Current status of the whitefly Aleurodicus dispersus as an invasive pest in the CapeVerte Islands

In the last three decades, the spiralling whitefly (Aleurodicus dispersus) has become an important international pest. The movement of plants and parts of plants (such as fruits) in international trade and tourism, and by natural dispersal, has favoured its introduction to new areas. In common with others whiteflies of economic importance, the immature and adult stages cause direct feeding damage by piercing and sucking of sap from foliage, and indirect damage following the accumulation all over host plants of honeydew and waxy flocculent material produced by the insects. Spiralling whitefly is a pest of tropical and subtropical crops, and highly polyphagous. Up to the 1970s, it had been recorded on 44 genera of plants, belonging to 26 botanical families (Mound & Halsey, 1978). This situation changed with the dispersal of the pest to new areas. Nowadays, the spiralling whitefly is one of the major pest of vegetable, ornamental and fruit crops around the globe (Lambkin, 1999). Important host crops include: banana (Musa sapientum), Citrus spp., coconut (Cocos nocifera), eggplant (Solanum melanogena), guava (Psidium guajava), Hibiscus rosa sinensis, Indian almond (Terminalia catappa), papya (Carica papaya), Rosa sp. and tomato (Lycopersicon esculentum) (Saminathan & Jayaraj, 2001). Spiralling whitefly has its origin in the tropical Americas, including Brazil. Although the pest has been recorded only once in Brasil, in the 1920s in the state of Bahia (Bondar, 1923), it now has official quarantine status because of its economic importance. In the Cape Verte Islands, on the West African coast, the pest was initially introduced in the first half of 2000; it has since become established, reaching urban, natural and agricultural areas of the islands that constitute the archipelago. Since then, the pest has been causing damage to many native plants, ornamentals and cultivated food crops (Anon., 2001; Monteiro, 2004). The present study was done in order to produce an inventory of the most common host plants of spiralling whitefly in this new habitat.

Chemical and physical properties of organic residues

Due to human activity, large amounts of organic residue are generated daily. Therefore, an adequate use in agricultural activities requires the characterization of the main properties. The chemical and physical characterization is important when planning the use and management of organic residue. In this study, chemical and physical properties of charcoal, coffee husk, pine-bark, cattle manure, chicken manure, coconut fiber, sewage sludge, peat, and vermiculite were determined. The following properties were analyzed: N-NH4+, N-N0(3)-, and total concentrations of N, P, S, K, Ca, Mg, Mn, Zn, Cu, and B, as well as pH, Electrical Conductivity (EC) and bulk density. Coffee husk, sewage sludge, chicken manure and cattle manure were generally richer in nutrients. The EC values of these residues were also the highest (0.08 - 40.6 dS m-1). Peat and sewage sludge had the highest bulky density. Sodium contents varied from 0 to 4.75 g kg-1, with the highest levels in chicken manure, cattle manure and sewage sludge. Great care must be taken when establishing proportions of organic residues in the production of substrates with coffee husk, cattle or chicken manure or sewage sludge in the calculation of the applied fertilizer quantity in crop fertilization programs.

Carbon in Humic Fractions of Organic Matter in Soil Treated with Organic Composts under Mango Cultivation

ABSTRACT Soil organic matter (SOM) plays a key role in maintaining the productivity of tropical soils, providing energy and substrate for the biological activity and modifying the physical and chemical characteristics that ensure the maintenance of soil quality and the sustainability of ecosystems. This study assessed the medium-term effect (six years) of the application of five organic composts, produced by combining different agro-industrial residues, on accumulation and chemical characteristics of soil organic matter. Treatments were applied in a long-term experiment of organic management of mango (OMM) initiated in 2005 with a randomized block design with four replications. Two external areas, one with conventional mango cultivation (CMM) and the other a fragment of regenerating Caatinga vegetation (RCF), were used as reference areas. Soil samples were collected in the three management systems from the 0.00-0.05, 0.05-0.10, and 0.10-0.20 m layers, and the total organic carbon content and chemical fractions of organic matter were evaluated by determining the C contents of humin and humic and fulvic acids. Organic compost application significantly increased the contents of total C and C in humic substances in the experimental plots, mainly in the surface layer. However, compost 3 (50 % coconut bagasse, 40 % goat manure, 10 % castor bean residues) significantly increased the level of the non-humic fraction, probably due to the higher contents of recalcitrant material in the initial composition. The highest increases from application of the composts were in the humin, followed by the fulvic fraction. Compost application increased the proportion of higher molecular weight components, indicating higher stability of the organic matter.

Plant regeneration from protoplast of Brazilian citrus cultivars

A procedure is described to regenerate plants from protoplasts of Brazilian citrus cultivars, after isolation, fusion and culture. Protoplasts were isolated from embryogenic cell suspension cultures and from leaf mesophyll of seedlings germinated in vitro. The enzyme solution for protoplast isolation was composed of mannitol (0.7 M), CaCl2 (24.5 mM), NaH2PO4 (0.92 mM), MES (6.15 mM), cellulase (Onozuka RS - Yakult, 1%), macerase (Onozuka R10 - Yakult, 1%) and pectolyase Y-23 (Seishin, 0.2%). Protoplast culture in liquid medium after chemical fusion lead to the formation of callus colonies further adapted to solid medium. Somatic embryo formation occurred spontaneously after two subcultures, on modified MT medium supplemented with 500 mg/L of malt extract. Well defined embryos were germinated in modified MT medium with addition of GA3 (2.0 muM) and malt extract (500 mg/L). Plant regeneration was also achieved by adventitious shoots obtained through direct organogenesis of not well defined embryos in modified MT medium with addition of malt extract (500 mg/L), BAP (1.32 muM), NAA (1.07 muM) and coconut water (10 mL/L). Plantlets were transferred to root medium. Rooted plants were transferred to a greenhouse for further adaptation and development.

In vitro organogenesis in watermelon cotyledons

The objective of this work was to study the in vitro organogenesis of Citrullus lanatus, by the induction of adventitious buds in cotyledon segments cultured in medium supplemented with cytokinin. Explants were collected from one, three and five-day-old in vitro germinated seedlings, considering the distal and proximal cotyledon regions. The data obtained showed that in vitro organogenesis of watermelon occurred with higher efficiency, when cotyledon segments from the proximal region collected from three-day-old seedlings were cultivated in medium MS, supplemented with BAP (1 mg L-1) and coconut water (10%). The histological study showed that the organogenesis occurs directly, without callus formation, on epidermal and subepidermal layers of the explants. Adventitious shoots were characterized by the development of shoot apical meristem and leaf primordia. The formation of protuberances, that do not develop into adventitious buds, was also observed.

Evaluation of substrates on the emergence of "araticum-de-terra-fria" (Annona emarginata (Schltdl.) H. Rainer) Seedlings

Choosing a substrate is the determinant factor for the seedling producer; thus, the aim of this study was to evaluate the effect of different types of substrates on the emergence of "araticum-de-terra-fria" (Annona emarginata (Schltdl.) H. Rainer) seedlings. The experiment was carried out in a greenhouse and the experimental design was in randomized blocks, with three treatments and five replicates of 72 seeds per plot. The treatments consisted of the following substrates: coconut fiber, vermiculite and Plantmax® Citrus. The number of emerged seedlings was weekly counted for 105 days. Data regarding seedling height were obtained, and the emergence velocity index and mean time, besides total emergence percentage and that over time were calculated. Results from total mean emergence percentage, seedling height, emergence velocity index (EVI), and mean emergence time (MET) were subjected to analysis of variance and means were compared by the Tukey's test at 5% significance. The curves concerning the emergence percentage over time were fit by the logistic growth equation for each treatment and the means of each parameter (A, B, C) were compared by the Duncan's test at 5% significance. The substrates vermiculite led to the highest values of emergence percentage differing from the PlantMax® Citrus, but not of the coconut fiber, however the vermiculite promoted seedling height in a shorter time; therefore, this substrate is recommended for the initial development of "araticum-de-terra-fria" (Annona emarginata (Schltdl.) H. Rainer) seedlings.

THE LYCHEE TREE PROPAGATION BY LAYERING

The aim of the study was to assess the influence of season and different substrates on rooting of air layers of lychee (Litchi chinensisSonn.) for the production of seedlings to ensure the formation of uniform and productive orchards. Air layers were done in plants of the Bengal cultivar using leafy and healthy woody branches, with about 0.010 to 0.015 m in diameter, in which were performed complete girdling with 0.020 m wide at a distance of 0.30 to 0.40 m below the apex. Then the branches were wrapped in moistened substrate. The layering was made at six times of theyear (January, March, May, July, September and November) and two substrates were used (coconut fiber and sphagnum) in a 6 x 2 factorial design in a randomized block with ten replicates. After 90 days, layers were separated from the matrix plant and evaluated for rooting and callus formation, root number, considering only the primary roots, length, area and volume of the roots, beyond the dry weight of roots and calluses. The months of January, March, September and November showed the best results for all analyzed variables related to rooting. With respect to the substrates, the only difference was in January and March to the root number and dry weight of roots, where the sphagnum showed the best results. The month of July was more conducive to the formation of calluses. The period between September and March was more suitable to the propagation of lychee, when there were rooting percentages above 90%, in addition to the formation of large amount of roots.

Determinação direta de selênio em água de coco e em leite de coco utilizando espectrometria de absorção atômica com atomização eletrotérmica em forno de grafite

Selenium is both essential and toxic to man and animals, depending on the concentration and the ingested form. Most fruits and vegetables are poor sources of selenium, but coconut can be a good selenium source. Samples were suspended (1 + 4 v/v) in a mixture of tertiary amines soluble in water (10% v/v CFA-C). This simple sample treatment avoided contamination and decreased the analysis time. The standard additions method was adopted for quantification. The action of the autosampler was improved by the presence of the amines mixture in the suspension. A Varian model AA-800 atomic absorption spectrometer equipped with a graphite furnace and a GTA 100 autosampler was used for selenium determination in coconut water and coconut milk. Background correction was performed by means of the Zeeman effect. Pyrolytically coated graphite tubes were employed. Using Pd as chemical modifier, the pyrolysis and the atomization temperatures were set at 1400 and 2200ºC, respectively. For six samples, the selenium concentration in coconut water varied from 6.5 to 21.0 mug L-1 and in coconut milk from 24.2 to 25.1 mug L-1. The accuracy of the proposed method was evaluated by an addition-recovery experiment and all recovered values are in the 99.5-102.3% range. The main advantage of the proposed method is that it can be directly applied without sample decomposition.

Aspectos práticos relacionados ao uso do Rincoforol, o feromônio de agregação da Broca-do-olho-do-coqueiro Rhynchophorus palmarum L. (Coleopterate: Curculionidae) no controle de pragas do coqueiro: análise de sua eficiência em campo

Rhynchophorol (6-Methyl-2-hepten-4-ol) is the major constituent of the aggregation pheromone of Rhynchophorus palmarum L. (Coleoptera: Curculionidae), which is released by males of this species. The racemic mixture has been produced in one step-simplified preparation. The pheromone is placed into ampoules and furnished to coconut farmers. In the field, traps baited with Rhynchophorol and pieces of sugarcane attract both males and females, reducing the population of R. palmarum. The best conditions for field application are showed.

Análise de ácidos graxos por eletroforese capilar utilizando detecção condutométrica sem contato

This article describes a novel approach to the separation of fatty acids ranging from 8 to 20 carbons using capillary electrophoresis with contactless conductivity detection. Complete separation of nine linear chain fatty acids (from C8:0 to C20:0) was achieved in 15 min under normal polarity operation. Limits of detection ranged from 35 to 319 µmol L-1 for C20:0 to C8:0, respectively. The optimized running electrolyte composition was 5.0 mmol L-1 phosphate buffer at pH 7, 4.0 mmol L-1 dimethyl-b-cyclodextrin, 2.0 mmol L-1 trimethyl-b-cyclodextrin, acetonitrile 50% (v/v), and methanol 20% (v/v). The applicability of the separation system was demonstrated by the analysis of coconut vegetable oil.

Tratamento de efluente da indústria de processamento de coco utilizando eletroflotação

Electroflotation (EF) with aluminum electrodes was applied in the treatment of Brazilian industrial coconut wastewater. The results show that EF with polarity inversion is a very good treatment when compared to others. The removal of pollutants in the wastewater after EF with polarity inversion was 96.3% of oils and grease, 99% of color and 66% of total organic carbon. Also, metal concentrations, turbidity and total solids were reduced.

Classificação de água de coco processada e natural por meio de HCA, PCA e teores de íons metálicos determinados por ICP OES

Inductively Coupled Plasma Optical Emission Spectrometry was used to determine Ca, Mg, Mn, Fe, Zn and Cu in samples of processed and natural coconut water. The sample preparation consisted in a filtration step followed by a dilution. The analysis was made employing optimized instrumental parameters and the results were evaluated using methods of Pattern Recognition. The data showed common concentration values for the analytes present in processed and natural samples. Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) indicated that the samples of different kinds were statistically different when the concentrations of all the analytes were considered simultaneously.

Desempenho de biomassas na adsorção de hidrocarbonetos leves em efluentes aquosos

Removal of hydrocarbons from aqueous effluents using biosorbents was investigated. The effluent was simulated by a dispersion of gasoline (simple hydrocarbons) in water. Corn-cob, wood powder, coconut mesocarp and sugar-cane bagasse were used as adsorbents and their performance verified by means of batch experiments performed in an agitated vessel. The influence of input variables such as hydrocarbon concentration, mass of biomass and agitation level on the adsorbents' capacity was studied by means of factorial design. The results indicated that, among the materials studied, coconut mesocarp and sugar-cane bagasse can be considered promising biomasses for treating aqueous effluents contaminated by hydrocarbons.

Estudo comparativo da eficiência da difenilcarbazida e do óleo de coco saponificado microemulsionados na inibição da corrosão de aço carbono

The effectiveness of microemulsions (ME) of saponified coconut oil (OCS-ME) and diphenylcarbazide (DC-ME) on a carbon steel corrosion inhibition process was evaluated using an electrochemical method of polarization resistance. The ME was prepared with OCS, butanol, kerosene and saline solutions. OCS-ME and DC-ME showed highest inhibitions effects (77% and 92%, respectively) at lower concentrations (0.5% and 0.48 - 0.50%, respectively). The surfactant OCS (in H2O) showed lower efficiency (63% at 0.20 - 0.25% concentration). The greatest inhibitory effect of DC-ME could be correlated with the chemical structure and the rich O/W ME system, which are very important for adsorption phenomena in interfacial ME systems.

Uso da casca de coco verde como adsorbente na remoção de metais tóxicos

Green coconut shells were treated with acid, base and hydrogen peroxide solutions for 3, 6, 12 and 24 h for removing toxic metals from synthetic wastewater. The removal of ions by the adsorbent treated with 0.1 mol L-1 NaOH/ 3h was 99.5% for Pb2+ and 97.9% for Cu2+. The removal of Cd2+, Ni2+, Zn2+, using adsorbent treated with 1.0 mol L-1 NaOH/3 h, was 98.5, 90.3 and 95.4%, respectively. Particle size, adsorbent concentration and adsorption kinetics were also studied. An adsorbent size of 60-99 mesh and a concentration of 30-40 g/L for 5 min exposure were satisfactory for maximum uptake of Pb2+, Ni2+, Cd2+, Zn2+ and Cu2+ and can be considered as promising parameters for treatment the aqueous effluents contaminated with toxic metals.