Lost in Translation? Russian Media Portrayals and Laypersons’ Interpretations of Angelina Jolie’s Breast Cancer Discourse

In May 2013, Angelina Jolie revealed that because she had a family history of breast and ovarian cancer and carried a rare BRCA gene mutation, she had undergone a preventive double mastectomy. Media coverage has been extensive around the world, including in Russia, not an English-language country, where all global news is inevitably filtered by translation. After examining the reactions of Russian mass media and members of the public to Jolie’s disclosure, I consider what transformations have occurred with Jolie’s message in the process of cross-cultural transfer. I explore the mass media portrayal of Jolie’s announcement, laypersons’ immediate and prolonged reactions, and the reflections of patients involved directly in the field of hereditary breast cancer. To my knowledge, this multifaceted and bilingual project is the first conceptualization of Jolie’s story as it has been translated in a different sociocultural environment. I start with examination of offline and online publications that appeared in Russia within two months after Jolie’s announcement. In this part of my analysis, I conceptualize the representation of Jolie’s case in Russian mass media and grasp what sociocultural waves were generated by this case among general lay audiences. Another part of my study contains the results of qualitative in-depth interviews. Eight women with a family history of hereditary breast cancer were recruited to participate in the research. The findings represent Jolie’s case through the eyes of Russian women with the same gene mutation as Jolie. Consolidating my findings, I argue that Jolie’s announcement was misinterpreted and misrepresented by Russian mass media, as well as misunderstood by a considerable part of the media audience. Jolie’s perspective on hereditary breast cancer mostly remained unheard among members of the Russian public. I make suggestions about the reasons for such a phenomenon, and demonstrate how Jolie’s case is implicated in politics, economics, and the culture of contemporary Russia.

Essays on Firm Heterogeneity with Empirical Applications in Economic History and Agricultural Economics

This thesis uses models of firm-heterogeneity to complete empirical analyses in economic history and agricultural economics. In Chapter 2, a theoretical model of firm heterogeneity is used to derive a statistic that summarizes the welfare gains from the introduction of a new technology. The empirical application considers the use of mechanical steam power in the Canadian manufacturing sector during the late nineteenth century. I exploit exogenous variation in geography to estimate several parameters of the model. My results indicate that the use of steam power resulted in a 15.1 percent increase in firm-level productivity and a 3.0-5.2 percent increase in aggregate welfare. Chapter 3 considers various policy alternatives to price ceiling legislation in the market for production quotas in the dairy farming sector in Quebec. I develop a dynamic model of the demand for quotas with farmers that are heterogeneous in their marginal cost of milk production. The econometric analysis uses farm-level data and estimates a parameter of the theoretical model that is required for the counterfactual experiments. The results indicate that the price of quotas could be reduced to the ceiling price through a 4.16 percent expansion of the aggregate supply of quotas, or through moderate trade liberalization of Canadian dairy products. In Chapter 4, I study the relationship between farm-level productivity and participation in the Commercial Export Milk (CEM) program. I use a difference-in-difference research design with inverse propensity weights to test for causality between participation in the CEM program and total factor productivity (TFP). I find a positive correlation between participation in the CEM program and TFP, however I find no statistically significant evidence that the CEM program affected TFP.

Perspectives of Teachers Regarding the Integration of Mathematics and Science at the Secondary School Level

The integration of mathematics and science in secondary schools in the 21st century continues to be an important topic of practice and research. The purpose of my research study, which builds on studies by Frykholm and Glasson (2005) and Berlin and White (2010), is to explore the potential constraints and benefits of integrating mathematics and science in Ontario secondary schools based on the perspectives of in-service and pre-service teachers with various math and/or science backgrounds. A qualitative and quantitative research design with an exploratory approach was used. The qualitative data was collected from a sample of 12 in-service teachers with various math and/or science backgrounds recruited from two school boards in Eastern Ontario. The quantitative and some qualitative data was collected from a sample of 81 pre-service teachers from the Queen’s University Bachelor of Education (B.Ed) program. Semi-structured interviews were conducted with the in-service teachers while a survey and a focus group was conducted with the pre-service teachers. Once the data was collected, the qualitative data were abductively analyzed. For the quantitative data, descriptive and inferential statistics (one-way ANOVAs and Pearson Chi Square analyses) were calculated to examine perspectives of teachers regardless of teaching background and to compare groups of teachers based on teaching background. The findings of this study suggest that in-service and pre-service teachers have a positive attitude towards the integration of math and science and view it as valuable to student learning and success. The pre-service teachers viewed the integration as easy and did not express concerns to this integration. On the other hand, the in-service teachers highlighted concerns and challenges such as resources, scheduling, and time constraints. My results illustrate when teachers perceive it is valuable to integrate math and science and which aspects of the classroom benefit best from the integration. Furthermore, the results highlight barriers and possible solutions to better the integration of math and science. In addition to the benefits and constraints of integration, my results illustrate why some teachers may opt out of integrating math and science and the different strategies teachers have incorporated to integrate math and science in their classroom.

Background Measurement Techniques and Sensitivity Studies for the SNO+ Neutrinoless Double Beta Decay Search

The control of radioactive backgrounds will be key in the search for neutrinoless double beta decay at the SNO+ experiment. Several aspects of the SNO+ back- grounds have been studied. The SNO+ tellurium purification process may require ultra low background ethanol as a reagent. A low background assay technique for ethanol was developed and used to identify a source of ethanol with measured 238U and 232Th concentrations below 2.8 10^-13 g/g and 10^-14 g/g respectively. It was also determined that at least 99:997% of the ethanol can be removed from the purified tellurium using forced air ow in order to reduce 14C contamination. In addition, a quality-control technique using an oxygen sensor was studied to monitor 222Rn contamination due to air leaking into the SNO+ scintillator during transport. The expected sensitivity of the technique is 0.1mBq/L or better depending on the oxygen sensor used. Finally, the dependence of SNO+ neutrinoless double beta decay sensitivity on internal background levels was studied using Monte Carlo simulation. The half-life limit to neutrinoless double beta decay of 130Te after 3 years of operation was found to be 4.8 1025 years under default conditions.

Implementing the Physical Literacy Component of the 2015 Ontario Health and Physical Education Curriculum: Is the Stage Set?

Introduction: Current physical activity levels among children and youth are alarmingly low; a mere 7% of children and youth are meeting the Canadian Physical Activity Guidelines (Colley et al., 2011), which means that the vast majority of this population is at risk of developing major health problems in adulthood (Janssen & Leblanc, 2010). These high inactivity rates may be related to suboptimal experiences in sport and physical activity stemming from a lack of competence and confidence (Lubans, Morgan, Cliff, Barnett, & Okely, 2010). Developing a foundation of physical literacy can encourage and maintain lifelong physical activity, yet this does not always occur naturally as a part of human growth (Hardman, 2011). An ideal setting to foster the growth and development of physical literacy is physical education class. Physical education class can offer all children and youth an equal opportunity to learn and practice the skills needed to be active for life (Hardman, 2011). Elementary school teachers are responsible for delivering the physical education curriculum, and it is important to understand their will and capacity as the implementing agents of physical literacy development curriculum (McLaughlin, 1987). Purpose: The purpose of this study was to explore the physical literacy component of the 2015 Ontario Health and Physical Education curriculum policy through the eyes of key informants, and to explore the resources available for the implementation of this new policy. Methods: Qualitative interviews were conducted with seven key informants of the curriculum policy development, including two teachers. In tandem with the interviews, a resource inventory and curriculum review were conducted to assess the content and availability of physical literacy resources. All data were analyzed through the lens of Hogwood and Gunn’s (1984) 10 preconditions for policy implementation. Results: Participants discussed how implementation is affected by: accountability, external capacity, internal capacity, awareness and understanding of physical literacy, implementation expertise, and policy climate. Discussion: Participants voiced similar opinions on most issues, and the overall lack of attention given to physical education programs in schools will continue to be a major dilemma when trying to combat such high physical inactivity levels.

The syntheses and characterization of nickel complexes; investigation of Ni(dppp)2 and [NiX(dppp)n]x, potentially catalytically active nickel(0)/(I) species for cross-coupling reactions

This thesis describes an investigation in which we compare Ni(0), Ni(I) and Ni(II) complexes containing 1,3-bis(diphenylphosphino)propane (dppp) as a phosphine ligand for their abilities to effect three types of cross-coupling reactions: Buchwald-Hartwig Amination, Heck-Mizoroki, and Suzuki-Miyaura cross-coupling reactions with different types of substrates. The Ni(0) complex Ni(dppp)2 is known and we have synthesized it via a new procedure involving zinc reduction of the known NiCl2(dppp) in the presence of an excess of dppp. The Ni(0) complex was characterized by NMR spectroscopy and X-ray crystallography. Since Ni(I) complexes of dppp seem unknown, we have synthesized what at this stage appear to be NiXdpppn/[NiX(dppp)n]x (X = Cl, Br, I; n = 1,2, x = 1, 2) by comproportionation of molar equivalents of Ni(dppp)2 and NiX2dppp, X= Cl, Br, I.

Tight-Binding Approximations in 1D and 2D Coupled-Cavity Photonic Crystal Structures

Light confinement and controlling an optical field has numerous applications in the field of telecommunications for optical signals processing. When the wavelength of the electromagnetic field is on the order of the period of a photonic microstructure, the field undergoes reflection, refraction, and coherent scattering. This produces photonic bandgaps, forbidden frequency regions or spectral stop bands where light cannot exist. Dielectric perturbations that break the perfect periodicity of these structures produce what is analogous to an impurity state in the bandgap of a semiconductor. The defect modes that exist at discrete frequencies within the photonic bandgap are spatially localized about the cavity-defects in the photonic crystal. In this thesis the properties of two tight-binding approximations (TBAs) are investigated in one-dimensional and two-dimensional coupled-cavity photonic crystal structures We require an efficient and simple approach that ensures the continuity of the electromagnetic field across dielectric interfaces in complex structures. In this thesis we develop \textrm{E} -- and \textrm{D} --TBAs to calculate the modes in finite 1D and 2D two-defect coupled-cavity photonic crystal structures. In the \textrm{E} -- and \textrm{D} --TBAs we expand the coupled-cavity \overrightarrow{E} --modes in terms of the individual \overrightarrow{E} -- and \overrightarrow{D} --modes, respectively. We investigate the dependence of the defect modes, their frequencies and quality factors on the relative placement of the defects in the photonic crystal structures. We then elucidate the differences between the two TBA formulations, and describe the conditions under which these formulations may be more robust when encountering a dielectric perturbation. Our 1D analysis showed that the 1D modes were sensitive to the structure geometry. The antisymmetric \textrm{D} mode amplitudes show that the \textrm{D} --TBA did not capture the correct (tangential \overrightarrow{E} --field) boundary conditions. However, the \textrm{D} --TBA did not yield significantly poorer results compared to the \textrm{E} --TBA. Our 2D analysis reveals that the \textrm{E} -- and \textrm{D} --TBAs produced nearly identical mode profiles for every structure. Plots of the relative difference between the \textrm{E} and \textrm{D} mode amplitudes show that the \textrm{D} --TBA did capture the correct (normal \overrightarrow{E} --field) boundary conditions. We found that the 2D TBA CC mode calculations were 125-150 times faster than an FDTD calculation for the same two-defect PCS. Notwithstanding this efficiency, the appropriateness of either TBA was found to depend on the geometry of the structure and the mode(s), i.e. whether or not the mode has a large normal or tangential component.

Wind Shear, Gust, and Yaw-Induced Dynamic Stall on Wind-Turbine Blades

This study examined the effect of a spanwise angle of attack gradient on the growth and stability of a dynamic stall vortex in a rotating system. It was found that a spanwise angle of attack gradient induces a corresponding spanwise vorticity gradient, which, in combination with spanwise flow, results in a redistribution of circulation along the blade. Specifically, when modelling the angle of attack gradient experienced by a wind turbine at the 30% span position during a gust event, the spanwise vorticity gradient was aligned such that circulation was transported from areas of high circulation to areas of low circulation, increasing the local dynamic stall vortex growth rate, which corresponds to an increase in the lift coefficient, and a decrease in the local vortex stability at this point. Reversing the relative alignment of the spanwise vorticity gradient and spanwise flow results in circulation transport from areas of low circulation generation to areas of high circulation generation, acting to reduce local circulation and stabilise the vortex. This circulation redistribution behaviour describes a mechanism by which the fluctuating loads on a wind turbine are magnified, which is detrimental to turbine lifetime and performance. Therefore, an understanding of this phenomenon has the potential to facilitate optimised wind turbine design.

An Investigation of the Features and Effectiveness of the Full-Day Early Learning Kindergarten Program in Ontario

This dissertation includes two studies. Study 1 is a qualitative case study that describes enactment of the main components of a high fidelity Full-Day Early Learning Kindergarten (FDELK) classroom, specifically play-based learning and teacher-ECE collaboration. Study 2 is a quantitative analysis that investigates how effectively the FDELK program promotes school readiness skills, namely self-regulation, literacy, and numeracy, in Kindergarteners. To describe the main components of an FDELK classroom in Study 1, a sub-sample of four high fidelity case study schools were selected from a larger case study sample. Interview data from these schools’ administrators, educators, parents, and community stakeholders were used to describe how the main components of the FDELK program enabled educators to meet the individual needs of students and promote students’ SR development. In Study 2, hierarchical regression analyses of 32,207 students’ self-regulation, literacy, and numeracy outcomes using 2012 Ontario Early Development Instrument (EDI) data revealed essentially no benefit for students participating in the FDELK program when compared to peers in Half-Day or Alternate-Day Kindergarten programs. Being older and female predicted more positive SR and literacy outcomes. Age and gender accounted for limited variance in numeracy outcomes. Results from both studies suggest that the Ontario Ministry of Education should take steps to improve the quality of the FDELK program by incorporating evidence-based guidelines and goals for play, reducing Kindergarten class sizes to more effectively scaffold learning, and revising curriculum expectations to include a greater focus on SR, literacy, and numeracy skills.

Synthesis, Modification, and Application of Siloxane Materials for Environmental Sensing

As human populations and resource consumption increase, it is increasingly important to monitor the quality of our environment. While laboratory instruments offer useful information, portable, easy to use sensors would allow environmental analysis to occur on-site, at lower cost, and with minimal operator training. We explore the synthesis, modification, and applications of modified polysiloxane in environmental sensing. Multiple methods of producing modified siloxanes were investigated. Oligomers were formed by using functionalized monomers, producing siloxane materials containing silicon hydride, methyl, and phenyl side chains. Silicon hydride-functionalized oligomers were further modified by hydrosilylation to incorporate methyl ester and naphthyl side chains. Modifications to the siloxane materials were also carried out using post-curing treatments. Methyl ester-functionalized siloxane was incorporated into the surface of a cured poly(dimethylsiloxane) film by siloxane equilibration. The materials containing methyl esters were hydrolyzed to reveal carboxylic acids, which could later be used for covalent protein immobilization. Finally, the siloxane surfaces were modified to incorporate antibodies by covalent, affinity, and adsorption-based attachment. These modifications were characterized by a variety of methods, including contact angle, attenuated total reflectance Fourier transform infrared spectroscopy, dye labels, and 1H nuclear magnetic resonance spectroscopy. The modified siloxane materials were employed in a variety of sensing schemes. Volatile organic compounds were detected using methyl, phenyl, and naphthyl-functionalized materials on a Fabry-Perot interferometer and a refractometer. The Fabry-Perot interferometer was found to detect the analytes upon siloxane extraction by deformation of the Bragg reflectors. The refractometer was used to determine that naphthyl-functionalized siloxanes had elevated refractive indices, rendering these materials more sensitive to some analytes. Antibody-modified siloxanes were used to detect biological analytes through a solid phase microextraction-mediated enzyme linked immunosorbent assay (SPME ELISA). The SPME ELISA was found to have higher analyte sensitivity compared to a conventional ELISA system. The detection scheme was used to detect Escherichia coli at 8500 CFU/mL. These results demonstrate the variety of methods that can be used to modify siloxanes and the wide range of applications of modified siloxanes has been demonstrated through chemical and biological sensing schemes.

Computational models for improved diagnosis and prognosis of stroke using robot-based biomarkers

Stroke is a leading cause of death and permanent disability worldwide, affecting millions of individuals. Traditional clinical scores for assessment of stroke-related impairments are inherently subjective and limited by inter-rater and intra-rater reliability, as well as floor and ceiling effects. In contrast, robotic technologies provide objective, highly repeatable tools for quantification of neurological impairments following stroke. KINARM is an exoskeleton robotic device that provides objective, reliable tools for assessment of sensorimotor, proprioceptive and cognitive brain function by means of a battery of behavioral tasks. As such, KINARM is particularly useful for assessment of neurological impairments following stroke. This thesis introduces a computational framework for assessment of neurological impairments using the data provided by KINARM. This is done by achieving two main objectives. First, to investigate how robotic measurements can be used to estimate current and future abilities to perform daily activities for subjects with stroke. We are able to predict clinical scores related to activities of daily living at present and future time points using a set of robotic biomarkers. The findings of this analysis provide a proof of principle that robotic evaluation can be an effective tool for clinical decision support and target-based rehabilitation therapy. The second main objective of this thesis is to address the emerging problem of long assessment time, which can potentially lead to fatigue when assessing subjects with stroke. To address this issue, we examine two time reduction strategies. The first strategy focuses on task selection, whereby KINARM tasks are arranged in a hierarchical structure so that an earlier task in the assessment procedure can be used to decide whether or not subsequent tasks should be performed. The second strategy focuses on time reduction on the longest two individual KINARM tasks. Both reduction strategies are shown to provide significant time savings, ranging from 30% to 90% using task selection and 50% using individual task reductions, thereby establishing a framework for reduction of assessment time on a broader set of KINARM tasks. All in all, findings of this thesis establish an improved platform for diagnosis and prognosis of stroke using robot-based biomarkers.

Paleoecology, Diagenesis and Biological Affinity of Tetradiids in the Upper Ordovician (Sandbian) Black River Group of the Kingston Area, Ontario, Canada

Tetradiids are a group of colonial, tubular fossils that occur globally in Middle to Upper Ordovician strata. Tetradiids were first described as a type of tabulate coral; however, based on their four-fold symmetry, division, and presence of a central-sparry canal, they were recently reinterpreted as a florideophyte rhodophyte algae, a reinterpretation that is tested in this thesis. This study focused on understanding the affinity and taphonomy of this order of fossil. Research was conducted by stratigraphic and petrographic analyses of the Black River Group in the Kingston, Ontario region. Tetradiid occurrences were divided into fragment or colonial, with three morphologies of tetradiids described (Tetradium, Phytopsis and Paratetradium). Morphology is specific to depositional environment, with compact Tetradium consistently within ooid grainstones and open branching Phytopsis and chained Paratetradium consistently within mudstones. Two types of patch reefs were recognized: a Paratetradium bioherm, and a Paratetradium, Phytopsis, stromatolite bioherm. The presence of bioherms implies that tetradiids were capable of hypercalcifying. Preservation styles of tetradiids were investigated, and were compared to brachiopods, echinoderms, mollusks, and ooids. Tetradiids were preferentially preserved as molds and demonstrated complete dissolution of skeletal material. Rare specimens, however, demonstrated preserved horizontal partitions, central plates, and a double wall. Skeletal molds were filled with either calcite spar, mud or encrusted by a cryptomicrobial colony. Both calcitic and aragonitic ooids were discovered. The co-occurrence of aragonitic ooids, aragonitic crytodontids, and the evolution of aragonitic, hypercalcifying tetradiids is interpreted as representing the geochemical favoring of aragonite and HMC in a time of global calcite seas. The geochemical favoring of aragonite is interpreted to be independent to global Mg: Ca ratios, but was the result of increased saturation levels and temperature driven by high atmospheric pCO2. Based on the presence of epitheca, tabulae, septa, and the commonality of growth forms, tetradiids are interpreted as an order of Cnidaria. The evolution of an aragonitic skeleton in tetradiids is interpreted to be the result of de novo acquisition of a skeleton from an unmineralized clade.

Everyday Enchantments and Secular Magic in Montréal

In this thesis I argue that dominant ways of imagining modernity constitute a modern imaginary that carries with it particular expectations concerning modern places, spaces, emotions, and affects as well as expectations concerning the place of religion and enchantment in the modern world. I argue that this modern imaginary and the expectations it entails works to conceal and trivialize supra-rational beliefs and behaviours in scholarship but also in the lives of individuals. I focus on one particular subset of the supra-rational beliefs and behaviours that modern imaginary conceals and trivializes, namely beliefs and behaviours associated with lucky and protective objects. I also focus on the ways the modern imaginary conceals the presence and prevalence of these objects and the beliefs and behaviours they entail in one particular context, namely Montréal, Québec. I argue that these supra-rational beliefs and behaviours constitute a subjunctive mode for understanding and experiencing daily life and describe how the modern imaginary works to discredit this subjunctive register. Finally, I argue that scholars must begin to recognize and examine this subjunctive mode and the playful engagement with half-belief it involves.

Sandcastles of hope? Civil society organizations and the working conditions of migrant farmworkers in North America

This research explores whether civil society organizations (CSOs) can contribute to more effectively regulating the working conditions of temporary migrant farmworkers in North America. This dissertation unfolds in five parts. The first part of the dissertation sets out the background context. The context includes the political economy of agriculture and temporary migrant labour more broadly. It also includes the political economy of the legal regulations that govern immigration and work relations. The second part of the research builds an analytical model for studying the operation of CSOs active in working with the migrant farmworker population. The purpose of the analytical framework is to make sense of real-world examples by providing categories for analysis and a means to get at the channels of influence that CSOs utilize to achieve their aims. To this end, the model incorporates the insights from three significant bodies of literature—regulatory studies, labour studies, and economic sociology. The third part of the dissertation suggests some key strategic issues that CSOs should consider when intervening to assist migrant farmworkers, and also proposes a series of hypotheses about how CSOs can participate in the regulatory process. The fourth part probes and extends these hypotheses by empirically investigating the operation of three CSOs that are currently active in assisting migrant farm workers in North America: the Agricultural Workers Alliance (Canada), Global Workers’ Justice Alliance (USA), and the Coalition of Immokalee Workers (USA). The fifth and final part draws together lessons from the empirical work and concluded that CSOs can fill gaps left by the waning power of actors, such as trade unions and labour inspectorates, as well as act in ways that these traditional actors can not.

Development of a Mechanism and Process to Continuously Produce Spherical, Torrefied Biomass

Thesis (Master, Mechanical and Materials Engineering) -- Queen's University, 2016-06-17 02:15:25.215