Preliminary studies on predicting the setting season of oysters for the benefit of shellfish farmers

Preliminary findings from a spatfall forecasting programme initiated in April 1981 at Himamaylan River, Negros Occidental are presented. Two main activities are involved: 1) monitoring of daily counts of oyster larvae in the plankton; and 2) monitoring of actual setting of oysters on standardized collectors put in the vicinity of oyster farm sites. Findings indicate that when the count of mature larvae exceeds 5 per 100 ml sample and persists for at least 3 days, spat may be expected to occur shortly afterwards.

丘陵油田三间房组储层三维地质模型和砂体预测

This paper is belonging to Chinese Petrochemical Corporation's science and technology project. Although it is difficult, it has important theoretical and practical value. The study was aimed to reveal inhomogeneity of two kinds of reservoirs of fan-shaped delta and braided river by using new theories, new methods and new technology about 3-D model building and reservoir knowledge repository throughout the world, and to build reservoir knowledge repository and 3-D geological model which would predict the type of sand body forming reason and distribution rule in order to improve exploration result in Qiuling oil fields. Multi-discipline theories such as petroleum structure geology, reservoir geology, petroleum geology, sequence geology, logging geology, geomathematics and so on are used as guide. The information of geology, seism, logging and production test is combined. Outcrop area and overlap area are combined. By making full use of computer, stable structure, reservoir geometric shape, spatial distribution and inhomogeneity of bed of interest are investigated, described and characterized. Petroleum pool 3-D static geological model of reservoir knowledge repository was built. Sand body distribution was predicted. It has guided oil development, lowed the investment and improved development benefits. Several results are achieved as follows: (1) Strata framework of Sanjianfang group in Qiuling oil field has been established. (2) Geometric shape, spatial distribution and evolve rule of two different forming reason's reservoir of fan-shaped delta and braided river of Sanjianfang group in Qiuling oil field are discussed. (3) The two kinds of reservoirs have lower pore and permeability and very strong inhomogeneity. (4) Reservoir knowledge repository of two different forming reasons has been built of Sanjianfang group, which includes 5 geological knowledge sublibrary. (5) 3-D geological model of two kinds of forming reason's reservoirs has been built. (6) That same sequence instruction a simulation and probability field were used to predict sand body of Sanjianfang group was put forward. Coincidence rate is high after production test. It shows this method has great popularity value. (7) A set of theories, methods and technologies of knowledge repository of two kinds of reservoir of braided river and fan-shaped delta and 3-D geological model building were finished. (8) A set of theories, methods and technologies of investigating, describing, characterizing and predicting two kinds of oil pool were developed. It gets noticeable economic benefit after exploration. Theory and method about extrusion basin are developed.

东营凹陷岩性油气藏成藏动力学机制和预测

This paper is belonging to Chinese Petrochemical Industry Corporation's key project. Although it is very difficult, it has important theoretical and practical value. Its targets is to make lithological petroleum pool exploration great breakthrough in Dongying sag, by applying advanced theories, the last-minute methods and technology in highly explored zones. By using synthetically multi- discipline theories, methods and technology such as petroleum geology, sedimentology, structure geology, rock mechanics, dynamics of petroleum pool formation, geochemistry, geophysics and so on, and by making full use of computer , the process of petroleum pool forming and distribution rules of lithological petroleum pools have been thoroughly investigated and analyzed in sharp-slope, gentle-slope as well as low-lying region of Dongying sag including dynamic and static. With the study of tectonic stress field, fluid potential field and pressure field, we revealed dynamics condition, distribution rule, control factors and petroleum forming mechanism of lithological pool, and established the forming mode of lithological pool of Dongying sag. The main conclusion as follow: Strata framework, structure framework and sedimentary system of Dongying sag have been established which were the basis of petroleum prediction. There are three kinds of oil source which were from Es4,Es3 and mixed type, also three petroleum forming phases which were the telophase of Dongying stage, Guantao stage and Minghuazhen group, which occur in different geological environment. By using of most advanced numerical modeling software, the space distribution and time evolve of stress field and fluid potential field have been revealed from Esl up to the present. The region with low earth stress and low fluid potential were enrichment region of lithological petroleum pool and fault-block pool. The dynamics mechanism of Lithological petroleum pool in Dongying sag was collocating seal box, abnormity pressure, index number of petroleum forming and static factors on time and space, which was the most important factor of controlling petroleum pool forming, distribution and enrichment. The multi phase active and evolve of seal and unseal about different order fault were main factors of controlling petroleum pool forming of Dongying sag, which have important value for predicting lithological petroleum pool. It is revealed the lithological petroleum pool forming mode that included respective character, forming mechanism and distribution rule in four structural belt, which was a base for lithological petroleum pool prediction. The theories, technology and methods of studying, description, characterize and prediction lithological petroleum pool were established, which have important popularization value. Several lithological pool have been predicted in stress transform, zone, abrupt slope zone, fractured surface changed zone, tosional stress growth zone and abnormity pressure zone with noticeable economic benefit after exploration.

The benefit of context for facial composite construction.

Purpose - The aim of this study was to investigate whether the presence of a whole-face context during facial composite production facilitates construction of facial composite images. Design/Methodology - In Experiment 1, constructors viewed a celebrity face and then developed a facial composite using PRO-fit in one of two conditions: either the full-face was visible while facial features were selected, or only the feature currently being selected was visible. The composites were named by different participants. We then replicated the study using a more forensically-valid procedure: In Experiment 2 non-football fans viewed an image of a premiership footballer and 24 hours later constructed a composite of the face with a trained software operator. The resulting composites were named by football fans. Findings - In both studies we found that presence of the facial context promoted more identifiable facial composite images. Research limitations/implications – Though this study uses current software in an unconventional way, this was necessary to avoid error arising from between-system differences. Practical implications - Results confirm that composite software should have the whole-face context visible to witnesses throughout construction. Though some software systems do this, there remain others that present features in isolation and these findings show that these systems are unlikely to be optimal. Originality/value - This is the first study to demonstrate the importance of a full-face context for the construction of facial composite images. Results are valuable to police forces and developers of composite software.

Exploring knowledge transfer mechanisms: The case of a UK-based group within a high-tech global corporation

Jasimuddin, Sajjad, 'Exploring knowledge transfer mechanisms: The case of a UK-based group within a high-tech global corporation', International Journal of Information Management (2007) 27(4) pp.294-300 RAE2008

Integrated magnetic components for high-power high-current dc-dc converters

This thesis is focused on the design and development of an integrated magnetic (IM) structure for use in high-power high-current power converters employed in renewable energy applications. These applications require low-cost, high efficiency and high-power density magnetic components and the use of IM structures can help achieve this goal. A novel CCTT-core split-winding integrated magnetic (CCTT IM) is presented in this thesis. This IM is optimized for use in high-power dc-dc converters. The CCTT IM design is an evolution of the traditional EE-core integrated magnetic (EE IM). The CCTT IM structure uses a split-winding configuration allowing for the reduction of external leakage inductance, which is a problem for many traditional IM designs, such as the EE IM. Magnetic poles are incorporated to help shape and contain the leakage flux within the core window. These magnetic poles have the added benefit of minimizing the winding power loss due to the airgap fringing flux as they shape the fringing flux away from the split-windings. A CCTT IM reluctance model is developed which uses fringing equations to accurately predict the most probable regions of fringing flux around the pole and winding sections of the device. This helps in the development of a more accurate model as it predicts the dc and ac inductance of the component. A CCTT IM design algorithm is developed which relies heavily on the reluctance model of the CCTT IM. The design algorithm is implemented using the mathematical software tool Mathematica. This algorithm is modular in structure and allows for the quick and easy design and prototyping of the CCTT IM. The algorithm allows for the investigation of the CCTT IM boxed volume with the variation of input current ripple, for different power ranges, magnetic materials and frequencies. A high-power 72 kW CCTT IM prototype is designed and developed for use in an automotive fuelcell-based drivetrain. The CCTT IM design algorithm is initially used to design the component while 3D and 2D finite element analysis (FEA) software is used to optimize the design. Low-cost and low-power loss ferrite 3C92 is used for its construction, and when combined with a low number of turns results in a very efficient design. A paper analysis is undertaken which compares the performance of the high-power CCTT IM design with that of two discrete inductors used in a two-phase (2L) interleaved converter. The 2L option consists of two discrete inductors constructed from high dc-bias material. Both topologies are designed for the same worst-case phase current ripple conditions and this ensures a like-for-like comparison. The comparison indicates that the total magnetic component boxed volume of both converters is similar while the CCTT IM has significantly lower power loss. Experimental results for the 72 kW, (155 V dc, 465 A dc input, 420 V dc output) prototype validate the CCTT IM concept where the component is shown to be 99.7 % efficient. The high-power experimental testing was conducted at General Motors advanced technology center in Torrence, Los Angeles. Calorific testing was used to determine the power loss in the CCTT IM component. Experimental 3.8 kW results and a 3.8 kW prototype compare and contrast the ferrite CCTT IM and high dc-bias 2L concepts over the typical operating range of a fuelcell under like-for-like conditions. The CCTT IM is shown to perform better than the 2L option over the entire power range. An 8 kW ferrite CCTT IM prototype is developed for use in photovoltaic (PV) applications. The CCTT IM is used in a boost pre-regulator as part of the PV power stage. The CCTT IM is compared with an industry standard 2L converter consisting of two discrete ferrite toroidal inductors. The magnetic components are compared for the same worst-case phase current ripple and the experimental testing is conducted over the operation of a PV panel. The prototype CCTT IM allows for a 50 % reduction in total boxed volume and mass in comparison to the baseline 2L option, while showing increased efficiency.

Valuing maternity care: a comparison of stated preference methods with an application to cost-benefit analysis

This research investigates whether a reconfiguration of maternity services, which collocates consultant- and midwifery-led care, reflects demand and value for money in Ireland. Qualitative and quantitative research is undertaken to investigate demand and an economic evaluation is performed to evaluate the costs and benefits of the different models of care. Qualitative research is undertaken to identify women’s motivations when choosing place of delivery. These data are further used to inform two stated preference techniques: a discrete choice experiment (DCE) and contingent valuation method (CVM). These are employed to identify women’s strengths of preferences for different features of care (DCE) and estimate women’s willingness to pay for maternity care (CVM), which is used to inform a cost-benefit analysis (CBA) on consultant- and midwifery-led care. The qualitative research suggests women do not have a clear preference for consultant or midwifery-led care, but rather a hybrid model of care which closely resembles the Domiciliary Care In and Out of Hospital (DOMINO) scheme. Women’s primary concern during care is safety, meaning women would only utilise midwifery-led care when co-located with consultant-led care. The DCE also finds women’s preferred package of care closely mirrors the DOMINO scheme with 39% of women expected to utilise this service. Consultant- and midwifery-led care would then be utilised by 34% and 27% of women, respectively. The CVM supports this hierarchy of preferences where consultant-led care is consistently valued more than midwifery-led care – women are willing to pay €956.03 for consultant-led care and €808.33 for midwifery-led care. A package of care for a woman availing of consultant- and midwifery-led care is estimated to cost €1,102.72 and €682.49, respectively. The CBA suggests both models of care are cost-beneficial and should be pursued in Ireland. This reconfiguration of maternity services would maximise women’s utility, while fulfilling important objectives of key government policy.

Knowledge and perceptions among overweight and obese employees about lifestyle-related health benefit changes.

We investigated perceptions among overweight and obese state employees about changes to health insurance that were designed to reduce the scope of health benefits for employees who are obese or who smoke. Before implementation of health benefit plan changes, 658 state employees who were overweight (ie, those with a body mass index [BMI] of 25-29.9) or obese (ie, those with a BMI of > or = 30) enrolled in a weight-loss intervention study were asked about their attitudes and beliefs concerning the new benefit plan changes. Thirty-one percent of employees with a measured BMI of 40 or greater self-reported a BMI of less than 40, suggesting they were unaware that their current BMI would place them in a higher-risk benefit plan. More than half of all respondents reported that the new benefit changes would motivate them to make behavioral changes, but fewer than half felt confident in their ability to make changes. Respondents with a BMI of 40 or greater were more likely than respondents in lower BMI categories to oppose the new changes focused on obesity (P < .001). Current smokers were more likely than former smokers and nonsmokers to oppose the new benefit changes focused on tobacco use (P < .01). Participants represented a sample of employees enrolled in a weight-loss study, limiting generalizability to the larger population of state employees. Benefit plan changes that require employees who are obese and smoke to pay more for health care may motivate some, but not all, individuals to change their behaviors. Since confidence to lose weight was lowest among individuals in the highest BMI categories, more-intense intervention options may be needed to achieve desired health behavior changes.

Dispersal patterns in Costa Rican mantled howling monkeys

Both male and female juveniles disperse in Costa Rican mantled howling monkeys (Alouatta palliata). 79% of the males and 96% of the females leave their natal groups. Males may spend up to 4 years and females up to 1 year as solitaries. Extra-group individuals are faced with only three possibilities, i.e., form a new group by joining another extra-group individual, join an established social group, or remain solitary. Most surviving extra-group individuals join an established social group which contains no kin. Females join with the help of a resident male and once in a group proceed to rise to the alpha position through dyadic interactions. The immigrant female either becomes the alpha female or leaves and tries again in another group. Males challenge the alpha male and either defeat him or remain solitary. Competition with relatives for limited high quality food may be the reason for both sexes leaving their natal groups in howlers. By leaving, the successful immigrants increase their mothers inclusive fitness while suppressing the fitness of nonrelatives instead of remaining natal and competing with relatives for limited food. © 1992 Plenum Publishing Corporation.

Critical friends benefit realisation

The U&I programme Critical Friends (CFs) are developing guidelines on the role of the Critical Friend and the way in which this links with U&I programme model, projects and outputs. The critical friends are also in the process of building a new online community of shared effective practice for current and future critical friends. The CF Benefits Realisation project aims to synthesise existing CF U&I, JISC Curriculum Design and Delivery, JISC Institutional Innovation and related programmes, activities, methodologies and approaches to produce a range of specialist guidelines and other outputs for effective CF practice, within the context of the aims and objectives of the JISC U&I programme. We aim to disseminate these to a wide range of interests within the JISC HE-FE communities, following consultation.

A thematic cost-benefit analysis of a marine protected area

The implementation of Marine Protected Areas (MPAs) is ultimately a social endeavour to sustain or improve human well-being via the conservation of marine ecosystems. The degree to which ecological gains are realised can depend upon how economic, ecological and social costs (negative impacts) and benefits (positive impacts) are included in the designation and management process. Without the support of key stakeholder groups whose user rights have been affected by the creation of an MPA, human impacts cannot be reduced. This study analyses a three year dataset to understand the themes associated with the economic, environmental and social costs and benefits of an MPA in Lyme Bay, United Kingdom (UK) following its establishment in 2008. Methodologically, the paper presents an ecosystem based management framework for analysing costs and benefits. Two hundred and forty one individuals were interviewed via questionnaire between 2008 and 2010 to determine perceptions and the level of support towards the MPA. Results reveal that despite the contentious manner in which this MPA was established, support for the MPA is strong amongst the majority of stakeholder groups. The level of support and the reasons given for support vary between stakeholder groups. Overall, the stakeholders perceive the social, economic and environmental benefits of the MPA to outweigh the perceived costs. There have been clear social costs of the MPA policy and these have been borne by mobile and static gear fishermen and charter boat operators. Local support for this MPA bodes well for the development of a network of MPAs around the UK coast under the United Kingdom Marine and Coastal Access Act 2009. However, this initial optimism is at risk if stakeholder expectation is not managed and the management vacuum is not filled.