Cross-industry preparedness for Cotton leaf curl disease

Cotton leaf curl disease (CLCuD) is a major biosecurity threat to the Australian cotton industry. This proposal seeks cross-industry investment from the cotton (CRDC) and horticulture (HAL) industries to address the threat of exotic whitefly-transmitted viruses. Testing of silverleaf whitefly, the vector of CLCuD, could provide an alternative, cheaper strategy for early warning disease surveillance compared to surveys for disease symptoms. Control of whitefly-transmitted viruses in Australia and overseas will be reviewed to produce an integrated management package for their control in Australia. This will also involve a workshop with key stakeholders and selected overseas participants, to develop a working party to help formulate this package.

Development of diagnotic capacity for Cotton Leaf Roll Virus from Thailand

Viral diseases of cotton are of economic significance in many parts of the world and several of these remain biosecurity threats to the Australian cotton industry, including Cotton Leaf Roll Virus (CLRV) from South East Asia. The proposed project will result in a greater understanding of the field symptoms of CLRV in Thailand and diagnostic assays used for its detection. I will also determine if the diagnostic assay being developed for Brazilian CLRDV as part of the CRDC project (11-12FRP00062) may also detect Thailand CLRV. It will provide educational opportunities to increase the knowledge base of staff currently working on cotton virus research and in doing so help to protect the Australian cotton industry from incursions of exotic viruses.

Improved understanding of the damage, ecology, and management of mirids and stinkbugs in Bollgard II

In recent years mirids and stinkbugs have emerged as important sucking pests in cotton. While stinkbugs are causing damage to bolls, mirids are causing damage to seedlings, squares and bolls. With the increasing adoption of Bollgard II and IPM approaches the use of broad-spectrum chemicals to kill Helicoverpa has been reduced and as a result mirids and stinkbugs are building to levels causing damage to bolls later in crop growth stages. Studies on stinkbugs by Dr Moazzem Khan revealed that green vegetable bug (GVB) caused significant boll damage and yield loss. A preliminary study by Dr Khan on mirids revealed that high mirid numbers at later growth stages also caused significant boll damage and that damage caused by mirids and GVB were similar. Mirids and stinkbugs therefore demand greater attention in order to minimise losses caused by these pests and to develop IPM strategies against these pests to enhance gains in IPM that have been made with Bt-transgenic cotton. Progress in this area of research will maintain sustainability and profitability of the Australian cotton industry. Mirid damage at early growth stages of cotton (up to squaring stage) has been studied in detail by Dr Khan. He found that all ages of mirids cause damage to young plants and damage by mirid nymphs is cumulative. Maximum damage occurs when the insect reaches the 4th and 5th nymphal stages. He also found that mirid feeding causes shedding of small and medium squares, and damaged large squares develop as ‘parrot beak’ bolls. Detailed studies at the boll stage, such as which stage of mirids is most damaging or which age boll is most vulnerable to feeding, is lacking. This information is a prerequisite to developing an IPM strategy for the pest in later crop growth stages. Understanding population change of the pest over time in relation to crop development is an important aspect for developing management strategies for the pest which is lacking for mirids in BollgardII. Predators and parasitoids are integral components of any IPM system and play an important part in regulating pest populations. Some generalist predators such as ants, spiders, damsel bugs and assassin bugs are known to predate on mirids. Nothing is known about parasitoids of mirids. Since green mirid (GM), Creontiades dilutus, is indigenous to Australia it is likely that we have one or more parasitoids of this mirid in Australia, but that possibility has not been investigated yet. The impact of the GVB adult parasitoid, Trichopoda giacomelli, has been studied by Dr Khan who found that the fly is established in the released areas and continues to spread. However, to get wider and greater impact, the fly should be released in new locations across the valleys. The insecticides registered for mirids and stinkbugs are mostly non-selective and are extremely disruptive to a wide range of beneficial insects. Use of these insecticides at stage I and II will minimise the impact of existing IPM programs. Therefore less disruptive control tactics including soft chemicals for mirids and stinkbugs are necessary. As with soft chemicals, salt mixtures, biopesticides based on fungal pathogens and attractants based on plant volatiles may be useful tools in managing mirids and stinkbugs with less or no disruption. Dr Khan has investigated salt mixture against mirids and GVB. While salt mixtures are quite effective and less disruptive, they are quite chemical specific. Not all chemicals mixed with salt will give the desired benefit. Therefore further investigation is needed to identify those chemicals that are effective with salt mixture against mirids and 3 of 37 GVB. Dr Caroline Hauxwell of DPI&F is working on fungal pathogen-based biopesticides against mirids and GVB and Drs Peter Gregg and Alice Del Socorro of Australian Cotton CRC are working on plant volatile-based attractants against mirids. Depending on their findings, inclusion of fungal-based biopestcides and plant volatile-based attractants in developing a management system against mirids and stinkbugs in cotton could be an important component of an IPM approach.

Improving management of summer weeds in dryland cropping systems with Cotton

In 2001 a scoping study (phase I) was commissioned to determine and prioritise the weed issues of cropping systems with dryland cotton. The main findings were that the weed flora was diverse, cropping systems complex, and weeds had a major financial and economical impact. Phase II 'Best weed management strategies for dryland cropping systems with cotton' focused on improved management of the key weeds, bladder ketmia, sowthistle, fleabane, barnyard grass and liverseed grass.In Phase III 'Improving management of summer weeds in dryland cropping systems with cotton', more information on the seed-bank dynamics of key weeds was gained in six pot and field studies. The studies found that these characteristics differed between species, and even climate in the case of bladder ketmia. Species such as sowthistle, fleabane and barnyard grass emerged predominately from the surface soil. Sweet summer grass was also in this category but also had a significant proportion emerging from 5 cm depth. Bladder ketmia in central Queensland emerged mainly from the top 2 cm, whereas in southern Queensland it emerged mainly from 5 cm. Liverseed grass had its highest emergence from 5 cm below the surface. In all cases the persistence of seed increased with increasing soil depth. Fleabane was also found to be sensitive to soil type with no seedlings emerging in the self-mulching black vertisol soil. A strategic tillage trial showed that burial of fleabane seed, using a disc or chisel plough, to a depth of greater than 2 cm can significantly reduce subsequent fleabane emergence. In contrast, tillage increased barnyard grass emergence and tended to decrease persistence. This research showed that weed management plans can not be blanketed across all weed species, rather they need to be targeted for each main weed species.This project has also resulted in an increased knowledge of how to manage fleabane from the eight experiments; one in wheat, two in sorghum, one in cotton and three in fallow on double knock. For summer crops, the best option is to apply a highly effective fallow treatment prior to sowing the crops. For winter crops, the strategy is the integration of competitive crops, residual herbicide followed by a knockdown to control survivors. This project explored further the usefulness of the double knock tactic for weed control and preventing seed set. Two field and one pot experiments have shown that this tactic was highly effective for fleabane control. Paraquat products provided good control when followed by glyphosate. When 2, 4-D was added in a tank mix with glyphosate and followed by paraquat products, 99-100% control was achieved in all cases. The ideal follow-up times for paraquat products after glyphosate were 5-7 days. The preferred follow-up times for 2, 4-D after glyphosate were on the same day and one day later. The pot trial, which compared a population from a cropping field with previous glyphosate exposure and a population from a non-cropping area with no previous glyphosate herbicide exposure, showed that the pervious herbicide exposure affected the response of fleabane to herbicidal control measures. The web-based brochure on managing fleabane has been updated.Knowledge on management of summer grasses and safe use of residual herbicides was derived from eight field and pot experiments. Residual grass and broadleaf weed control was excellent with atrazine pre-plant and at-planting treatments, provided rain was received within a short interval after application. Highly effective fallow treatments (cultivation and double knock), not only gave excellent grass control in the fallow, also gave very good control in the following cotton. In the five re-cropping experiments, there were no adverse impacts on cotton from atrazine, metolachlor, metsulfuron and chlorsulfuron residues following use in previous sorghum, wheat and fallows. However, imazapic residues did reduce cotton growth.The development of strategies to reduce the heavy reliance on glyphosate in our cropping systems, and therefore minimise the risk of glyphosate resistance development, was a key factor in the research undertaken. This work included identifying suitable tactics for summer grass control, such as double knock with glyphosate followed by paraquat and tillage. Research on fleabane also concentrated on minimising emergence through tillage, and applying the double knock tactic. Our studies have shown that these strategies can be used to prevent seed set with the goal of driving down the seed bank. Utilisation of the strategies will also reduce the reliance on glyphosate, and therefore reduce the risk of glyphosate resistance developing in our cropping systems.Information from this research, including ecological and management data were collected from an additional eight paddock monitoring sites, was also incorporated into the Weeds CRC seed bank model "Weed Seed Wizard", which will be able to predict the impact of different management options on weed populations in cotton and grain farming systems. Extensive communication activities were undertaken throughout this project to ensure adoption of the new strategies for improved weed management and reduced risk for glyphosate resistance.

Enhancing the performance of irrigated cotton and grain in Central Queensland

R&D to facilitate incorporation of grain and pulse crop phases in Central Queensland irrigated cotton monoculture systems and improve profitability of regional cropping systems.

Verticillium dahliae (defoliating strain) - cotton, vegetables

DAFF scholarship to train in the recognition and identification of defoliating strains of Verticillium dahliae in cotton and vegetable crops.

Benchmarking water management in the Australian cotton industry

Benchmarking irrigation performance has always been a challenge. As part of the Rural Water Use Efficiency (RWUE3) project the team in, collaboration with the Cotton Catchments Communities CRC, National Certificate of Educational Achievement and the Knowledge Management Phase 2 project, aimed to standardise the irrigation indices in use within the cotton industry. This was achieved through: - the delivery of training workshops - access to benchmarking tools - promotion of benchmarking as a best practice to be adopted on farm.

Maximising profitability with limited water in cotton farming systems

Diminishing water supply, changing weather patterns and pressure to enhance environmental flows are making it imperative to optimise water use efficiency (WUE) on cotton/grain farming systems. Growers are looking for better strategies to make the best use of limited water, but it is still not clear how to best use the available water at farm and field scale. This research project investigated the impact of management strategies to deal with limited water supplies on the yield and quality of irrigated cotton and wheat. The objectives were: (1) to develop irrigation management guidelines for the main irrigated crops on the Darling Downs for full- and deficitirrigation scenarios, taking into account the critical factors that affect irrigation decisions at the local level, (2) to quantify the evapotranspiration (ET) of Bollgard II cotton and wheat and its relationship to yield and quality under full- and deficit-irrigation scenarios, and (3) to increase industry awareness and education of farming systems practises for optimised economic water use efficiency.Objective (1) was addressed by (A) collaborating with ASPRU to develop the APSFarm model within APSIM to be able to perform multi-paddock simulations. APSFarm was then tested by conducting a case study at a farm near Dalby, and (B) conducting semi-structured interviews with individual farmers and crop consultants on the Darling Downs to document the strategies they are using to deal with limited water. Objective (2) was addressed by (A) building and installing 12 large (1 m x 1m x 1.5 m) weighing lysimeters to measure crop evapotranspiration. The lysimeters were installed at the Agri-Science Queensland research station at Kingsthorpe in November 2008, (B) conducting field experiments to measure crop evapotranspiration and crop development under four irrigation treatments, including dryland, deficit-irrigation, and full irrigation. Field experiments were conducted with cotton in 2007-08 and 2008-09, and with wheat in 2008 and 2009, and (C) collaborating with USQ on a PhD thesis to quantify the impact of crop stress on crop evapotranspiration and canopy temperature. Glasshouse experiments were conducted with wheat in 2008 and with cotton in 2008-09. Objective (3) was addressed by (A) conducting a field day at Kingsthorpe in 2009, which was attended by 80 participants, (B) presenting information in conferences in Australia and overseas, (D) presenting information at farmers meeting, (E) making presentations to crop consultants, and (F) preparing extension publications.As part of this project we contributed to the development of APSfarm, which has been successfully applied to evaluate the feasibility of practices at the whole-farm scale. From growers and crop consultants interviews we learned that there is a great variety of strategies, at different scales, that they are using to deal with limited water situation. These strategies will be summarised in the "e;Limited Water Guidelines for the Darling Downs"e; that we are currently preparing. As a result of this project, we now have a state-of-the-art lysimeter research facility (23 large weighing lysimeters) to be able to conduct replicated experiments to investigate daily water use of a variety of crops under different irrigation regimes and under different environments. Under this project, a series of field and glasshouse experiments were conducted with cotton and wheat, investigating aspects like: (A) quantification of daily and seasonal crop water use under nonstressed and stressed conditions, (B) impact of row configuration on crop water use, (C) impact of water stress on yield, evapotranspiration, crop vegetative and reproductive development, soil water extraction pattern, yield and yield quality. The information obtained from this project is now being used to develop web-based tools to help growers make planning and day-to-day irrigation decisions.

Tobacco Streak Virus in cotton-scoping study

In 2006, Tobacco streak virus (TSV) was identified as the causal agent of the devastating sunflower necrosis disease in central Queensland (CQ), and subsequently in 2007 as the cause of major losses in mungbeans in the same area. It has been a major factor in the recent downturn in the sunflower industry in CQ. Surveys in 2007/2008 as part of a one year scoping study (project 03DAQ005) found TSV in cotton in CQ. The symptoms were mostly confined to the feeding sites of the thrips and appeared as reddish spots and rings, but only occasionally the plants were systemically infected and showed a chlorotic mosaic and leaf deformation. The major objectives of this project (DAQ0002) were to determine: the incidence and distribution of TSV in cotton and its likely effect on yield; the thrips vector species associated with TSV infections in cotton; and the factors that may lead to systemic infections. In contrast to the extensive damage observed in sunflower and mungbean crops from the same region, TSV has caused no measurable damage in commercial cotton crops surveyed in CQ over the seasons 2008/9 to 2010/11. No TSV infected cotton was found in regions outside of CQ and the geographical distribution of TSV disease in cotton (and other susceptible hosts) appears to be closely related to the distribution of the major alternative host, parthenium weed. The most likely thrips species responsible for transmission of TSV into cotton is the tomato thrips (Frankliniella schultzei) and onion thrips (Thrips tabaci). Systemically infected plants are rarely seen in commercial crops and have also been rarely produced in controlled tests. It appears that systemic infection may be transient with only mild symptoms being produced intermittently. With current cultivars and conditions, it appears likely that TSV will continue to cause only minor levels of mild local lesions with no impact on yield in cotton crops. It appears that no specific control strategies are required to limit the impact of TSV in cotton. However, general farm hygiene to minimise the presence of the major alternative host of TSV, parthenium weed, is advised and may be of vital importance if TSV susceptible rotational crops such as mung beans are grown.

Weed management strategies for farming systems with herbicide tolerant cotton.

The introduction of glyphosate tolerant cotton has significantly improved the flexibility and management of a number of problem weeds in cotton systems. However, reliance on glyphosate poses risks to the industry in term of glyphosate resistance and species shift. The aims of this project were to identify these risks, and determine strategies to prevent and mitigate the potential for resistance evolution. Field surveys identified fleabane as the most common weed now in both irrigated and dryland system. Sowthistle has also increased in prevalence, and bladder ketmia and peachvine remained common. The continued reliance on glyphosate has favoured small seeded, and glyphosate tolerant species. Fleabane is both of these, with populations confirmed resistant in grains systems in Queensland and NSW. When species were assessed for their resistance risk, fleabane, liverseed grass, feathertop Rhodes grass, sowthistle and barnyard grass were determined to have high risk ratings. Management practices were also determined to rely heavily on glyphosate and therefore be high risk in summer fallows, and dryland glyphosate tolerant and conventional cotton. Situations were these high risk species are present in high risk cropping phases need particular attention. The confirmation of a glyphosate resistance barnyard grass population in a dryland glyphosate tolerant cotton system means resistance is now a reality for the cotton industry. However, experiments have shown that resistant populations can be managed with other herbicide options currently available. However, the options for fleabane management in cotton are still limited. Although some selective residual herbicides are showing promise, the majority of fleabane control tactics can only be used in other phases of the cotton rotation. An online glyphosate resistance tool has been developed. This tool allows growers to assess their individual glyphosate resistance risks, and how they can adjust their practices to reduce their risks. It also provides researchers with current information on weed species present and practices used across the industry. This tool will be extremely useful in tailoring future research and extension efforts. Simulations from the expanded glyphosate resistance model have shown that glyphosate resistance can be prevented and managed in glyphosate-tolerant cotton farming systems. However, for strategies to be successful, some effort is required. Simulations have shown the importance of controlling survivors of glyphosate applications, using effective glyphosate alternatives in fallows, and combining several effective glyphosate alternatives in crop, and these are the key to the prevention and management of glyphosate resistance.

AG15 (Sustainable Agricultural State-level Investment Program) natural resource management extension in irrigated cotton and grain

Natural Resource Management project developing reources and supporting best practice management for irrigated cotton and grain growers in Queensland.

Cotton Fusarium wilt management

Development of management strategies for fusarium wilt of cotton.

A multi-field bio-economic model of irrigated grain-cotton farming systems.

We present a participatory modelling framework that integrates information from interviews and discussions with farmers and consultants, with dynamic bio-economic models to answer complex questions on the allocation of limited resources at the farm business level. Interviews and discussions with farmers were used to: describe the farm business; identify relevant research questions; identify potential solutions; and discuss and learn from the whole-farm simulations. The simulations are done using a whole-farm, multi-field configuration of APSIM (APSFarm). APSFarm results were validated against farmers' experience. Once the model was accepted by the participating farmers as a fair representation of their farm business, the model was used to explore changes in the tactical or strategic management of the farm and results were then discussed to identify feasible options for improvement. Here we describe the modelling framework and present an example of the application of integrative whole farm system tools to answer relevant questions from an irrigated farm business case study near Dalby (151.27E - 27.17S), Queensland, Australia. Results indicated that even though cotton crops generates more farm income per hectare a more diversified rotation with less cotton would be relatively more profitable, with no increase in risk, as a more cotton dominated traditional rotation. Results are discussed in terms of the benefits and constraints from developing and applying more integrative approaches to represent farm businesses and their management in participatory research projects with the aim of designing more profitable and sustainable irrigated farming systems.

Relocation of Intensive Agriculture to Northern Queensland The Cotton Industry

Development of new agricultural industries in northern Australia is often perceived as a solution to changes in water availability that have occurred within southern Australia as a result of changes to government policy in response to and exacerbated by climate change. This report examines the likely private, social and community costs and benefits associated with the establishment of a cotton industry in the Burdekin. The research undertaken covers three spatial scales by modelling the response of cotton and to climate change at the crop and farm scale and linking this to regional scale modelling of the economy. Modelling crop growth as either a standalone crop or as part of a farm enterprise provides the clearest picture of how yields and water use will be affected under climate change. The alternative to this is to undertake very costly trials in environmental chambers. For this reason it is critical that funding for model development especially for crops being crop in novel environments be seen as a high priority for climate change and adaptation studies. Crop level simulations not only provide information on how the crop responds to climate change, they also illustrate that that these responses are the result of complex interactions and cannot necessarily be derived from the climate information alone. These simulations showed that climate change would lead to decreased cotton yields in 2030 and 2050 without the affect of CO2 fertilisation. Without CO2 fertilisation, yields would be decreased by 3.2% and 17.8%. Including CO2 fertilisation increased yields initially by 5.9%, but these were reduced by 3.6% in 2050. This still represents a major offset and at least ameliorates the impact of climate change on yield. To cope with the decreased in-crop rainfall (4.5% by 2030 and 15.8% in 2050) and an initial increase in evapotranspiration of 2% in 2030 and