803 resultados para Catálise Heterogénea
Resumo:
The preparation of nanostructured materials using natural clays as support, has been studied in literature under the same are found in nature and consequently, have a low price. Generally, clays serve as supports for metal oxides by increasing the number of active sites present on the surface and can be applied for various purposes such as adsorption, catalysis and photocatalysis. Some of the materials that are currently highlighted are niobium compounds, in particular, its oxides, by its characteristics such as high acidity, rigidity, water insolubility, oxidative and photocatalytic properties. In this scenario, the study aimed preparing a composite material oxyhydroxide niobium (NbO2OH) / sodium vermiculite clay and evaluate its effectiveness with respect to the natural clay (V0) and NbO2OH. The composite was prepared by precipitation-deposition method and then characterized by X-ray diffraction, infrared spectroscopy (XRD), energy dispersive X-ray (EDS), thermal analysis (TG/DTG), scanning electron microscopy (SEM), N2 adsorption-desorption and investigation of distribution of load. The application of the material NbO2OH/V0 was divided in two steps: first through oxidation and adsorption methods, and second through photocatalytic activity using solar irradiation. Studies of adsorption, oxidation and photocatalytic oxidation monitored the percentage of color removal from the dye methylene blue (MB) by UV-Vis spectroscopy. The XRD showed a decrease in reflection d (001) clay after modification; the FTIR indicated the presence of both the clay when the oxyhydroxide niobium to present bands in 1003 cm-1 related to Si-O stretching bands and 800 cm-1 to the Nb-O stretching. The presence of niobium was also confirmed by EDS indicated that 17 % by mass amount of the metal. Thermal analysis showed thermal stability of the composite at 217 °C and micrographs showed that there was a decrease in particle size. The investigation of the surface charge of NbO2OH/V0 found that the material exhibits a heterogeneous surface with average low and high negative charges. Adsorption tests showed that the composite NbO2OH/V0 higher adsorption capacity to remove 56 % of AM, while the material removed from V0 only 13 % showed no NbO2OH and adsorptive capacity due to the formation of H-aggregates. The percent removal of dye color for the oxidation tests showed little difference from the adsorption, being 18 and 66 % removal of dye color for V0 and NbO2OH/V0 respectively. The NbO2OH/V0 material shows excellent photocatalytic activity managing to remove just 95,5 % in 180 minutes of the color of MB compared to 41,4 % and 82,2 % of V0 the NbO2OH, proving the formation of a new composite with distinct properties of its precursors.
Resumo:
In this work, the oxidation and mineralization of paracetamol, based in an advanced oxidative process promoted by heterogeneous photocatalysis, was evaluated. The action of two photocatalysts (titanium dioxide, and a composite based on the association between titanium dioxide and zinc phthalocyanine dye) was studied. First of all, experiments in laboratory scale were performed using as radiation font a 400 W high pressure mercury lamp. The mineralization of paracetamol, promoted by both photocatalysts, was evaluated working with 4L of solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. To find the best experimental conditions, the influence of hydrogen peroxide concentration and pH was evaluated for the reactions. The best results for the reactions in laboratory scale was obtained using 33,00 mg L-1 of hydrogen peroxide in natural pH (6,80). Under these conditions, 100% oxidation was reached in just 40 minutes of reaction using TiO2 P25, while the mineralization was 78%. Using the composite, the mineralization was 63% in 2 hours of reaction and a oxidation of almost 100% was reached after 60 minutes. A CPC reactor (compound parabolic concentrator) was employed in the expanded work scale, using the sun as irradiation source. In this case the experiments were performed using 50 L of aqueous solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. The assays were done at pH 3,00 and natural pH (6,80). The used concentration of hydrogen peroxide was 33,00 mg L-1, adopted after laboratory scale studies. The reaction at pH 3,00 shows to be more advantageous, since under natural pH (6,80), the use of deionized water was necessary to prepare the solutions, probably because the deleterious action of carbonate ions, known hydroxyl radical scavengers. Using solar irradiation, the reaction mediated by the composite was more efficient when compared with the assays under laboratory scale since the composite presents the advantage of promoting a better use of visible radiation. Under these conditions, the mineralization increased from 40% to 56% under pH 3,00. At natural pH the oxidation occurred more slowly and the mineralization decreased from 56% to 50%. Thus, the use of pH 3,00 will be more interesting in real scale applications, even if it is necessary the pH correction before the discard of the treated effluent to the environment.
Resumo:
El presente trabajo estudia la viabilidad a la hora de aplicar un modelo de programación basado en la extracción de paralelismo a nivel de tareas sobre distintas arquitecturas heterogéneas basadas en un procesador multinúcleo de propósito general acelerado con uno o más aceleradores hardware. Se ha implementado una aplicación completa cuyo objetivo es la detección de bordes en una imagen (implementando el Algoritmo de Canny), y se ha evaluado en detalle su rendimiento sobre distintos tipos de arquitecturas, incluyendo CPUs multinúcleo de última generación, sistemas multi-GPU y una arquitectura objetivo basada en procesadores ARM Cortex-A15 acelerados mediante un DSP C66x de la compañía Texas Instruments. Los resultados experimentales demuestran la viabilidad de este tipo de implementación también para arquitecturas heterogéneas novedosas como esta última, e ilustran la facilidad de programación que introduce este tipo de modelos de programación sobre arquitecturas de propósito específico.
Resumo:
El objetivo de este ensayo es el de relacionar de forma reflexiva las nuevas dinámicas de colonización, dominación y poder contemporáneas, con las cartografías simbólicas de la ciudad global y sus respectivas fronteras o bordes sistémicos, muchos de ellos desapercibidos por las personas y atravesados por jerarquías y clasificaciones las cuales se hallan inmersas, a su vez,en una multidimensionalidad social tanto positiva como negativa que genera que podamos hablar de una indecibilidad de lo simbólico. En torno a ello se desprende, asimismo, el objetivo de repensar desde una perspectiva crítica y relacional el espacio urbano y heterogéneo en el cual confluyen formas diversas de identidad, subjetividad y aplicabilidad normativa y social de lo jurídico. Finalmente se dejará planteada la pregunta de hasta dónde puede llegar la agencia humana ante cada una de las distintas fronteras y bordes sistémicos y simbólicos de lo global-heterogéneo, considerando para ello aportes teóricos como los de Suely Rolnik, que indican que hoy en día existen subjetividades acríticas por las cuales el poder adquiere cierta plasticidad y hegemonía alienantes.
Resumo:
El desarrollo de las ciudades comporta una integral transformación o renovación de zonas o barrios degradados, envejecidos e inadaptados a los servicios y estructuras requeridos por las actividades económicas y sociales actuales. Estas actuaciones de transformación y regeneración exigen el derribo de aquellas edificaciones incompatibles con la ordenaciónurbanística de nueva implantación, lo que conduce al desalojo y reubicación de sus ocupantes, de comprensible complejidad por las graves consecuencias que de ello se derivan cuando se trata de viviendas habitadas.
Resumo:
Trinitrotoluene in the purification step (TNT) produced in industries, are carried out two washes at the end of the process. The first wash is done with vaporized water, which originates from the first effluent called yellow water, then the second washing with the use of sodium sulfite is performed (Na2SO3), generating a second effluent red water. This study aimed to study the individual effects, as well as the association of heterogeneous photocatalysis using TiO2 and biological treatment in air lift reactor using activated sludge (bacterial biomass) for the remediation of wastewater contaminated with nitroaromatic compounds in order to reduce toxicity and adjust the legal parameters according to regulatory agencies for disposal in waterways. The photocatalytic treatment was conducted by factorial design obtaining the best reaction conditions (pH 6.5 and concentration of TiO2 0.1 gL-1), with best results obtained at 360 minutes of reaction, reducing the absorbance 97.00%, 94.20% of the chemical oxygen demand (COD), 67.70% of total phenols, as well as a total reduction of observed peaks and assigned to nitroaromatic compounds by high-performance liquid chromatography. In the biological treatment, there was a 53.40% reduction in absorbance at 275 nm 10.00% 36.00% COD and total phenols in a short time (3 days), while for extended periods (48 days) there was an antagonistic influence on the results so that was the elevation of these parameters (COD and total phenols) instead of reducing. Chromatographic analysis confirmed the effectiveness of the biological degradation by reducing the peaks corresponding to compounds DNT and TNT. The Association of photocatalytic and biological treatments decreased results in the order of 91.10% absorbance, 70.26% of total phenols and 88.87% of COD. While the combination of biological and photocatalytic treatments generated relatively lower efficiencies, with 77.30% of absorbance reduction, 62.10% reduction of total phenols and a decrease of 87.00% of COD. In general, when comparing the chemical and biological processes in isolation, the photocatalytic treatment showed the best results. However, comparing the results of isolation and established associations, the association biological x photocatalysis showed more promising results in the treatment of red water effluent.
Resumo:
Se desarrolló un método de desinfección de agua de pozo por medio de fotocatálisis heterogénea utilizando dióxido de titanio (TiO2) como catalizador. Este proceso se llevó a cabo utilizando agua de pozo de la comunidad Patricia Puertas del Área Natural Protegida Colima, que pertenece al municipio de Suchitoto del departamento de Cuscatlán. Para desarrollar el método de desinfección se tomaron una serie de parámetros físico-químicos y microbiológicos para determinar el nivel de contaminación; luego se aplicó el método de desinfección por medio fotocatálisis heterogénea al agua de pozo, colocando diferentes concentraciones de TiO2 en suspensión a botellas PET de 3 litros de capacidad en un concentrador solar de paredes planas colocado al sol durante diferentes tiempos para determinar el tiempo y concentración óptimo que permitiría la mayor eliminación de Escherichia coli; al determinar el tiempo y concentración óptimos, se realizó el proceso de eliminación de Escherichia coli por fotocatálisis heterogénea para determinar la capacidad de eliminación del método utilizado. El TiO2 y la luz penetran a través de la célula y es absorbida por el ácido nucléico; la absorción de la luz ultravioleta por el ácido nucléico provoca una reordenación de la información genética, lo que interfiere con la capacidad reproductora de la célula, por consiguiente la Escherichia coli es eliminada por el TiO2 y la luz UV como resultado del daño fotoquímico
Resumo:
2006
Resumo:
The field activities are essential for the education of a good taxonomist. The most common problems found in field activities are: a) large number of students, b) heterogeneous educational background and unlevelled knowledge of the participants, c) repetitions and tendency of collecting the more evidents life-forms. The causes and consequences of such problems are discussed herein. The proposed solution is a methodology, based on many years of experience in field courses for undergraduate and graduate courses. Topics about the ideal number of participants, area of coverage, period of activity, division of work and the necessary material and equipment are discussed. According to the number of species collected at the same place, this methodology may result in a list of local species with precise information about the life-forms, habitat, common names, frequency, uses, phenology and further information in this kind of work. The results of the aplication of this metodology in a field course held in the region of Ubatuba-SP are presented.
Resumo:
Universidade Estadual de Campinas . Faculdade de Educação Física
Resumo:
In this work we have studied cyclooctene epoxidation with PhIO, using a new iron porphyrin, 5,10,15,20-tetrakis(2-hydroxy-5-nitrophenyl)porphyrinato iron(III), supported on silica matrices via eletrostatic interaction and / or covalent bonds as catalyst. These catalysts were obtained and immobilized on the solid supports propyltrimethylammonium silica (SiN+); propyltrimethylammonium and propylimidazole silica [SiN+(IPG)] and chloropropylsilica (CPS) via elestrostatic interactions and covalent binding. Characterization of the supported catalysts by UV-Vis spectroscopy and EPR (Electron paramagnetic resonance) indicated the presence of a mixture of FeII and FeIII species in all of the three obtained catalysts. In the case of (Z)-cyclooctene epoxidation by PhIO the yields observed for cis-epoxycyclooctane were satisfactory for the reactions catalyzed by the three materials (ranging from 68% to 85%). Such results indicate that immobilization of metalloporphyrins onto solid supports via groups localized on the ortho positions of their mesophenyl rings can lead to efficient catalysts for epoxidation reactions. The catalyst 1-CPS is less active than 1-SiN and 1-SiN(IPG), this argues in favour of the immobilization of this metalloporphyrin onto solids via electrostatic interactions, which is easier to achieve and results in more active oxidation catalysts. Interestingly, the activity of the supported catalysts remained the same even after three successive recyclings; therefore, they are stable under the oxidizing conditions.
Resumo:
The heterometal alkoxide [FeCl{Ti2(OPr i)9}] (1) was employed as a single source precursor for the preparation of Fe/Ti oxides under inert atmosphere. Three different synthetic procedures were adopted in the processing of 1, either employing aqueous HNO3 or HCl solutions, or in the absence of mineral acids. Products were characterised by powder X-ray diffractometry, scanning electron microscopy combined with energy dispersive X-ray spectroscopy (SEM/EDS) and Raman, electron paramagnetic resonance (EPR) and Mössbauer spectroscopies. Oxide products contained titanium(IV) and either iron(III) or iron(II), depending on reaction conditions and thermal treatment temperatures. An interesting iron(III)→iron(II) reduction was observed at 1000 ºC in the HNO3-containing system, leading to the detection of ilmenite (FeTiO3). SEM/EDS studies revealed a highly heterogeneous metal distribution in all products, possibly related to the presence of a significant content of carbon and of structural defects (oxygen vacancies) in the solids.
Resumo:
Thirty-eight stations were sampled in Guanabara Bay, Rio de Janeiro, Brazil, to assess the spatio-temporal diversity and biomass of sublittoral polychaetes. Samples were collected during the dry (September 2000) and rainy season (May 2001) in shallow sublittoral sediments. The polychaete spatial composition showed a heterogeneous distribution throughout the bay. A negative gradient of diversity and biomass was observed towards the inner parts of the bay and sheltered areas. A wide azoic area was found inside the bay. Some high-biomass and low-diversity spots were found near a sewage-discharge point. In these areas, the polychaete biomass increased after the rainy season. A diversified polychaete community was identified around the bay mouth, with no dramatic changes of this pattern between the two sampling periods. Deposit-feeders were dominant in the entire study area. The relative importance of carnivores and omnivores increased towards the outer sector, at stations with coarse sediment fractions. Guanabara Bay can be divided into three main zones with respect to environmental conditions and polychaete diversity and biomass patterns: A) High polychaete diversity, hydrodynamically exposed areas composed of sandy, oxidized or moderately reduced sediments with normoxic conditions in the water column. B) Low diversity and high biomass of deposit and suspension-feeding polychaete species in the middle part of the bay near continental inflows, comprising stations sharing similar proportions of silt, clay and fine sands. C) Azoic area or an impoverished polychaete community in hydrodynamically low-energy areas of silt and clay with extremely reduced sediments, high total organic matter content and hypoxic conditions in the water column, located essentially from the mid-bay towards the north sector. High total organic matter content and hypoxic conditions combined with slow water renewal in the inner bay seemed to play a key role in the polychaete diversity and biomass. Sedimentation processes and organic load coming from untreated sewage into the bay may have negatively affected the survivorship of the fauna.
Resumo:
A leishmaniose tegumentar americana adquiriu caráter epidêmico no Litoral Norte Paulista, desde a década de 1990. A partir de dados secundários, realizou-se estudo descritivo da doença no período de 1993 a 2005 nos quatro municípios que compõem a região e analisou-se a freqüência dos flebotomíneos capturados nos locais prováveis de transmissão. Foram notificados 689 casos autóctones de leishmaniose tegumentar, com casos isolados e agrupados, determinando uma distribuição espacial heterogênea, com sincronismo na manifestação e ciclicidade, em intervalo de seis a oito anos. Todas as faixas etárias foram acometidas, com ligeiro predomínio do sexo masculino, sem associação com uma ocupação. Capturou-se 2.758 flebotomíneos e a espécie Nyssomyia intermedia predominou (80,4%), no peri e intradomicílio. A doença apresentou perfil de transmissão peri e intradomiciliar, entre o periurbano e a mata, e no interior da mata. Neste caso, a transmissão estaria mais relacionada com os focos enzoóticos.
Resumo:
Resumo O objetivo deste artigo é mapear o cenário nacional de descentralização de recursos do governo federal para municípios brasileiros, via transferências voluntárias, por meio de programáticas ministeriais e de emendas parlamentares individuais dos deputados federais. Recorrendo ao método de pesquisa documental, fontes oficiais de informações foram acessadas, possibilitando a construção de banco de dados para análise e interpretação. Os resultados apontaram para uma distribuição heterogênea de recursos entre os municípios do Brasil. Além disso, o estudo concluiu que a taxa de liberação de propostas decorrentes de emendas parlamentares foi bem maior do que aquelas resultantes dos editais da própria programática dos ministérios.