The coal bearing Cenozoic As Pontes Basin (NW Spain): Geological influence on its coal's characteristics

Lignite deposits in the Cenozoic As Pontes strike-slip basin (northwestern Spain)were formed as a function of specific paleoclimatic conditions and tectonic evolution of the basin.

Late mesozoic to neogene radiolarian biostratigraphy and palaeoceanography in the Caribbean and East pacific region

^Raduolarians constitute a good tool for contributing to the biostratigraphy of accreted terranes and in deep-sea sediment sequences. The use of radiolarians is also proven to be valuable as a palaeoceanographic indicator. The present study evaluates radiolarians in three different geological settings, in order to better constrain the age of the sites and to try to understand their palaeoenvironmental situation at different periods, particularly in the Caribbean-Central America area. On the Jarabacoa Block, in Central Dominican Republic, a hundred meters of siliceous mudstones (Pedro Brand section in the Tireo Group) was dated as Turonian- Coniancian in age using radiolarians. A 40Ar-39Ar whole rock age of 75.1±1.1 Ma (Campanian), obtained in a basalt dyke crosscutting the radiolarian bearing rocks, a consistent minimum age for the pelagic-hemipelagic Pedro Brand section. The Jarabacoa Block is considered as the most complete outcrop section of Pacific ocean crust overlain by a first Aptian-Albian phase of Caribbean Large Igneous Province-type activity (CLIP), followed by the development of a Cenomanian-Santonian intraoceanic arc, which is in turn overlain by a late Campanian-Maastrichtian CLIP-phase. The Tireo Group records an episode of pelagic to hemi-pelagic and intermediate to acidic arc-derived sedimentation, previous to the youngest magmatic phase of the CLIP. Thus, the section of Pedro Brand has been interpreted in this study as being part of the intraoceanic arc. In northern Venezuela, a greenish radiolarite section from Siquisique Ophiolite (basalts, gabbros and some associated cherts) in Guaparo Creek has been studied. In previous studies, the Ophiolite unit (Petacas Creek section) has been dated as Bajocian-Bathonian, based on ammonites present in interpillow sediments from basalt blocks. New dating of the present study concluded in an Aptian?-Albian-Cenomanian age for the Guaparo creek section (middle Cretaceous), based on radiolarian assemblage associated to basalts-gabbros rocks of the unit. Previous plagioclase 40Ar-39Ar ages from the Siquisuique Ophiolite may be slightly younger (94-90 Ma.) and may, therefore, represent younger dykes that intruded onto a well-developed sheeted dyke complex of the Siquisique. The geochemistry of these rocks and the palaeotectonic reconstruction of the Caribbean area during this period suggest that these rocks were derived from a mid-ocean ridge with an influence of deep mantle plume. The Siquisique Ophiolite most probably represents a fragment of the proto-Caribbean basin. The Integrated Ocean Drilling Program Expedition 344 drilled a transect across the convergent margin off Costa Rica. Two sites of this expedition were chosen for radiolarian biostratigraphy and palaeoceanographic studies. Both sites (U1381C and U1414A) are located in the incoming Cocos plate, in the eastern Equatorial Pacific. The succession of U1381C yields a Middle Miocene to Pleistocene age, and presents an important hiatus of approximately 10 Ma. The core of U1414A exposes a continuous sequence that deposited during Late Miocene to Pleistocene (radiolarian zones RN6-RN16). The ages were assigned based on radiolarians and correlated with nannofossil zonation and tephra 40Ar-39Ar datation. With those results, and considering the northward movement of the Cocos plate motion (about 7 cm/year), deduction is made that the sites U1381C and U1414A were initially deposited during the Miocene, several hundreds of kilometres from the current location, slightly south of the Equator. This suggests that the faunas of these sites have been subjected to different currents, first influenced by the cold tongue of the South Equatorial Current and followed by the warm Equatorial Countercurrent. At last, coastal upwelling influenced faunas of the Pleistocene. -- Les radiolaires sont considérés comme un outil utile à la biostratigraphie des terrains accrétés et des sédiments profonds. Leur utilité est aussi prouvée comme étant remarquable au niveau des reconstructions paléocéanographiques. La présente étude évalue l'importance et la présence des radiolaires de trois localités géologiquement différentes d'Amérique Centrale-Caraïbes, dans le but d'améliorer les model d'âges et de mieux comprendre la situation paléoenvironnementale à travers le temps. Dans le Bloque de Jarabacoa, au centre de la République Dominicaine, une section de cent mètres (section de Pedro Brand, Groupe de Tireo) a été datée comme faisant partie du Turonien-Santonien, en utilisant les radiolaires. Une datation 40Ar-39Ar sur roche totale de 75±1.1 Ma (Campanien) a été obtenu pour vin dyke traversant les sédiments riches en radiolaires, en cohérence avec l'âge minimum accordé à la section de Pedro Brand. Aux Caraïbes, le Bloque de Jarabacoa est considéré comme l'affleurement le plus complet présentant une succession de croûte océanique d'origine Pacifique recouverte d'une première phase d'activité volcanique de type CLIP (Caribbean Large Igneous Province) d'âge Aptien- Albien, de dépôts d'arc volcanique intra-océanique d'âge Cénomanien-Santonien, puis d'une seconde phase de type CLIP d'âge Campanien-Maastrichtien. Le Groupe de Tireo enregistre un épisode de dépôt pélagiques-hémipélagiques et d'arc volcanique, antérieur à la plus jeune phase de type CLIP. Cette étude place donc la formation de la section de Pedro Brand au moment du développement de l'arc intra-océanique. A Guaparo Creek (nord du Vénézuela), une section de radiolarite verdâtre faisant partie des ophiolites de Siquisique (basaltes, gabbros, cherts) a été étudiée. Dans des études précédentes, sur la localité de Petacas Creek, l'unité ophiolitique a été daté d'âge Bajocien- Bathonien (Jurassique) sur la base d'ammonites trouvées dans des sédiments intercalés entre des laves en coussins. Les nouvelles datations de notre étude, basées sur des assemblages à radiolaires de l'unité à basaltes-gabbros, donnent un âge Aptien?-Albien-Cénomanien (Crétacé moyen). Les âges de l'Ophiolite de Siquisique, précédement calculés par la méthode sur plagioclases, pourraient être légèrement plus jeune (94-90 Ma) et donc représenter des intrusions plus récentes de dykes dans le complexe filonien déjà bien dévelopé. La géochimie de ces roches magmatiques, ainsi que les reconstructions paléotectoniques de la zone Caraïbes durant cette période, suggèrent que ces formations sont dérivées d'une ride médio-océanique associée à l'influence d'un panache mantellique. L'ophiolite de Siquisique représente très probablement un fragment du bassin de proto¬Caraïbe. L'expédition 344 du programme IODP (Integrated Ocean Drilling Program) a eu lieu dans l'optique de forer et dresser une coupe de la marge convergente au large du Costa Rica. Deux sites de cette expédition ont été choisis pour les besoins des études de biostratigraphie et de reconstruction paléocéanographique. Ces deux sites (U1381C et U1414A) sont situés sur la plaque subductante de Cocos, dans la zone Pacifique est-équatoriale. La carotte U1381C expose une séquence s'étalant du Miocène moyen au Pléistocène, et présente un important hiatus d'environ 10 Ma. La carotte U1414A expose une séquence continue s'étalant du Miocène tardif au Pléistocène (zone à radiolaires RN6-RN16). Les âges ont été assignés sur la base des radiolaires et corrélés avec les zones à nanofossiles et les datations 40Ar-39Ar sur téphras. Avec ces résultats, et en considérant le mouvement nord de la plaque de Cocos (environ 7 cm/an), déduction est faite que les deux sites étaient initialement situés, au cours du Miocène, à plusieurs centaines de kilomètres de leur location actuelle, au sud de l'équateur. Cela suggère que les faunes de ces sites ont été sujettes à différents courants; premièrement influencées par la langue froide du SEC (South Equatorial Current), puis par les eaux chaudes du ECC (Equatorial Countercurrent). Pour terminer, les remontées d'eau côtières ont influencées les faunes Pléistocène.

Late and postmagmatic alterations in the tin-bearing batholith of Ricobayo (Iberian Massif, NW Spain)

The deuteric alteration processes undergone by the granites of the Ricobayo Batholith were: microclinization, chloritization, albitization, muscovitization, tourmalinization and garnetization. These processes must be interpreted in a dynamic context so that the different reactions that take place are the consequence of a successive interaction between rock and fluids. The physicochemical conditions deduced from these fluids are: temperature lower than 600 OC, pressure between 1.5 and 1 Kb, fugacity of oxygen between 10-25 and 10-35 bars, fugacity of sulphur lower than 10-l5 bars, the composition was kept stable and their log (a(K+)/a(Ht)) and log (a(Na+)/a(H+)) varied between 3.8 and 3.2 and between 3.5 and 4.6, respectively, and the pH of the fluids was higher than 5 during the microclinization, muscovitization and tourmalinization, and lower during chloritization and albitization. The deposition of cassiterite occurs with pH episodes that exceed 5.

Formoterol treatment downregulates the myostatin system in skeletal muscle of cachectic tumour-bearing rats

Cachexia is a common systemic manifestation. Additionally, myostatin is known to be a negative regulator of skeletal muscle development. The present study aimed to investigate whether formoterol down-regulates the myostatin system in skeletal muscle of tumour-bearing rats. Real-time PCR and Western blotting were used for the analysis. Results showed that rats bearing the Yoshida AH-130 ascites hepatoma, a cachexia-inducing tumour, exhibited marked muscle wasting that affected the mass of the muscles studied. The cachectic animals exhibited a significant increase in the mRNA levels of the myostatin receptor (ActIIB) in gastrocnemius muscles. Notably, the expression of the various forms of follistatin, a protein with the opposite effects to those of myostatin, was significantly reduced as a result of the implantation of the tumour. When the animals were treated with formoterol, a β-agonist with anti-cachectic potential, increases in skeletal muscle weights were observed. The β-agonist significantly increased levels of various follistatin isoforms and significantly decreased the expression levels of the myostatin receptor. In addition, formoterol treatment resulted in a significant decrease of the myostatin protein content of the gastrocnemius muscle. In conclusion, the results presented indicate that certain anabolic actions of formoterol on the skeletal muscle of cachectic animals may be mediated via the myostatin system.

Non-Linear Journal Bearing Model for Analysis of Superharmonic Vibrations of Rotor Systems

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

Shot-noise spectroscopy of energy resolved ballistic currents

We investigate the shot noise of nonequilibrium carriers injected into a ballistic conductor and interacting via long-range Coulomb forces. Coulomb interactions are shown to act as an energy analyzer of the profile of injected electrons by means of the fluctuations of the potential barrier at the emitter contact. We show that the details in the energy profile can be extracted from shot-noise measurements in the Coulomb interaction regime, but cannot be obtained from time-averaged quantities or shot-noise measurements in the absence of interactions.

Synthesis of resorcinolic lipids bearing structural similarities to cytosporone A

Inspired by the structure and biological activities of resorcinolic lipids and, particularly cytosporone A- a potent inhibitor of plantule germination and growth, we have performed the synthesis of the analogs 3-heptyl-3-hydroxy-5,7-dimethoxy-2-benzofuran-1(3H)-one (1) and 3-heptyl-3-hydroxy-4,6-dimethoxy-2-benzofuran-1(3H)-one (2). The intermediates and products were submitted to allelopathic test using Lactuca sativa L. seeds. Target compound 1 showed an inhibitory effect on germination and growth of hypocotyl and radicle in milimolar range.

Broadband excitation in the system identification of active magnetic bearing rotor systems

One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.

Evaluation of skin sensitivity in dogs bearing allergic dermatitis to standardized allergenic extract of house dust and storage mites

The objective of the study was to evaluate whether allergenic extracts of five house dust and storage mite species standardized for humans might be used for the diagnosis of canine atopic dermatitis (CAD). Extracts of Dermatophagoides pteronyssinus (Pyroglyphidae), D. farinae (Pyroglyphidae), Blomia tropicalis (Glycyphagidae), Lepidoglyphus destructor (Glycyphagidae) and Tyrophagus putrescentiae (Acaridae) were evaluated by intradermal testing in 20 healthy dogs (control) and 25 dogs with allergic dermatitis. A significant difference in the response was observed between the two groups (p<0.05). Only one dog (5%) in the control group reacted to the intradermal test, whereas 14 dogs (56%) in the allergic group were positive for at least one extract (odds ratio = 24.2). Most of the positive reactions observed in the allergic group occurred against the extracts of T. putrescentiae or L. destructor, each inducing reactions in 10 dogs (40%). D. farinae, D. pteronyssinus e B. tropicalis extracts induced reactions in 7 (28%), 3 (12%) and 3 (12%) dogs, respectively. The allergenic extracts standardized for humans evaluated in the present study may be used as a tool to complement the diagnosis of the disease, as well as to select potential allergen candidates for allergen-specific immunotherapy.

One chip solution for low-cost active magnetic bearing system

In this work the implementation of the active magnetic bearing control system in a single FPGA is studied. Requirements for the full magnetic bearing control system are reviewed. Different control methods for active magnetic bearings are described shortly. Flux and the current base controllers are implemented in a FPGA. Suitability of the con-trollers for a low-cost magnetic bearing application is studied. Floating-point arithmetic’s are used in the controllers to ease designing burden and improve calculation precision. Per-formance of the flux controller is verified with simulations.

Vibration analysis for Bearing outer race condition diagnostics

This paper investigates defect detection methodologies for rolling element bearings through vibration analysis. Specifically, the utility of a new signal processing scheme combining the High Frequency Resonance Technique (HFRT) and Adaptive Line Enhancer (ALE) is investigated. The accelerometer is used to acquire data for this analysis, and experimental results have been obtained for outer race defects. Results show the potential effectiveness of the signal processing technique to determine both the severity and location of a defect. The HFRT utilizes the fact that much of the energy resulting from a defect impact manifests itself in the higher resonant frequencies of a system. Demodulation of these frequency bands through use of the envelope technique is then employed to gain further insight into the nature of the defect while further increasing the signal to noise ratio. If periodic, the defect frequency is then present in the spectra of the enveloped signal. The ALE is used to enhance the envelope spectrum by reducing the broadband noise. It provides an enhanced envelope spectrum with clear peaks at the harmonics of a characteristic defect frequency. It is implemented by using a delayed version of the signal and the signal itself to decorrelate the wideband noise. This noise is then rejected by the adaptive filter that is based upon the periodic information in the signal. Results have been obtained for outer race defects. They show the effectiveness of the methodology to determine both the severity and location of a defect. In two instances, a linear relationship between signal characteristics and defect size is indicated.

Chaotic Behaviour of Active Magnetic Bearing System by Time Series Analysis

Chaotic behaviour is one of the hardest problems that can happen in nonlinear dynamical systems with severe nonlinearities. It makes the system's responses unpredictable. It makes the system's responses to behave similar to noise. In some applications it should be avoided. One of the approaches to detect the chaotic behaviour is nding the Lyapunov exponent through examining the dynamical equation of the system. It needs a model of the system. The goal of this study is the diagnosis of chaotic behaviour by just exploring the data (signal) without using any dynamical model of the system. In this work two methods are tested on the time series data collected from AMB (Active Magnetic Bearing) system sensors. The rst method is used to nd the largest Lyapunov exponent by Rosenstein method. The second method is a 0-1 test for identifying chaotic behaviour. These two methods are used to detect if the data is chaotic. By using Rosenstein method it is needed to nd the minimum embedding dimension. To nd the minimum embedding dimension Cao method is used. Cao method does not give just the minimum embedding dimension, it also gives the order of the nonlinear dynamical equation of the system and also it shows how the system's signals are corrupted with noise. At the end of this research a test called runs test is introduced to show that the data is not excessively noisy.

Single axis controlled attraction type magnetic bearing

This paper presents a new type of magnetic bearing with active control only in axial direction. The bearing uses two pairs of permanent magnets working in attraction mode to restrict the radial motion and a control system composed of two electromagnets, a gap sensor and a controller to keep the axis in a fixed axial position. The principle, the dynamic model for axial motion and the control system for this bearing are presented. Finally, by experiments conducted in a prototype, the effectiveness of the presented concept is shown.

Aktiivisen verkkosillan tuottaman yhteismuotoisen jännitteen vaimentaminen kaksitasoisessa, jännitevälipiirillisessä, taajuusmuuttajatopologiassa

Pulssinleveysmoduloidun vaihtosuuntaajan hyötysuhteen parantaminen ja kytkentätaajuuden suurentaminen ovat johtaneet lähtöjännitteen suuritaajuiseen taajuussisältöön kaksitasoisessa, jännitevälipiirillisessä taajuusmuuttajatopologiassa. Kasvava tarve siirtää tehoa myös verkkoon päin on lisännyt aktiivisen verkkosillan käyttöä. Kaksitasoisen aktiivisen verkkosillan vaikutuksesta DC-välipiirin keskipisteen ja kolmivaiheisen kuorman tähtipisteen välinen jännite on nollasta poikkeava aiheuttaen suurentuneen yhteismuotoisen jännitteen taajuusmuuttajan lähtöön ja verkon puolelle. Lisäksi yhteismuotoisten jännitteiden aiheuttamat kytkentätaajuiset häiriövirrat voivat aiheuttaa vikavirtasuojien tahatonta laukeamista, vaikeuttaa EMC-standardien vaatimusten täyttämistä, lisätä moottorin käämieristyksien rasitusta ja mahdollisuutta moottorin laakerivaurioille. Diplomityössä tutkitaan aktiivisen ja passiivisen verkkosillan tuottamaa yhteismuotoista jännitettä simuloinneilla. Esitellään aikaisempaa tutkimustietoa yhteismuotoisen jännitteen ja virran vaimennusratkaisuista aktiivista verkkosiltaa käytettäessä. Tutkimustiedon pohjalta suunnitellaan koelaitteistolle soveltuva suodin. Suotimen toiminta testataan simuloinnein sekä kokeellisin mittauksin. Tehdyt mittaukset osoittavat, että suunniteltu suodin vaimentaa yhteismuotoista jännitettä noin 20 dB verkkosillan kytkentätaajuudella ja tämän jälkeen yli 20 dB/dekadi taajuuteen 100 kHz asti. Lisäksi yhteismuotoisen virran suuruus syöttökaapelin kautta pieneni ehdotetun suotimen vaikutuksesta.