Michigan Stadium expansion 1949

[construction of steel bleachers, 1949, raised capacity to 97, 239, view from the south]

Effect of nitrogen supply on leaf appearance, leaf growth, leaf nitrogen economy and photosynthetic capacity in maize (Zea mays L.)

Leaf area growth and nitrogen concentration per unit leaf area, N-a (g m(-2) N) are two options plants can use to adapt to nitrogen limitation. Previous work indicated that potato (Solanum tuberosum L.) adapts the size of leaves to maintain Na and photosynthetic capacity per unit leaf area. This paper reports on the effect of N limitation on leaf area production and photosynthetic capacity in maize, a C4 cereal. Maize was grown in two experiments in pots in glasshouses with three (0.84-6.0 g N pot(-1)) and five rates (0.5-6.0 g pot(-1)) of N. Leaf tip and ligule appearance were monitored and final individual leaf area was determined. Changes with leaf age in leaf area, leaf N content and light-saturated photosynthetic capacity, P a,, were measured on two leaves per plant in each experiment. The final area of the largest leaf and total plant leaf area differed by 16 and 29% from the lowest to highest N supply, but leaf appearance rate and the duration of leaf expansion were unaffected. The N concentration of expanding leaves (N-a or %N in dry matter) differed by at least a factor 2 from the lowest to highest N supply. A hyperbolic function described the relation between P-max and N-a. The results confirm the 'maize strategy': leaf N content, photosynthetic capacity, and ultimately radiation use efficiency is more sensitive to nitrogen limitation than are leaf area expansion and light interception. The generality of the findings is discussed and it is suggested that at canopy level species showing the 'potato strategy' can be recognized from little effect of nitrogen supply on radiation use efficiency, while the reverse is true for species showing the 'maize strategy' for adaptation to N limitation. (c) 2004 Elsevier B.V. All rights reserved.

Efficiency, costs and trade-offs in marine reserve system design

With marine biodiversity conservation the primary goal for reserve planning initiatives, a site's conservation potential is typically evaluated on the basis of the biological and physical features it contains. By comparison, socio-economic information is seldom a formal consideration of the reserve system design problem and generally limited to an assessment of threats, vulnerability or compatibility with surrounding uses. This is perhaps surprising given broad recognition that the success of reserve establishment is highly dependent on widespread stakeholder and community support. Using information on the spatial distribution and intensity of commercial rock lobster catch in South Australia, we demonstrate the capacity of mathematical reserve selection procedures to integrate socio-economic and biophysical information for marine reserve system design. Analyses of trade-offs highlight the opportunities to design representative, efficient and practical marine reserve systems that minimise potential loss to commercial users. We found that the objective of minimising the areal extent of the reserve system was barely compromised by incorporating economic design constraints. With a small increase in area (< 3%) and boundary length (< 10%), the economic impact of marine reserves on the commercial rock lobster fishery was reduced by more than a third. We considered also how a reserve planner might prioritise conservation areas using information on a planning units selection frequency. We found that selection frequencies alone were not a reliable guide for the selection of marine reserve systems, but could be used with approaches such as summed irreplaceability to direct conservation effort for efficient marine reserve design.

A path-dependent contingent-claims approach to capacity investments

This note presents a contingent-claims approach to strategic capacity planning. We develop models for capacity choice and expansion decisions in a single firm environment where investment is irreversible and demand is uncertain. These models illustrate specifically the relevance of path-dependent options analysis to planning capacity investments when the firm adopts demand tracking or average capacity strategies. It is argued that Asian/average type real options can explain hysteresis phenomena in addition to providing superior control of assets in place.

Analytic hierarchy process helps select site for limestone quarry expansion in Barbados

Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-economic-environmental factors. Adequate consideration of all the factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, technical and socio-economic-environmental factors were then identified. Third, a database was developed for each site with respect to each factor. Fourth, a hierarchical model in analytic hierarchy process (AHP) framework was then developed. Fifth, the relative ranking of the alternate sites was then derived through pair wise comparison in all the levels and through subsequent synthesizing of the results across the hierarchy through computer software (Expert Choice). The study reveals that an integrated framework using the AHP can help select a site for the quarry expansion project in Barbados.

Practice report: the role of environmental factors in industrial site selection activities: a case of limestone quarry expansion in Barbados, West Indies

Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-environmental factors. Adequate consideration of all factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, socio-environmental conditions were described and potential impacts identified. Third, a comparative matrix was constructed to evaluate relative site characteristics with respect to physical, ecological, socio-cultural and economic factors. The study shows that environmental factors were essential to the final site recommendation.

An analysis of costs in institutions of higher education in England

Cost functions are estimated, using random effects and stochastic frontier methods, for English higher education institutions. The article advances on existing literature by employing finer disaggregation by subject, institution type and location, and by introducing consideration of quality effects. Estimates are provided of average incremental costs attached to each output type, and of returns to scale and scope. Implications for the policy of expansion of higher education are discussed.

The role of environmental factors in industrial site selection activities:a case of limestone quarry expansion in Barbados, West Indies

Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-environmental factors. Adequate consideration of all factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, socio-environmental conditions were described and potential impacts identified. Third, a comparative matrix was constructed to evaluate relative site characteristics with respect to physical, ecological, socio-cultural and economic factors. The study shows that environmental factors were essential to the final site recommendation.

Development of a medium-capacity guideway transit planning guide

Rapid population increase and booming economic growth have caused a significant escalation in car ownership in many cities, leading to additional or, multiple traffic problems on congested roadways. The increase of automobiles is generating a significant amount of congestion and pollution in many cities. It has become necessary to find a solution to the ever worsening traffic problems in our cities. Building more roadways is nearly impossible due to the limitations of right-of-way in cities. Studies have shown that guideway transit could provide effective transportation and could stimulate land development. The Medium-Capacity Guideway Transit (MCGT) is one of the alternatives to solve this problem. The objective of this research was to better understand the characteristics of MCGT systems, to investigate the existing MCGT systems around the world and determine the main factors behind the planning of successful systems, and to develop a MCGT planning guide. The factors utilized in this study were determined and were analyzed using Excel. A MCGT Planning Guide was developed using Microsoft Visual Basic. ^ A MCGT was defined as a transit system whose capacity can carry up to 20,000 passengers per hour per direction (pphpd). The results shown that Light Rail Transit (LRT) is favored when peak hour demand is less than 13,000 pphpd. Automated People Mover (APM) is favored when the peak hour demand is more than 18,000 pphpd. APM systems could save up to three times the waiting time cost compared to that of the LRT. If comfort and convenience are important, then using an APM does make sense. However, if cost is the critical factor, then LRT will make more sense because it is reasonable service at a reasonable price. If travel time and safety (accident/crush) costs were included in calculating life-cycle “total” costs, the capital cost advantage of LRT disappeared and APM could become very competitive. The results also included a range of cost-performance criteria for MCGT systems that help planners, engineers, and decision-makers to select the most feasible system for their respective areas. ^

System operational costs reduction with non-conventional reactive power sources

Wind energy installations are increasing in power systems worldwide and wind generation capacity tends to be located some distance from load centers. A conflict may arise at times of high wind generation when it becomes necessary to curtail wind energy in order to maintain conventional generators on-line for the provision of voltage control support at load centers. Using the island of Ireland as a case study and presenting commercially available reactive power support devices as possible solutions to the voltage control problems in urban areas, this paper explores the reduction in total generation costs resulting from the relaxation of the operational constraints requiring conventional generators to be kept on-line near load centers for reactive power support. The paper shows that by 2020 there will be possible savings of 87€m per annum and a reduction in wind curtailment of more than a percentage point if measures are taken to relax these constraints.

Phonon anharmonicity and negative thermal expansion in SnSe

The anharmonic phonon properties of SnSe in the Pnma phase were investigated with a combination of experiments and first-principles simulations. Using inelastic neutron scattering (INS) and nuclear resonant inelastic X-ray scattering (NRIXS), we have measured the phonon dispersions and density of states (DOS) and their temperature dependence, which revealed a strong, inhomogeneous shift and broadening of the spectrum on warming. First-principles simulations were performed to rationalize these measurements, and to explain the previously reported anisotropic thermal expansion, in particular the negative thermal expansion within the Sn-Se bilayers. Including the anisotropic strain dependence of the phonon free energy, in addition to the electronic ground state energy, is essential to reproduce the negative thermal expansion. From the phonon DOS obtained with INS and additional calorimetry measurements, we quantify the harmonic, dilational, and anharmonic components of the phonon entropy, heat capacity, and free energy. The origin of the anharmonic phonon thermodynamics is linked to the electronic structure.

Tissue-specific bioscaffolds for adipose-derived stem/stromal cell expansion and delivery

Decellularized adipose tissue (DAT) is a promising biomaterial for soft tissue regeneration, and it provides a highly conducive microenvironment for human adipose-derived stem/stromal cell (ASC) attachment, proliferation, and adipogenesis. This thesis focused on developing techniques to fabricate 3-D bioscaffolds from enzymatically-digested DAT as platforms for ASC culture and delivery in adipose tissue engineering and large-scale ASC expansion. Initial work investigated chemically crosslinked microcarriers fabricated from pepsin-digested DAT as injectable adipo-inductive substrates for ASCs. DAT microcarriers highly supported ASC adipogenesis compared to gelatin microcarriers in a CELLSPIN system, as confirmed by glycerol-3-phosphate dehydrogenase (GPDH) enzyme activity, lipid accumulation, and endpoint RT-PCR. ASCs cultured on DAT microcarriers in proliferation medium also had elevated PPARγ, C/EBPα, and LPL expression which suggested adipo-inductive properties. In vivo testing of the DAT microcarriers exhibited stable volume retention and enhanced cellular infiltration, tissue remodeling, and angiogenesis. Building from this work, non-chemically crosslinked porous foams and bead foams were fabricated from α-amylase-digested DAT for soft tissue regeneration. Foams were stable and strongly supported ASC adipogenesis based on GPDH activity and endpoint RT-PCR. PPARγ, C/EBPα, and LPL expression in ASCs cultured on the foams in proliferation media indicated adipo-inductive properties. Foams with Young’s moduli similar to human fat also influenced ASC adipogenesis by enhanced GPDH activity. In vivo adipogenesis accompanied by a potent angiogenic response and rapid resorption showed their potential use in wound healing applications. Finally, non-chemically crosslinked porous microcarriers synthesized from α-amylase-digested DAT were investigated for ASC expansion. DAT microcarriers remained stable in culture and supported significantly higher ASC proliferation compared to Cultispher-S microcarriers in a CELLSPIN system. ASC immunophenotype was preserved for all expanded groups, with reduced adhesion marker expression under dynamic conditions. DAT microcarrier expansion upregulated ASC expression of early adipogenic (PPARγ, LPL) and chondrogenic (COMP) markers without inducing a mature phenotype. DAT microcarrier expanded ASCs also showed similar levels of adipogenesis and osteogenesis compared to Cultispher-S despite a significantly higher population fold-change, and had the highest level of chondrogenesis among all groups. This study demonstrates the promising use of DAT microcarriers as a clinically relevant strategy for ASC expansion while maintaining multilineage differentiation capacity.

AN EXAMINATION OF HYDROXYL RADICAL: OUR CURRENT UNDERSTANDING OF THE OXIDATIVE CAPACITY OF THE TROPOSPHERE THROUGH EMPIRICAL, BOX, AND GLOBAL MODELING APPROACHES

Hydroxyl radical (OH) is the primary oxidant in the troposphere, initiating the removal of numerous atmospheric species including greenhouse gases, pollutants that are detrimental to human health, and ozone-depleting substances. Because of the complexity of OH chemistry, models vary widely in their OH chemistry schemes and resulting methane (CH4) lifetimes. The current state of knowledge concerning global OH abundances is often contradictory. This body of work encompasses three projects that investigate tropospheric OH from a modeling perspective, with the goal of improving the tropospheric community’s knowledge of the atmospheric lifetime of CH4. First, measurements taken during the airborne CONvective TRansport of Active Species in the Tropics (CONTRAST) field campaign are used to evaluate OH in global models. A box model constrained to measured variables is utilized to infer concentrations of OH along the flight track. Results are used to evaluate global model performance, suggest against the existence of a proposed “OH Hole” in the tropical Western Pacific, and investigate implications of high O3/low H2O filaments on chemical transport to the stratosphere. While methyl chloroform-based estimates of global mean OH suggest that models are overestimating OH, we report evidence that these models are actually underestimating OH in the tropical Western Pacific. The second project examines OH within global models to diagnose differences in CH4 lifetime. I developed an approach to quantify the roles of OH precursor field differences (O3, H2O, CO, NOx, etc.) using a neural network method. This technique enables us to approximate the change in CH4 lifetime resulting from variations in individual precursor fields. The dominant factors driving CH4 lifetime differences between models are O3, CO, and J(O3-O1D). My third project evaluates the effect of climate change on global fields of OH using an empirical model. Observations of H2O and O3 from satellite instruments are combined with a simulation of tropical expansion to derive changes in global mean OH over the past 25 years. We find that increasing H2O and increasing width of the tropics tend to increase global mean OH, countering the increasing CH4 sink and resulting in well-buffered global tropospheric OH concentrations.

Purificação, modelagem e simulação da adsorção de bioprodutos por troca iônica em coluna de leito expandido

A produção de proteínas através de microrganismos tornou-se uma técnica muito importante na obtenção de compostos de interesse da indústria farmacêutica e alimentícia. Extratos brutos nos quais as proteínas são obtidas são geralmente complexos, contendo sólidos e células em suspensão. Usualmente, para uso industrial destes compostos, é necessário obtê-los puros, para garantir a sua atuação sem interferência. Um método que vem recebendo destaque especialmente nos últimos 10 anos é o uso da cromatografia de troca iônica em leito expandido, que combina em uma única etapa os passos de clarificação, concentração e purificação da molécula alvo, reduzindo assim o tempo de operação e também os custos com equipamentos para realização de cada etapa em separado. Combinado a este fato, a última década também é marcada por trabalhos que tratam da modelagem matemática do processo de adsorção de proteínas em resinas. Está técnica, além de fornecer informações importantes sobre o processo de adsorção, também é de grande valia na otimização da etapa de adsorção, uma vez que permite que simulações sejam feitas, sem a necessidade de gasto de tempo e material com experimentos em bancada, especialmente se é desejado uma ampliação de escala. Dessa forma, o objetivo desta tese foi realizar a modelagem e simulação do processo de adsorção de bioprodutos em um caldo bruto na presença de células, usando inulinase e C-ficocianina como objeto de estudo e purificar C-ficocianina utilizando resina de troca iônica em leito expandido. A presente tese foi então dividida em quatro artigos. O primeiro artigo teve como objeto de estudo a enzima inulinase, e a otimização da etapa de adsorção desta enzima em resina de troca iônica Streamline SP, em leito expandido, foi feita através da modelagem matemática e simulação das curvas de ruptura em três diferentes graus de expansão (GE). As máximas eficiências foram observadas quando utilizadas maiores concentrações de inulinase (120 a 170 U/mL), e altura de leito entre 20 e 30 cm. O grau de expansão de 3,0 vezes foi considerado o melhor, uma vez que a produtividade foi consideravelmente superior. O segundo artigo apresenta o estudo das condições de adsorção de C-ficocianina em resina de troca iônica, onde foi verificado o efeito do pH e temperatura na adsorção e após construída a isoterma de adsorção. A isoterma de adsorção da C-ficocianina em resina Streamline Q XL feita em pH 7,5 e a 25°C (ambiente), apresentou um bom ajuste ao modelo de Langmuir (R=0,98) e os valores qm (capacidade máxima de adsorção) e Kd (constante de equilíbrio) estimados pela equação linearizada da isoterma, foram de 26,7 mg/mL e 0,067mg/mL. O terceiro artigo aborda a modelagem do processo de adsorção de extrato não clarificado de C-ficocianina em resina de troca iônica Streamline Q XL em coluna de leito expandido. Três curvas de ruptura foram feitas em diferentes graus de expansão (2,0, 2,5 e 3,0). A condição de adsorção de extrato bruto não clarificado de C-ficocianina que se mostrou mais vantajosa, por apresentar maior capacidade de adsorção, é quando se alimenta o extrato até atingir 10% de saturação da resina, em grau de expansão 2,0, com uma altura inicial de leito de 30 cm. O último artigo originado nesta tese foi sobre a purificação de C-ficocianina através da cromatografia de troca iônica em leito expandido. Uma vez que a adsorção já havia sido estudada no artigo 2, o artigo 4 enfoca na otimização das condições de eluição, visando obter um produto com máxima pureza e recuperação. A pureza é dada pela razão entre a absorbância a 620 nm pela absorbância a 280 nm, e dizse que quando C-ficocianina apresenta pureza superior a 0,7 ela pode ser usada em como corante em alimentos. A avaliação das curvas de contorno indicou que a faixa de trabalho deve ser em pH ao redor de 6,5 e volumes de eluição próximos a 150 mL. Tais condições combinadas a uma etapa de pré-eluição com 0,1M de NaCl, permitiu obter C-ficocianina com pureza de 2,9, concentração 3 mg/mL, e recuperação ao redor de 70%.