Contrasting magma types and timing of intrusion in the Permian layered mafic complex of Mont Collon (Western Alps, Valais, Switzerland): evidence from U/Pb zircon and 40Ar/39Ar amphibole dating

We have selected and dated three contrasting rock-types representative of the magmatic activity within the Permian layered mafic complex of Mont Collon, Austroalpine Dent Blanche nappe, Western Alps. A pegmatitic gabbro associated to the main cumulus sequence yields a concordant U/Pb zircon age of 284.2 +/- 0.6 Ma, whereas a pegmatitic granite dike crosscutting the latter yields a concordant age of 282.9 +/- 0.6 Ma. A Fe-Ti-rich ultrabasic lamprophyre, crosscutting all other lithologies of the complex, yields an 40Ar/39Ar plateau age of 260.2 +/- 0.7 Ma on a kaersutite concentrate. All ages are interpreted as magmatic. Sub-contemporaneous felsic dikes within the Mont Collon complex are ascribed to anatectic back-veining from the country-rock, related to the emplacement of the main gabbroic body in the continental crust, which is in accordance with new isotopic data. The lamprophyres have isotopic compositions typical of a depleted mantle, in contrast to those of the cumulate gabbros, close to values of the Bulk Silicate Earth. This indicates either contrasting sources for the two magma pulses - the subcontinental lithospheric mantle for the gabbros and the underlying asthenosphere for the lamprophyres - or a single depleted lithospheric source with variable degrees of crustal contamination of the gabbroic melts during their emplacement in the continental crust. The Mont Collon complex belongs to a series of Early Permian mafic massifs, which emplaced in a short time span about 285-280 Ma ago, in a limited sector of the post-Variscan continental crust now corresponding to the Austroalpine/ Southern Alpine domains and Corsica. This magmatic activity was controlled in space and time by crustal-scale transtensional shear zones.

Geoquímica das rochas magmáticas da Ilha Brava:implicações para a origem e variabilidade espaço-temporal do ponto quente de Cabo Verde

A Ilha Brava (64 km2) localiza-se no extremo oeste do alinhamento meridional do arquipélago de Cabo Verde, sendo constituída por três unidades vulcanoestratigráficas que testemunham uma história vulcânica de cerca de 3 Ma. Foi escolhida como objecto de estudo na tentativa de contribuir para a melhor compreensão da origem e local de residência de alguns dos componentes mantélicos, das relações genéticas entre magmas silicatados e carbonatíticos, dos processos de desgaseificação de magmas carbonatíticos e da origem do carbono neles contido, da variabilidade geoquímica espaço-temporal do ponto quente de Cabo Verde, e da profundidade de enraizamento da sua pluma mantélica. A Brava contrasta com as outras ilhas do arquipélago por definir dois grupos geoquímicos distintos. As amostras do Complexo Basal, sendo menos radiogénicas Sr e He e mais em Nd e Pb que a unidade mais recente, são idênticas às ilhas do norte e explicáveis pela mistura de um componente do tipo HIMU (crosta oceânica reciclada com 1.3 Ga) e manto inferior (3He/4He até 12.85 Ra), carreados para a “superfície” pela pluma mantélica. Tal como é usual nas ilhas do sul, a Unidade Superior sugere, em adição, o envolvimento de um componente com afinidade EM-1, aqui considerado representativo de fragmentos de litosfera subcontinental dispersos na astenosfera. Os carbonatitos definem dois grupos com assinaturas isotópicas semelhantes às das rochas silicatadas contemporâneas. Os calciocarbonatitos resultaram de imiscibilidade líquida produzindo magmas nefeliníticos e carbonatíticos, enquanto os magnesiocarbonatitos representam líquidos residuais após a fraccionação de calcite a partir de um magma carbonatítico. As muito baixas razões 4He/40Ar* (≈ 0.25) que caracterizam a fonte dos carbonatitos do Complexo Basal indicam uma evolução a partir de razões K/U muito mais elevadas que o conjunto dos reservatórios silicatados da Terra. Sendo estes valores, também incompatíveis com a reciclagem de componentes crostais, foram aqui interpretados como podendo reflectir a contribuição do “missing Ar reservoir” para a fonte mantélica dos carbonatitos.

Geometry, petrology and growth of a shallow crustal laccolith : the Torres del Paine Mafic Complex (Patagonia)

1. ABSTRACTS - RÉSUMÉSSCIENTIFIC ABSTRACT - ENGLISH VERSIONGeometry, petrology and growth of a shallow crustal laccolith: the Torres del Paine Mafi c Complex (Patagonia)The Torres del Paine intrusive complex (TPIC) is a composite mafic-granitic intrusion, ~70km2, belonging to a chain of isolated Miocene plutons in southern Patagonia. Their position is intermediate between the Mesozoic-Cenozoic calc-alkaline subduction related Patagonian batholith in the West and the late Cenozoic alkaline basaltic back-arc related plateau lavas in the East. The Torres del Paine complex formed during an important reconfiguration of the Patagonian geodynamic setting, with a migration of magmatism from the arc to the back-arc, possibly related to the Chile ridge subductionThe complex intruded the flysch of the Cretaceous Cerro Toro and Punta Barrosa Formations during the Miocene, creating a well-defined narrow contact aureole of 200-400 m width.In its eastern part, the Torres del Paine intrusive complex is a laccolith, composed of a succession of hornblende-gabbro to diorite sills at its base, with a total thickness of ~250m, showing brittle contacts with the overlying granitic sills, that form spectacular cliffs of more than 1000m. This laccolith is connected, in the western part, to its feeding system, with vertical alternating sheets of layered gabbronorite and Hbl-gabbro, surrounded and percolated by diorites. ID-TIMS U-Pb on zircons on feeder zone (FZ) gab- bros yield 12.593±0.009Ma and 12.587±0.009Ma, which is identifcal within error to the oldest granite dated so far by Michel et al. (2008). In contrast, the laccolith mafic complex is younger than than the youngest granite (12.50±0.02Ma), and has been emplaced from 12.472±0.009Ma to 12.431 ±0.006Ma, by under-accretion beneath the youngest granite at the interface with previously emplaced mafic sills.The gabbronorite crystallization sequence in the feeder zone is dominated by olivine, plagioclase, clinopyroxene and orthopyroxene, while amphibole forms late interstitial crystals. The crystallization sequence is identical in Hornblende-gabbro from the feeder zone, with higher modal hornblende. Gabbronorite and Hornblende-gabbro both display distinct Eu and Sr positive anomalies. In the laccolith, a lower Hornblende-gabbro crystallized in sills and evolved to a high alkali shoshonitic series. The Al203, Ti02, Na20, K20, Ba and Sr composition of these gabbros is highly variable and increases up to ~50wt% Si02. The lower hornblende-gabbro is characterized by kaersutite anhedral cores with inclusions of olivine, clino- and orthopyroxene and rare apatite and An70 plagioclase. Trace element modelling indicates that hornblende and clinopyroxene are in equilibrium with a liquid whose composition is similar to late basaltic trachyandesitic dikes that cut the complex. The matrix in the lower hornblende gabbro is composed of normally zoned oligoclase, Magnesio-hornblende, biotite, ilmenite and rare quartz and potassium feldspar. This assemblage crystallized in-situ from a Ba and Sr-depleted melts. In contrast, the upper Hbl-gabbro is high-K calc-alkaline. Poikilitic pargasite cores have inclusions of euhedral An70 plagioclase inclusions, and contain occasionally clinopyroxene, olivine and orthopyroxene. The matrix composition is identical to the lower hornblende-gabbro and similar to the diorite. Diorite bulk rock compositions show the same mineralogy but different modal proportions relative to hornblende-gabbrosThe Torres del Paine Intrusive Complex isotopic composition is 87Sr/86Sr=0.704, 143Nd/144Nd=0.5127, 206Pb/204Pb=18.70 and 207Pb/204Pb=15.65. Differentiated dioritic and granitic units may be linked to the gabbroic cumulates series, with 20-50% trapped interstitial melt, through fractionation of olivine-bearing gabbronorite or hornblende-gabbro fractionation The relative homogeneity of the isotopic compositions indicate that only small amounts of assimilation occurred. Two-pyroxenes thermometry, clinopyroxene barometry and amphibole-plagioclase thermometry was used to estimate pressure and temperature conditions. The early fractionation of ultramafic cumulates occurs at mid to lower crustal conditions, at temperatures exceeding 900°C. In contrast, the TPIC emplacement conditions have been estimated to ~0.7±0.5kbar and 790±60°C.Based on field and microtextural observations and geochemical modelling, fractionation of basaltic-trachyandesitic liquids at intermediate to lower crustal levels, has led to the formation of the Torres del Paine granites. Repetitive replenishment of basaltic trachy- andesitic liquid in crustal reservoirs led to mixed magmas that will ascend via the feeder zone, and crystallize into a laccolith, in the form of successive dioritic and gabbroic sills. Dynamic fractionation during emplacement concentrated hornblende rich cumulates in the center of individual sills. Variable degrees.of post-emplacement compaction led to the expulsion of felsic liquids that preferentially concentrated at the top of the sills. Incremental sills amalgamation of the entire Torres del Paine Intrusive Complex has lasted for ~160ka.RESUME SCIENTIFIQUE - VERSION FRANÇAISEGéométrie, pétrologie et croissance d'un laccolite peu profond : Le complexe ma- fique du Torres del Paine (Patagonie)Le Complexe Intrusif du Torres del Paine (CITP) est une intrusion bimodale, d'environ 70km2, appartenant à une chaîne de plutons Miocènes isolés, dans le sud de la Patago-nie. Leur position est intermédiaire entre le batholite patagonien calco-alcalin, à l'Ouest, mis en place au Mesozoïque-Cenozoïque dans un contexte de subduction, et les basal-tes andésitiques et trachybasaltes alcalins de plateau, plus jeune, à l'Est, lié à l'ouverture d'un arrière-arc.A son extrémité Est, le CITP est une succession de sills de gabbro à Hbl et de diorite, sur une épaisseur de ~250m, avec des évidences de mélange. Les contacts avec les sills de granite au-dessus, formant des parois de plus de 1000m, sont cassants. Ce laccolite est connecté, dans sa partie Ouest, à une zone d'alimentation, avec des intrusions sub-ver- ticales de gabbronorite litée et de gabbro à Hbl, en alternance. Celles-ci sont traversées et entourées par des diorites. Les zircons des gabbros de la zone d'alimentation, datés par ID-TIMS, ont cristallisés à 12.593±0.009Ma et 12.587±0.009Ma, ce qui correspond au plus vieux granite daté à ce jour par Michel et al. (2008). A l'inverse, les roches manques du laccolite se sont mises en place entre 12.472±0.009Ma et 12.431 ±0.006Ma, par sous-plaquage successifs à l'interface avec le granite le plus jeune daté à ce jour (12.50±0.02Ma).La séquence de cristallisation des gabbronorites est dominée par Ol, Plg, Cpx et Opx, alors que la Hbl est un cristal interstitiel. Elle est identique dans les gabbros à Hbl de la zone d'alimentation, avec ~30%vol de Hbl. Les gabbros de la zone d'alimentation montrent des anomalies positives en Eu et Sr distinctes. Dans le laccolite, le gabbro à Hbl inférieur évolue le long d'une série shoshonitique, riche en éléments incompatibles. Sa concentration en Al203, Ti02, Na20, K20, Ba et Sr est très variable et augmente rapide-ment jusqu'à ~50wt% Si02. Il est caractérisé par la présence de coeurs résorbés de kaer- sutite, entourés de Bt, et contenant des inclusions d'OI, Cpx et Opx, ou alors d'Ap et de rares Plg (An70). Hbl et Cpx ont cristallisés à partir d'un liquide de composition similaire aux dykes trachy-andesite basaltique du CITP. La matrice, cristallisée in-situ à partir d'un liquide pauvre en Ba et Sr, est composée d'oligoclase zoné de façon simple, de Mg-Hbl, Bt, llm ainsi que de rares Qtz et KF. Le gabbro à Hbl supérieur, quant à lui, appartient à une suite chimique calco-alcaline riche en K. Des coeurs poecilitiques de pargasite con-tiennent de nombreuses inclusions de Plg (An70) automorphe, ainsi que des Ol, Cpx et Opx. La composition de la matrice est identique à celle des gabbros à Hbl inférieurs et toutes deux sont similaires à la minéralogie des diorites. Les analyses sur roches totales de diorites montrent la même variabilité que celles de gabbros à Hbl, mais avec une ten-eur en Si02 plus élevée.La composition isotopique des liquides primitifs du CITP a été mesurée à 87Sr/86Sr=0.704, 143Nd/144Nd=0.5127, 206Pb/204Pb=18.70 et 207Pb/204Pb=15.65. Les granites et diorites différenciés peuvent être reliés à des cumulais gabbronoritiques (F=0.74 pour les granites et F=1-0.5 pour les diorites) et gabbroïques à Hbl (fractionnement supplémentaire pour les granites, avec F=0.3). La cristallisation de 20 à 50%vol de liquide interstitiel piégé dans les gabbros du CITP explique leur signature géochimique. Seules de faibles quantités de croûte continentale ont été assimilées. La température et la pression de fractionnement ont été estimées, sur la base des thermobaromètres Opx-Cpx, Hbl-Plg et Cpx, à plus de 900°C et une profondeur correspondant à la croûte inférieure-moyenne. A l'inverse, les conditions de cristallisation de la matrice des gabbros et diorites du laccolite ont été estimées à 790±60°C et ~0.7±0.5kbar.Je propose que les liquides felsiques du CITP se soient formés par cristallisation frac-tionnée en profondeur des assemblages minéralogiques observés dans les gabbros du CITP, à partir d'un liquide trachy-andesite basaltique. La percolation de magma dans les cristaux accumulés permet la remontée du mélange à travers la zone d'alimentation, vers le laccolite, où des sills se mettent en place successivement. L'amalgamation de sills dans le CITP a duré ~160ka.Le CITP s'est formé durant une reconfiguration importante du contexte géodynamique en Patagonie, avec un changement du magmatisme d'arc vers un volcanisme d'arrière- arc. Ce changement est certainement lié à la subduction de la ride du Chili.RESUME GRAND PUBLIC - VERSION FRANÇAISEGéométrie, pétrologie et croissance d'une chambre magmatique peu profonde : Le complexe mafique du Torres del Paine (Patagonie)Le pourtour de l'Océan Pacifique est caractérisé par une zone de convergence de plaques tectoniques, appelée zone de subduction, avec le plongement de croûte océa-nique sous les Andes dans le cas de la Patagonie. De nombreux volcans y sont associés, formant la ceinture de feu. Mais seuls quelques pourcents de tout le magma traversant la croûte terrestre parviennent à la surface et la majeure partie cristallise en profondeur, dans des chambres magmatiques. Quelles est leur forme, croissance, cristallisation et durée de vie ? Le complexe magmatique du Torres del Paine représente l'un des meilleurs endroits au monde pour répondre à ces questions. Il se situe au sud de la Patagonie, formant un massif de 70km2. Des réponses peuvent être trouvées à différentes échelles, variant de la montagne à des minéraux de quelques 1000ème de millimètres.Il est possible de distinguer trois types de roches : des gabbros et des diorites sur une épaisseur de 250m, surmontées par des parois de granite de plus de 1000m. Les contacts entre ces roches sont tous horizontaux. Entre granites et gabbro-diorite, le contact est net, indiquant que le second magma s'est mis en place au contact avec un magma plus ancien, totalement solidifié. Entre gabbros et diorites, les contacts sont diffus, souvent non-linéaires, indiquant à l'inverse la mise en contact de magmas encore partiellement liquides. Dans la partie Ouest de cette chambre magmatique, les contacts entre roches sont verticaux. Il s'agit certainement du lieu de remplissage de la chambre magmatique.Lors du refroidissement d'un magma, différents cristaux vont se former. Leur stabilité et leur composition varient en fonction de la pression, de la température ou de la chimie du magma. La séquence de cristallisation peut être définie sur la base d'observations microscopiques et de la composition chimique des minéraux. Différents gabbros sont ainsi distingués : le gabbro à la base est riche en hornblende, d'une taille de ~5mm, sans inclusion de plagioclase mais avec des cristaux d'olivine, clinopyroxene et orthopyroxene inclus ; le gabbro supérieur est lui-aussi riche en hornblende (~5mm), avec les mêmes inclusions additionnées de plagioclase. Ces cristaux se sont formés à une température supérieure à 900°C et une profondeur correspondant à la croûte moyenne ou inférieure. Les minéraux plus fin, se trouvant hors des cristaux de hornblende des deux gabbros, sont similaires à ceux des diorites : plagioclase, biotite, hornblende, apatite, quartz et feldspath alcalin. Ces minéraux sont caractéristiques des granites. Ils ont cristallisé à ~790°C et ~2km de profondeur.La cristallisation des minéraux et leur extraction du magma par gravité provoque un changement progressif de la composition de ce dernier. Ainsi, après extraction d'olivine et d'orthopyroxene riches en Mg, de clinopyroxene riche en Ca, de plagioclase riche en Ca et Al et d'hornblende riche en Ca, Al et Mg, le liquide final sera appauvri en ces élé-ments. Un lien peut ainsi être proposé entre les diorites dont la composition est proche du liquide de départ, les granites dont la composition est similaire au liquide final, et les gabbros dont la minéralogie correspond aux minéraux extraits.L'utilisation de zircons, un minéral riche en U dont les atomes se transforment en Pb par décomposition radioactive au cours de millions d'années, permet de dater le refroidissement des roches qui les contiennent. Ainsi, il a été observé que les roches de la zone d'alimentation, à l'Ouest du complexe magmatique, ont cristallisés il y a 12.59±0.01 Ma, en même temps que les granites les plus vieux, se trouvant au sommet de la chambre magmatique, datés par Michel et al. (2008). Les deux roches pourraient donc avoir la même origine. A l'inverse, les gabbros et diorites de la chambre magmatique ont cristallisé entre 12.47±0.01Ma et 12.43±0.01Ma, les roches les plus vieilles étant à la base.En comparant la composition des roches du Torres del Paine avec celles d'autres en-tités géologiques de Patagonie, les causes du magmatisme peuvent être recherchées. A l'Ouest, on trouve en effet des intrusions granitiques, plus anciennes, caractéristiques de zones de convergence de plaque tectonique, alors qu'à l'Est, des laves basaltiques plus jeunes sont caractéristiques d'une dynamique d'extension. Sur la base des compositions chimiques des roches de ces différentes entités, l'évolution progressive de l'une à l'autre a pu être démontrée. Elle est certainement due à l'arrivée d'une dorsale océanique (zone d'extension crustale et de création de croûte océanique par la remontée de magma) dans la zone de subduction, le long des Andes.Je propose que, dans un premier temps, des magmas granitiques sont remontés dans la chambre magmatique, laissant d'importants volumes de cristaux dans la croûte pro-fonde. Dans un second épisode, les cristaux formés en profondeur ont été transportés à travers la croûte continentale, suite au mélange avec un nouveau magma injecté. Ces magmas chargés de cristaux ont traversé la zone d'alimentation avant de s'injecter dans la chambre magmatique. Différents puises ont été distingués, injectés dans la chambre magmatique du sommet à la base concernant les granites, puis à la base du granite le plus jeune pour les gabbros et diorites. Le complexe magmatique du Torres del Paine s'est construit sur une période totale de 160'000±20'000 ans.

The Variscan evolution in the External massifs of the Alps and place in their Variscan framework

In the general discussion on the Variscan evolution of central Europe the pre-Mesozoic basement of the Alps is, in many cases, only included with hesitation. Relatively well-preserved from Alpine metamorphism, the Alpine External massifs can serve as an excellent example of evolution of the Variscan basement, including the earliest Gondwana-derived microcontinents with Cadomian relics. Testifying to the evolution at the Gondwana margin, at least since the Cambrian, such pieces took part in the birth of the Rheic Ocean. After the separation of Avalonia, the remaining Gondwana border was continuously transformed through crustal extension with contemporaneous separation of continental blocks composing future Pangea, but the opening of Palaeotethys had only a reduced significance since the Devonian. The Variscan evolution in the External domain is characterised by an early HP-evolution with subsequent granulitic decompression melts. During Visean crustal shortening, the areas of future formation of migmatites and intrusion of monzodioritic magmas in a general strike-slip regime, were probably in a lower plate situation, whereas the so called monometamorphic areas may have been in an upper plate position of the nappe pile. During the Latest Carboniferous, the emplacement of the youngest granites was associated with the strike-slip faulting and crustal extension at lower crustal levels, whereas, at the surface, detrital sediments accumulated in intramontaneous transtensional basins on a strongly eroded surface. To cite this article: J.R von Raumer et al., C. R. Geoscience 341 (2009). (C) 2008 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.

Lifetime of an ocean island volcano feeder zone: constraints from U-Pb dating on coexisting zircon and baddeleyite, and 40Ar/39Ar age determinations, Fuerteventura, Canary Islands

High-precision isotope dilution - thermal ionization mass spectrometry (ID-TIMS) U-Pb zircon and baddeleyite ages from the PX1 vertically layered mafic intrusion Fuerteventura, Canary Islands, indicate initiation of magma crystallization at 22.10 +/- 0.07 Ma. The magmatic activity lasted a minimum of 0.52 Ma. Ar-40/Ar-39 amphibole dating yielded ages from 21.9 +/- 0.6 to 21.8 +/- 0.3, identical within errors to the U-Pb ages, despite the expected 1% theoretical bias between Ar-40/Ar-39 and U-Pb dates. This overlap could result from (i) rapid cooling of the intrusion (i. e., less than the 0.3 to 0.6 Ma 40Ar/39Ar age uncertainties) from closure temperatures (T-c) of zircon (699-988 degrees C) to amphibole (500-600 degrees C); (ii) lead loss affecting the youngest zircons; or (iii) excess argon shifting the plateau ages towards older values. The combination of the Ar-40/Ar-39 and U/Pb datasets implies that the maximum amount of time PX1 intrusion took to cool below amphibole T-c is 0.8 Ma, suggesting PX1 lifetime of 520 000 to 800 000 Ma. Age disparities among coexisting baddeleyite and zircon (22.10 +/- 0.07/0.08/0.15 Ma and 21.58 +/- 0.15/0.16/0.31 Ma) in a gabbro sample from the pluton margin suggest complex genetic relationships between phases. Baddeleyite is found preserved in plagioclase cores and crystallized early from low silica activity magma. Zircon crystallized later in a higher silica activity environment and is found in secondary scapolite and is found close to calcite veins, in secondary scapolite that recrystallised from plagioclase. close to calcite veins. Oxygen isotope delta O-18 values of altered plagioclase are high (+7.7), indicating interaction with fluids derived from host-rock carbonatites. The coexistence of baddeleyite and zircon is ascribed to interaction of the PX1 gabbro with CO2-rich carbonatite-derived fluids released during contact metamorphism.

The roles of flux- and decompression melting and their respective fractionation lines for continental crust formation: Evidence from the Kohistan arc

Delamination and foundering of the lower continental crust (LCC) into the mantle is part of the crust-forming mechanism. However, knowledge of the composition and mineralogy of the preserved or delaminated LCC over geological timescales remains scarce. We provide a synopsis of recent research within the Kohistan arc (Pakistan) and demonstrate that hydrous and less hydrous liquid lines of descent related to flux assisted and decompression mantle melting, respectively, produce compositionally different lower crustal rocks. The argument refers to two lower crustal sections exposed in Kohistan, the older Southern Plutonic Complex (SPC) and the younger Chilas Complex. The SPC typifies a hydrous, high-pressure fractionation sequence of olivine-pyroxenes-garnet-Fe/Ti-oxide-amphibole-plagioclase. The Chilas Complex illustrates a less hydrous fractionation sequence of olivine-clinopyroxene-orthopyroxene-plagioclase-amphibole. Despite the similarity of the Chilas Complex rocks to proposed lower crust compositions, the less hydrous fractionation results in unrealistically small volumes of silica-rich rocks, precluding the Chilas Complex gabbros to represent the magmatic complement to the upper crust. The composition of the SPC lower crust differs markedly from bulk lower crust estimates, but is complementary to silica-rich rocks exposed along this section and in the Kohistan batholith. These observations inspire a composite model for the formation of continental crust (CC) where the negatively buoyant delaminated and the buoyant preserved lower continental crusts (LCC) differ in genesis, mineralogy, and composition. We propose that the upper, non-sedimentary subsequent removal of the complementary, negatively buoyant garnet-pyroxene-amphibole-plagioclase-rich cumulates. In contrast, the LCC, which is buoyant and preserved over geological timescales, is formed by less hydrous parental mantle melts. We suggest that the bulk continental crust composition is related to mixing of these petrologically not directly related end members. Published by Elsevier B.V.

Post-Plutonic Magmatism: from the Source to the Emplacement of an Upper Crustal Dyke Swarm, Adamello Massif, Italy

Magmas of the arc-tholeiitic and calc-alkaline differentiation suites contribute substantially to the formation of continental crust in subduction zones. Different geochemical-petrological models have been put forward to achieve evolved magmas forming large volumes of tonalitic to granitic plutons, building an important part of the continental crust. Primary magmas produced in the mantle wedge overlying the subducted slab migrate through the mantle and the crust. During the transfer, magma can accumulate in intermediate reservoirs at different levels where crystallization leads to differentiation and the heat transfer from the magma, together with gained heat from solidification, lead to partial melting of the crust. Partial melts can be assimilated and mix with more primitive magma. Moreover, already formed crystal cumulates or crystal mushes can be recycled and reactivated to transfer to higher crustal levels. Magma transport in the crust involves fow through fractures within a brittle elastic rock. The solidified magma filled crack, a dyke, can crosscut previously formed geological structures and thus serves as a relative or absolute time marker. The study area is situated in the Adamello massif. The Adamello massif is a composite of plutons that were emplaced between 42 and 29 million years. A later dyke swarm intruded into the southern part of the Adamello Batholith. A fractionation model covering dyke compositions from picrobasalts to dacites results in the cummulative crystallization of 17% olivine, 2% Cr-rich spinel, 18% clinopyroxene, 41% amphibole, 4% plagioclase and 0.1% magnetite to achieve an andesitic composition out of a hydrous primitive picrobasalt. These rocks show a similar geochemical evolution as experimental data simulating fractional crystallization and associated magma differentiation at lower crustal depth (7-10 kbar). The peraluminous, corundum normative composition is one characteristic of more evolved dacitic magmas, which has been explained in a long lasting debate with two di_erent models. Melting of mafic crust or politic material provides one model, whereas an alternative is fractionation from primary mantle derived melts. Amphibole occurring in basaltic-andesitic and andesitic dyke rocks as fractionating cumulate phase extracted from lower crustal depth (6-7.5 kbar) is driving the magmas to peraluminous, corundum normative compositions, which are represented by tonalites forming most of the Adamello Batholith. Most primitive picrobasaltic dykes have a slightly steepened chondrite normalized rare earth elements (REE) pattern and the increased enrichment of light-REE (LREE) for andesites and dacites can be explained by the fractional crystallization model originating from a picrobasalt, taking the changing fractionating phase assemblage and temperature into account. The injection of hot basaltic magma (~1050°C) in a closely spaced dyke swarm increases the surface of the contact to the mainly tonalitic wallrock. Such a setting induces partial melting of the wall rock and selective assimilation. Partial melting of the tonalite host is further expressed through intrusion breccias from basaltic dykes. Heat conduction models with instantaneous magma injection for such a dyke swarm geometry can explain features of partial melting observed in the field. Geochemical data of minerals and bulk rock further underline the selective or bulk assimilation of the tonalite host rock at upper crustal levels (~2-3 kbar), in particular with regard to light ion lithophile elements (LILE) such as Sr, Ba and Rb. Primitive picrobasalts carry an immiscible felsic assimilant as enclaves that bring along refractory rutile and zircon with textures typically found in oceanic plagiogranites or high pressure/low-temperature metamorphic rocks in general. U-Pb data implies a lower Cretaceous age for zircon not yet described as assimilant in Eocene to Oligocene magmatic rocks of the Central Southern Alps. The distribution of post-plutonic dykes in large batholiths such as the Adamello is one of the key features for understanding the regional stress field during the post-batholith emplacement cooling history. The emplacement of the regional dyke swarm covering the southern part of the Adamello massif was associated with consistent left lateral strike-slip movement along magma dilatation planes, leading to en echelon segmentation of dykes. Through the dilation by magma of pre-existing weaknesses and cracks in an otherwise uniform host rock, the dyke propagation and according orientation in the horizontal plane adjusted continuously perpendicular to least compressive remote stress σ3, resulting in an inferred rotation of the remote principal stress field. Les magmas issus des zones de subduction contribuent substantiellement à la formation de la croûte continentale. Les plutons tonalitiques et granitiques représentent, en effet, une partie importante de la croûte continentale. Des magmas primaires produits dans le 'mantle wedge ', partie du manteau se trouvant au-dessus de la plaque plongeante dans des zones de subduction, migrent à travers le manteau puis la croûte. Pendant ce transfert, le magma peut s'accumuler dans des réservoirs intermédiaires à différentes profondeurs. Le stockage de magma dans ces réservoirs engendre, d'une part, la différentiation des magmas par cristallisation fractionnée et, d'autre part, une fusion partielle la croûte continentale préexistante associée au transfert de la chaleur des magmas vers l'encaissant. Ces liquides magmatiques issus de la croûte peuvent, ensuite, se mélanger avec des magmas primaires. Le transport du magma dans la croûte implique notamment un flux de magma à travers différentes fractures recoupant les roches encaissantes élastiques. Au cours de ce processus de migration, des cumulats de cristaux ou des agrégats de cristaux encore non-solidifiés, peuvent être recyclés et réactivés pour être transportés à des niveaux supérieures de la croûte. Le terrain d'étude est situé dans le massif d'Adamello. Celui-ci est composé de plusieurs plutons mis en place entre 42 et 29 millions d'années. Dans une phase tardive de l'activité magmatique liée à ce batholite, une série de filons de composition variable allant de picrobasalte à des compositions dacitiques s'est mise en place la partie sud du massif. Deux modèles sont proposés dans la littérature, pour expliquer la formation des magmas dacitiques caractérisés par des compositions peralumineux (i.e. à corindon normatif). Le premier modèle propose que ces magmas soient issus de la fusion de matériel mafique et pélitique présent dans la partie inférieur de la croûte, alors que le deuxième modèle suggère une évolution par cristallisation fractionnée à partir de liquides primaires issus du manteau. Un modèle de cristallisation fractionnée a pu être développé pour expliquer l'évolution des filons de l'Adamello. Ce modèle explique la formation des filons dacitiques par la cristallisation fractionnée de 17% olivine, 2% spinelle riche en Cr, 18% clinopyroxène, 41% amphibole, 4% plagioclase et 0.1% magnetite à partir de liquide de compositions picrobasaltiques. Ce modèle prend en considération les contraintes pétrologiques déduites de l'observation des différents filons ainsi que du champ de stabilité des différentes phases en fonction de la température. Ces roches montrent une évolution géochimique similaire aux données expérimentales simulant la cristallisation fractionnée de magmas évoluant à des niveaux inférieurs de la croûte (7-10 kbar). Le modèle montre, en particulier, le rôle prépondérant de l'amphibole, une phase qui contrôle en particulier le caractère peralumineux des magmas différentiés ainsi que leurs compositions en éléments en traces. Des phénomènes de fusion partielle de l'encaissant tonalitique lors de la mise en place de _lons mafiques sont observée sur le terrain. L'injection du magma basaltique chaud (~1050°C) sous forme de filons rapprochés augmente la surface du contact avec l'encaissante tonalitique. Une telle situation produit la fusion partielle des roches encaissantes nécessaire à l'incorporation d'enclaves mafiques observés au sein des tonalites. Pour comprendre les conditions nécessaires pour la fusion partielle des roches encaissantes, des modèles de conduction thermique pour une injection simultanée d'une série de filons ont été développées. Des données géochimiques sur les minéraux et sur les roches totales soulignent qu'au niveau supérieur de la croûte, l'assimilation sélective ou totale de l'encaissante tonalitique modifie la composition du liquide primaire pour les éléments lithophiles tel que le Sr, Ba et Rb. Un autre aspect important concernant la pétrologie des filons de l'Adamello est la présence d'enclaves felsiques dans les filons les plus primitifs. Ces enclaves montrent, en particulier, des textures proches de celles rencontrées dans des plagiogranites océaniques ou dans des roches métamorphiques de haute pression/basse température. Ces enclaves contiennent du zircon et du rutile. La datations de ces zircons à l'aide du géochronomètre U-Pb indique un âge Crétacé inférieur. Cet âge est important, car aucune roche de cet âge n'a été considérée comme un assimilant potentiel pour des roches magmatiques d'âge Eocène à Oligocène dans les Alpes Sud Centrales. La réparation spatiale des filons post-plutoniques dans des grands batholites tel que l'Adamello, est une caractéristique clé pour la compréhension des champs de contraintes lors du refroidissement du batholite. L'orientation des filons va, en particulier, indiqué la contrainte minimal au sein des roches encaissante. La mise en place de la série de filon recoupant la partie Sud du massif de l'Adamello est associée à un décrochement senestre, un décrochement que l'on peut lié aux contraintes tectoniques régionales auxquelles s'ajoutent l'effet de la dilatation produite par la mise en place du batholite lui-même. Ce décrochement senestre produit une segmentation en échelon des filons.

Mineral inventory of continuously erupting basaltic andesites at Arenal volcano, Costa Rica: implications for interpreting monotonous, crystal-rich, mafic arc stratigraphies

Except for the first 2 years since July 29, 1968, Arenal volcano has continuously erupted compositionally monotonous and phenocryst-rich (similar to35%) basaltic andesites composed of plagioclase (plag), orthopyroxene (opx), clinopyroxene (cpx), spinel olivine. Detailed textural and compositional analyses of phenocrysts, mineral inclusions, and microlites reveal comparable complexities in any given sample and identify mineral components that require a minimum of four crystallization environments. We suggest three distinct crystallization environments crystallized low Mg# (<78) silicate phases from andesitic magma but at different physical conditions, such as variable pressure of crystallization and water conditions. The dominant environment, i.e., the one which accounts for the majority of minerals and overprinted all other assemblages near rims of phenocrysts, cocrystallized clinopyroxene (Mg# similar to71-78), orthopyroxene (Mg# similar to71-78), titanomagnetite and plagioclase (An(60) to An(85)). The second environment cocrystallized clinopyroxene (Mg# 71-78), olivine (<Fo(78)), titanomagnetite, and very high An (similar to90) plagioclase, while the third cocrystallized clinopyroxene (Mg# 71-78) with high (>7) Al/Ti and high (>4 wt.%) Al2O3, titanomagnetite with considerable Al2O3 (10-18 wt.%) and possibly olivine but appears to lack plagioclase. A fourth crystallization environment is characterized by clinopyroxene (e.g., Mg#=similar to78-85; Cr2O3=0.15-0.7 wt.%), Al-, Cr-rich spinel olivine (similar toFo(80)), and in some circumstances high-An (>80) plagioclase. This assemblage seems to record mafic inputs into the Arenal system and crystallization at high to low pressures. Single crystals cannot be completely classified as xenocrysts, antecrysts (cognate crystals), or phenocrysts, because they often contain different parts each representing a different crystallization environment and thus belong to different categories. Bulk compositions are mostly too mafic to have crystallized the bulk of ferromagnesian minerals and thus likely do not represent liquid compositions. On the other hand, they are the cumulative products of multiple mixing events assembling melts and minerals from a variety of sources. The driving force for this multistage mixing evolution to generate erupting basaltic andesites is thought to be the ascent of mafic magma from lower crustal levels to subvolcanic depths which at the same time may also go through compositional modification by fractionation and assimilation of country rocks. Thus, mafic magmas become basaltic andesite through mixing, fractionation and assimilation by the time they arrive at subvolcanic depths. We infer new increments of basaltic andesite are supplied nearly continuously to the subvolcanic reservoir concurrently to the current eruption and that these new increments are blended into the residing, subvolcanic magma. Thus, the compositional monotony is mostly the product of repetitious production of very similar basaltic andesite. Furthermore, we propose that this quasi-constant supply of small increments of magma is the fundamental cause for small-scale, decade-long continuous volcanic activity; that is, the current eruption of Arenal is flux-controlled by inputs of mantle magmas. (C) 2004 Elsevier B.V. All rights reserved.

Melt variability in percolated peridotite: an experimental study applied to reactive migration of tholeiitic basalt in the upper mantle

Melt-rock reaction in the upper mantle is recorded in a variety of ultramafic rocks and is an important process in modifying melt composition on its way from the source region towards the surface. This experimental study evaluates the compositional variability of tholeiitic basalts upon reaction with depleted peridotite at uppermost-mantle conditions. Infiltration-reaction processes are simulated by employing a three-layered set-up: primitive basaltic powder ('melt layer') is overlain by a 'peridotite layer' and a layer of vitreous carbon spheres ('melt trap'). Melt from the melt layer is forced to move through the peridotite layer into the melt trap. Experiments were conducted at 0.65 and 0.8 GPa in the temperature range 1,170-1,290 degrees C. In this P-T range, representing conditions encountered in the transition zone (thermal boundary layer) between the asthenosphere and the lithosphere underneath oceanic spreading centres, the melt is subjected to fractionation, and the peridotite is partially melting (T (s) similar to 1,260 degrees C). The effect of reaction between melt and peridotite on the melt composition was investigated across each experimental charge. Quenched melts in the peridotite layers display larger compositional variations than melt layer glasses. A difference between glasses in the melt and peridotite layer becomes more important at decreasing temperature through a combination of enrichment in incompatible elements in the melt layer and less efficient diffusive equilibration in the melt phase. At 1,290A degrees C, preferential dissolution of pyroxenes enriches the melt in silica and dilutes it in incompatible elements. Moreover, liquids become increasingly enriched in Cr(2)O(3) at higher temperatures due to the dissolution of spinel. Silica contents of liquids decrease at 1,260 degrees C, whereas incompatible elements start to concentrate in the melt due to increasing levels of crystallization. At the lowest temperatures investigated, increasing alkali contents cause silica to increase as a consequence of reactive fractionation. Pervasive percolation of tholeiitic basalt through an upper-mantle thermal boundary layer can thus impose a high-Si 'low-pressure' signature on MORB. This could explain opx + plag enrichment in shallow plagioclase peridotites and prolonged formation of olivine gabbros.

Juxtaposition of melt impregnation and high-temperature shear zones in the upper mantle; field and petrological constraints from the Lanzo peridotite (Northern Italy)

Results of a field and microstructural study between the northern and the central bodies of the Lanzo plagioclase peridotite massif (NW Italy) indicate that the spatial distribution of deformation is asymmetric across kilometre-scale mantle shear zones. The southwestern part of the shear zone (footwall) shows a gradually increasing degree of deformation from porphyroclastic peridotites to mylonite, whereas the northeastern part (hanging wall) quickly grades into weakly deformed peridotites. Discordant gabbroic and basaltic dykes are asymmetrically distributed and far more abundant in the footwall of the shear zone. The porphyroclastic peridotite displays porphyroclastic zones and domains of igneous crystallization whereas mylonites are characterized by elongated porphyroclasts, embedded between fine-grained, polycrystalline bands of olivine, plagioclase, clinopyroxene, orthopyroxene, spinel, rare titanian pargasite, and domains of recrystallized olivine. Two types of melt impregnation textures have been found: (1) clinopyroxene porphyroclasts incongruently reacted with migrating melt to form orthopyroxene plagioclase; (2) olivine porphyroclasts are partially replaced by interstitial orthopyroxene. The meltrock reaction textures tend to disappear in the mylonites, indicating that deformation in the mylonite continued under subsolidus conditions. The pyroxene chemistry is correlated with grain size. High-Al pyroxene cores indicate high temperatures (11001030C), whereas low-Al neoblasts display lower final equilibration temperatures (860C). The spinel Cr-number [molar Cr/(Cr Al)] and TiO2 concentrations show extreme variability covering almost the entire range known from abyssal peridotites. The spinel compositions of porphyroclastic peridotites from the central body are more variable than spinel from mylonite, mylonite with ultra-mylonite bands, and porphyroclastic rocks of the northern body. The spinel compositions probably indicate disequilibrium and would favour rapid cooling, and a faster exhumation of the central peridotite body, relative to the northern one. Our results indicate that melt migration and high-temperature deformation are juxtaposed both in time and space. Meltrock reaction may have caused grain-size reduction, which in turn led to localization of deformation. It is likely that melt-lubricated, actively deforming peridotites acted as melt focusing zones, with permeabilities higher than the surrounding, less deformed peridotites. Later, under subsolidus conditions, pinning in polycrystalline bands in the mylonites inhibited substantial grain growth and led to permanent weak zones in the upper mantle peridotite, with a permeability that is lower than in the weakly deformed peridotites. Such an inversion in permeability might explain why actively deforming, fine-grained peridotite mylonite acted as a permeability barrier and why ascending mafic melts might terminate and crystallize as gabbros along actively deforming shear zones. Melt-lubricated mantle shear zones provide a mechanism for explaining the discontinuous distribution of gabbros in oceancontinent transition zones, oceanic core complexes and ultraslow-spreading ridges.

Late Cretaceous to Eocene geology of the South Central American forearc area (southern Costa Rica and western Panama) : initiation and evolution of an intra-oceanic convergent margin

Résumé : L'arc volcanique du sud de l'Amérique Centrale se situe sur la marge SW de la Plaque Caraïbe, au-dessus des plaques subduites de Cocos et Nazca. Il s'agit de l'un des arcs intra-océaniques les plus étudiés au monde, qui est généralement considéré comme s'étant développé à la fin du Crétacé le long d'un plateau océanique (le Plateau Caraïbe ou CLIP) et se trouvant actuellement dans un régime de subduction érosive. Au cours des dernières décennies, des efforts particuliers ont été faits pour comprendre les processus liés à la subduction sur la base d'études géophysiques et géochimiques. Au sud du Costa Rica et à l'ouest du Panama, des complexes d'accrétions et structures à la base de l'arc volcanique ont été exposés grâce à la subduction de rides asismiques et de failles transformantes. Des affleurements, situés jusqu'à seulement 15 km de la fosse, offrent une possibilité unique de mieux comprendre quelques uns des processus ayant lieu le long de la zone de subduction. Nous présentons de nouvelles contraintes sur l'origine de ces affleurements en alliant une étude de terrain poussée, de nouvelles données géochimiques, sédimentaires et paléontologiques, ainsi que des observations structurales effectuées en télédétection. Une nouvelle stratigraphie tectonique entre le Campanien et l'Éocène est définie pour la région d'avant-arc située entre la Péninsule d'Osa (Costa Rica) et la Péninsule d'Azuero (Panama). Nos résultats montrent que la partie externe de la marge est composée d'un arrangement complexe de roches ignées et de séquences sédimentaires de recouvrement qui comprennent principalement le socle de l'arc, des roches d'arc primitif, des fragments de monts sous-marins accrétés et des mélanges d'accrétion. Des preuves sont données pour le développement de l'arc volcanique du sud de l'Amérique Centrale sur un plateau océanique. Le début de la subduction le long de la marge SW de la Plaque Caraïbe a eu lieu au Campanien et a généré des roches d'arc primitif caractérisées par des affinités géochimiques particulières, globalement intermédiaires entre des affinités de plateau et d'arc insulaire. L'arc était mature au Maastrichtien et formait un isthme essentiellement continu entre l'Amérique du Nord et l'Amérique du Sud. Ceci a permis la migration de faunes terrestres entre les Amériques et pourrait avoir contribué à la crise fin Crétacé -Tertiaire en réduisant les courants océaniques subéquatoriaux entre le Pacifique et l'Atlantique. Plusieurs unités composées de fragments de monts sous-marins accrétés sont définies. La nature et l'arrangement structural de ces unités définissent de nouvelles contraintes sur les modes d'accrétion des monts sous-marins/îles océaniques et sur l'évolution de la marge depuis la formation de la zone de subduction. Entre la fin du Crétacé et l'Éocène moyen, la marge a enregistré plusieurs épisodes ponctuels d'accrétion de monts sous-marins alternant avec de la subduction érosive. A l'Éocène moyen, un événement tectonique régional pourrait avoir causé un fort couplage entre les plaques supérieure et inférieure, menant à des taux plus important d'accrétion de monts sous-marins. Durant cette période, la situation le long de la marge était très semblable à la situation actuelle et caractérisée par la présence de monts sous-marins subductants et l'absence d'accrétion de sédiments. L'enregistrement géologique montre qu'il n'est pas possible d'attribuer une nature érosive ou accrétionnaire à la marge dans le passé ou -par analogie- aujourd'hui, parce que (1) les processus d'accrétion et érosifs varient fortement spatialement et temporellement et (2) il est impossible d'évaluer la quantité exacte de matériel tectoniquement enlevé à la marge depuis le début de la subduction. Au sud du Costa Rica, certains fragments de monts sous-marins accrétés sont représentatifs d'une interaction entre une ride et un point chaud dans le Pacifique au Crétacé terminal/Paléocène. L'existence de ces fragments de monts sous-marins et la morphologie du fond de l'Océan Pacifique indiquent que la formation de la ride de Cocos-Nazca s'est formée au moins ~40 Ma avant l'âge proposé par les modèles tectoniques actuels. Au Panama, nous avons identifié une île océanique d'âge début Éocène qui a été accrétée à l'Éocène moyen. L'accrétion a eu lieu à très faible profondeur par détachement de l'île dans la fosse, et a mené à une exceptionnelle préservation des structures volcaniques. Des affleurement comprenant aussi bien des parties basses et hautes de l'édifice volcanique on été étudiées, depuis la phase sous-marine bouclier jusqu'à la phase subaérienne post-bouclier. La stratigraphie nous a permis de différencier les laves de la phase sous-marine de celles de la phase subaérienne. La composition des laves indique une diminution progressive de l'intensité de la fusion partielle de la source et une diminution de la température des laves produites durant les derniers stades de l'activité volcanique. Nous interprétons ces changements comme étant liés à l'éloignement progressif de l'île océanique de la zone de fusion ou point chaud. Abstract The southern Central American volcanic front lies on the SW edge of the Caribbean Plate, inboard of the subducting Cocos and Nazca Plates. It is one of the most studied intra-oceanic convergent margins around the world, which is generally interpreted to have developed in the late Cretaceous along an oceanic plateau (the Caribbean Large Igneous Province or CLIP) and to be currently undergoing a regime of subduction erosion. In the last decades a particular effort has been made to understand subduction-related processes on the basis of geophysical and geochemical studies. In southern Costa Rica and western Panama accretionary complexes and structures at the base of the volcanic front have been exposed in response to subduction of aseismic ridges and transforms. Onland exposures are located as close as to 15 km from the trench and provide a unique opportunity to better understand some of the processes occurring along the subduction zone. We provide new constraints on the origins of these exposures by integrating a comprehensive field work, new geochemical, sedimentary and paleontological data, as well as structural observations based on remote imaging. A new Campanian to Eocene tectonostratigraphy is defined for the forearc area located between the Osa Peninsula (Costa Rica) and the Azuero Peninsula (Panama). Our results show that the outer margin is composed of a complicated arrangement of igneous complexes and overlapping sedimentary sequences that essentially comprise an arc basement, primitive island-arc rocks, accreted seamount fragments and accretionary mélanges. Evidences are provided for the development of the southern Central American arc on the top an oceanic plateau. The subduction initiation along the SW edge of the Caribbean Plate occurred in the Campanian and led to formation of primitive island-arc rocks characterized by unusual geochemical affinities broadly intermediate between plateau and arc affinities. The arc was mature in the Maastrichtian and was forming a predominantly continuous landbridge between the North and South Americas. This allowed migration of terrestrial fauna between the Americas and may have contributed to the Cretaceous-Tertiary crisis by limiting trans-equatorial oceanic currents between the Pacific and the Atlantic. Several units composed of accreted seamount fragments are defined. The nature of the units and their structural arrangement provide new constraints on the modes of accretion of seamounts/oceanic islands and on the evolution of the margin since subduction initiation. Between the late Cretaceous and the middle Eocene, the margin recorded several local episodes of seamount accretion alternating with tectonic erosion. In the middle Eocene a regional tectonic event may have triggered strong coupling between the overriding and subducting plates, leading to higher rates of seamount accretion. During this period the situation along the margin was very similar to the present and characterized by subducting seamounts and absence of sediment accretion. The geological record shows that it is not possible to ascribe an overall erosive or accretionary nature to the margin in the past and, by analogy, today, because (1) accretionary and erosive processes exhibit significant lateral and temporal variations and (2) it is impossible to estimate the exact amount of material tectonically eroded from the margin since subduction initiation. In southern Costa Rica, accreted seamount fragments point toward a plume-ridge interaction in the Pacific in the late Cretaceous/Paleocene. This occurrence of accreted seamount fragments and morphology of the Pacific Ocean floor is indicative of the formation of the Cocos-Nazca spreading system at least ~40 Ma prior to the age proposed in current tectonic models. In Panama, we identified a remarkably-well preserved early Eocene oceanic island that accreted in the middle Eocene. The accretion probably occurred at very shallow depth by detachment of the island in the trench and led to an exceptional preservation of the volcanic structures. Exposures of both deep and superficial parts of the volcanic edifice have been studied, from the submarine-shield to subaerial-postshield stages. The stratigraphy allowed us to distinguish lavas produced during the submarine and subaerial stages. The lava compositions likely define a progressive diminution of source melting and a decrease in the temperature of erupted melts in the latest stages of volcanic activity. We interpret these changes to primarily reflect the progressive migration of the oceanic island out of the melting region or hotspot.

Economics of Using Calcium Chloride vs. Sodium Chloride for Deicing/Anti-Icing, TR-488, 2008

The use of chemicals is a critical part of a pro-active winter maintenance program. However, ensuring that the correct chemicals are used is a challenge. On the one hand, budgets are limited, and thus price of chemicals is a major concern. On the other, performance of chemicals, especially at lower pavement temperatures, is not always assured. Two chemicals that are used extensively by the Iowa Department of Transportation (Iowa DOT) are sodium chloride (or salt) and calcium chloride. While calcium chloride can be effective at much lower temperatures than salt, it is also considerably more expensive. Costs for a gallon of salt brine are typically in the range of $0.05 to $0.10, whereas calcium chloride brine may cost in the range of $1.00 or more per gallon. These costs are of course subject to market forces and will thus change from year to year. The idea of mixing different winter maintenance chemicals is by no means new, and in general discussions it appears that many winter maintenance personnel have from time to time mixed up a jar of chemicals and done some work around the yard to see whether or not their new mix “works.” There are many stories about the mixture turning to “mayonnaise” (or, more colorfully, to “snot”) suggesting that mixing chemicals may give rise to some problems most likely due to precipitation. Further, the question of what constitutes a mixture “working” in this context is a topic of considerable discussion. In this study, mixtures of salt brine and calcium chloride brine were examined to determine their ice melting capability and their freezing point. Using the results from these tests, a linear interpolation model of the ice melting capability of mixtures of the two brines has been developed. Using a criterion based upon the ability of the mixture to melt a certain thickness of ice or snow (expressed as a thickness of melt-water equivalent), the model was extended to develop a material cost per lane mile for the full range of possible mixtures as a function of temperature. This allowed for a comparison of the performance of the various mixtures. From the point of view of melting capacity, mixing calcium chloride brine with salt brine appears to be effective only at very low temperatures (around 0° F and below). However, the approach described herein only considers the material costs, and does not consider application costs or other aspects of the mixture performance than melting capacity. While a unit quantity of calcium chloride is considerably more expensive than a unit quantity of sodium chloride, it also melts considerably more ice. In other words, to achieve the same result, much less calcium chloride brine is required than sodium chloride brine. This is important in considering application costs, because it means that a single application vehicle (for example, a brine dispensing trailer towed behind a snowplow) can cover many more lane miles with calcium chloride brine than with salt brine before needing to refill. Calculating exactly how much could be saved in application costs requires an optimization of routes used in the application of liquids in anti-icing, which is beyond the scope of the current study. However, this may be an area that agencies wish to pursue for future investigation. In discussion with winter maintenance personnel who use mixtures of sodium chloride and calcium chloride, it is evident that one reason for this is because the mixture is much more persistent (i.e. it stays longer on the road surface) than straight salt brine. Operationally this persistence is very valuable, but at present there are not any established methods to measure the persistence of a chemical on a pavement. In conclusion, the study presents a method that allows an agency to determine the material costs of using various mixtures of salt brine and calcium chloride brine. The method is based upon the requirement of melting a certain quantity of snow or ice at the ice-pavement interface, and on how much of a chemical or of a mixture of chemicals is required to do that.

Quantification of magmatic and hydrothermal processes in a peralkaline syenite-alkali granite complex based on textures, phase equilibria, and stable and radiogenic isotopes

The Puklen complex of the Mid-Proterozoic Gardar Province, South Greenland, consists of various silica-saturated to quartz-bearing syenites, which are intruded by a peralkaline granite. The primary mafic minerals in the syenites are augite +/- olivine + Fe-Ti oxide + amphibole. Ternary feldspar thermometry and phase equilibria among mafic silicates yield T = 950-750degreesC, a(SiO2) = 0.7-1 and an f(O2) of 1-3 log units below the fayalite-magnetite-quartz (FMQ) buffer at 1 kbar. In the granites, the primary mafic minerals are ilmenite and Li-bearing arfvedsonite, which crystallized at temperatures below 750degreesC and at f(O2) values around the FMQ buffer. In both rock types, a secondary post-magmatic assemblage overprints the primary magmatic phases. In syenites, primary Ca-bearing minerals are replaced by Na-rich minerals such as aegirine-augite and albite, resulting in the release of Ca. Accordingly, secondary minerals include ferro-actinolite, (calcite-siderite)(ss), titanite and andradite in equilibrium with the Na-rich minerals. Phase equilibria indicate that formation of these minerals took place over a long temperature interval from near-magmatic temperatures down to similar to300degreesC. In the course of this cooling, oxygen fugacity rose in most samples. For example, late-stage aegirine in granites formed at the expense of arfvedsonite at temperatures below 300degreesC and at an oxygen fugacity above the haematite-magnetite (HM) buffer. The calculated delta(18)O(melt) value for the syenites (+5.9 to +6.3parts per thousand) implies a mantle origin, whereas the inferred delta(18)O(melt) value of <+5.1parts per thousand for the granitic melts is significantly lower. Thus, the granites require an additional low-delta(18)O contaminant, which was not involved in the genesis of the syenites. Rb/Sr data for minerals of both rock types indicate open-system behaviour for Rb and Sr during post-magmatic metasomatism. Neodymium isotope compositions (epsilonNd(1170 Ma) = -3.8 to -6.4) of primary minerals in syenites are highly variable, and suggest that assimilation of crustal rocks occurred to variable extents. Homogeneous epsilon(Nd) values of -5.9 and -6.0 for magmatic amphibole in the granites lie within the range of the syenites. Because of the very similar neodymium isotopic compositions of magmatic and late- to post-magmatic minerals from the same syenite samples a principally closed-system behaviour during cooling is implied. In contrast, for the granites an externally derived fluid phase is required to explain the extremely low epsilon(Nd) values of about -10 and low delta(18)O between +2.0 and +0.5parts per thousand for late-stage aegirine, indicating an open system in the late-stage history. In this study we show that the combination of phase equilibria constraints with stable and radiogenic isotope data on mineral separates can provide much better constraints on magma evolution during emplacement and crystallization than conventional whole-rock studies.

Melt/peridotite interaction in the Southern Lanzo peridotite: Field, textural and geochemical evidence

This paper presents field, petrographic-structural and geochemical data on spinet and plagioclase peridotites from the southern domain of the Lanzo ophiolitic peridotite massif (Western Alps). Spinet lherzolites, harzburgites and dunites crop out at Mt. Arpone and Mt. Musine. Field evidence indicates that pristine porphyroclastic spinet lherzolites are transformed to coarse granular spinet harzburgites, which are in turn overprinted by plagioclase peridotites, while strongly depleted spinet harzburgite and dunite bands and bodies replace the plagioclase peridotites. On the northern flank of Mt. Arpone, deformed, porphyroclastic (lithospheric) lherzolites, with diffuse pyroxenite banding, represent the oldest spinel-facies rocks. They show microstructures of a composite subsolidus evolution, suggesting provenance from deeper (asthenospheric) mantle levels and accretion to the lithosphere. These protoliths are locally transformed to coarse granular (reactive) spinet harzburgites and dunites, which show textures reminiscent of melt/rock reaction and geochemical characteristics suggesting that they are products of peridotite interaction with reactively percolating melts. Geochemical data and modelling suggest that <1-5% fractional melting of spinel-facies DMM produced the injected melts. Plagioclase peridotites are hybrid rocks resulting from pre-existing spinet peridotites and variable enrichment of plagioclase and micro-gabbroic material by percolating melts. The impregnating melts attained silica-saturation, as testified by widespread orthopyroxene replacement of olivine, during open system migration in the lithosphere. At Mt. Musine, coarse granular spinet harzburgite and dunite bodies replace the plagioclase peridotites. Most of these replacive, refractory peridotites have interstitial magmatic clinopyroxene with trace element compositions in equilibrium with MORB, while some Cpx have REE-depleted patterns suggesting transient geochemical features of the migrating MORB-type melts, acquired by interaction with the ambient plagioclase peridotite. These replacive spinet harzburgite and dunite bodies are interpreted as channels exploited for focused and reactive migration of silica-undersaturated melts with aggregate MORB compositions. Such melts were unrelated to the silica-saturated melts that refertilized the pre-existing plagioclase peridotites. Finally, MORB melt migration occurred along open fractures, now recorded as gabbroic dikes. Our data document the complexity of rock-types and mantle processes in the South Lanzo peridotite massif and describe a composite tectonic and magmatic scenario that is not consistent with the ``asthenospheric scenario'' proposed by previous authors. We envisage a ``transitional scenario'' in which extending subcontinental lithospheric mantle was strongly modified (both depleted and refertilized) by early melts with MORB-affinity formed by decompression partial melting of the upwelling asthenosphere, during pre-oceanic rifting and lithospheric thinning in the Ligurian Tethys realm. (C) 2006 Elsevier B.V. All rights reserved.

Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.