Conical refraction with low-coherent light sources

We report on conical refraction (CR) experiments with low-coherent light sources such as light-emitting diodes (LEDs) that demonstrated different CR patterns. The change of a pinhole size from 25 to 100 μm reduced the spatial coherence of the LED radiation and resulted in the disappearance of the dark Poggendorf ring in the Lloyd's plane. This is attributed to the interference nature of the Lloyd's distribution and is found to be in excellent agreement with the paraxial dual-cone model of CR.

Aspects of Motives: Finite-dimensionality, Chow-Kunneth Decompositions and Intersections of Cycles

This thesis analyzes the Chow motives of 3 types of smooth projective varieties: the desingularized elliptic self fiber product, the Fano surface of lines on a cubic threefold and an ample hypersurface of an Abelian variety. For the desingularized elliptic self fiber product, we use an isotypic decomposition of the motive to deduce the Murre conjectures. We also prove a result about the intersection product. For the Fano surface of lines, we prove the finite-dimensionality of the Chow motive. Finally, we prove that an ample hypersurface on an Abelian variety possesses a Chow-Kunneth decomposition for which a motivic version of the Lefschetz hyperplane theorem holds.

Intersections: proceedings of the youth work and music education symposium

The ‘Intersections: Youth Work and Music Education’ Symposium took place on Friday, 27th June 2014 in University College Cork. This event, held in association with the Institute of Social Sciences in the 21st Century (ISS21), was made possible thanks to funding from UCC’s Strategic Research Fund. The principle aim of this seed funding is to generate new research interests and this presented the ideal opportunity for developing collaborative relationships between youth work and music education lecturers, researchers and practitioners across the island of Ireland. This led to the formation of a new ‘Intersections’ research cluster, comprising representatives from four third-level institutions, each of which offers both youth work and music education undergraduate and/or postgraduate programmes, namely: University College Cork; National University of Ireland, Maynooth; Dundalk Institute of Technology; and, University of Ulster. This document presents some preliminary findings from primary research conducted through each of the participating institutions in their local areas. Data was also collected during the symposium, through engaging in small group discussions populated by the event’s participants. The publication and dissemination of this document was included in the original Strategic Research Fund proposal. Its intended audience includes youth workers, music educators, community-based practitioners, policy-makers and academics who are motivated and enthused by the possibilities of music-oriented youth work in Ireland and beyond.

Drawing in Duos: The Journeys and Intersections Collaboration Project Between Istanbul and Worcester

This paper focuses on a collaborative drawing project carried out between two undergraduate drawing courses, one in İstanbul and the other in Worcester, during the Fall 2015 semester. Duos -teams of two working remotely- took turns to work on the same drawing in correspondence for three months by means of communication and sharing the changing images on-line with one another. The project introduced a collaborative method of learning based on drawing, initiated cultural exchange and cooperation. The role of drawing in the project was critical due to the direct but gradual nature of transmitting meaning onto paper. Outcomes of this project consisted of a flexible and playful creation process for students making use of the element of chance. They sought alternate ways to finalize a drawing and experienced the benefits of artistic co-production. The project has the capacity to inspire artists, instructors and others interested in creative partnership in different disciplines and can be of value as an educational model.

Exploring the intersections of creative and academic life among Australian academic creative writing practitioners

Intersections of Gay and Bisexual Identity with Fatness

This thesis examines the intersections of gay and bisexual identity with body size, or fatness. Gay and bisexual identity and fatness are marginalized social identities that seem to be incompatible (Bond, 2013). While a sense of collective identity with the gay and bisexual community has been shown to be a protective factor against internalized homonegativity in gay and bisexual men (Halpin & Allen, 2004), the degree to which this protective factor persists for fat people in an anti-fat environment like the gay and bisexual community (Wrench & Knapp, 2008) has not been explored. This intersection of identities and anti-fat culture seemed to suggest there might be a relationship between fatness and internalized homophobia. Fatness did not moderate the relationship between sense of belonging to the gay and bisexual community and internalized homonegativity, but a significant positive relationship was found between belongingness to the gay and bisexual community and body shame.

Intersections: Music, Words, and Pictures Robin McCabe, host December 4, 2016

Concert Program

Calibration of design strength values of Wire and Arc Additive Manufacturing inclined bars and intersections

Although being studied only for few years, Wire and Arc Additive Manufacturing (WAAM) will become the predominant way of producing stainless-steel elements in a near-like future. The analysis and study of such elements has yet to be defined in a proper way, but the projects regarding this subject are innovating more and more thanks to the findings discovered by the latter. This thesis is focused on an initial stage on the analysis of mechanical and geometrical properties of such stainless-steel elements produced by MX3D laboratories in Amsterdam, and to perform a calibration of the design strength values by means of Annex D of Eurocode 0, which talks about the analysis of the semi-probabilistic safety factors, hence the definition of characteristic values. Moreover, after testing the stainless-steel specimens by means of strain gauges and after obtaining mechanical and geometrical properties, a statistical analysis of such properties and an evaluation of characteristic values is performed. After this, there is to execute the calibration of design strength values of WAAM inclined bars and intersections.

Eficiência do processo de recobrimento de sementes de brócolos recobertas com polímero em leito de jorro

Broccoli seeds were coated in a conical-cylindrical spouted bed with an aqueous suspension of hydroxy ethyl cellulose aiming to improve the seeds coating technique using a fluid-dynamic process. An experimental design was applied to investigate the effects of the operating variables: gas temperature, atomizing air pressure and suspension flow rate on the germination of the seeds and on the process efficiency. Results indicated that the operating variables affect both the coating process efficiency and the germination ability. However, the analysis didn t identify differences between the germination potential of coated and uncoated seeds. Coated seeds absorbed up to 10 percent less moisture than the uncoated ones, when the environment temperature and humidity were controlled over a period of time.

Proposição de um método de análise de movimentos de jogadores de tênis de campo a partir de vídeos televisivos = : Proposition of a method for tennis players motion analysis on broadcast videos

Universidade Estadual de Campinas . Faculdade de Educação Física

Induced spawning of the endangered Neotropical species Steindachneridion parahybae (Siluriformes: Pimelodidae)

The "surubim do Paraíba" (Steindachneridion parahybae) is a freshwater catfish endemic to the Paraíba do Sul River basin, Brazil. This species has been seriously threatened by environmental disturbances in the last several decades. Wild Steindachneridion parahybae males and females were collected in 2003 and taken to the hatchery of a power plant of the Companhia Energética de São Paulo (CESP). Steindachneridion parahybae broodstocks were artificially induced to reproduce in December 2003 using a combination of carp pituitary extract (CPE) and human chorionic gonadotropin (hCG). Oocytes and milt were stripped; the fertilized eggs were transferred to 60-liter conical incubators and hatched larvae distributed in nine horizontal trays. Exogenous feed was started just after yolk sac absorption. A high rate of cannibalism and photophobia were observed during the larval period, resulting in a 26% survival rate from larvae to fingerlings.

Distribuição de tensões em mini-implantes ortodônticos

O objetivo deste trabalho foi avaliar a distribuição de tensões na resina em contato com os filetes de roscas de mini-implantes cilíndricos e cônicos, submetidos à carga lateral e torção de inserção. Um modelo fotoelástico foi confeccionado com gelatina transparente, para simular o osso alveolar. O modelo foi observado com um polariscópio plano e fotografado antes e após a ativação dos mini-implantes com força lateral e de inserção. A aplicação de cargas laterais provocou momentos fletores nos mini-implantes, aparecimento de franjas isocromáticas ao longo dos filetes do corpo dos mini-implantes e no ápice. Quando foi aplicado o torque de inserção, verificou-se a concentração de tensões próxima ao ápice. Concluiu-se que: (1) o mini-implante cilíndrico apresentou maior concentração de tensões no ápice, e (2) o mini-implante cônico apresentou maior concentração de tensões nos filetes de rosca apicais.

Ichthyoplankton distribution and abundance in the northern Todos os Santos and Camamu Bays, Bahia State - Brazil

The occurrence, distribution and abundance of ichthyoplankton in Todos os Santos and Camamu Bays were analyzed based on four samplings (winter 2003, summer 2003, winter 2004 and summer 2005). Samples were obtained by surface horizontal hauls, using a 200-µm mesh conical-cylinder plankton net. The distribution and abundance of eggs indicate a remarkable seasonal and annual variation of spawning activity in the region, especially when the two summer campaigns are compared. In summer 2003 the highest quantitative values were recorded, especially for Camamu, where the maximum reached 106.56 eggs.m-3, with an overall average of 43.46 eggs.m-3 for the two areas. In summer 2005 values were relatively low, the overall average being 3.49 eggs.m-3. The larval taxonomic composition is characterized by the predominance of gobiids, with small variation from summer to winter. Considering all the campaigns and samplings undertaken in both areas, larvae of 11 families were identified: Engraulidae, Clupeidae, Mugilidae, Atherinopsidae, Hemiramphidae, Syngnathidae, Blenniidae, Carangidae, Gobiidae, Achiridae and Tetraodontidae.

Magnetic suspension of the rotor of a ventricular assist device of mixed flow type

This work presents results of preliminary studies concerning application of magnetic bearing in a ventricular assist device (VAD) being developed by Dante Pazzanese Institute of Cardiology-IDPC (Sao Paulo, Brazil). The VAD-IDPC has a novel architecture that distinguishes from other known VADs. In this, the rotor has a conical geometry with spiral impellers, showing characteristics that are intermediate between a centrifugal VAD and an axial VAD. The effectiveness of this new type of blood pumping principle was showed by tests and by using it in heart surgery for external blood circulation. However, the developed VAD uses a combination of ball bearings and mechanical seals, limiting the life for some 10 h, making impossible its long-term use or its use as an implantable VAD. As a part of development of an implantable VAD, this work aims at the replacement of ball bearings by a magnetic bearing. The most important magnetic bearing principles are studied and the magnetic bearing developed by Escola Politecnica of Sao Paulo University (EPUSP-MB) is elected because of its very simple architecture. Besides presenting the principle of the EPUSP-MB, this work presents one possible alternative for applying the EPUSP-MB in the IDPC-VAD.