Reconsideration of the catalytic center and mechanism of mammalian paraoxonase/arylesterase.

For three decades, mammalian paraoxonase (A-esterase, aromatic esterase, arylesterase; PON, EC 3.1.8.1) has been thought to be a cysteine esterase demonstrating structural and mechanistic homologies with the serine esterases (cholinesterases and carboxyesterases). Human, mouse, and rabbit PONs each contain only three cysteine residues, and their positions within PON have been conserved. In purified human PON, residues Cys-41 and Cys-352 form an intramolecular disulfide bond and neither could function as an active-center cysteine. Highly purified, enzymatically active PON contains a single titratable sulfhydryl group. Thus, Cys-283 is the only probable candidate for an active-center cysteine. Through site-directed mutagenesis of the human cDNA, Cys-283 was replaced with either serine (C283S) or alanine (C283A). The expressed C283 (wild-type) enzyme was inactivated by para-hydroxymercuribenzoate, but the C283S and C283A mutant enzymes were not inactivated. C283A and C283S mutant enzymes retained both paraoxonase and arylesterase activities, and the Km values for paraoxon and phenyl acetate were similar to those of the wild type. Clearly, residue Cys-283 is free in active PON, but a free sulfhydryl group is not required for either paraoxonase or arylesterase activities. Consequently, it is necessary to examine other models for the active-site structure and catalytic mechanism of PON.

Expression cloning of a cDNA encoding a fish prolactin receptor.

By using an expression cloning strategy, we isolated a single positive clone encoding a tilapia prolactin (PRL) receptor. Tilapia PRL188 was used to screen a freshwater tilapia kidney expression library transfected in COS cells. The tilapia PRL receptor is a mature protein of 606 amino acids. The extracellular domain is devoid of the tandem repeat units present in birds and has two pairs of cysteine residues, a Trp-Ser-Xaa-Trp-Ser motif, and two potential N-glycosylation sites. The cytoplasmic domain contains 372 amino acids, including box 1, a sequence previously shown to be important for signal transduction in mammalian species. Thus, the general structure is similar to the long form of mammalian PRL receptors; however, amino acid comparisons reveal a rather low identity (approximately 37%). Northern blot analysis shows the existence of a single transcript in osmoregulatory tissues and reproductive organs. This localization is in agreement with known functions of PRL in teleosts.

Structural interpretation of the mutations in the beta-cardiac myosin that have been implicated in familial hypertrophic cardiomyopathy.

In 10-30% of hypertrophic cardiomyopathy kindreds, the disease is caused by > 29 missense mutations in the cardiac beta-myosin heavy chain (MYH7) gene. The amino acid sequence similarity between chicken skeletal muscle and human beta-cardiac myosin and the three-dimensional structure of the chicken skeletal muscle myosin head have provided the opportunity to examine the structural consequences of these naturally occurring mutations in human beta-cardiac myosin. This study demonstrates that the mutations are related to distinct structural and functional domains. Twenty-four are clustered around four specific locations in the myosin head that are (i) associated with the actin binding interface, (ii) around the nucleotide binding site, (iii) adjacent to the region that connects the two reactive cysteine residues, and (iv) in close proximity to the interface of the heavy chain with the essential light chain. The remaining five mutations are in the myosin rod. The locations of these mutations provide insight into the way they impair the functioning of this molecular motor and also into the mechanism of energy transduction.

Twists, knots, and rings in proteins: Structural definition of the cyclotide framework

In recent years an increasing number of miniproteins containing an amide-cyclized backbone have been discovered. The cyclotide family is the largest group of such proteins and is characterized by a circular protein backbone and six conserved cysteine residues linked by disulfide bonds in a tight core of the molecule. These form a cystine knot in which an embedded ring formed by two of the disulfide bonds and the connecting backbone segment is threaded by a third disulfide bond. In the current study we have undertaken high resolution structural analysis of two prototypic cyclotides, kalata B1 and cycloviolacin O1, to define the role of the conserved residues in the sequence. We provide the first comprehensive analysis of the topological features in this unique family of proteins, namely rings (a circular backbone), twists (a cis-peptide bond in the Mobius cyclotides) and knots (a knotted arrangement of the disulfide bonds).

Variations in cyclotide expression in Viola species

Cyclotides, a family of approximately 50 mini-proteins isolated from various Violaceae and Rubiaceae plants, are characterized by their circular peptide backbone and six conserved cysteine residues arranged in a cystine knot motif. Cyclotides show a wide range of biological activities, making them interesting targets for both pharmaceutical and agrochemical research, but little is known about their natural function and the events that trigger their expression. An investigation of the geographical and seasonal variations of cyclotide profiles has been performed, using the native Australian violet, Viola hederacea, and the Swedish sweet violet, Viola odorata, as model plants. The results showed that in the Australian violet the relative peptide levels of some cyclotides remained almost constant throughout the year, while other cyclotides were present only at certain times of the year. Therefore, it appears that V. hederacea expresses a basic armory of cyclotides as well as special add-ons whose levels are influenced by external factors. In the Swedish violet, cyclotide levels were increased up to 14 times during the warmest period of the year. The larger variation in expression levels of the Swedish plants may be a reflection of a greater climatic variation.

Nitric oxide donors inhibit 5-hydroxytryptamine (5-HT) uptake by the human 5-HT transporter (SERT)

1 The aim was to test the hypothesis that nitric oxide ( NO) donor drugs can inhibit the 5-hydroxytryptamine (5-HT) transporter, SERT. 2 The NO donors, MAHMA/NO ( a NONOate; (Z)-1-[N-methyl-N-[6-(N-methylammoniohexyl)amino]]diazen- 1-ium-1,2-diolate), SIN-1 ( a sydnonimine; 5-amino-3-(4-morpholinyl)-1,2,3-oxadiazolium chloride), FK409 ( an oxime; (+/-)-(4-ethyl-2E-(hydroxyimino)-5-nitro-3E-hexenamide)) and peroxynitrite, but not Angeli's salt ( source of nitroxyl anion) or sodium nitrite, caused concentration-dependent inhibition of the specific uptake of [H-3]- 5-HT in COS-7 cells expressing human SERT. 3 Superoxide dismutase (150 U ml(-1)) plus catalase ( 1200 U ml(-1)), used to remove superoxide and hence prevent peroxynitrite formation, prevented the inhibitory effect of SIN-1 ( which generates superoxide) but not of MAHMA/NO or FK409. 4 The inhibitory effects of the NO donors were not affected by the free radical scavenger, hydroxocobalamin (1 mM) or the guanylate cyclase inhibitor, ODQ (1H-[ 1,2,4] oxadiazolo[4,3-a] quinoxalin-1-one; 3 muM). 5 L-Cysteine ( 1 mM; source of excess thiol residues) abolished or markedly reduced the inhibitory effects of MAHMA/NO, SIN-1, FK409 and peroxynitrite. 6 It is concluded that inhibition of SERT by the NO donors cannot be attributed exclusively to NO free radical nor to nitroxyl anion. It does not involve guanosine-3',5'-cyclic monophosphate, but may involve nitrosation of cysteine residues on the SERT protein. Peroxynitrite mediates the effect of SIN-1, but not the other drugs. 7 Data in mice with hypoxic pulmonary hypertension suggest that SERT inhibitors may attenuate pulmonary vascular remodelling. Thus, NO donors may be useful in pulmonary hypertension, not only as vasodilators, but also because they inhibit SERT, provided they display this effect in vivo at appropriate doses.

Structure-function studies of the plant cyclotides: The role of a circular protein backbone

The traditional idea of proteins as linear chains of amino acids is being challenged with the discovery of miniproteins that contain a circular backbone. The cyclotide family is the largest group of circular proteins and is characterized by an amide-circularized protein backbone and six conserved cysteine residues. These conserved cysteines are paired to form a knotted network of disulfide bonds. The combination of the circular backbone and a cystine knot, known as the cyclic cystine knot (CCK) motif, confers exceptional stability upon the cyclotides. This review discusses the role of the circular backbone based on studies of both the oxidative folding of kalata B1, the prototypical cyclotide, and a comparison of the structure and activity of kalata B1 and its acyclic permutants.

Structures of mu O-conotoxins from Conus marmoreus - Inhibitors of tetrodotoxin (TTX)-sensitive and TTX-resistant sodium channels in mammalian sensory neurons

The muO-conotoxins are an intriguing class of conotoxins targeting various voltage-dependent sodium channels and molluscan calcium channels. In the current study, we have shown MrVIA and MrVIB to be the first known peptidic inhibitors of the transient tetrodotoxin-resistant (TTX-R) Na+ current in rat dorsal root ganglion neurons, in addition to inhibiting tetrodotoxin-sensitive Na+ currents. Human TTX-R sodium channels are a therapeutic target for indications such as pain, highlighting the importance of the muO-conotoxins as potential leads for drug development. Furthermore, we have used NMR spectroscopy to provide the first structural information on this class of conotoxins. MrVIA and MrVIB are hydrophobic peptides that aggregate in aqueous solution but were solubilized in 50% acetonitrile/water. The three-dimensional structure of MrVIB consists of a small beta-sheet and a cystine knot arrangement of the three-disulfide bonds. It contains four backbone loops between successive cysteine residues that are exposed to the solvent to varying degrees. The largest of these, loop 2, is the most disordered part of the molecule, most likely due to flexibility in solution. This disorder is the most striking difference between the structures of MrVIB and the known delta- and omega-conotoxins, which along with the muO-conotoxins are members of the O superfamily. Loop 2 of omega-conotoxins has previously been shown to contain residues critical for binding to voltage-gated calcium channels, and it is interesting to speculate that the flexibility observed in MrVIB may accommodate binding to both sodium and molluscan calcium channels.

NmlR of Neisseria gonorrhoeae: a novel redox responsive transcription factor from the MerR family

A MerR-like regulator (NmlR -Neisseria merR-like Regulator) identified in the Neisseria gonorrhoeae genome lacks the conserved cysteines known to bind metal ions in characterized proteins of this family. Phylogenetic analysis indicates that NmlR defines a subfamily of MerR-like transcription factors with a distinctive pattern of conserved cysteines within their primary structure. NmlR regulates itself and three other genes in N. gonorrhoeae encoding a glutathione-dependent dehydrogenase (AdhC), a CPx-type ATPase (CopA) and a thioredoxin reductase (TrxB). An nmlR mutant lacked the ability to survive oxidative stress induced by diamide and cumene hydroperoxide. It also had > 50-fold lower NADH-S-nitrosoglutathione oxidoreductase activity consistent with a role for AdhC in protection against nitric oxide stress. The upstream sequences of the NmlR regulated genes contained typical MerR-like operator/promoter arrangements consisting of a dyad symmetry located between the -35 and -10 elements of the target genes. The NmlR target operator/promoters were cloned into a beta-galactosidase reporter system and promoter activity was repressed by the introduction of NmlR in trans. Promoter activity was activated by NmlR in the presence of diamide. Under metal depleted conditions NmlR did not repress P-AdhC (or P-CopA) promoter activity, but this was reversed in the presence of Zn(II), indicating repression was Zn(II)-dependent. Analysis of mutated promoters lacking the dyad symmetry revealed constitutive promoter activity which was independent of NmlR. Gel shift assays further confirmed that NmlR bound to the target promoters possessing the dyad symmetry. Site-directed mutagenesis of the four NmlR cysteine residues revealed that they were essential for activation of gene expression by NmlR.

The role of disulfide bonds in the structure and function of murine epidermal growth factor (mEGF)

A systematic study using solid phase peptide synthesis has been undertaken to examine the role of the disulfide bonds in the structure and function of mEGF. A combination of one, two and three native disulfide pair analogues of an active truncated (4-48) form of mEGF have been synthesised by replacing specific cysteine residues with isosteric alpha-amino-n-butyric acid (Abu). Oxidation of the peptides was performed using either conventional aerobic oxidation at basic pH, in DMSO under acidic conditions or via selective disulfide formation using orthogonal protection of the cysteine pairs. The contribution of individual, or pairs of, disulfide bonds to EGF structure was evaluated by CD and H-1-NMR spectroscopy. The mitogenic activity of each analogue was determined using Balb/c 3T3 mouse fibroblasts. As we have reported previously (Barnham et al. 1998), the disulfide bond between residues 6 and 20 can be removed with significant retention of biological activity (EC50 20-50 nM). The overall structure of this analogue was similar to that of native mEGF, indicating that the loss of the 6-20 disulfide bridge did not affect the global fold of the molecule. We now show that removal of any other disulfide bond, either singly or in pairs, results in a major disruption of the tertiary structure, and a large loss of activity (EC50>900 nM). Remarkably, the linear analogue appears to have greater activity (EC50 580 nM) than most one and two disulfide bond analogues although it does not have a definable tertiary structure.

Crystallization and preliminary X-ray analysis of a Kunitz-type inhibitor, textilinin-1 from Pseudonaja textilis textilis

Textilinin-1 (Txln-1), a Kunitz-type serine protease inhibitor, is a 59-amino-acid polypeptide isolated from the venom of the Australian Common Brown snake Pseudonaja textilis textilis. This molecule has been suggested as an alternative to aprotinin, also a Kunitz-type serine protease inhibitor, for use as an anti-bleeding agent in surgical procedures. Txln-1 shares only 47% amino-acid identity to aprotinin; however, six cysteine residues in the two peptides are in conserved locations. It is therefore expected that the overall fold of these molecules is similar but that they have contrasting surface features. Here, the crystallization of recombinant textilinin-1 (rTxln-1) as the free molecule and in complex with bovine trypsin (229 amino acids) is reported. Two organic solvents, phenol and 1,4-butanediol, were used as additives to facilitate the crystallization of free rTxln-1. Crystals of the rTxln-1-bovine trypsin complex diffracted to 2.0 angstrom resolution, while crystals of free rTxln-1 diffracted to 1.63 angstrom resolution.

Factors influencing the stability of cyclotides: Proteins with a circular backbone and cystine knot motif

Cyclotides are a large family of mini-proteins that have the distinguishing features of a head-to-tail cyclised backbone and a cystine knot formed by six conserved cysteine residues. They are present in plants from the Rubiaceae, Violaceae and Cucurbitaceae families. The unique structural features of the cyclotides make them extremely resistant to chemical, thermal and proteolytic degradation. In this article we review recent Studies from our laboratory that dissect the role of the individual structural elements in defining the stability of cyclotides. The resistance of cyclotides to chemical and proteolytic degradation is in large part due to the cystine knot, whereas the thermal stability is I composite of several features including the cystine knot, the cyclic backbone and the hydrogen bonding network. A range of biological activities of cyclotides is critically dependent oil the presence of the cyclic backbone.

Kalata B8, a novel antiviral circular protein, exhibits conformational flexibility in the cystine knot motif

The cyclotides are a family of circular proteins with a range of biological activities and potential pharmaceutical and agricultural applications. The biosynthetic mechanism of cyclization is unknown and the discovery of novel sequences may assist in achieving this goal. In the present study, we have isolated a new cyclotide from Oldenlandia affinis, kalata B8, which appears to be a hybrid of the two major subfamilies (Mobius and bracelet) of currently known cyclotides. We have determined the three-dimensional structure of kalata B8 and observed broadening of resonances directly involved in the cystine knot motif, suggesting flexibility in this region despite it being the core structural element of the cyclotides. The cystine knot motif is widespread throughout Nature and inherently stable, making this apparent flexibility a surprising result. Further-more, there appears to be isomerization of the peptide backbone at an Asp-Gly sequence in the region involved in the cyclization process. Interestingly, such isomerization has been previously characterized in related cyclic knottins from Momordica cochinchinensis that have no sequence similarity to kalata B8 apart from the six conserved cysteine residues and may result from a common mechanism of cyclization. Kalata B8 also provides insight into the structure-activity relationships of cyclotides as it displays anti-HIV activity but lacks haemolytic activity. The 'uncoupling' of these two activities has not previously been observed for the cyclotides and may be related to the unusual hydrophilic nature of the peptide.

Knots in rings - The circular knotted protein momordica cochinchinensis trypsin inhibitor-II folds via a stable two-disulfide intermediate

The aim of this work was to elucidate the oxidative folding mechanism of the macrocyclic cystine knot protein MCoTI-II. We aimed to investigate how the six-cysteine residues distributed on the circular backbone of the reduced unfolded peptide recognize their correct partner and join up to form a complex cystine-knotted topology. To answer this question, we studied the oxidative folding of the naturally occurring peptide using a range of spectroscopic methods. For both oxidative folding and reductive unfolding, the same disulfide intermediate species was prevalent and was characterized to be a native-like two-disulfide intermediate in which the Cys(1)-Cys(18) disulfide bond was absent. Overall, the folding pathway of this head-to-tail cyclized protein was found to be similar to that of linear cystine knot proteins from the squash family of trypsin inhibitors. However, the pathway differs in an important way from that of the cyclotide kalata B1, in that the equivalent two-disulfide intermediate in that case is not a direct precursor of the native protein. The size of the embedded ring within the cystine knot motif appears to play a crucial role in the folding pathway. Larger rings contribute to the independence of disulfides and favor an on-pathway native-like intermediate that has a smaller energy barrier to cross to form the native fold. The fact that macrocyclic proteins are readily able to fold to a complex knotted structure in vitro in the absence of chaperones makes them suitable as protein engineering scaffolds that have remarkable stability.

Molecular dynamics simulations of the hydrophobin SC3 at a hydrophobic/hydrophilic interface

Hydrophobins are small (similar to 100 aa) proteins that have an important role in the growth and development of mycelial fungi. They are surface active and, after secretion by the fungi, self-assemble into amphipathic membranes at hydrophobic/hydrophilic interfaces, reversing the hydrophobicity of the surface. In this study, molecular dynamics simulation techniques have been used to model the process by which a specific class I hydrophobin, SC3, binds to a range of hydrophobic/ hydrophilic interfaces. The structure of SC3 used in this investigation was modeled based on the crystal structure of the class II hydrophobin HFBII using the assumption that the disulfide pairings of the eight conserved cysteine residues are maintained. The proposed model for SC3 in aqueous solution is compact and globular containing primarily P-strand and coil structures. The behavior of this model of SC3 was investigated at an air/water, an oil/water, and a hydrophobic solid/water interface. It was found that SC3 preferentially binds to the interfaces via the loop region between the third and fourth cysteine residues and that binding is associated with an increase in a-helix formation in qualitative agreement with experiment. Based on a combination of the available experiment data and the current simulation studies, we propose a possible model for SC3 self-assembly on a hydrophobic solid/water interface.