Preparation of gas-filled porous microparticles (GPPs) and microbubbles (MBs) by PGSS method

Dissertation to obtain the Master Degree in Biotechnology

Preparation and characterization of microfiltration flat polymeric membranes for biomedical applications

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Evaluation of Leishmania antigens preparation and storage for use in enzyme immunoassays

The influence of time and temperature on the storage of an alkaline antigen of L.major-like and L.(V.) braziliensis promastigotes added or not of a proteases inhibitor (PMSF) was evaluted by means of an IgG-ELISA. Antibodies in assays using L. major-like antigen stored at -20oC for 6 monsths had a statistically lower geometric mean titer (GMT) and different 95% confidence interval limits (CL) than antigens stored otherwise, as assessed by the "t" statistic. The PMSF L. major-like antigen after storage for 6 months at a temperature of 4oC had the same GMT and 95% CL displayed at time zero as well as when storage for 4 and 6 months at -20oC. Significant diferences were not found when L.(V.) braziliensis antigens were stored at times and temperatures mentioned; the PMSF antigen stored for 2 months at -70oC resulted in a lower serum GMT and 95% CL than any other, as assessed by the "t" statistic. Antigen performance did not show any statistical difference associated to the addition of PMSF within the same species; the largest difference between antigens was that between PMSF-L. (V.) braziliensis and L. major-like without PMSF.

Double-walled PLLA/PLGA particles for the sustained release of Meloxicam: preparation, characterisation and contolled release studies

There were two main objectives in this thesis investigation, first, the production, characterisation, in vitro degradation and release studies of double walled microspheres for drug release control. The second one, and the most challenging, was the production of double walled nanospheres, also for drug control delivery. The spheres were produced using two polymers, the Poly(L-lactide)Acid, PLLA, and the Poly(L-lactide-co-glycolic)Acid, PLGA.Afterwards, a model drug, Meloxicam, which is an antiinflammatory drug, was encapsulated into the particles. Micro and nanospheres were produced by the solvent extraction/evaporation method, where perfect spherical particles were obtained. By varying the polymers PLLA/PLGA mass ratio, different core and shell composition, as well as several shell and core thickness were observed. In the particles with a PLLA/PLGA mass ratio 1:1, the shell is composed by PLLA and the core by PLGA. It was also verified that the Meloxicam has a tendency to be distributed in the PLGA layer. Micro and nanoparticles were characterised in morphology, size, polymer cristalinity properties and drug distribution. Particles degradation studies was performed, where the particles in a PVA solution of pH 7,4 where placed in an incubator, during approximately 40 days, at 120rpm, and 37ºC, simulating, as much as possible, the human body environment. From these studies, the conclusion was that particles containing a PLGA shell and a PLLA core degrade more rapidly, due to the fact that PLLA is more hydrophobic than the PLGA. Concerning the drug release controlled results, done also for 40 and 50 days, they showed that the microspheres containing a shell of PLLA release more slowly than when the shell is composed of PLGA. This result was predictable, since the drug is solubilised in the PLGA polymer and so, in that case, the PLLA shell works like a barrier between the drug and the outer medium. Another positive aspect presented by this study is the lower initial burst effect, obtained when using double walled particles, which is one of the advantages of the same. In a second part of this investigation, the production of the nanospheres was the main goal, since it was not yet accomplished by other authors or investigators. After several studies, referring to the speed, time and type of agitation, as well as, the concentration and volume of the first aqueous solution of poly-vinyl-alcohol (PVA) during the process of solvent extraction/evaporation it was possible to obtain double walled nanospheres.(...)

Case study preparation: The whatsApp acquisition from Facebook

The purpose of this work project is to analyze the acquisition of WhatsApp from Facebook occurred on 19th February 2014. The main research has the aim to understand if the price tag of $19 billion paid by Mark Zuckerberg was fair. Along the reaction of Facebook’s EPS on the keydays after the purchase, a balanced assessment of the acquisition was obtained and discussed. Results suggest that the price tag could be reasonable. However, taking into account the industry in which the two companies operate, where competition is quite intense, Facebook should assess this deal in a longerterm perspective.

Bowel preparation for colonoscopy: comparison of mannitol and sodium phosphate. Results of a prospective randomized study

METHOD: Eighty patients were prospectively randomized for precolonoscopic cleansing either with 750 ml of 10% mannitol (Group M) or 180 ml of a sodium phosphate preparation (Group NaP). Laboratory examinations before and after preparation on all patients included hemoglobin, hematocrit, sodium, potassium, phosphorous, calcium and serum osmolarity. A questionnaire was used to assess undesirable side effects and patient tolerance to the solution. The quality of preparation was assessed by the endoscopist who was unaware of the solution employed. RESULTS: Statistically significant changes were verified in serum sodium, phosphorous, potassium and calcium between the two groups, but no clinical symptoms were observed. There were no significant differences in the frequency of side effects studied. Six of the eight patients in Group NaP who had taken mannitol for a previous colonoscopy claimed better acceptance of the sodium phosphate solution. The endoscopic-blinded trial reported excellent or good bowel preparation in 85% prepared with sodium phosphate versus 82.5% for mannitol (p=0.37). CONCLUSIONS: Quality of preparation and frequency of side effects was similar in the two solutions. The smaller volume of sodium phosphate necessary for preparation seems to be related to its favorable acceptance. Nevertheless, the retention of sodium and phosphate ions contraindicates the use of sodium phosphate in patients with renal failure, cirrhosis, ascites, and heart failure.

Qualitative risk assessment during polymer mortar test specimens preparation - methods comparison

Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.

Atividade inseticida do óleo essencial de Tanaecium nocturnum (Barb. Rodr.) Bur. & K. Shum (Bignoneaceae) sobre Sitophilus zeamais Motsch. (Coleoptera: Curculionidae)

O óleo essencial extraído de folhas frescas de Tanaecium nocturnum (Barb. Rodr.) Bur.& K. Shum por destilação de arraste a vapor foi avaliado quanto à toxicidade a Sitophilus zeamais Motsch., principal praga do milho armazenado. Papel de filtro e grãos de milho foram impregnados pelo óleo para se avaliar o efeito por via de contato (papel-filtro) e fumigação, respectivamente. Para avaliação do efeito da aplicação tópica 0,5 µl das diferentes concentrações do óleo foram aplicadas em adultos do inseto. A partir de uma ampla faixa de concentrações, foram determinadas as mais promissoras para os bioensaios definitivos. Na determinação das dose/concentrações-letais (DL50 e CL50) foi utilizada a análise de Probit, realizando-se também, uma análise de regressão linear conjunta de todos os dados de mortalidade. O óleo de T. nocturnum foi considerado tóxico para S. zeamais baseado nos seguintes valores: CL50 de 14,1 ng.cm-2 e CL50 de 1.321,6 ng.g-1 de grãos para os efeitos de contacto (papel-filtro) e fumigação, respectivamente, e DL50 de 14,7 µg.mg-1 de inseto para efeito tópico. Porcentagens de mortalidade próximas a 100 % foram obtidas nas concentrações de: 2 e 5 % (m/v) (contato), 3 4, e 5 % (m/v) (fumigação) e 10 % (m/v) para o efeito de aplicação tópica. O presente estudo mostrou que o ácido cianídrico, liberado do óleo essencial de T. nocturnum por hidrólise, pode ter atividade inseticida para S. zeamais e que concentrações acima de 4 % (m/v) são promissoras no controle do inseto.

Nonsolvent induced phase separation preparation of poly(vinylidene fluoride-co-chlorotrifluoroethylene) membranes with tailored morphology, piezoelectric phase content and mechanical properties

Poly(vinylidene fluoride-co-chlorotrifluoroethylene) – P(VDF-CTFE) membranes are increasingly interesting for a wide range of applications, including battery separators, filtration membranes and biomedical applications. This work reports on the morphology, hydrophobicity, thermal and mechanical properties variation of P(VDF-CTFE) membranes processed by nonsolvent induced phase separation technique (NIPS) as a function of the main processing parameters. All membranes show a porous structure composed of large spherulites, (interconnected) micropores and/or microvoids depending on the processing conditions used that in turn affect their hydrophobicity and mechanical properties. The degree of crystallinity of the membranes remains approximately constant with a value of about 15 %, except for the membranes immediately immersed in ethanol, which is of about 23 %. In turn, the crystalline phases present in the copolymer is mainly affected by the temperature and nonsolvent characteristics of the coagulation bath, the β-phase content ranging from 33 to 100 %, depending on those processing parameters. It was show that the temperature of water-based coagulation bath plays an important role in order to produce structurally uniform and homogeneous porous membranes, which is particularly important from the point of view of technological applications.

State of the art and open questions on cathode preparation based on carbon coated lithium iron phosphate

One important component with particular relevance in battery performance is the cathode, being one of the main responsible elements for cell capacity and cycle life. Carbon coated lithium iron phosphate, C-LiFePO4, active material is one of the most promising cathode materials for the next generation of large scale lithium ion battery applications and strong research efforts are being devoted to it, due to its excellent characteristics, including high capacity, ~170 mAh/g, and safety. This review summarizes the main developments on C-LiFePO4 based cathode film preparation and performance. The effect of the binder, conductive additive, relationship between active material-binder-conductive additive and drying step, in the electrode film fabrication and performance is presented and discussed. Finally, after the presentation of the cell types fabricated with C-LiFePO4 active material and their performance, some conclusions and guidelines for further investigations are outlined.

Ação fungitóxica do óleo essencial de Tanaecium nocturnum (Barb. Rodr.) Bur. e K. Shum sobre o Aspergillus flavus isolado da castanha-do-Brasil (Bertholletia excelsa)

Neste trabalho, avaliou-se a capacidade fungitóxica do óleo essencial de folhas frescas de Tanaecium nocturnum sobre o Aspergillus flavus isolado da castanha-do-brasil, por meio das técnicas de contato e fumigação. Pelos resultados dos bioensaios realizados até 10 dias de incubação, verificou-se que a inibição total do crescimento micelial ocorreu quando se utilizou o óleo essencial nas concentrações de 782 ppm (técnica de contato) e 1000 ppm (técnica de fumigação). Em ambas as técnicas, o óleo essencial inibiu a esporulação a partir da concentração de 500 ppm. Observou-se que nos cinco primeiros dias de incubação não houve diferença significativa nos resultados apresentados pelas duas técnicas estudadas, havendo a partir daí uma redução da atividade do óleo essencial nas concentrações inferiores a 1000 ppm pelo teste de fumigação. A ação fungitóxica do óleo essencial sobre o microrganismo estudado pode ser atribuída à presença do benzaldeído (composto majoritário do óleo essencial estudado), em associação com outros compostos também presentes nesse óleo essencial, tais como; álcool benzílico, benzoato de benzila e mandelonitrila.

Evaluation of antinociceptive and anti-inflammatory activities of the topical preparation of Cipura paludosa (Iridaceae)

Alho do mato (Cipura paludosa, Iridaceae) is a medicinal plant found in the Amazon rain forest, North of Brazil. It has been used to treat algic, inflammatory and infectious processes. The aim of this study was to evaluate the anti-inflammatory and antinociceptive action of the crude Cipura paludosa ethanolic extract at concentrations ranging between 2.0 and 4.0% in Oil and Water cream formulations for topical use. The physical-chemical stability of the formulations was monitored over a six-month period with the use of accelerated stability tests. In order to evaluate the anti-inflammatory and antinociceptive activities, we used a paw edema test induced by carrageenan and a formalin test, respectively. The paw edema test showed that there was a statistical difference in the control group in relation to the treatments. The formalin test did not confirm antinociceptive action of the treatments with the extract in the early phase of the test. However, statistical difference was confirmed for the treatments in relation to the control in the late phase. The antinociceptive and anti-inflammatory activities of Cipura paludosa preparations, as demonstrated in the results, at least partially support the ethno-medical uses of this plant.

Chitosan-based scaffolds for tissue regeneration: preparation and microstructure characterization

Scaffolds are porous three-dimensional supports, designed to mimic the extracellular environment and remain temporarily integrated into the host tissue while stimulating, at the molecular level, specific cellular responses to each type of body tissues. The major goal of the research work entertained herein was to study the microstructure of scaffolds made from chitosan (Ch), blends of chitosan and sodium alginate (Ch/NaAlg), blends of chitosan, sodium alginate and calcium chloride (Ch/NaAlg/CaCl2) and blends of chitosan, sodium alginate and hydroxyapatite (Ch/NaAlg/HA). Scaffolds possessing ideal physicochemical properties facilitate cell proliferation and greatly increase the rate of recovery of a damaged organ tissue. Using CT three-dimensional images of the scaffolds, it was observed that all scaffolds had a porosity in the range 64%-92%, a radius of maximum pore occurrence in the range 95m-260m and a permeability in the range 1×10-10-18×10-10 m2. From the results obtained, the scaffolds based on Ch, Ch/NaAlg and Ch/NaAlg/CaCl2 would be most appropriate both for the growth of osteoid and for bone tissue regeneration, while the scaffold made with a blend of Ch/NaAlg/HA, by possessing larger pores size, might be used as a support for fibrovascular tissue.