume during the pre-composting were 36.1, 44.3 and 23.3%, respectively and during the composting process was 21.8, 23.8 and 4.4%. The low volume reduction can be associated with high concentrations of MORC (40.1%) which can be mainly related to the quality of the carbon source. The process produced satisfactory total reductions of TS, VS and volume that were respectively, 50.1, 57.5 and 26.7%. However reductions were observed in 43% of amount of nitrogen in the final compound. Despite reductions in nitrogen content, composting proved to be an effective method in the treatment of solid waste from poultry slaughterhouse.

Análise do potencial de micro-organismos dos gêneros Lectthophora e Cryptococcus para a produção de biocumbustíveis

A busca de novas fontes de energia tem sido estimulada pela demanda crescente do mercado e o bioetanol é uma alternativa promissora para esta questão. A produção de etanol a partir de resíduos agroindustriais lignocelulósicos está sendo pesquisada em vários laboratórios do Brasil e do exterior. Os resíduos da agroindústria são formados, em grande parte, por fibra vegetal lignocelulósica, a qual é altamente resistente à degradação, dificultando a conversão dos componentes a monossacarídeos fermentescíveis. Desta forma, a prospecção de micro-organismos que viabilizem a conversão de material lignocelulósico em etanol tem aumentado consideravelmente. Sendo assim, o estudo de micro-organismos associados às formigas cortadeiras, os quais são adaptados ao uso da biomassa lignocelulolítica, pode ser promissor para a descoberta de enzimas adequadas à degradação eficiente da fibra vegetal, podendo significar um passo adiante na produção do etanol de segunda geração. Neste trabalho analisamos a ação hidrolítica e a liberação de açúcares fermentescíveis por fungos dimórficos do gênero Lecythophora e de leveduras do gênero Cryptococcus sobre o material lignocelulósico. A metodologia empregada consistiu na inoculação das linhagens em diferentes resíduos da agroindústria, como bagaço de cana-de-açúcar, casca de café, casca de arroz e sabugo de milho triturado, seguida da quantificação dos açúcares redutores liberados, bem como da produção de enzimas hidrolíticas extracelulares, como endoamilase, exoamilase, pectinase, endoglucanase, exoglucanase e xilanase. O gênero Lecythophora mostrou-se melhor produtor enzimático quando comparado com o gênero Cryptococcus, ambos em meio suplementado com bagaço de cana-de-açúcar. Ainda, foi realizado o inóculo de culturas mistas das melhores linhagens pertencentes ao gênero Lecythophora. A produção enzimática constatada indicou o potencial das linhagens...

Supressividade a Fusarium oxysporum f. sp. cubense por produtos orgânicos

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Lâminas de fertirrigação e substratos na produção e qualidade de gérbera de vaso

Fertigation management of gerbera crop has been many times performed inadequately, and it has been worsened when mixtures of substrates with different physical and chemical characteristics are used. Aiming at evaluating the production and quality of potted gerbera in two substrates and different levels of fertigation, the experiment was conducted in the greenhouse of the DRN/Soil Science, FCA/UNESP, Botucatu (SP). A 5 x 2 factorial randomized block design (5 levels of fertigation and 2 substrates) was adopted with 4 replications. Levels of fertigation corresponded to maintenance of 100% available water (AW) in the substrate; 100 to 80% of AW; 100 to 60% of AW; 100 to 40% of AW and 100 to 20% of AW. The substrates were as follows: 1- mixed coconut fiber (50% pellet coconut fiber and 50% coir fiber), 2- 40% red soil, 40% decomposed pine bark, 10% composition 1 (40% decomposed pine bark, 30% vermiculite and 30% carbonized rice husk) and 10% composition 2 (75% decomposed pine bark and 25% needles of pine). Plants at the marketing stage were evaluated according to the number of leaves; diameter of leaf surface; leaf area; fresh and dry phytomass of leaves, inflorescence and total plant; inflorescence number and diameter, stem diameter, plant height, leaf area rate and electrical conductivity of the substrate solution. Plants of better quality were obtained when they were maintained in levels of 100% available water and the mixed coconut fiber was used as substrate.

Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil

Natural fibers have been highlighted as a renewable material that can replace materials from oil and its derivatives. In this context, Brazil becomes the perfect setting because of the diversity of fibers found in its territory, such as sugarcane, sisal, rice, cotton, coconut, pineapple, among others. The paineiras (Chorisia speciosa St. Hil) are typically Brazilian trees, which produce paina as fruit. These fruits are still little studied as a source of lignocellulose by research groups. This project aimed obtaining and characterization of cellulose nanofibers from the fibers from the paina fibers. Obtaining nanocellulose is practically made through simplified chemical processes. First, was performed out pre-treatments to removal of waxes, lignin and hemicellulose. The first stage of pre-treatment was carried out by alkaline aqueous solution of sodium hydroxide (NaOH) at 5wt%, where the fibers were under constant agitation for 1h at 70°C. Through alkali treatment it was possible to remove most of the lignin, hemicellulose, waxes and extractives. After the alkaline treatment was done bleaching with an aqueous solution of sodium hydroxide (NaOH) to 4wt% and hydrogen peroxide (H2O2) to 24wt% 1:1 during 2h with constant stirring to 50 °C. Through bleaching was possibe to remove residual lignin, and got cellulose with 72% of crystallinity. Nanocellulose of paina fibers was extracted using different conditions of acid hydrolysis with sulfuric acid (H2SO4) to 50wt%. After acid hydrolysis, the suspensions were centrifuged during 30 min and dialyzed in water to remove excess acid until neutral pH (6-7). Then the suspensions were passed by ultrasonification in an ultrasound 20 kHz during 1h in an ice bath. Untreated, alkalinized and bleached fibers as well as cellulose nanoparticles were characterized by the techniques of thermogravimetry ... (Complete abastract click electronic access below)

Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil

Natural fibers have been highlighted as a renewable material that can replace materials from oil and its derivatives. In this context, Brazil becomes the perfect setting because of the diversity of fibers found in its territory, such as sugarcane, sisal, rice, cotton, coconut, pineapple, among others. The paineiras (Chorisia speciosa St. Hil) are typically Brazilian trees, which produce paina as fruit. These fruits are still little studied as a source of lignocellulose by research groups. This project aimed obtaining and characterization of cellulose nanofibers from the fibers from the paina fibers. Obtaining nanocellulose is practically made through simplified chemical processes. First, was performed out pre-treatments to removal of waxes, lignin and hemicellulose. The first stage of pre-treatment was carried out by alkaline aqueous solution of sodium hydroxide (NaOH) at 5wt%, where the fibers were under constant agitation for 1h at 70°C. Through alkali treatment it was possible to remove most of the lignin, hemicellulose, waxes and extractives. After the alkaline treatment was done bleaching with an aqueous solution of sodium hydroxide (NaOH) to 4wt% and hydrogen peroxide (H2O2) to 24wt% 1:1 during 2h with constant stirring to 50 °C. Through bleaching was possibe to remove residual lignin, and got cellulose with 72% of crystallinity. Nanocellulose of paina fibers was extracted using different conditions of acid hydrolysis with sulfuric acid (H2SO4) to 50wt%. After acid hydrolysis, the suspensions were centrifuged during 30 min and dialyzed in water to remove excess acid until neutral pH (6-7). Then the suspensions were passed by ultrasonification in an ultrasound 20 kHz during 1h in an ice bath. Untreated, alkalinized and bleached fibers as well as cellulose nanoparticles were characterized by the techniques of thermogravimetry ... (Complete abastract click electronic access below)

Crescimento inicial e morfologia foliar em plantas de Mimosa caesalpiniaefolia Benth. Em função do manejo microbiano, sob estresse salino

The sabiá (Mimosa caesalpiniaefolia Benth.) is an endemic species of the Caatinga biome, considered tolerant to salt and water stress. The process of salinization of soil and groundwater and surface water is one of the most important problems of environmental degradation, with its harmful effects being more pronounced in the areas of arid and semiarid regions, and rapidly growing in many parts of the globe, causing problems of the major crop yield. Organic conditioners as barnyard manure, and rice hulls can contribute to reducing the PST, possibly due to the release of CO2 and the production of organic acids during the decomposition of organic matter, and act as sources of calcium and magnesium and inhibit the availability sodium. The intimate association of mycorrhizae and beneficial to plants results in increased uptake of water and nutrients by plants, especially phosphorus, due to their low mobility in soil. The objective of this study was to evaluate the initial growth of thrush seedlings under inoculation with mycorrhizal fungi and fertilized with manure corral and irrigated with water of different salinity levels. The experiment was conducted in greenhouse conditions of vegetation on the premises of the Agricultural School of Jundiaí - UFRN, Campus Macaíba. The adopted statistical design was randomized composed of twelve treatments - three substrates (sterile soil, manure and FMA), four salinity levels (0.2, 1.5, 3.0 and 4.5 dS m-1 ) and five repetitions, totaling sixty experimental units. The results indicate that inoculation with mycorrhizal fungi own contributions to the growth of plants, especially in roots and shoots, which suggests that its application is beneficial in establishing thrush plants in natural conditions, with poor soil in P. Levels salinity caused no effects with statistical significance in plant development, indicating Sabia resistance to it.

Propagação de Camellia sinensis: efeito do genótipo, estaca, substrato, recipiente e ácido indolbutírico

Tem sido relatado que as estacas de Camellia sinensis possuem baixa capacidade de emitir raízes, motivando assim a realização de estudos básicos para otimização do processo de propagação por estacas. Assim sendo, o presente trabalho objetivou quantificar o potencial rizogênico de diferentes genótipos e o efeito da posição da estaca no ramo e incisão na base, do substrato, tamanho do recipiente e ácido indolbutírico no enraizamento de estacas semi-lenhosas dessa espécie. Para tal, foram coletados ramos dos genótipos IAC 259, F15 e Comum, em Pariquera-Açu-SP, no inverno de 2010. em seguida, preparadas as estacas, contendo uma gema e uma folha, foram mantidas em viveiro com 70% de sombreamento. Estacas da posição basal e mediana dos ramos são as mais adequadas para estaquia devido a menor mortalidade e maior enraizamento. A injúria na base da estaca não afeta a mortalidade e o enraizamento das estacas, porém induz à formação de calo. Também não houve diferenças na mortalidade e no enraizamento das estacas quando as mesmas foram mantidas em recipiente de 50, 90 e 120 cm³. Comparado com vermiculita, areia e casca de arroz carbonizada, o solo foi o melhor substrato para estaquia, que na presença do ferimento, juntamente com o tratamento das estacas com 10 g L-1 de AIB promoveu a maior porcentagem de enraizamento. Todavia, ainda nessa condição a mortalidade média das estacas foi de 42%. O potencial de enraizamento do genótipo Comum foi superior ao do IAC 259 e F15.

Efeito de fungos micorrízicos arbusculares e da adubação no crescimento de mudas de Eugenia uniflora L., produzidas em diferentes substratos.

O objetivo deste estudo foi avaliar o efeito de fungos micorrízicos arbusculares (FMAs), da adubação e da composição do substrato no crescimento de mudas de Eugenia uniflora. As sementes foram germinadas em vermiculita média e repicadas para tubetes (100 cm3) contendo substratos à base de vermicomposto e casca de arroz carbonizada e, como controle, utilizou-se do substrato comercial à base de casca de pínus. Estes substratos foram testados com e sem inoculação micorrízica, adicionada ao substrato, como também se testaram a presença e a ausência de adubação de cobertura. Foram analisadas as propriedades físico-químicas dos substratos formulados. Avaliaram-se a altura, o diâmetro do colo, a agregação das raízes ao substrato, a biomassa seca aérea, a biomassa seca radicial e foram determinados a relação entre altura e diâmetro do colo e o índice de qualidade de Dickson. A inoculação com FMAs não influenciou no crescimento das mudas, enquanto a interação entre substratos e adubação foi significativa para a maioria das variáveis. A ausência de resposta aos FMAs foi, provavelmente, devido às altas concentrações de fósforo nestes substratos. Concluiu-se que o substrato à base de vermicomposto e casca de arroz carbonizada, na proporção de 20/80, pode ser utilizado na produção de mudas desta espécie.

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Pré-tratamento enzimático de resíduos lignocelulósicos para sacarificação.

No Brasil são gerados anualmente toneladas de resíduos agroindustriais de composição lignocelulósica, os quais podem ser utilizados como biomassa para produção de etanol de segunda geração (2G). Nesse trabalho avaliou-se a aplicação de uma rota biológica para a remoção da lignina de materiais lignocelulósicos e posterior sacarificação por celulases. Extratos brutos enzimáticos ricos em lacase foram produzidos em cultivo líquido estático pelo fungo Pleurotus ostreatus e utilizados na presença e ausência de mediadores químicos para o pré-tratamento de casca de arroz e serragem de eucalipto urofila. O pré-tratamento da casca de arroz com lacases possibilitou um aumento de 2,6 vezes na concentração de açúcares após a sacarificação em comparação com a biomassa não pré-tratada. Não foram obtidos resultados significativos na sacarificação com o prétratamento da serragem de eucalipto pelas lacases, no entanto, modificações em picos correspondentes a lignina e a celulose foram observadas em análises realizadas por FTIR.

Avaliação do comportamento produtivo de morangueiro em diferentes substratos.

A Serra Gaúcha é a principal região do Rio Grande do Sul produtora de morangueiro cultivado em substratos fora do solo. O substrato mais utilizado na região é a casca de arroz carbonizada. Essa matéria prima está escasseando por ser utilizada como fonte de energia em caldeiras. Além disso, por não ser uma região produtora de arroz, o custo da casca é muito alto. O presente trabalho teve como objetivo avaliar materiais que possam substituir a casca de arroz na produção de substratos para cultivos de morangueiros. O experimento foi realizado em casa de vegetação, em Bento Gonçalves (RS), entre abril de 2007 a abril de 2008. Mudas das cultivares Aromas e Oso Grande foram plantadas para embalagens tipo ?travesseiro?, contendo 5 dm3 de substratos. Os tratamentos foram constituídos de diversas proporções de caca de arroz, engaço de cacho de uva, composto orgânico e acícula de pinus. O delineamento experimental foi inteiramente casualizado com três repetições. De acordo com os resultados as cultivares Aromas e Oso Grande apresentam a mesma produtividade de frutos quando cultivadas no substrato casca de arroz misturada em diferentes proporções com engaço, com composto e Acícula de Pinus. Porém, a cultivar Oso Grande produz menos morango quando cultivada em casca de arroz pura e mistura com o solo. A casca de arroz carbonizada pode ser parcialmente substituída por engaço, composto orgânico e acícula de pínus.